u-boot/arch/x86/cpu/broadwell/pch.c

542 lines
14 KiB
C
Raw Normal View History

/*
* Copyright (c) 2016 Google, Inc
*
* SPDX-License-Identifier: GPL-2.0
*/
#include <common.h>
#include <dm.h>
#include <pch.h>
#include <asm/cpu.h>
#include <asm/gpio.h>
#include <asm/i8259.h>
#include <asm/intel_regs.h>
#include <asm/io.h>
#include <asm/ioapic.h>
#include <asm/lpc_common.h>
#include <asm/pch_common.h>
#include <asm/arch/cpu.h>
#include <asm/arch/gpio.h>
#include <asm/arch/iomap.h>
#include <asm/arch/pch.h>
#include <asm/arch/pm.h>
#include <asm/arch/rcb.h>
#include <asm/arch/spi.h>
#define BIOS_CTRL 0xdc
bool cpu_is_ult(void)
{
u32 fm = cpu_get_family_model();
return fm == BROADWELL_FAMILY_ULT || fm == HASWELL_FAMILY_ULT;
}
static int broadwell_pch_early_init(struct udevice *dev)
{
struct gpio_desc desc;
struct udevice *bus;
pci_dev_t bdf;
int ret;
dm_pci_write_config32(dev, PCH_RCBA, RCB_BASE_ADDRESS | 1);
dm_pci_write_config32(dev, PMBASE, ACPI_BASE_ADDRESS | 1);
dm_pci_write_config8(dev, ACPI_CNTL, ACPI_EN);
dm_pci_write_config32(dev, GPIO_BASE, GPIO_BASE_ADDRESS | 1);
dm_pci_write_config8(dev, GPIO_CNTL, GPIO_EN);
/* Enable IOAPIC */
writew(0x1000, RCB_REG(OIC));
/* Read back for posted write */
readw(RCB_REG(OIC));
/* Set HPET address and enable it */
clrsetbits_le32(RCB_REG(HPTC), 3, 1 << 7);
/* Read back for posted write */
readl(RCB_REG(HPTC));
/* Enable HPET to start counter */
setbits_le32(HPET_BASE_ADDRESS + 0x10, 1 << 0);
setbits_le32(RCB_REG(GCS), 1 << 5);
/*
* Enable PP3300_AUTOBAHN_EN after initial GPIO setup
* to prevent possible brownout. This will cause the GPIOs to be set
* up if it has not been done already.
*/
ret = gpio_request_by_name(dev, "power-enable-gpio", 0, &desc,
GPIOD_IS_OUT | GPIOD_IS_OUT_ACTIVE);
if (ret)
return ret;
/* 8.14 Additional PCI Express Programming Steps, step #1 */
bdf = PCI_BDF(0, 0x1c, 0);
bus = pci_get_controller(dev);
pci_bus_clrset_config32(bus, bdf, 0xf4, 0x60, 0);
pci_bus_clrset_config32(bus, bdf, 0xf4, 0x80, 0x80);
pci_bus_clrset_config32(bus, bdf, 0xe2, 0x30, 0x30);
return 0;
}
static void pch_misc_init(struct udevice *dev)
{
/* Setup SLP signal assertion, SLP_S4=4s, SLP_S3=50ms */
dm_pci_clrset_config8(dev, GEN_PMCON_3, 3 << 4 | 1 << 10,
1 << 3 | 1 << 11 | 1 << 12);
/* Prepare sleep mode */
clrsetio_32(ACPI_BASE_ADDRESS + PM1_CNT, SLP_TYP, SCI_EN);
/* Setup NMI on errors, disable SERR */
clrsetio_8(0x61, 0xf0, 1 << 2);
/* Disable NMI sources */
setio_8(0x70, 1 << 7);
/* Indicate DRAM init done for MRC */
dm_pci_clrset_config8(dev, GEN_PMCON_2, 0, 1 << 7);
/* Clear status bits to prevent unexpected wake */
setbits_le32(RCB_REG(0x3310), 0x0000002f);
clrsetbits_le32(RCB_REG(0x3f02), 0x0000000f, 0);
/* Enable PCIe Relaxed Order */
setbits_le32(RCB_REG(0x2314), 1 << 31 | 1 << 7);
setbits_le32(RCB_REG(0x1114), 1 << 15 | 1 << 14);
/* Setup SERIRQ, enable continuous mode */
dm_pci_clrset_config8(dev, SERIRQ_CNTL, 0, 1 << 7 | 1 << 6);
};
static void pch_enable_ioapic(void)
{
u32 reg32;
/* Make sure this is a unique ID within system */
io_apic_set_id(0x04);
/* affirm full set of redirection table entries ("write once") */
reg32 = io_apic_read(0x01);
/* PCH-LP has 39 redirection entries */
reg32 &= ~0x00ff0000;
reg32 |= 0x00270000;
io_apic_write(0x01, reg32);
/*
* Select Boot Configuration register (0x03) and
* use Processor System Bus (0x01) to deliver interrupts.
