u-boot/include/fwu.h

284 lines
8 KiB
C
Raw Normal View History

/* SPDX-License-Identifier: GPL-2.0-or-later */
/*
* Copyright (c) 2022, Linaro Limited
*/
#if !defined _FWU_H_
#define _FWU_H_
#include <blk.h>
#include <efi.h>
#include <mtd.h>
#include <uuid.h>
#include <linux/types.h>
struct fwu_mdata;
struct udevice;
struct fwu_mdata_gpt_blk_priv {
struct udevice *blk_dev;
};
struct fwu_mtd_image_info {
u32 start, size;
int bank_num, image_num;
char uuidbuf[UUID_STR_LEN + 1];
};
struct fwu_mdata_ops {
/**
* read_mdata() - Populate the asked FWU metadata copy
* @dev: FWU metadata device
* @mdata: Output FWU mdata read
* @primary: If primary or secondary copy of metadata is to be read
*
* Return: 0 if OK, -ve on error
*/
int (*read_mdata)(struct udevice *dev, struct fwu_mdata *mdata, bool primary);
/**
* write_mdata() - Write the given FWU metadata copy
* @dev: FWU metadata device
* @mdata: Copy of the FWU metadata to write
* @primary: If primary or secondary copy of metadata is to be written
*
* Return: 0 if OK, -ve on error
*/
int (*write_mdata)(struct udevice *dev, struct fwu_mdata *mdata, bool primary);
};
#define FWU_MDATA_VERSION 0x1
#define FWU_IMAGE_ACCEPTED 0x1
/*
* GUID value defined in the FWU specification for identification
* of the FWU metadata partition.
*/
#define FWU_MDATA_GUID \
EFI_GUID(0x8a7a84a0, 0x8387, 0x40f6, 0xab, 0x41, \
0xa8, 0xb9, 0xa5, 0xa6, 0x0d, 0x23)
/*
* GUID value defined in the Dependable Boot specification for
* identification of the revert capsule, used for reverting
* any image in the updated bank.
*/
#define FWU_OS_REQUEST_FW_REVERT_GUID \
EFI_GUID(0xacd58b4b, 0xc0e8, 0x475f, 0x99, 0xb5, \
0x6b, 0x3f, 0x7e, 0x07, 0xaa, 0xf0)
/*
* GUID value defined in the Dependable Boot specification for
* identification of the accept capsule, used for accepting
* an image in the updated bank.
*/
#define FWU_OS_REQUEST_FW_ACCEPT_GUID \
EFI_GUID(0x0c996046, 0xbcc0, 0x4d04, 0x85, 0xec, \
0xe1, 0xfc, 0xed, 0xf1, 0xc6, 0xf8)
/**
* fwu_read_mdata() - Wrapper around fwu_mdata_ops.read_mdata()
*/
int fwu_read_mdata(struct udevice *dev, struct fwu_mdata *mdata, bool primary);
/**
* fwu_write_mdata() - Wrapper around fwu_mdata_ops.write_mdata()
*/
int fwu_write_mdata(struct udevice *dev, struct fwu_mdata *mdata, bool primary);
/**
* fwu_get_mdata() - Read, verify and return the FWU metadata
*
* Read both the metadata copies from the storage media, verify their checksum,
* and ascertain that both copies match. If one of the copies has gone bad,
* restore it from the good copy.
*
* Return: 0 if OK, -ve on error
*/
int fwu_get_mdata(struct fwu_mdata *mdata);
/**
* fwu_get_active_index() - Get active_index from the FWU metadata
* @active_idxp: active_index value to be read
*
* Read the active_index field from the FWU metadata and place it in
* the variable pointed to be the function argument.
*
* Return: 0 if OK, -ve on error
*
*/
int fwu_get_active_index(uint *active_idxp);
/**
* fwu_set_active_index() - Set active_index in the FWU metadata
* @active_idx: active_index value to be set
*
* Update the active_index field in the FWU metadata
*
* Return: 0 if OK, -ve on error
*
*/
int fwu_set_active_index(uint active_idx);
/**
* fwu_get_dfu_alt_num() - Get the dfu_alt_num to be used for capsule update
* @image_index: The Image Index for the image
* @alt_num: pointer to store dfu_alt_num
*
* Currently, the capsule update driver uses the DFU framework for
* the updates. This function gets the DFU alt number which is to
* be used for capsule update.
*
* Return: 0 if OK, -ve on error
*
*/
int fwu_get_dfu_alt_num(u8 image_index, u8 *alt_num);
/**
* fwu_revert_boot_index() - Revert the active index in the FWU metadata
*
* Revert the active_index value in the FWU metadata, by swapping the values
* of active_index and previous_active_index in both copies of the
* FWU metadata.
