Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-27 07:01:24 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/include/ide.h

82 lines
2 KiB
C
Raw Normal View History

Initial revision
2002-08-27 10:38:37 +00:00
/*
* (C) Copyright 2000
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
Add GPL-2.0+ SPDX-License-Identifier to source files Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com>
2013-07-08 07:37:19 +00:00
* SPDX-License-Identifier: GPL-2.0+
Initial revision
2002-08-27 10:38:37 +00:00
*/
#ifndef _IDE_H
#define _IDE_H
dm: Add a new header for block devices At present block devices are tied up with partitions. But not all block devices have partitions within them. They are in fact separate concepts. Create a separate blk.h header file for block devices. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Stephen Warren <swarren@nvidia.com>
2016-02-29 22:25:39 +00:00
#include <blk.h>
ide: Correct IDE_BUS(dev) macro The IDE_BUS(dev) macro was previously doing dev >> 1. This however is a mis-match of the usage in common/cmd_ide.c and would cause boards with multiple ports / devices to not correctly detect all devices. For more details please see: http://lists.denx.de/pipermail/u-boot/2012-April/122525.html [Tom Rini: Reword commit message only] Tested-by: Luka Perkov <uboot@lukaperkov.net> Signed-off-by: Simon Baatz <gmbnomis@gmail.com> Signed-off-by: Tom Rini <trini@ti.com>
2012-05-14 09:29:10 +00:00
#define IDE_BUS(dev) (dev / (CONFIG_SYS_IDE_MAXDEVICE / CONFIG_SYS_IDE_MAXBUS))
Initial revision
2002-08-27 10:38:37 +00:00
rename CFG_ macros to CONFIG_SYS Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-10-16 13:01:15 +00:00
#define ATA_CURR_BASE(dev) (CONFIG_SYS_ATA_BASE_ADDR+ide_bus_offset[IDE_BUS(dev)])
change all versions of input_data() and output_data() to global weak aliases This changes input_data() and friends from static function to global symbols under weak alias, to enable board specific overrides (and therefore get rid of board-specific code in cmd_ide.c) Also declare ide_bus_offset in the header file, so other files can use ATA_CURR_BASE as well. Signed-off-by: Pavel Herrmann <morpheus.ibis@gmail.com>
2012-10-09 07:04:39 +00:00
extern ulong ide_bus_offset[];
IDE: - make ide_inb () and ide_outb () "weak", so boards can define there own I/O functions. (Needed for the pcs440ep board). - The default I/O Functions are again 8 Bit accesses. - Added CONFIG_CMD_IDE for the pcs440ep Board. Signed-off-by: Heiko Schocher <hs@denx.de>
2007-08-28 15:39:14 +00:00
Initial revision
2002-08-27 10:38:37 +00:00
#ifdef CONFIG_IDE_LED
/*
* LED Port
*/
#define LED_PORT ((uchar *)(PER8_BASE + 0x3000))
#define LED_IDE1 0x01
#define LED_IDE2 0x02
#define DEVICE_LED(d) ((d & 2) | ((d & 2) == 0)) /* depends on bit positions! */
ide: add missing prototype Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
2014-10-08 20:58:04 +00:00
void ide_led(uchar led, uchar status);
Initial revision
2002-08-27 10:38:37 +00:00
#endif /* CONFIG_IDE_LED */
/*
* Function Prototypes
*/
[PATCH 1_4] Merge common get_dev() routines for block devices Each of the filesystem drivers duplicate the get_dev routine. This change merges them into a single function in part.c Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2007-02-20 08:04:34 +00:00
void ide_init(void);
dm: Drop the block_dev_desc_t typedef Use 'struct' instead of a typdef. Also since 'struct block_dev_desc' is long and causes 80-column violations, rename it to struct blk_desc. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Stephen Warren <swarren@nvidia.com>
2016-02-29 22:25:34 +00:00
struct blk_desc;
ulong ide_read(struct blk_desc *block_dev, lbaint_t blknr, lbaint_t blkcnt,