*/
io_apic_write(0x03, 0x01);
}
/* Enable all requested GPE */
void enable_all_gpe(u32 set1, u32 set2, u32 set3, u32 set4)
{
outl(set1, ACPI_BASE_ADDRESS + GPE0_EN(GPE_31_0));
outl(set2, ACPI_BASE_ADDRESS + GPE0_EN(GPE_63_32));
outl(set3, ACPI_BASE_ADDRESS + GPE0_EN(GPE_94_64));
outl(set4, ACPI_BASE_ADDRESS + GPE0_EN(GPE_STD));
}
/*
* Enable GPIO SMI events - it would be good to put this in the GPIO driver
* but it would need a new driver operation.
*/
int enable_alt_smi(struct udevice *pch, u32 mask)
{
struct pch_lp_gpio_regs *regs;
u32 gpiobase;
int ret;
ret = pch_get_gpio_base(pch, &gpiobase);
if (ret) {
debug("%s: invalid GPIOBASE address (%08x)\n", __func__,
gpiobase);
return -EINVAL;
}
regs = (struct pch_lp_gpio_regs *)gpiobase;
setio_32(regs->alt_gpi_smi_en, mask);
return 0;
}
static int pch_power_options(struct udevice *dev)
{
int pwr_on_after_power_fail = MAINBOARD_POWER_OFF;
const char *state;
u32 enable[4];
u16 reg16;
int ret;
dm_pci_read_config16(dev, GEN_PMCON_3, &reg16);
reg16 &= 0xfffe;
switch (pwr_on_after_power_fail) {
case MAINBOARD_POWER_OFF:
reg16 |= 1;
state = "off";
break;
case MAINBOARD_POWER_ON:
reg16 &= ~1;
state = "on";
break;
case MAINBOARD_POWER_KEEP:
reg16 &= ~1;
state = "state keep";
break;
default:
state = "undefined";
}
dm_pci_write_config16(dev, GEN_PMCON_3, reg16);
debug("Set power %s after power failure.\n", state);
/* GPE setup based on device tree configuration */
ret = fdtdec_get_int_array(gd->fdt_blob, dev->of_offset,
"intel,gpe0-en", enable, ARRAY_SIZE(enable));
if (ret)
return -EINVAL;
enable_all_gpe(enable[0], enable[1], enable[2], enable[3]);
/* SMI setup based on device tree configuration */
enable_alt_smi(dev, fdtdec_get_int(gd->fdt_blob, dev->of_offset,
"intel,alt-gp-smi-enable", 0));
return 0;
}
/* Magic register settings for power management */
static void pch_pm_init_magic(struct udevice *dev)
{
dm_pci_write_config8(dev, 0xa9, 0x46);
clrbits_le32(RCB_REG(0x232c), 1),
setbits_le32(RCB_REG(0x1100), 0x0000c13f);
clrsetbits_le32(RCB_REG(0x2320), 0x60, 0x10);
writel(0x00012fff, RCB_REG(0x3314));
clrsetbits_le32(RCB_REG(0x3318), 0x000f0330, 0x0dcf0400);
writel(0x04000000, RCB_REG(0x3324));
writel(0x00041400, RCB_REG(0x3368));
writel(0x3f8ddbff, RCB_REG(0x3388));
writel(0x00007001, RCB_REG(0x33ac));
writel(0x00181900, RCB_REG(0x33b0));
writel(0x00060A00, RCB_REG(0x33c0));
writel(0x06200840, RCB_REG(0x33d0));
writel(0x01010101, RCB_REG(0x3a28));
writel(0x040c0404, RCB_REG(0x3a2c));
writel(0x9000000a, RCB_REG(0x3a9c));
writel(0x03808033, RCB_REG(0x2b1c));
writel(0x80000009, RCB_REG(0x2b34));
