mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-18 10:48:51 +00:00
421 lines
9 KiB
Text
421 lines
9 KiB
Text
|
// SPDX-License-Identifier: GPL-2.0
|
||
|
/*
|
||
|
* Copyright (C) 2017 exceet electronics GmbH
|
||
|
* Copyright (C) 2018 Kontron Electronics GmbH
|
||
|
* Copyright (c) 2019 Krzysztof Kozlowski <krzk@kernel.org>
|
||
|
*/
|
||
|
|
||
|
#include <dt-bindings/gpio/gpio.h>
|
||
|
|
||
|
/ {
|
||
|
gpio-leds {
|
||
|
compatible = "gpio-leds";
|
||
|
pinctrl-names = "default";
|
||
|
pinctrl-0 = <&pinctrl_gpio_leds>;
|
||
|
|
||
|
led1 {
|
||
|
label = "debug-led1";
|
||
|
gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
|
||
|
default-state = "off";
|
||
|
linux,default-trigger = "heartbeat";
|
||
|
};
|
||
|
|
||
|
led2 {
|
||
|
label = "debug-led2";
|
||
|
gpios = <&gpio5 3 GPIO_ACTIVE_LOW>;
|
||
|
default-state = "off";
|
||
|
};
|
||
|
|
||
|
led3 {
|
||
|
label = "debug-led3";
|
||
|
gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
|
||
|
default-state = "off";
|
||
|
};
|
||
|
};
|
||
|
|
||
|
pwm-beeper {
|
||
|
compatible = "pwm-beeper";
|
||
|
pwms = <&pwm8 0 5000>;
|
||
|
};
|
||
|
|
||
|
reg_3v3: regulator-3v3 {
|
||
|
compatible = "regulator-fixed";
|
||
|
regulator-name = "3v3";
|
||
|
regulator-min-microvolt = <3300000>;
|
||
|
regulator-max-microvolt = <3300000>;
|
||
|
};
|
||
|
|
||
|
reg_5v: regulator-5v {
|
||
|
compatible = "regulator-fixed";
|
||
|
regulator-name = "5v";
|
||
|
regulator-min-microvolt = <5000000>;
|
||
|
regulator-max-microvolt = <5000000>;
|
||
|
};
|
||
|
|
||
|
reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
|
||
|
compatible = "regulator-fixed";
|
||
|
regulator-name = "usb_otg1_vbus";
|
||
|
regulator-min-microvolt = <5000000>;
|
||
|
regulator-max-microvolt = <5000000>;
|
||
|
gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>;
|
||
|
enable-active-high;
|
||
|
};
|
||
|
|
||
|
reg_vref_adc: regulator-vref-adc {
|
||
|
compatible = "regulator-fixed";
|
||
|
regulator-name = "vref-adc";
|
||
|
regulator-min-microvolt = <3300000>;
|
||
|
regulator-max-microvolt = <3300000>;
|
||
|
};
|
||
|
};
|
||
|
|
||
|
&adc1 {
|
||
|
pinctrl-names = "default";
|
||
|
pinctrl-0 = <&pinctrl_adc1>;
|
||
|
num-channels = <3>;
|
||
|
vref-supply = <®_vref_adc>;
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&can2 {
|
||
|
pinctrl-names = "default";
|
||
|
pinctrl-0 = <&pinctrl_flexcan2>;
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&ecspi1 {
|
||
|
cs-gpios = <&gpio4 26 GPIO_ACTIVE_HIGH>;
|
||
|
pinctrl-names = "default";
|
||
|
pinctrl-0 = <&pinctrl_ecspi1>;
|
||
|
status = "okay";
|
||
|
|
||
|
eeprom@0 {
|
||
|
compatible = "anvo,anv32e61w", "atmel,at25";
|
||
|
reg = <0>;
|
||
|
spi-max-frequency = <20000000>;
|
||
|
spi-cpha;
|
||
|
spi-cpol;
|
||
|
pagesize = <1>;
|
||
|
size = <8192>;
|
||
|
address-width = <16>;
|
||
|
};
|
||
|
};
|
||
|
|
||
|
&fec1 {
|
||
|
pinctrl-0 = <&pinctrl_enet1>;
|
||
|
/delete-node/ mdio;
|
||
|
};
|
||
|
|
||
|
&fec2 {
|
||
|
pinctrl-names = "default";
|
||
|
pinctrl-0 = <&pinctrl_enet2 &pinctrl_enet2_mdio>;
|
||
|
phy-mode = "rmii";
|
||
|
phy-handle = <ðphy2>;
|
||
|
status = "okay";