block: pass block dev not num to read/write/erase() This will allow the implementation to make use of data in the block_dev structure beyond the base device number. This will be useful so that eMMC block devices can encompass the HW partition ID rather than treating this out-of-band. Equally, the existence of the priv field is crying out for this patch to exist. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2015-12-07 18:38:48 +00:00
void *buffer);
dm: Drop the block_dev_desc_t typedef Use 'struct' instead of a typdef. Also since 'struct block_dev_desc' is long and causes 80-column violations, rename it to struct blk_desc. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Stephen Warren <swarren@nvidia.com>
2016-02-29 22:25:34 +00:00
ulong ide_write(struct blk_desc *block_dev, lbaint_t blknr, lbaint_t blkcnt,
Fix block device accesses beyond 2TiB With CONFIG_SYS_64BIT_LBA, lbaint_t gets defined as a 64-bit type, which is required to represent block numbers for storage devices that exceed 2TiB (the block size usually is 512B), e.g. recent hard drives. For some obscure reason, the current U-Boot code uses lbaint_t for the number of blocks to read (a rather optimistic estimation of how RAM sizes will evolve), but not for the starting address. Trying to access blocks beyond the 2TiB boundary will simply wrap around and read a block within the 0..2TiB range. We now use lbaint_t for block start addresses, too. This required changes to all block drivers as the signature of block_read(), block_write() and block_erase() in block_dev_desc_t changed. Signed-off-by: Sascha Silbe <t-uboot@infra-silbe.de>
2013-06-14 11:07:25 +00:00
const void *buffer);
Initial revision
2002-08-27 10:38:37 +00:00
split mpc8xx hooks from cmd_ide.c move most of mpc8xx hooks from cmd_ide.c into ide_preinit() and newly created ide_init_postreset() (invoked after calling ide_reset after ide_preinit), some cleanup to make checkpatch happy, enable IDE init hooks in configs of affected boards. confusingly, these hooks are used by more than just mpc8xx-based boards, and therefore are placed in arch/ppc/lib/ note: checkpatch still emits warnings about using volatile Signed-off-by: Pavel Herrmann <morpheus.ibis@gmail.com>
2012-10-09 07:01:56 +00:00
#ifdef CONFIG_IDE_PREINIT
int ide_preinit(void);
#endif
#ifdef CONFIG_IDE_INIT_POSTRESET
int ide_init_postreset(void);
#endif
mucmc52, uc101: delete ata@3a00 node, if no CF card is detected U-Boot can detect if an IDE device is present or not. If not, and this new config option is activated, U-Boot removes the ATA node from the DTS before booting Linux, so the Linux IDE driver does not probe the device and crash. This is needed for buggy hardware (uc101) where no pull down resistor is connected to the signal IDE5V_DD7. Signed-off-by: Heiko Schocher <hs@denx.de>
2009-09-23 05:56:08 +00:00
#if defined(CONFIG_OF_IDE_FIXUP)
int ide_device_present(int dev);
#endif
cmd_ide: enhance new feature "CONFIG_IDE_AHB" Although most IDE controller is designed to be connected to PCI bridge, there are still some IDE controller support AHB interface for SoC design. The driver implementation of these IDE-AHB controllers differ from other IDE-PCI controller, some additional registers and commands access is required during CMD/DATA I/O. Hence a configuration "CONFIG_IDE_AHB" in cmd_ide.c is required to be defined to support these kinds of SoC controllers. Such as Faraday's FTIDE020 series and Global Unichip's UINF-0301. Signed-off-by: Macpaul Lin <macpaul@andestech.com>
2011-04-11 20:45:32 +00:00
#if defined(CONFIG_IDE_AHB)
unsigned char ide_read_register(int dev, unsigned int port);
void ide_write_register(int dev, unsigned int port, unsigned char val);
void ide_read_data(int dev, ulong *sect_buf, int words);