writel(0x022ddfff, RCB_REG(0x3348));
writel(0x00000001, RCB_REG(0x334c));
writel(0x0001c000, RCB_REG(0x3358));
writel(0x3f8ddbff, RCB_REG(0x3380));
writel(0x0001c7e1, RCB_REG(0x3384));
writel(0x0001c7e1, RCB_REG(0x338c));
writel(0x0001c000, RCB_REG(0x3398));
writel(0x00181900, RCB_REG(0x33a8));
writel(0x00080000, RCB_REG(0x33dc));
writel(0x00000001, RCB_REG(0x33e0));
writel(0x0000040c, RCB_REG(0x3a20));
writel(0x01010101, RCB_REG(0x3a24));
writel(0x01010101, RCB_REG(0x3a30));
dm_pci_clrset_config32(dev, 0xac, 0x00200000, 0);
setbits_le32(RCB_REG(0x0410), 0x00000003);
setbits_le32(RCB_REG(0x2618), 0x08000000);
setbits_le32(RCB_REG(0x2300), 0x00000002);
setbits_le32(RCB_REG(0x2600), 0x00000008);
writel(0x00007001, RCB_REG(0x33b4));
writel(0x022ddfff, RCB_REG(0x3350));
writel(0x00000001, RCB_REG(0x3354));
/* Power Optimizer */
setbits_le32(RCB_REG(0x33d4), 0x08000000);
/*
* This stops the LCD from turning on:
* setbits_le32(RCB_REG(0x33c8), 0x08000080);
*/
writel(0x0000883c, RCB_REG(0x2b10));
writel(0x1e0a4616, RCB_REG(0x2b14));
writel(0x40000005, RCB_REG(0x2b24));
writel(0x0005db01, RCB_REG(0x2b20));
writel(0x05145005, RCB_REG(0x3a80));
writel(0x00001005, RCB_REG(0x3a84));
setbits_le32(RCB_REG(0x33d4), 0x2fff2fb1);
setbits_le32(RCB_REG(0x33c8), 0x00008000);
};
static int pch_type(struct udevice *dev)
{
u16 type;
dm_pci_read_config16(dev, PCI_DEVICE_ID, &type);
return type;
}
/* Return 1 if PCH type is WildcatPoint */
static int pch_is_wpt(struct udevice *dev)
{
return ((pch_type(dev) & 0xfff0) == 0x9cc0) ? 1 : 0;
}
/* Return 1 if PCH type is WildcatPoint ULX */
static int pch_is_wpt_ulx(struct udevice *dev)
{
u16 lpcid = pch_type(dev);
switch (lpcid) {
case PCH_WPT_BDW_Y_SAMPLE:
case PCH_WPT_BDW_Y_PREMIUM:
case PCH_WPT_BDW_Y_BASE:
return 1;
}
return 0;
}
static u32 pch_read_soft_strap(int id)
{
clrbits_le32(SPI_REG(SPIBAR_FDOC), 0x00007ffc);
setbits_le32(SPI_REG(SPIBAR_FDOC), 0x00004000 | id * 4);
return readl(SPI_REG(SPIBAR_FDOD));
}
static void pch_enable_mphy(struct udevice *dev)
{
u32 data_and = 0xffffffff;
u32 data_or = (1 << 14) | (1 << 13) | (1 << 12);
data_or |= (1 << 0);
if (pch_is_wpt(dev)) {
data_and &= ~((1 << 7) | (1 << 6) | (1 << 3));
data_or |= (1 << 5) | (1 << 4);
if (pch_is_wpt_ulx(dev)) {
/* Check if SATA and USB3 MPHY are enabled */
u32 strap19 = pch_read_soft_strap(19);
strap19 &= ((1 << 31) | (1 << 30));
strap19 >>= 30;
if (strap19 == 3) {
data_or |= (1 << 3);
debug("Enable ULX MPHY PG control in single domain\n");
} else if (strap19 == 0) {
debug("Enable ULX MPHY PG control in split domains\n");
