Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-26 21:13:48 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/arch/arm/mach-omap2/am33xx/Kconfig

264 lines
5.7 KiB
Text
Raw Normal View History

t81xx: Migrate TI81XX/TI816X/TI814X symbols to Kconfig The symbol CONFIG_TI81XX is used for the parts that are common to the TI816x and TI814x SoCs and are not part of CONFIG_ARCH_OMAP2PLUS nor CONFIG_AM33XX. It however has so few uses that we can just modify the code to check for both and drop the symbol. The symbols CONFIG_TI816X and CONFIG_TI814X are for the repective SoCs. Signed-off-by: Tom Rini <trini@konsulko.com>
2017-05-16 18:46:40 +00:00
if TI816X
config TARGET_TI816X_EVM
bool "Support ti816x_evm"
help
This option specifies support for the TI8168 EVM development platform
with PG2.0 silicon and DDR3 DRAM.
endif
if TI814X
config TARGET_TI814X_EVM
bool "Support ti814x_evm"
help
This option specifies support for the TI8148
EVM development platform.
endif
Kconfig: Separate AM33XX SOC config from target board config The config option AM33XX is used in several boards and should be defined as a stand-alone option for this SOC. We break this out from target boards that use this SoC and common headers then enable AM33XX on in all the boards that used these targets to eliminate any functional change with this patch. This is similar to what has already been done in 9de852642cae ("arm: Kconfig: Add support for AM43xx SoC specific Kconfig") and is done for the same reasons. Signed-off-by: Andrew F. Davis <afd@ti.com> Acked-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-08-30 19:06:20 +00:00
if AM33XX
ARM: am335x: Add support for chiliSOM chiliSOM is a System On Module (http://http://grinn-global.com/chilisom/). It can't exists on its own, but will be used as part of other boards. Hardware specification: * TI AM335x processor * 128M, 256M or 512M DDR3 memory * up to 256M NAND We place source inside arch/arm/mach-omap2/ directory and make it possible to reuse initialization code (i.e. DDR, NAND init) for all boards that use it. Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-01-25 08:53:07 +00:00
config AM33XX_CHILISOM
bool
select SUPPORT_SPL
Kconfig: Separate AM33XX SOC config from target board config The config option AM33XX is used in several boards and should be defined as a stand-alone option for this SOC. We break this out from target boards that use this SoC and common headers then enable AM33XX on in all the boards that used these targets to eliminate any functional change with this patch. This is similar to what has already been done in 9de852642cae ("arm: Kconfig: Add support for AM43xx SoC specific Kconfig") and is done for the same reasons. Signed-off-by: Andrew F. Davis <afd@ti.com> Acked-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-08-30 19:06:20 +00:00
choice
prompt "AM33xx board select"
config TARGET_AM335X_EVM
bool "Support am335x_evm"
Kconfig: Migrate BOARD_LATE_INIT to a select This option should not really be user selectable. Note that on PowerPC we currently only need BOARD_LATE_INIT when CHAIN_OF_TRUST is enabled so be conditional on that. Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> (for UniPhier)
2017-01-23 00:43:11 +00:00
select BOARD_LATE_INIT
Kconfig: Separate AM33XX SOC config from target board config The config option AM33XX is used in several boards and should be defined as a stand-alone option for this SOC. We break this out from target boards that use this SoC and common headers then enable AM33XX on in all the boards that used these targets to eliminate any functional change with this patch. This is similar to what has already been done in 9de852642cae ("arm: Kconfig: Add support for AM43xx SoC specific Kconfig") and is done for the same reasons. Signed-off-by: Andrew F. Davis <afd@ti.com> Acked-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-08-30 19:06:20 +00:00
select DM
select DM_SERIAL
select DM_GPIO
select TI_I2C_BOARD_DETECT
am335x_evm: Switch to using imply keyword These particular SPL options are part of what the ROM provides, but for compatibility with how we have previously used them, move them to being implied by the board being selected. Signed-off-by: Tom Rini <trini@konsulko.com>
2017-03-03 20:33:30 +00:00
imply SPL_ENV_SUPPORT
