u-boot/include/configs/mx6ul_14x14_evk.h

242 lines
6.5 KiB
C
Raw Normal View History

/*
* Copyright (C) 2015 Freescale Semiconductor, Inc.
*
* Configuration settings for the Freescale i.MX6UL 14x14 EVK board.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __MX6UL_14X14_EVK_CONFIG_H
#define __MX6UL_14X14_EVK_CONFIG_H
#include <asm/arch/imx-regs.h>
#include <linux/sizes.h>
#include "mx6_common.h"
#include <asm/imx-common/gpio.h>
imx: mx6ul: support mx6ul 9x9 evk board This patch is to support mx6ul_9x9_evk board based on mx6ul_14x14_evk, the difference between mx6ul 9x9 evk and mx6ul 14x14 evk are: 1. mx6ul 9x9 evk use pfuze3000, while mx6ul 14x14 evk use DCDC. 2. mx6ul 9x9 evk supports 256MB LPDDR2, while mx6ul 14x14 evk supports 512MB DDR3 3. mx6ul_9x9_evk use 9x9 package, while mx6ul_14x14_evk use 14x14 package. This patch add the following: 1. Discard PHYS_SDRAM_SIZE from header file, use imx_ddr_size() 2. Introduce a macro is_mx6ul_9x9_evk using CONFIG_IS_ENABLED(TARGET_MX6UL_9X9_EVK) to avoid "#ifdef xxx" in non-SPL part. To SPL part, CONFIG_IS_ENABLED(TARGET_MX6UL_9X9_EVK) can not work, so still use "#ifdef CONFIG_TARGET_MX6UL_9X9_EVK" to differentiate with mx6ul_14x14_evk. And we have no way to dymaically checking this chip is 9x9 or 14x14. 3. mx6ul_9x9_evk use pfuze3000, so enabled POWER related configurations. POWER related configurations also effect for mx6ul_14x14_evk. But power_init_board implementation using 'if (is_mx6ul_9x9_evk())' to do initialization for mx6ul_9x9_evk, and do nothing for mx6ul_14x14_evk. 4. mx6ul_9x9_evk use lpddr2 with size 256MB, so add related SPL DRAM configurations. 5. Enable CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG and setting dtb file according to board_rev and board_name. 6. Add TARGET_MX6UL_9X9_EVK Kconfig entry Boot Log: U-Boot SPL 2015.10-rc2-00356-g536ce34 (Sep 06 2015 - 12:22:53) reading u-boot.img reading u-boot.img U-Boot 2015.10-rc2-00356-g536ce34 (Sep 06 2015 - 12:22:53 +0800) CPU: Freescale i.MX6UL rev1.0 792 MHz (running at 396 MHz) CPU: Commercial temperature grade (0C to 95C) at 41C Reset cause: POR Board: MX6UL 9x9 EVK I2C: ready DRAM: 256 MiB PMIC: PFUZE3000 DEV_ID=0x30 REV_ID=0x11 MMC: FSL_SDHC: 0, FSL_SDHC: 1 In: serial Out: serial Err: serial Net: FEC1 Hit any key to stop autoboot: 0 Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Cc: Stefano Babic <sbabic@denx.de>
2015-09-06 07:02:34 +00:00
#define is_mx6ul_9x9_evk() CONFIG_IS_ENABLED(TARGET_MX6UL_9X9_EVK)
/* SPL options */
#include "imx6_spl.h"
imx: mx6ul: support mx6ul 9x9 evk board This patch is to support mx6ul_9x9_evk board based on mx6ul_14x14_evk, the difference between mx6ul 9x9 evk and mx6ul 14x14 evk are: 1. mx6ul 9x9 evk use pfuze3000, while mx6ul 14x14 evk use DCDC. 2. mx6ul 9x9 evk supports 256MB LPDDR2, while mx6ul 14x14 evk supports 512MB DDR3 3. mx6ul_9x9_evk use 9x9 package, while mx6ul_14x14_evk use 14x14 package. This patch add the following: 1. Discard PHYS_SDRAM_SIZE from header file, use imx_ddr_size() 2. Introduce a macro is_mx6ul_9x9_evk using CONFIG_IS_ENABLED(TARGET_MX6UL_9X9_EVK) to avoid "#ifdef xxx" in non-SPL part. To SPL part, CONFIG_IS_ENABLED(TARGET_MX6UL_9X9_EVK) can not work, so still use "#ifdef CONFIG_TARGET_MX6UL_9X9_EVK" to differentiate with mx6ul_14x14_evk. And we have no way to dymaically checking this chip is 9x9 or 14x14. 3. mx6ul_9x9_evk use pfuze3000, so enabled POWER related configurations. POWER related configurations also effect for mx6ul_14x14_evk. But power_init_board implementation using 'if (is_mx6ul_9x9_evk())' to do initialization for mx6ul_9x9_evk, and do nothing for mx6ul_14x14_evk. 4. mx6ul_9x9_evk use lpddr2 with size 256MB, so add related SPL DRAM configurations. 5. Enable CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG and setting dtb file according to board_rev and board_name. 6. Add TARGET_MX6UL_9X9_EVK Kconfig entry Boot Log: U-Boot SPL 2015.10-rc2-00356-g536ce34 (Sep 06 2015 - 12:22:53) reading u-boot.img reading u-boot.img U-Boot 2015.10-rc2-00356-g536ce34 (Sep 06 2015 - 12:22:53 +0800) CPU: Freescale i.MX6UL rev1.0 792 MHz (running at 396 MHz) CPU: Commercial temperature grade (0C to 95C) at 41C Reset cause: POR Board: MX6UL 9x9 EVK I2C: ready DRAM: 256 MiB PMIC: PFUZE3000 DEV_ID=0x30 REV_ID=0x11 MMC: FSL_SDHC: 0, FSL_SDHC: 1 In: serial Out: serial Err: serial Net: FEC1 Hit any key to stop autoboot: 0 Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Cc: Stefano Babic <sbabic@denx.de>