} else {
debug("Invalid PCH Soft Strap 19 configuration\n");
}
} else {
data_or |= (1 << 3);
}
}
pch_iobp_update(0xCF000000, data_and, data_or);
}
static void pch_init_deep_sx(bool deep_sx_enable_ac, bool deep_sx_enable_dc)
{
if (deep_sx_enable_ac) {
setbits_le32(RCB_REG(DEEP_S3_POL), DEEP_S3_EN_AC);
setbits_le32(RCB_REG(DEEP_S5_POL), DEEP_S5_EN_AC);
}
if (deep_sx_enable_dc) {
setbits_le32(RCB_REG(DEEP_S3_POL), DEEP_S3_EN_DC);
setbits_le32(RCB_REG(DEEP_S5_POL), DEEP_S5_EN_DC);
}
if (deep_sx_enable_ac || deep_sx_enable_dc) {
setbits_le32(RCB_REG(DEEP_SX_CONFIG),
DEEP_SX_WAKE_PIN_EN | DEEP_SX_GP27_PIN_EN);
}
}
/* Power Management init */
static void pch_pm_init(struct udevice *dev)
{
debug("PCH PM init\n");
pch_init_deep_sx(false, false);
pch_enable_mphy(dev);
pch_pm_init_magic(dev);
if (pch_is_wpt(dev)) {
setbits_le32(RCB_REG(0x33e0), 1 << 4 | 1 << 1);
setbits_le32(RCB_REG(0x2b1c), 1 << 22 | 1 << 14 | 1 << 13);
writel(0x16bf0002, RCB_REG(0x33e4));
setbits_le32(RCB_REG(0x33e4), 0x1);
}
pch_iobp_update(0xCA000000, ~0UL, 0x00000009);
/* Set RCBA 0x2b1c[29]=1 if DSP disabled */
if (readl(RCB_REG(FD)) & PCH_DISABLE_ADSPD)
setbits_le32(RCB_REG(0x2b1c), 1 << 29);
}
static void pch_cg_init(struct udevice *dev)
{
struct udevice *bus = pci_get_controller(dev);
u32 reg32;
u16 reg16;
ulong val;
/* DMI */
setbits_le32(RCB_REG(0x2234), 0xf);
dm_pci_read_config16(dev, GEN_PMCON_1, &reg16);
reg16 &= ~(1 << 10); /* Disable BIOS_PCI_EXP_EN for native PME */
if (pch_is_wpt(dev))
reg16 &= ~(1 << 11);
else
reg16 |= 1 << 11;
reg16 |= 1 << 5 | 1 << 6 | 1 << 7 | 1 << 12;
reg16 |= 1 << 2; /* PCI CLKRUN# Enable */
dm_pci_write_config16(dev, GEN_PMCON_1, reg16);
/*
* RCBA + 0x2614[27:25,14:13,10,8] = 101,11,1,1
* RCBA + 0x2614[23:16] = 0x20
* RCBA + 0x2614[30:28] = 0x0
* RCBA + 0x2614[26] = 1 (IF 0:2.0@0x08 >= 0x0b)
*/
clrsetbits_le32(RCB_REG(0x2614), 0x64ff0000, 0x0a206500);
/* Check for 0:2.0@0x08 >= 0x0b */
pci_bus_read_config(bus, PCI_BDF(0, 0x2, 0), 0x8, &val, PCI_SIZE_8);
if (pch_is_wpt(dev) || val >= 0x0b)
setbits_le32(RCB_REG(0x2614), 1 << 26);
setbits_le32(RCB_REG(0x900), 0x0000031f);
reg32 = readl(RCB_REG(CG));
if (readl(RCB_REG(0x3454)) & (1 << 4))
reg32 &= ~(1 << 29); /* LPC Dynamic */
else
reg32 |= (1 << 29); /* LPC Dynamic */
reg32 |= 1 << 31; /* LP LPC */
reg32 |= 1 << 30; /* LP BLA */
if (readl(RCB_REG(0x3454)) & (1 << 4))
reg32 &= ~(1 << 29);
else
reg32 |= 1 << 29;
reg32 |= 1 << 28; /* GPIO Dynamic */
reg32 |= 1 << 27; /* HPET Dynamic */
reg32 |= 1 << 26; /* Generic Platform Event Clock */
if (readl(RCB_REG(BUC)) & PCH_DISABLE_GBE)