TI: Migrate board/ti/common/Kconfig to imply The option that we had set in board/ti/common/Kconfig as default y are best done with imply under the appropriate main Kconfig option instead. Signed-off-by: Tom Rini <trini@konsulko.com>
2017-03-03 20:33:31 +00:00
imply SPL_EXT_SUPPORT
imply SPL_FAT_SUPPORT
imply SPL_GPIO_SUPPORT
imply SPL_I2C_SUPPORT
imply SPL_LIBCOMMON_SUPPORT
imply SPL_LIBDISK_SUPPORT
imply SPL_LIBGENERIC_SUPPORT
imply SPL_MMC_SUPPORT
imply SPL_NAND_SUPPORT
imply SPL_POWER_SUPPORT
imply SPL_SERIAL_SUPPORT
am335x_evm: Switch to using imply keyword These particular SPL options are part of what the ROM provides, but for compatibility with how we have previously used them, move them to being implied by the board being selected. Signed-off-by: Tom Rini <trini@konsulko.com>
2017-03-03 20:33:30 +00:00
imply SPL_WATCHDOG_SUPPORT
TI: Migrate board/ti/common/Kconfig to imply The option that we had set in board/ti/common/Kconfig as default y are best done with imply under the appropriate main Kconfig option instead. Signed-off-by: Tom Rini <trini@konsulko.com>
2017-03-03 20:33:31 +00:00
imply SPL_YMODEM_SUPPORT
configs: am335x_evm: Enable SPL_DM Enable SPL_DM on all AM335x based TI platforms. http://patchwork.ozlabs.org/patch/751300/ Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2017-04-26 08:07:09 +00:00
imply SPL_SYS_MALLOC_SIMPLE
imply SPL_SEPARATE_BSS
imply SPL_DM
imply SPL_DM_SEQ_ALIAS
imply SPL_OF_LIBFDT
Kconfig: Separate AM33XX SOC config from target board config The config option AM33XX is used in several boards and should be defined as a stand-alone option for this SOC. We break this out from target boards that use this SoC and common headers then enable AM33XX on in all the boards that used these targets to eliminate any functional change with this patch. This is similar to what has already been done in 9de852642cae ("arm: Kconfig: Add support for AM43xx SoC specific Kconfig") and is done for the same reasons. Signed-off-by: Andrew F. Davis <afd@ti.com> Acked-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-08-30 19:06:20 +00:00
help
This option specifies support for the AM335x
GP and HS EVM development platforms. The AM335x
GP EVM is a standalone test, development, and
evaluation module system that enables developers
to write software and develop hardware around
an AM335x processor subsystem.
config TARGET_AM335X_BALTOS
bool "Support am335x_baltos"
Kconfig: Migrate BOARD_LATE_INIT to a select This option should not really be user selectable. Note that on PowerPC we currently only need BOARD_LATE_INIT when CHAIN_OF_TRUST is enabled so be conditional on that. Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> (for UniPhier)
2017-01-23 00:43:11 +00:00
select BOARD_LATE_INIT
Kconfig: Separate AM33XX SOC config from target board config The config option AM33XX is used in several boards and should be defined as a stand-alone option for this SOC. We break this out from target boards that use this SoC and common headers then enable AM33XX on in all the boards that used these targets to eliminate any functional change with this patch. This is similar to what has already been done in 9de852642cae ("arm: Kconfig: Add support for AM43xx SoC specific Kconfig") and is done for the same reasons. Signed-off-by: Andrew F. Davis <afd@ti.com> Acked-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-08-30 19:06:20 +00:00
select DM
select DM_SERIAL
select DM_GPIO
igep0033: Rename to igep003x Rename igep0033 to igep003x as IGEP SMARC AM335x module (igep0034) can use the same source files. Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Tested-by: Pau Pajuelo <ppajuel@gmail.com>
2017-04-01 15:17:16 +00:00
config TARGET_AM335X_IGEP003X
bool "Support am335x_igep003x"
igep003x: Add support for IGEP SMARC AM335x The IGEP SMARC AM335x is an industrial processor module with following highlights: o AM3352 TI processor (Up to AM3359) o Cortex-A8 ARM CPU o SMARC form factor module o Up to 512 MB DDR3 SDRAM / 512 MB FLASH o WiFi a/b/g/n and Bluetooth v4.0 on-board o Ethernet 10/100/1000 Mbps and 10/100 Mbps controller on-board o JTAG debug connector available o Designed for industrial range purposes Signed-off-by: Pau Pajuelo <ppajuelo@iseebcn.com> Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Tested-by: Pau Pajuelo <ppajuel@gmail.com>