*
* Return: 0 if OK, -ve on error
*
*/
int fwu_revert_boot_index(void);
/**
* fwu_accept_image() - Set the Acceptance bit for the image
* @img_type_id: GUID of the image type for which the accepted bit is to be
* cleared
* @bank: Bank of which the image's Accept bit is to be set
*
* Set the accepted bit for the image specified by the img_guid parameter. This
* indicates acceptance of image for subsequent boots by some governing component
* like OS(or firmware).
*
* Return: 0 if OK, -ve on error
*
*/
int fwu_accept_image(efi_guid_t *img_type_id, u32 bank);
/**
* fwu_clear_accept_image() - Clear the Acceptance bit for the image
* @img_type_id: GUID of the image type for which the accepted bit is to be
* cleared
* @bank: Bank of which the image's Accept bit is to be cleared
*
* Clear the accepted bit for the image type specified by the img_type_id parameter.
* This function is called after the image has been updated. The accepted bit is
* cleared to be set subsequently after passing the image acceptance criteria, by
* either the OS(or firmware)
*
* Return: 0 if OK, -ve on error
*
*/
int fwu_clear_accept_image(efi_guid_t *img_type_id, u32 bank);
/**
* fwu_plat_get_alt_num() - Get the DFU Alt Num for the image from the platform
* @dev: FWU device
* @image_guid: Image GUID for which DFU alt number needs to be retrieved
* @alt_num: Pointer to the alt_num
*
* Get the DFU alt number from the platform for the image specified by the
* image GUID.
*
* Return: 0 if OK, -ve on error
*
*/
int fwu_plat_get_alt_num(struct udevice *dev, efi_guid_t *image_guid,
u8 *alt_num);
/**
* fwu_plat_get_update_index() - Get the value of the update bank
* @update_idx: Bank number to which images are to be updated
*
* Get the value of the bank(partition) to which the update needs to be
* made.
*
* Note: This is a weak function and platforms can override this with
* their own implementation for selection of the update bank.
*
* Return: 0 if OK, -ve on error
*
*/
int fwu_plat_get_update_index(uint *update_idx);
/**
* fwu_plat_get_bootidx() - Get the value of the boot index
* @boot_idx: Boot index value
*
* Get the value of the bank(partition) from which the platform
* has booted. This value is passed to U-Boot from the earlier
* stage bootloader which loads and boots all the relevant
* firmware images
*
*/
void fwu_plat_get_bootidx(uint *boot_idx);
/**
* fwu_update_checks_pass() - Check if FWU update can be done
*
* Check if the FWU update can be executed. The updates are
* allowed only when the platform is not in Trial State and
* the boot time checks have passed
*
* Return: 1 if OK, 0 if checks do not pass
*
*/
u8 fwu_update_checks_pass(void);
/**
* fwu_empty_capsule_checks_pass() - Check if empty capsule can be processed
*
* Check if the empty capsule can be processed to either accept or revert
* an earlier executed update. The empty capsules need to be processed
* only when the platform is in Trial State and the boot time checks have
* passed
*
* Return: 1 if OK, 0 if not to be allowed
*
*/
u8 fwu_empty_capsule_checks_pass(void);
/**
* fwu_trial_state_ctr_start() - Start the Trial State counter
*
* Start the counter to identify the platform booting in the
* Trial State. The counter is implemented as an EFI variable.
*
* Return: 0 if OK, -ve on error
*
*/
int fwu_trial_state_ctr_start(void);
/**
* fwu_gen_alt_info_from_mtd() - Parse dfu_alt_info from metadata in mtd
* @buf: Buffer into which the dfu_alt_info is filled
* @len: Maximum characters that can be written in buf
* @mtd: Pointer to underlying MTD device
*
* Parse dfu_alt_info from metadata in mtd. Used for setting the env.
*
* Return: 0 if OK, -ve on error
*/
int fwu_gen_alt_info_from_mtd(char *buf, size_t len, struct mtd_info *mtd);
/**
* fwu_mtd_get_alt_num() - Mapping of fwu_plat_get_alt_num for MTD device
* @image_guid: Image GUID for which DFU alt number needs to be retrieved
* @alt_num: Pointer to the alt_num
* @mtd_dev: Name of mtd device instance
*
* To map fwu_plat_get_alt_num onto mtd based metadata implementation.
*
* Return: 0 if OK, -ve on error
*/
int fwu_mtd_get_alt_num(efi_guid_t *image_guid, u8 *alt_num, const char *mtd_dev);
#endif /* _FWU_H_ */