u-boot/board/xilinx/common/xstatus.h

348 lines
16 KiB
C
Raw Normal View History

/******************************************************************************
*
* Author: Xilinx, Inc.
*
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*
* XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
* COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
* ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
* XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
* FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
* ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
* XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
* THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
* WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
* CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
* FITNESS FOR A PARTICULAR PURPOSE.
*
*
* Xilinx hardware products are not intended for use in life support
* appliances, devices, or systems. Use in such applications is
* expressly prohibited.
*
*
* (c) Copyright 2002-2004 Xilinx Inc.
* All rights reserved.
*
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*
******************************************************************************/
/*****************************************************************************/
/**
*
* @file xstatus.h
*
* This file contains Xilinx software status codes. Status codes have their
* own data type called XStatus. These codes are used throughout the Xilinx
* device drivers.
*
******************************************************************************/
#ifndef XSTATUS_H /* prevent circular inclusions */
#define XSTATUS_H /* by using protection macros */
/***************************** Include Files *********************************/
#include "xbasic_types.h"
/************************** Constant Definitions *****************************/
/*********************** Common statuses 0 - 500 *****************************/
#define XST_SUCCESS 0L
#define XST_FAILURE 1L
#define XST_DEVICE_NOT_FOUND 2L
#define XST_DEVICE_BLOCK_NOT_FOUND 3L
#define XST_INVALID_VERSION 4L
#define XST_DEVICE_IS_STARTED 5L
#define XST_DEVICE_IS_STOPPED 6L
#define XST_FIFO_ERROR 7L /* an error occurred during an
operation with a FIFO such as
an underrun or overrun, this
error requires the device to
be reset */
#define XST_RESET_ERROR 8L /* an error occurred which requires
the device to be reset */
#define XST_DMA_ERROR 9L /* a DMA error occurred, this error
typically requires the device
using the DMA to be reset */
#define XST_NOT_POLLED 10L /* the device is not configured for
polled mode operation */
#define XST_FIFO_NO_ROOM 11L /* a FIFO did not have room to put
the specified data into */
#define XST_BUFFER_TOO_SMALL 12L /* the buffer is not large enough
to hold the expected data */
#define XST_NO_DATA 13L /* there was no data available */
#define XST_REGISTER_ERROR 14L /* a register did not contain the
expected value */
#define XST_INVALID_PARAM 15L /* an invalid parameter was passed
into the function */
#define XST_NOT_SGDMA 16L /* the device is not configured for
scatter-gather DMA operation */
#define XST_LOOPBACK_ERROR 17L /* a loopback test failed */
#define XST_NO_CALLBACK 18L /* a callback has not yet been
* registered */
#define XST_NO_FEATURE 19L /* device is not configured with
* the requested feature */
#define XST_NOT_INTERRUPT 20L /* device is not configured for
* interrupt mode operation */
#define XST_DEVICE_BUSY 21L /* device is busy */
#define XST_ERROR_COUNT_MAX 22L /* the error counters of a device
* have maxed out */
#define XST_IS_STARTED 23L /* used when part of device is
* already started i.e.
* sub channel */
#define XST_IS_STOPPED 24L /* used when part of device is
* already stopped i.e.
* sub channel */
/***************** Utility Component statuses 401 - 500 *********************/
#define XST_MEMTEST_FAILED 401L /* memory test failed */
/***************** Common Components statuses 501 - 1000 *********************/
/********************* Packet Fifo statuses 501 - 510 ************************/
#define XST_PFIFO_LACK_OF_DATA 501L /* not enough data in FIFO */
#define XST_PFIFO_NO_ROOM 502L /* not enough room in FIFO */
#define XST_PFIFO_BAD_REG_VALUE 503L /* self test, a register value
was invalid after reset */
/************************** DMA statuses 511 - 530 ***************************/
#define XST_DMA_TRANSFER_ERROR 511L /* self test, DMA transfer
failed */
#define XST_DMA_RESET_REGISTER_ERROR 512L /* self test, a register value
was invalid after reset */