2017-04-01 15:18:40 +00:00
select BOARD_LATE_INIT
Kconfig: Separate AM33XX SOC config from target board config The config option AM33XX is used in several boards and should be defined as a stand-alone option for this SOC. We break this out from target boards that use this SoC and common headers then enable AM33XX on in all the boards that used these targets to eliminate any functional change with this patch. This is similar to what has already been done in 9de852642cae ("arm: Kconfig: Add support for AM43xx SoC specific Kconfig") and is done for the same reasons. Signed-off-by: Andrew F. Davis <afd@ti.com> Acked-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-08-30 19:06:20 +00:00
select DM
select DM_SERIAL
select DM_GPIO
config TARGET_AM335X_SHC
bool "Support am335x based shc board from bosch"
Kconfig: Migrate BOARD_LATE_INIT to a select This option should not really be user selectable. Note that on PowerPC we currently only need BOARD_LATE_INIT when CHAIN_OF_TRUST is enabled so be conditional on that. Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> (for UniPhier)
2017-01-23 00:43:11 +00:00
select BOARD_LATE_INIT
Kconfig: Separate AM33XX SOC config from target board config The config option AM33XX is used in several boards and should be defined as a stand-alone option for this SOC. We break this out from target boards that use this SoC and common headers then enable AM33XX on in all the boards that used these targets to eliminate any functional change with this patch. This is similar to what has already been done in 9de852642cae ("arm: Kconfig: Add support for AM43xx SoC specific Kconfig") and is done for the same reasons. Signed-off-by: Andrew F. Davis <afd@ti.com> Acked-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-08-30 19:06:20 +00:00
select DM
select DM_SERIAL
select DM_GPIO
config TARGET_AM335X_SL50
bool "Support am335x_sl50"
Kconfig: Migrate BOARD_LATE_INIT to a select This option should not really be user selectable. Note that on PowerPC we currently only need BOARD_LATE_INIT when CHAIN_OF_TRUST is enabled so be conditional on that. Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> (for UniPhier)
2017-01-23 00:43:11 +00:00
select BOARD_LATE_INIT
Kconfig: Separate AM33XX SOC config from target board config The config option AM33XX is used in several boards and should be defined as a stand-alone option for this SOC. We break this out from target boards that use this SoC and common headers then enable AM33XX on in all the boards that used these targets to eliminate any functional change with this patch. This is similar to what has already been done in 9de852642cae ("arm: Kconfig: Add support for AM43xx SoC specific Kconfig") and is done for the same reasons. Signed-off-by: Andrew F. Davis <afd@ti.com> Acked-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-08-30 19:06:20 +00:00
select DM
select DM_SERIAL
select DM_GPIO
config TARGET_BAV335X
bool "Support bav335x"
Kconfig: Migrate BOARD_LATE_INIT to a select This option should not really be user selectable. Note that on PowerPC we currently only need BOARD_LATE_INIT when CHAIN_OF_TRUST is enabled so be conditional on that. Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> (for UniPhier)
2017-01-23 00:43:11 +00:00
select BOARD_LATE_INIT
Kconfig: Separate AM33XX SOC config from target board config The config option AM33XX is used in several boards and should be defined as a stand-alone option for this SOC. We break this out from target boards that use this SoC and common headers then enable AM33XX on in all the boards that used these targets to eliminate any functional change with this patch. This is similar to what has already been done in 9de852642cae ("arm: Kconfig: Add support for AM43xx SoC specific Kconfig") and is done for the same reasons. Signed-off-by: Andrew F. Davis <afd@ti.com> Acked-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-08-30 19:06:20 +00:00
select DM
select DM_SERIAL
help
The BAV335x OEM Network Processor integrates all the functions of an
embedded network computer in a small, easy to use SODIMM module which
incorporates the popular Texas Instruments Sitara 32bit ARM Coretex-A8
processor, with fast DDR3 512MB SDRAM, 4GB of embedded MMC and a Gigabit
ethernet with simple connection to external connectors.