block: constify sect_buf argument of ide_write_data Add a const keyword to the sect_buf argument of ide_write_data to fix the following warning: cmd_ide.c: In function '__ide_output_data': cmd_ide.c:548: warning: passing argument 2 of 'ide_write_data' discards qualifiers from pointer target type /devel/u-boot.git/include/ide.h:76: note: expected 'ulong *' but argument is of type 'const ulong *' Also modify the driver-model documentation to match with the new prototype. Compile tested only. Cc: Macpaul Lin <macpaul@andestech.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
2013-05-26 10:11:28 +00:00
void ide_write_data(int dev, const ulong *sect_buf, int words);
cmd_ide: enhance new feature "CONFIG_IDE_AHB" Although most IDE controller is designed to be connected to PCI bridge, there are still some IDE controller support AHB interface for SoC design. The driver implementation of these IDE-AHB controllers differ from other IDE-PCI controller, some additional registers and commands access is required during CMD/DATA I/O. Hence a configuration "CONFIG_IDE_AHB" in cmd_ide.c is required to be defined to support these kinds of SoC controllers. Such as Faraday's FTIDE020 series and Global Unichip's UINF-0301. Signed-off-by: Macpaul Lin <macpaul@andestech.com>
2011-04-11 20:45:32 +00:00
#endif
change all versions of input_data() and output_data() to global weak aliases This changes input_data() and friends from static function to global symbols under weak alias, to enable board specific overrides (and therefore get rid of board-specific code in cmd_ide.c) Also declare ide_bus_offset in the header file, so other files can use ATA_CURR_BASE as well. Signed-off-by: Pavel Herrmann <morpheus.ibis@gmail.com>
2012-10-09 07:04:39 +00:00
/*
* I/O function overrides
*/
common: cmd_ide: use __weak and add prototypes clang chokes about the concept of having an alias to an always_inlined function. gcc likely just ignores the always inlined since binary sizes are equal before and after this patch. Convert the aliases to weak functions and provide missing prototypes. cc: Pavel Herrmann <morpheus.ibis@gmail.com> Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
2014-07-12 13:07:19 +00:00
unsigned char ide_inb(int dev, int port);
void ide_outb(int dev, int port, unsigned char val);
change all versions of input_data() and output_data() to global weak aliases This changes input_data() and friends from static function to global symbols under weak alias, to enable board specific overrides (and therefore get rid of board-specific code in cmd_ide.c) Also declare ide_bus_offset in the header file, so other files can use ATA_CURR_BASE as well. Signed-off-by: Pavel Herrmann <morpheus.ibis@gmail.com>
2012-10-09 07:04:39 +00:00
void ide_input_swap_data(int dev, ulong *sect_buf, int words);
void ide_input_data(int dev, ulong *sect_buf, int words);
void ide_output_data(int dev, const ulong *sect_buf, int words);
void ide_input_data_shorts(int dev, ushort *sect_buf, int shorts);
void ide_output_data_shorts(int dev, ushort *sect_buf, int shorts);
common: cmd_ide: use __weak and add prototypes clang chokes about the concept of having an alias to an always_inlined function. gcc likely just ignores the always inlined since binary sizes are equal before and after this patch. Convert the aliases to weak functions and provide missing prototypes. cc: Pavel Herrmann <morpheus.ibis@gmail.com> Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
2014-07-12 13:07:19 +00:00
void ide_led(uchar led, uchar status);
Adjust board_r.c for ppc This adds ppc features to the generic post-relocation board init. Signed-off-by: Simon Glass <sjg@chromium.org>
2013-03-14 07:20:12 +00:00
/**
* board_start_ide() - Start up the board IDE interfac
*
* @return 0 if ok
*/
int board_start_ide(void);
Initial revision
2002-08-27 10:38:37 +00:00
#endif /* _IDE_H */
Reference in a new issue Copy permalink