|
||
|
|
||
|
mdio {
|
||
|
#address-cells = <1>;
|
||
|
#size-cells = <0>;
|
||
|
|
||
|
ethphy1: ethernet-phy@1 {
|
||
|
reg = <1>;
|
||
|
micrel,led-mode = <0>;
|
||
|
clocks = <&clks IMX6UL_CLK_ENET_REF>;
|
||
|
clock-names = "rmii-ref";
|
||
|
};
|
||
|
|
||
|
ethphy2: ethernet-phy@2 {
|
||
|
reg = <2>;
|
||
|
micrel,led-mode = <0>;
|
||
|
clocks = <&clks IMX6UL_CLK_ENET2_REF>;
|
||
|
clock-names = "rmii-ref";
|
||
|
};
|
||
|
};
|
||
|
};
|
||
|
|
||
|
&i2c1 {
|
||
|
clock-frequency = <100000>;
|
||
|
pinctrl-names = "default";
|
||
|
pinctrl-0 = <&pinctrl_i2c1>;
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&i2c4 {
|
||
|
clock-frequency = <100000>;
|
||
|
pinctrl-names = "default";
|
||
|
pinctrl-0 = <&pinctrl_i2c4>;
|
||
|
status = "okay";
|
||
|
|
||
|
rtc@32 {
|
||
|
compatible = "epson,rx8900";
|
||
|
reg = <0x32>;
|
||
|
};
|
||
|
};
|
||
|
|
||
|
&pwm8 {
|
||
|
pinctrl-names = "default";
|
||
|
pinctrl-0 = <&pinctrl_pwm8>;
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&uart1 {
|
||
|
pinctrl-names = "default";
|
||
|
pinctrl-0 = <&pinctrl_uart1>;
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&uart2 {
|
||
|
pinctrl-names = "default";
|
||
|
pinctrl-0 = <&pinctrl_uart2>;
|
||
|
linux,rs485-enabled-at-boot-time;
|
||
|
rs485-rx-during-tx;
|
||
|
rs485-rts-active-low;
|
||
|
uart-has-rtscts;
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&uart3 {
|
||
|
pinctrl-names = "default";
|
||
|
pinctrl-0 = <&pinctrl_uart3>;
|
||
|
fsl,uart-has-rtscts;
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&uart4 {
|
||
|
pinctrl-names = "default";
|
||
|
pinctrl-0 = <&pinctrl_uart4>;
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&usbotg1 {
|
||
|
pinctrl-names = "default";
|
||
|
pinctrl-0 = <&pinctrl_usbotg1>;
|
||
|
dr_mode = "otg";
|
||
|
srp-disable;
|
||
|
hnp-disable;
|
||
|
adp-disable;
|
||
|
over-current-active-low;
|
||
|
vbus-supply = <®_usb_otg1_vbus>;
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&usbotg2 {
|
||
|
dr_mode = "host";
|
||
|
disable-over-current;
|
||
|
vbus-supply = <®_5v>;
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&usdhc1 {
|
||
|
pinctrl-names = "default";
|
||
|
pinctrl-0 = <&pinctrl_usdhc1>;
|
||
|
cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
|
||
|
keep-power-in-suspend;
|
||
|
wakeup-source;
|
||
|
vmmc-supply = <®_3v3>;
|
||
|
voltage-ranges = <3300 3300>;
|
||
|
bus-width = <4>;
|
||
|
no-1-8-v;
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&usdhc2 {
|
||
|
pinctrl-names = "default", "state_100mhz", "state_200mhz";
|
||
|
pinctrl-0 = <&pinctrl_usdhc2>;
|
||
|
pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
|
||
|
pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
|
||
|
non-removable;
|
||
|
keep-power-in-suspend;
|
||
|
wakeup-source;
|
||
|
vmmc-supply = <®_3v3>;
|
||
|
voltage-ranges = <3300 3300>;
|
||
|
bus-width = <4>;
|
||
|
no-1-8-v;
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&wdog1 {
|
||
|
pinctrl-names = "default";
|
||
|
pinctrl-0 = <&pinctrl_wdog>;
|
||
|
fsl,ext-reset-output;
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&iomuxc {
|
||
|