For more information, visit: http://birdland.com/oem
am33xx: Finish migration of CONFIG_AM33XX/AM43XX Almost all users of CONFIG_AM33XX/AM43XX have been migrated. Finish moving the last few over to Kconfig, and put all of the boards under the appropriate Kconfig chocie now. This board choice is non-optional, so remove that keyword on am33xx. Signed-off-by: Tom Rini <trini@konsulko.com>
2017-06-09 20:59:17 +00:00
config TARGET_BRXRE1
bool "Support BRXRE1"
select BOARD_LATE_INIT
config TARGET_BRPPT1
bool "Support BRPPT1"
select BOARD_LATE_INIT
board/chiliboard: Add support for chiliBoard chiliBoard is a development board which uses chiliSOM as its base. Hardware specification: * chiliSOM (TI AM335x, DRAM, NAND) * Ethernet PHY (id 0) * USB host (usb1) * MicroSD slot (mmc0) Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-01-25 08:53:08 +00:00
config TARGET_CHILIBOARD
bool "Grinn chiliBoard"
select AM33XX_CHILISOM
select BOARD_LATE_INIT
select DM
select DM_SERIAL
Kconfig: Separate AM33XX SOC config from target board config The config option AM33XX is used in several boards and should be defined as a stand-alone option for this SOC. We break this out from target boards that use this SoC and common headers then enable AM33XX on in all the boards that used these targets to eliminate any functional change with this patch. This is similar to what has already been done in 9de852642cae ("arm: Kconfig: Add support for AM43xx SoC specific Kconfig") and is done for the same reasons. Signed-off-by: Andrew F. Davis <afd@ti.com> Acked-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-08-30 19:06:20 +00:00
config TARGET_CM_T335
bool "Support cm_t335"
select DM
select DM_SERIAL
select DM_GPIO
am33xx: Finish migration of CONFIG_AM33XX/AM43XX Almost all users of CONFIG_AM33XX/AM43XX have been migrated. Finish moving the last few over to Kconfig, and put all of the boards under the appropriate Kconfig chocie now. This board choice is non-optional, so remove that keyword on am33xx. Signed-off-by: Tom Rini <trini@konsulko.com>
2017-06-09 20:59:17 +00:00
config TARGET_DRACO
bool "Support draco"
select BOARD_LATE_INIT
select DM
select DM_SERIAL
select DM_GPIO
config TARGET_ETAMIN
bool "Support etamin"
select BOARD_LATE_INIT
select DM
select DM_SERIAL
select DM_GPIO
Kconfig: Separate AM33XX SOC config from target board config The config option AM33XX is used in several boards and should be defined as a stand-alone option for this SOC. We break this out from target boards that use this SoC and common headers then enable AM33XX on in all the boards that used these targets to eliminate any functional change with this patch. This is similar to what has already been done in 9de852642cae ("arm: Kconfig: Add support for AM43xx SoC specific Kconfig") and is done for the same reasons. Signed-off-by: Andrew F. Davis <afd@ti.com> Acked-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-08-30 19:06:20 +00:00
config TARGET_PCM051
bool "Support pcm051"
select DM
select DM_SERIAL
select DM_GPIO
config TARGET_PENGWYN
bool "Support pengwyn"
select DM
select DM_SERIAL
select DM_GPIO
config TARGET_PEPPER
bool "Support pepper"
select DM
select DM_SERIAL
select DM_GPIO
am33xx: Finish migration of CONFIG_AM33XX/AM43XX Almost all users of CONFIG_AM33XX/AM43XX have been migrated. Finish moving the last few over to Kconfig, and put all of the boards under the appropriate Kconfig chocie now. This board choice is non-optional, so remove that keyword on am33xx. Signed-off-by: Tom Rini <trini@konsulko.com>
2017-06-09 20:59:17 +00:00
config TARGET_PXM2
bool "Support pxm2"
select BOARD_LATE_INIT
select DM
select DM_SERIAL
select DM_GPIO
config TARGET_RASTABAN
bool "Support rastaban"
select BOARD_LATE_INIT
select DM
select DM_SERIAL
select DM_GPIO
config TARGET_RUT
bool "Support rut"
select BOARD_LATE_INIT
select DM
select DM_SERIAL
select DM_GPIO
config TARGET_THUBAN
bool "Support thuban"
select BOARD_LATE_INIT
select DM
select DM_SERIAL
select DM_GPIO
Kconfig: Separate AM33XX SOC config from target board config The config option AM33XX is used in several boards and should be defined as a stand-alone option for this SOC. We break this out from target boards that use this SoC and common headers then enable AM33XX on in all the boards that used these targets to eliminate any functional change with this patch. This is similar to what has already been done in 9de852642cae ("arm: Kconfig: Add support for AM43xx SoC specific Kconfig") and is done for the same reasons. Signed-off-by: Andrew F. Davis <afd@ti.com> Acked-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-08-30 19:06:20 +00:00
endchoice
endif