#define XST_DMA_SG_LIST_EMPTY 513L /* scatter gather list contains
no buffer descriptors ready
to be processed */
#define XST_DMA_SG_IS_STARTED 514L /* scatter gather not stopped */
#define XST_DMA_SG_IS_STOPPED 515L /* scatter gather not running */
#define XST_DMA_SG_LIST_FULL 517L /* all the buffer desciptors of
the scatter gather list are
being used */
#define XST_DMA_SG_BD_LOCKED 518L /* the scatter gather buffer
descriptor which is to be
copied over in the scatter
list is locked */
#define XST_DMA_SG_NOTHING_TO_COMMIT 519L /* no buffer descriptors have been
put into the scatter gather
list to be commited */
#define XST_DMA_SG_COUNT_EXCEEDED 521L /* the packet count threshold
specified was larger than the
total # of buffer descriptors
in the scatter gather list */
#define XST_DMA_SG_LIST_EXISTS 522L /* the scatter gather list has
already been created */
#define XST_DMA_SG_NO_LIST 523L /* no scatter gather list has
been created */
#define XST_DMA_SG_BD_NOT_COMMITTED 524L /* the buffer descriptor which was
being started was not committed
to the list */
#define XST_DMA_SG_NO_DATA 525L /* the buffer descriptor to start
has already been used by the
hardware so it can't be reused
*/
/************************** IPIF statuses 531 - 550 ***************************/
#define XST_IPIF_REG_WIDTH_ERROR 531L /* an invalid register width
was passed into the function */
#define XST_IPIF_RESET_REGISTER_ERROR 532L /* the value of a register at
reset was not valid */
#define XST_IPIF_DEVICE_STATUS_ERROR 533L /* a write to the device interrupt
status register did not read
back correctly */
#define XST_IPIF_DEVICE_ACK_ERROR 534L /* the device interrupt status
register did not reset when
acked */
#define XST_IPIF_DEVICE_ENABLE_ERROR 535L /* the device interrupt enable
register was not updated when
other registers changed */
#define XST_IPIF_IP_STATUS_ERROR 536L /* a write to the IP interrupt
status register did not read
back correctly */
#define XST_IPIF_IP_ACK_ERROR 537L /* the IP interrupt status register
did not reset when acked */
#define XST_IPIF_IP_ENABLE_ERROR 538L /* IP interrupt enable register was
not updated correctly when other
registers changed */
#define XST_IPIF_DEVICE_PENDING_ERROR 539L /* The device interrupt pending
register did not indicate the
expected value */
#define XST_IPIF_DEVICE_ID_ERROR 540L /* The device interrupt ID register
did not indicate the expected
value */
/****************** Device specific statuses 1001 - 4095 *********************/
/********************* Ethernet statuses 1001 - 1050 *************************/
#define XST_EMAC_MEMORY_SIZE_ERROR 1001L /* Memory space is not big enough
* to hold the minimum number of
* buffers or descriptors */
#define XST_EMAC_MEMORY_ALLOC_ERROR 1002L /* Memory allocation failed */
#define XST_EMAC_MII_READ_ERROR 1003L /* MII read error */
#define XST_EMAC_MII_BUSY 1004L /* An MII operation is in progress */
#define XST_EMAC_OUT_OF_BUFFERS 1005L /* Adapter is out of buffers */
#define XST_EMAC_PARSE_ERROR 1006L /* Invalid adapter init string */
#define XST_EMAC_COLLISION_ERROR 1007L /* Excess deferral or late
* collision on polled send */
/*********************** UART statuses 1051 - 1075 ***************************/
#define XST_UART
#define XST_UART_INIT_ERROR 1051L
#define XST_UART_START_ERROR 1052L
#define XST_UART_CONFIG_ERROR 1053L
#define XST_UART_TEST_FAIL 1054L
#define XST_UART_BAUD_ERROR 1055L
#define XST_UART_BAUD_RANGE 1056L
/************************ IIC statuses 1076 - 1100 ***************************/
#define XST_IIC_SELFTEST_FAILED 1076 /* self test failed */
#define XST_IIC_BUS_BUSY 1077 /* bus found busy */
#define XST_IIC_GENERAL_CALL_ADDRESS 1078 /* mastersend attempted with */
/* general call address */
#define XST_IIC_STAND_REG_RESET_ERROR 1079 /* A non parameterizable reg */
/* value after reset not valid */
#define XST_IIC_TX_FIFO_REG_RESET_ERROR 1080 /* Tx fifo included in design */
/* value after reset not valid */
#define XST_IIC_RX_FIFO_REG_RESET_ERROR 1081 /* Rx fifo included in design */
/* value after reset not valid */
#define XST_IIC_TBA_REG_RESET_ERROR 1082 /* 10 bit addr incl in design */
/* value after reset not valid */
#define XST_IIC_CR_READBACK_ERROR 1083 /* Read of the control register */
/* didn't return value written */
#define XST_IIC_DTR_READBACK_ERROR 1084 /* Read of the data Tx reg */
/* didn't return value written */
#define XST_IIC_DRR_READBACK_ERROR 1085 /* Read of the data Receive reg */
/* didn't return value written */