pinctrl-0 = <&pinctrl_reset_out &pinctrl_gpio>;
|
||
|
|
||
|
pinctrl_adc1: adc1grp {
|
||
|
fsl,pins = <
|
||
|
MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0xb0
|
||
|
MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0xb0
|
||
|
MX6UL_PAD_GPIO1_IO08__GPIO1_IO08 0xb0
|
||
|
>;
|
||
|
};
|
||
|
|
||
|
pinctrl_ecspi1: ecspi1grp {
|
||
|
fsl,pins = <
|
||
|
MX6UL_PAD_CSI_DATA07__ECSPI1_MISO 0x100b1
|
||
|
MX6UL_PAD_CSI_DATA06__ECSPI1_MOSI 0x100b1
|
||
|
MX6UL_PAD_CSI_DATA04__ECSPI1_SCLK 0x100b1
|
||
|
MX6UL_PAD_CSI_DATA05__GPIO4_IO26 0x100b1 /* ECSPI1-CS1 */
|
||
|
>;
|
||
|
};
|
||
|
|
||
|
pinctrl_enet2: enet2grp {
|
||
|
fsl,pins = <
|
||
|
MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN 0x1b0b0
|
||
|
MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER 0x1b0b0
|
||
|
MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x1b0b0
|
||
|
MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x1b0b0
|
||
|
MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN 0x1b0b0
|
||
|
MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x1b0b0
|
||
|
MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x1b0b0
|
||
|
MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x4001b009
|
||
|
>;
|
||
|
};
|
||
|
|
||
|
pinctrl_enet2_mdio: enet2mdiogrp {
|
||
|
fsl,pins = <
|
||
|
MX6UL_PAD_GPIO1_IO07__ENET2_MDC 0x1b0b0
|
||
|
MX6UL_PAD_GPIO1_IO06__ENET2_MDIO 0x1b0b0
|
||
|
>;
|
||
|
};
|
||
|
|
||
|
pinctrl_flexcan2: flexcan2grp{
|
||
|
fsl,pins = <
|
||
|
MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX 0x1b020
|
||
|
MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX 0x1b020
|
||
|
>;
|
||
|
};
|
||
|
|
||
|
pinctrl_gpio: gpiogrp {
|
||
|
fsl,pins = <
|
||
|
MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05 0x1b0b0 /* DOUT1 */
|
||
|
MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04 0x1b0b0 /* DIN1 */
|
||
|
MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x1b0b0 /* DOUT2 */
|
||
|
MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x1b0b0 /* DIN2 */
|
||
|
>;
|
||
|
};
|
||
|
|
||
|
pinctrl_gpio_leds: gpioledsgrp {
|
||
|
fsl,pins = <
|
||
|
MX6UL_PAD_UART5_TX_DATA__GPIO1_IO30 0x1b0b0 /* LED H14 */
|
||
|
MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x1b0b0 /* LED H15 */
|
||
|
MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x1b0b0 /* LED H16 */
|
||
|
>;
|
||
|
};
|
||
|
|
||
|
pinctrl_i2c1: i2c1grp {
|
||
|
fsl,pins = <
|
||
|
MX6UL_PAD_CSI_PIXCLK__I2C1_SCL 0x4001b8b0
|
||
|
MX6UL_PAD_CSI_MCLK__I2C1_SDA 0x4001b8b0
|
||
|
>;
|
||
|
};
|
||
|
|
||
|
pinctrl_i2c4: i2c4grp {
|
||
|
fsl,pins = <
|
||
|
MX6UL_PAD_UART2_TX_DATA__I2C4_SCL 0x4001f8b0
|
||
|
MX6UL_PAD_UART2_RX_DATA__I2C4_SDA 0x4001f8b0
|
||
|
>;
|
||
|
};
|
||
|
|
||
|
pinctrl_pwm8: pwm8grp {
|
||
|
fsl,pins = <
|
||
|
MX6UL_PAD_CSI_HSYNC__PWM8_OUT 0x110b0
|
||
|
>;
|
||
|
};
|
||
|
|
||
|
pinctrl_uart1: uart1grp {
|
||
|
fsl,pins = <
|
||
|
MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
|
||
|
MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1
|
||
|
>;
|
||
|
};
|
||
|
|
||
|
pinctrl_uart2: uart2grp {
|
||
|
fsl,pins = <
|
||
|
MX6UL_PAD_NAND_DATA04__UART2_DCE_TX 0x1b0b1