arm: Kconfig: Add support for AM43xx SoC specific Kconfig Adding support for AM43xx secure devices require the addition of some SOC specific config options like the amount of memory used by public ROM and the address of the entry point of u-boot or SPL, as seen by the ROM code, for the image to be built correctly. This mandates the addition of am AM43xx CONFIG option and the ARM Kconfig file has been modified to source this SOC Kconfig file. Moving the TARGET_AM43XX_EVM config option to the SOC KConfig and out of the arch/arm/Kconfig. Updating defconfigs to add the CONFIG_AM43XX=y statement and removing the #define CONFIG_AM43XX from the header file. Signed-off-by: Madan Srinivas <madans@ti.com> Signed-off-by: Daniel Allred <d-allred@ti.com> Tested-by: Andreas Dannenberg <dannenberg@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-05-20 00:10:43 +00:00
if AM43XX
Convert CONFIG_SPL_EXT_SUPPORT to Kconfig Move this option to Kconfig and tidy up existing uses. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-13 05:18:37 +00:00
am33xx: Finish migration of CONFIG_AM33XX/AM43XX Almost all users of CONFIG_AM33XX/AM43XX have been migrated. Finish moving the last few over to Kconfig, and put all of the boards under the appropriate Kconfig chocie now. This board choice is non-optional, so remove that keyword on am33xx. Signed-off-by: Tom Rini <trini@konsulko.com>
2017-06-09 20:59:17 +00:00
choice
prompt "AM43xx board select"
arm: Kconfig: Add support for AM43xx SoC specific Kconfig Adding support for AM43xx secure devices require the addition of some SOC specific config options like the amount of memory used by public ROM and the address of the entry point of u-boot or SPL, as seen by the ROM code, for the image to be built correctly. This mandates the addition of am AM43xx CONFIG option and the ARM Kconfig file has been modified to source this SOC Kconfig file. Moving the TARGET_AM43XX_EVM config option to the SOC KConfig and out of the arch/arm/Kconfig. Updating defconfigs to add the CONFIG_AM43XX=y statement and removing the #define CONFIG_AM43XX from the header file. Signed-off-by: Madan Srinivas <madans@ti.com> Signed-off-by: Daniel Allred <d-allred@ti.com> Tested-by: Andreas Dannenberg <dannenberg@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-05-20 00:10:43 +00:00
config TARGET_AM43XX_EVM
bool "Support am43xx_evm"
Kconfig: Migrate BOARD_LATE_INIT to a select This option should not really be user selectable. Note that on PowerPC we currently only need BOARD_LATE_INIT when CHAIN_OF_TRUST is enabled so be conditional on that. Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> (for UniPhier)
2017-01-23 00:43:11 +00:00
select BOARD_LATE_INIT
arm: Kconfig: Add support for AM43xx SoC specific Kconfig Adding support for AM43xx secure devices require the addition of some SOC specific config options like the amount of memory used by public ROM and the address of the entry point of u-boot or SPL, as seen by the ROM code, for the image to be built correctly. This mandates the addition of am AM43xx CONFIG option and the ARM Kconfig file has been modified to source this SOC Kconfig file. Moving the TARGET_AM43XX_EVM config option to the SOC KConfig and out of the arch/arm/Kconfig. Updating defconfigs to add the CONFIG_AM43XX=y statement and removing the #define CONFIG_AM43XX from the header file. Signed-off-by: Madan Srinivas <madans@ti.com> Signed-off-by: Daniel Allred <d-allred@ti.com> Tested-by: Andreas Dannenberg <dannenberg@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-05-20 00:10:43 +00:00
select TI_I2C_BOARD_DETECT
ARM: AM43xx: Enable DM_I2C/SPI/ETH Enable DM_I2C/SPI/ETH for all AM43XX based boards. Enable it using imply keyword so that a user can disable this when not needed. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2017-02-21 06:10:43 +00:00
imply DM_ETH
imply DM_I2C
imply DM_SPI
imply DM_SPI_FLASH
imply SPI_FLASH_BAR
TI: Migrate board/ti/common/Kconfig to imply The option that we had set in board/ti/common/Kconfig as default y are best done with imply under the appropriate main Kconfig option instead. Signed-off-by: Tom Rini <trini@konsulko.com>
2017-03-03 20:33:31 +00:00
imply SPL_ENV_SUPPORT
imply SPL_EXT_SUPPORT
imply SPL_FAT_SUPPORT
imply SPL_GPIO_SUPPORT
imply SPL_I2C_SUPPORT
imply SPL_LIBCOMMON_SUPPORT
imply SPL_LIBDISK_SUPPORT
imply SPL_LIBGENERIC_SUPPORT
imply SPL_MMC_SUPPORT
imply SPL_NAND_SUPPORT
imply SPL_POWER_SUPPORT
imply SPL_SERIAL_SUPPORT
imply SPL_WATCHDOG_SUPPORT
imply SPL_YMODEM_SUPPORT