#define XST_IIC_ADR_READBACK_ERROR 1086 /* Read of the data Tx reg */
/* didn't return value written */
#define XST_IIC_TBA_READBACK_ERROR 1087 /* Read of the 10 bit addr reg */
/* didn't return written value */
#define XST_IIC_NOT_SLAVE 1088 /* The device isn't a slave */
/*********************** ATMC statuses 1101 - 1125 ***************************/
#define XST_ATMC_ERROR_COUNT_MAX 1101L /* the error counters in the ATM
controller hit the max value
which requires the statistics
to be cleared */
/*********************** Flash statuses 1126 - 1150 **************************/
#define XST_FLASH_BUSY 1126L /* Flash is erasing or programming */
#define XST_FLASH_READY 1127L /* Flash is ready for commands */
#define XST_FLASH_ERROR 1128L /* Flash had detected an internal
error. Use XFlash_DeviceControl
to retrieve device specific codes */
#define XST_FLASH_ERASE_SUSPENDED 1129L /* Flash is in suspended erase state */
#define XST_FLASH_WRITE_SUSPENDED 1130L /* Flash is in suspended write state */
#define XST_FLASH_PART_NOT_SUPPORTED 1131L /* Flash type not supported by
driver */
#define XST_FLASH_NOT_SUPPORTED 1132L /* Operation not supported */
#define XST_FLASH_TOO_MANY_REGIONS 1133L /* Too many erase regions */
#define XST_FLASH_TIMEOUT_ERROR 1134L /* Programming or erase operation
aborted due to a timeout */
#define XST_FLASH_ADDRESS_ERROR 1135L /* Accessed flash outside its
addressible range */
#define XST_FLASH_ALIGNMENT_ERROR 1136L /* Write alignment error */
#define XST_FLASH_BLOCKING_CALL_ERROR 1137L /* Couldn't return immediately from
write/erase function with
XFL_NON_BLOCKING_WRITE/ERASE
option cleared */
#define XST_FLASH_CFI_QUERY_ERROR 1138L /* Failed to query the device */
/*********************** SPI statuses 1151 - 1175 ****************************/
#define XST_SPI_MODE_FAULT 1151 /* master was selected as slave */
#define XST_SPI_TRANSFER_DONE 1152 /* data transfer is complete */
#define XST_SPI_TRANSMIT_UNDERRUN 1153 /* slave underruns transmit register */
#define XST_SPI_RECEIVE_OVERRUN 1154 /* device overruns receive register */
#define XST_SPI_NO_SLAVE 1155 /* no slave has been selected yet */
#define XST_SPI_TOO_MANY_SLAVES 1156 /* more than one slave is being
* selected */
#define XST_SPI_NOT_MASTER 1157 /* operation is valid only as master */
#define XST_SPI_SLAVE_ONLY 1158 /* device is configured as slave-only */
#define XST_SPI_SLAVE_MODE_FAULT 1159 /* slave was selected while disabled */
/********************** OPB Arbiter statuses 1176 - 1200 *********************/
#define XST_OPBARB_INVALID_PRIORITY 1176 /* the priority registers have either
* one master assigned to two or more
* priorities, or one master not
* assigned to any priority
*/
#define XST_OPBARB_NOT_SUSPENDED 1177 /* an attempt was made to modify the
* priority levels without first
* suspending the use of priority
* levels
*/
#define XST_OPBARB_PARK_NOT_ENABLED 1178 /* bus parking by id was enabled but
* bus parking was not enabled
*/
#define XST_OPBARB_NOT_FIXED_PRIORITY 1179 /* the arbiter must be in fixed
* priority mode to allow the
* priorities to be changed
*/
/************************ Intc statuses 1201 - 1225 **************************/
#define XST_INTC_FAIL_SELFTEST 1201 /* self test failed */
#define XST_INTC_CONNECT_ERROR 1202 /* interrupt already in use */
/********************** TmrCtr statuses 1226 - 1250 **************************/
#define XST_TMRCTR_TIMER_FAILED 1226 /* self test failed */
/********************** WdtTb statuses 1251 - 1275 ***************************/
#define XST_WDTTB_TIMER_FAILED 1251L
/********************** PlbArb statuses 1276 - 1300 **************************/
#define XST_PLBARB_FAIL_SELFTEST 1276L
/********************** Plb2Opb statuses 1301 - 1325 *************************/
#define XST_PLB2OPB_FAIL_SELFTEST 1301L
/********************** Opb2Plb statuses 1326 - 1350 *************************/
#define XST_OPB2PLB_FAIL_SELFTEST 1326L
/********************** SysAce statuses 1351 - 1360 **************************/
#define XST_SYSACE_NO_LOCK 1351L /* No MPU lock has been granted */
/********************** PCI Bridge statuses 1361 - 1375 **********************/
#define XST_PCI_INVALID_ADDRESS 1361L
/**************************** Type Definitions *******************************/
/**
* The status typedef.
*/
typedef u32 XStatus;
/***************** Macros (Inline Functions) Definitions *********************/
/************************** Function Prototypes ******************************/
#endif /* end of protection macro */