|
||
|
MX6UL_PAD_NAND_DATA05__UART2_DCE_RX 0x1b0b1
|
||
|
MX6UL_PAD_NAND_DATA06__UART2_DCE_CTS 0x1b0b1
|
||
|
/*
|
||
|
* mux unused RTS to make sure it doesn't cause
|
||
|
* any interrupts when it is undefined
|
||
|
*/
|
||
|
MX6UL_PAD_NAND_DATA07__UART2_DCE_RTS 0x1b0b1
|
||
|
>;
|
||
|
};
|
||
|
|
||
|
pinctrl_uart3: uart3grp {
|
||
|
fsl,pins = <
|
||
|
MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX 0x1b0b1
|
||
|
MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX 0x1b0b1
|
||
|
MX6UL_PAD_UART3_CTS_B__UART3_DCE_CTS 0x1b0b1
|
||
|
MX6UL_PAD_UART3_RTS_B__UART3_DCE_RTS 0x1b0b1
|
||
|
>;
|
||
|
};
|
||
|
|
||
|
pinctrl_uart4: uart4grp {
|
||
|
fsl,pins = <
|
||
|
MX6UL_PAD_UART4_TX_DATA__UART4_DCE_TX 0x1b0b1
|
||
|
MX6UL_PAD_UART4_RX_DATA__UART4_DCE_RX 0x1b0b1
|
||
|
>;
|
||
|
};
|
||
|
|
||
|
pinctrl_usbotg1: usbotg1 {
|
||
|
fsl,pins = <
|
||
|
MX6UL_PAD_GPIO1_IO04__GPIO1_IO04 0x1b0b0
|
||
|
>;
|
||
|
};
|
||
|
|
||
|
pinctrl_usdhc1: usdhc1grp {
|
||
|
fsl,pins = <
|
||
|
MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059
|
||
|
MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059
|
||
|
MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059
|
||
|
MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059
|
||
|
MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059
|
||
|
MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059
|
||
|
MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x100b1 /* SD1_CD */
|
||
|
>;
|
||
|
};
|
||
|
|
||
|
pinctrl_usdhc2: usdhc2grp {
|
||
|
fsl,pins = <
|
||
|
MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x10059
|
||
|
MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x17059
|
||
|
MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17059
|
||
|
MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17059
|
||
|
MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17059
|
||
|
MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059
|
||
|
>;
|
||
|
};
|
||
|
|
||
|
pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
|
||
|
fsl,pins = <
|
||
|
MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x100b9
|
||
|
MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x170b9
|
||
|
MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x170b9
|
||
|
MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x170b9
|
||
|
MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x170b9
|
||
|
MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x170b9
|
||
|
>;
|
||
|
};
|
||
|
|
||
|
pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
|
||
|
fsl,pins = <
|
||
|
MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x100f9
|
||
|
MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x170f9
|
||
|
MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x170f9
|
||
|
MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x170f9
|
||
|
MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x170f9
|
||
|
MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x170f9
|
||
|
>;
|
||
|
};
|
||
|
|
||
|
pinctrl_wdog: wdoggrp {
|
||
|
fsl,pins = <
|
||
|
MX6UL_PAD_GPIO1_IO09__WDOG1_WDOG_ANY 0x30b0
|
||
|
>;
|
||
|
};
|
||
|
};
|