arm: Kconfig: Add support for AM43xx SoC specific Kconfig Adding support for AM43xx secure devices require the addition of some SOC specific config options like the amount of memory used by public ROM and the address of the entry point of u-boot or SPL, as seen by the ROM code, for the image to be built correctly. This mandates the addition of am AM43xx CONFIG option and the ARM Kconfig file has been modified to source this SOC Kconfig file. Moving the TARGET_AM43XX_EVM config option to the SOC KConfig and out of the arch/arm/Kconfig. Updating defconfigs to add the CONFIG_AM43XX=y statement and removing the #define CONFIG_AM43XX from the header file. Signed-off-by: Madan Srinivas <madans@ti.com> Signed-off-by: Daniel Allred <d-allred@ti.com> Tested-by: Andreas Dannenberg <dannenberg@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-05-20 00:10:43 +00:00
help
This option specifies support for the AM43xx
GP and HS EVM development platforms.The AM437x
GP EVM is a standalone test, development, and
evaluation module system that enables developers
to write software and develop hardware around
an AM43xx processor subsystem.
am33xx: Finish migration of CONFIG_AM33XX/AM43XX Almost all users of CONFIG_AM33XX/AM43XX have been migrated. Finish moving the last few over to Kconfig, and put all of the boards under the appropriate Kconfig chocie now. This board choice is non-optional, so remove that keyword on am33xx. Signed-off-by: Tom Rini <trini@konsulko.com>
2017-06-09 20:59:17 +00:00
config TARGET_CM_T43
bool "Support cm_t43"
endchoice
Kconfig: Separate AM33XX SOC config from target board config The config option AM33XX is used in several boards and should be defined as a stand-alone option for this SOC. We break this out from target boards that use this SoC and common headers then enable AM33XX on in all the boards that used these targets to eliminate any functional change with this patch. This is similar to what has already been done in 9de852642cae ("arm: Kconfig: Add support for AM43xx SoC specific Kconfig") and is done for the same reasons. Signed-off-by: Andrew F. Davis <afd@ti.com> Acked-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-08-30 19:06:20 +00:00
endif
arm: Kconfig: Add support for AM43xx SoC specific Kconfig Adding support for AM43xx secure devices require the addition of some SOC specific config options like the amount of memory used by public ROM and the address of the entry point of u-boot or SPL, as seen by the ROM code, for the image to be built correctly. This mandates the addition of am AM43xx CONFIG option and the ARM Kconfig file has been modified to source this SOC Kconfig file. Moving the TARGET_AM43XX_EVM config option to the SOC KConfig and out of the arch/arm/Kconfig. Updating defconfigs to add the CONFIG_AM43XX=y statement and removing the #define CONFIG_AM43XX from the header file. Signed-off-by: Madan Srinivas <madans@ti.com> Signed-off-by: Daniel Allred <d-allred@ti.com> Tested-by: Andreas Dannenberg <dannenberg@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-05-20 00:10:43 +00:00
Kconfig: Separate AM33XX SOC config from target board config The config option AM33XX is used in several boards and should be defined as a stand-alone option for this SOC. We break this out from target boards that use this SoC and common headers then enable AM33XX on in all the boards that used these targets to eliminate any functional change with this patch. This is similar to what has already been done in 9de852642cae ("arm: Kconfig: Add support for AM43xx SoC specific Kconfig") and is done for the same reasons. Signed-off-by: Andrew F. Davis <afd@ti.com> Acked-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-08-30 19:06:20 +00:00
if AM43XX || AM33XX
arm: am33xx: Kconfig: Add secure device definitions Adds a new Kconfig file for AM33xx class devices. We need a common place to define CONFIG parameters for these SOCs, especially for adding support for secure devices. a) Adds a definition for ISW_ENTRY_ADDR. This is the address to which the ROM branches when the SOC ROM hands off execution to the boot loader. CONFIG_SYS_TEXT_BASE and CONFIG_SPL_TEXT_BASE are set to this value for AM43xx devices. b) Adds CONFIG_PUB_ROM_DATA_SIZE which is used to calculate CONFIG_SPL_MAX_SIZE. This value indicates the amount of memory needed by the ROM to store data during the boot process. Currently, these CONFIG options are used only by AM43xx, but in future other AM33xx class SOCs will also use them. Signed-off-by: Madan Srinivas <madans@ti.com> Signed-off-by: Daniel Allred <d-allred@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Tested-by: Andreas Dannenberg <dannenberg@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-05-20 00:10:42 +00:00
config ISW_ENTRY_ADDR
hex "Address in memory or XIP flash of bootloader entry point"
help
After any reset, the boot ROM on the AM43XX SOC
searches the boot media for a valid boot image.