reg32 |= 1 << 23; /* GbE Static */
if (readl(RCB_REG(FD)) & PCH_DISABLE_HD_AUDIO)
reg32 |= 1 << 21; /* HDA Static */
reg32 |= 1 << 22; /* HDA Dynamic */
writel(reg32, RCB_REG(CG));
/* PCH-LP LPC */
if (pch_is_wpt(dev))
clrsetbits_le32(RCB_REG(0x3434), 0x1f, 0x17);
else
setbits_le32(RCB_REG(0x3434), 0x7);
/* SPI */
setbits_le32(RCB_REG(0x38c0), 0x3c07);
pch_iobp_update(0xCE00C000, ~1UL, 0x00000000);
}
static void systemagent_init(void)
{
/* Enable Power Aware Interrupt Routing */
clrsetbits_8(MCHBAR_REG(MCH_PAIR), 0x7, 0x4); /* Fixed Priority */
/*
* Set bits 0+1 of BIOS_RESET_CPL to indicate to the CPU
* that BIOS has initialized memory and power management
*/
setbits_8(MCHBAR_REG(BIOS_RESET_CPL), 3);
debug("Set BIOS_RESET_CPL\n");
/* Configure turbo power limits 1ms after reset complete bit */
mdelay(1);
cpu_set_power_limits(28);
}
static int broadwell_pch_init(struct udevice *dev)
{
int ret;
/* Enable upper 128 bytes of CMOS */
setbits_le32(RCB_REG(RC), 1 << 2);
/*
* TODO: TCO timer halt - this hangs
* setio_16(ACPI_BASE_ADDRESS + TCO1_CNT, TCO_TMR_HLT);
*/
/* Disable unused device (always) */
setbits_le32(RCB_REG(FD), PCH_DISABLE_ALWAYS);
pch_misc_init(dev);
/* Interrupt configuration */
pch_enable_ioapic();
/* Initialize power management */
ret = pch_power_options(dev);
if (ret)
return ret;
pch_pm_init(dev);
pch_cg_init(dev);
systemagent_init();
return 0;
}
static int broadwell_pch_probe(struct udevice *dev)
{
if (!(gd->flags & GD_FLG_RELOC))
return broadwell_pch_early_init(dev);
else
return broadwell_pch_init(dev);
}
static int broadwell_pch_get_spi_base(struct udevice *dev, ulong *sbasep)
{
u32 rcba;
dm_pci_read_config32(dev, PCH_RCBA, &rcba);
/* Bits 31-14 are the base address, 13-1 are reserved, 0 is enable */
rcba = rcba & 0xffffc000;
*sbasep = rcba + 0x3800;
return 0;
}
static int broadwell_set_spi_protect(struct udevice *dev, bool protect)
{
return lpc_set_spi_protect(dev, BIOS_CTRL, protect);
}
static int broadwell_get_gpio_base(struct udevice *dev, u32 *gbasep)
{
dm_pci_read_config32(dev, GPIO_BASE, gbasep);
*gbasep &= PCI_BASE_ADDRESS_IO_MASK;
return 0;
}
static const struct pch_ops broadwell_pch_ops = {
.get_spi_base = broadwell_pch_get_spi_base,
.set_spi_protect = broadwell_set_spi_protect,
.get_gpio_base = broadwell_get_gpio_base,
};
static const struct udevice_id broadwell_pch_ids[] = {
{ .compatible = "intel,broadwell-pch" },
{ }
};
U_BOOT_DRIVER(broadwell_pch) = {
.name = "broadwell_pch",
.id = UCLASS_PCH,
.of_match = broadwell_pch_ids,
.probe = broadwell_pch_probe,
.ops = &broadwell_pch_ops,
};