For non-XIP devices, the ROM then copies the
image into internal memory.
For all boot modes, after the ROM processes the
boot image it eventually computes the entry
point address depending on the device type
(secure/non-secure), boot media (xip/non-xip) and
image headers.
am335x: configs: Use ISW_ENTRY_ADDR to set SPL_TEXT_BASE The SPL load address changes based on boot type in HS devices, ISW_ENTRY_ADDR is used to set this address for AM43xx based SoCs for similar reasons. Add this same logic for AM33xx devices. Also make the default value for ISW_ENTRY_ADDR correct for GP devices based on SoC, HS devices already pick the correct value in their defconfig. Signed-off-by: Andrew F. Davis <afd@ti.com>
2017-01-06 22:32:12 +00:00
default 0x402F4000 if AM43XX
default 0x402F0400 if AM33XX
arm: am33xx: Kconfig: Add secure device definitions Adds a new Kconfig file for AM33xx class devices. We need a common place to define CONFIG parameters for these SOCs, especially for adding support for secure devices. a) Adds a definition for ISW_ENTRY_ADDR. This is the address to which the ROM branches when the SOC ROM hands off execution to the boot loader. CONFIG_SYS_TEXT_BASE and CONFIG_SPL_TEXT_BASE are set to this value for AM43xx devices. b) Adds CONFIG_PUB_ROM_DATA_SIZE which is used to calculate CONFIG_SPL_MAX_SIZE. This value indicates the amount of memory needed by the ROM to store data during the boot process. Currently, these CONFIG options are used only by AM43xx, but in future other AM33xx class SOCs will also use them. Signed-off-by: Madan Srinivas <madans@ti.com> Signed-off-by: Daniel Allred <d-allred@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Tested-by: Andreas Dannenberg <dannenberg@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-05-20 00:10:42 +00:00
config PUB_ROM_DATA_SIZE
hex "Size in bytes of the L3 SRAM reserved by ROM to store data"
help
During the device boot, the public ROM uses the top of
the public L3 OCMC RAM to store r/w data like stack,
heap, globals etc. When the ROM is copying the boot
image from the boot media into memory, the image must
not spill over into this area. This value can be used
during compile time to determine the maximum size of a
boot image. Once the ROM transfers control to the boot
image, this area is no longer used, and can be reclaimed
for run time use by the boot image.
default 0x8400
arm: Kconfig: Add support for AM43xx SoC specific Kconfig Adding support for AM43xx secure devices require the addition of some SOC specific config options like the amount of memory used by public ROM and the address of the entry point of u-boot or SPL, as seen by the ROM code, for the image to be built correctly. This mandates the addition of am AM43xx CONFIG option and the ARM Kconfig file has been modified to source this SOC Kconfig file. Moving the TARGET_AM43XX_EVM config option to the SOC KConfig and out of the arch/arm/Kconfig. Updating defconfigs to add the CONFIG_AM43XX=y statement and removing the #define CONFIG_AM43XX from the header file. Signed-off-by: Madan Srinivas <madans@ti.com> Signed-off-by: Daniel Allred <d-allred@ti.com> Tested-by: Andreas Dannenberg <dannenberg@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-05-20 00:10:43 +00:00
endif
Reference in a new issue Copy permalink