2015-09-06 07:02:34 +00:00
#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN (16 * SZ_1M)
#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_BOARD_LATE_INIT
#define CONFIG_MXC_UART
#define CONFIG_MXC_UART_BASE UART1_BASE
/* MMC Configs */
#ifdef CONFIG_FSL_USDHC
#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC2_BASE_ADDR
/* NAND pin conflicts with usdhc2 */
#ifdef CONFIG_NAND_MXS
#define CONFIG_SYS_FSL_USDHC_NUM 1
#else
#define CONFIG_SYS_FSL_USDHC_NUM 2
#endif
#endif
/* I2C configs */
#ifdef CONFIG_CMD_I2C
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
#define CONFIG_SYS_I2C_SPEED 100000
imx: mx6ul: support mx6ul 9x9 evk board This patch is to support mx6ul_9x9_evk board based on mx6ul_14x14_evk, the difference between mx6ul 9x9 evk and mx6ul 14x14 evk are: 1. mx6ul 9x9 evk use pfuze3000, while mx6ul 14x14 evk use DCDC. 2. mx6ul 9x9 evk supports 256MB LPDDR2, while mx6ul 14x14 evk supports 512MB DDR3 3. mx6ul_9x9_evk use 9x9 package, while mx6ul_14x14_evk use 14x14 package. This patch add the following: 1. Discard PHYS_SDRAM_SIZE from header file, use imx_ddr_size() 2. Introduce a macro is_mx6ul_9x9_evk using CONFIG_IS_ENABLED(TARGET_MX6UL_9X9_EVK) to avoid "#ifdef xxx" in non-SPL part. To SPL part, CONFIG_IS_ENABLED(TARGET_MX6UL_9X9_EVK) can not work, so still use "#ifdef CONFIG_TARGET_MX6UL_9X9_EVK" to differentiate with mx6ul_14x14_evk. And we have no way to dymaically checking this chip is 9x9 or 14x14. 3. mx6ul_9x9_evk use pfuze3000, so enabled POWER related configurations. POWER related configurations also effect for mx6ul_14x14_evk. But power_init_board implementation using 'if (is_mx6ul_9x9_evk())' to do initialization for mx6ul_9x9_evk, and do nothing for mx6ul_14x14_evk. 4. mx6ul_9x9_evk use lpddr2 with size 256MB, so add related SPL DRAM configurations. 5. Enable CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG and setting dtb file according to board_rev and board_name. 6. Add TARGET_MX6UL_9X9_EVK Kconfig entry Boot Log: U-Boot SPL 2015.10-rc2-00356-g536ce34 (Sep 06 2015 - 12:22:53) reading u-boot.img reading u-boot.img U-Boot 2015.10-rc2-00356-g536ce34 (Sep 06 2015 - 12:22:53 +0800) CPU: Freescale i.MX6UL rev1.0 792 MHz (running at 396 MHz) CPU: Commercial temperature grade (0C to 95C) at 41C Reset cause: POR Board: MX6UL 9x9 EVK I2C: ready DRAM: 256 MiB PMIC: PFUZE3000 DEV_ID=0x30 REV_ID=0x11 MMC: FSL_SDHC: 0, FSL_SDHC: 1 In: serial Out: serial Err: serial Net: FEC1 Hit any key to stop autoboot: 0 Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Cc: Stefano Babic <sbabic@denx.de>
2015-09-06 07:02:34 +00:00
/* PMIC only for 9X9 EVK */
#define CONFIG_POWER
#define CONFIG_POWER_I2C
#define CONFIG_POWER_PFUZE3000
#define CONFIG_POWER_PFUZE3000_I2C_ADDR 0x08
#endif
#define CONFIG_SYS_MMC_IMG_LOAD_PART 1
#define CONFIG_EXTRA_ENV_SETTINGS \
"script=boot.scr\0" \
"image=zImage\0" \
"console=ttymxc0\0" \
"fdt_high=0xffffffff\0" \
"initrd_high=0xffffffff\0" \
imx: mx6ul: support mx6ul 9x9 evk board This patch is to support mx6ul_9x9_evk board based on mx6ul_14x14_evk, the difference between mx6ul 9x9 evk and mx6ul 14x14 evk are: 1. mx6ul 9x9 evk use pfuze3000, while mx6ul 14x14 evk use DCDC. 2. mx6ul 9x9 evk supports 256MB LPDDR2, while mx6ul 14x14 evk supports 512MB DDR3 3. mx6ul_9x9_evk use 9x9 package, while mx6ul_14x14_evk use 14x14 package. This patch add the following: 1. Discard PHYS_SDRAM_SIZE from header file, use imx_ddr_size() 2. Introduce a macro is_mx6ul_9x9_evk using CONFIG_IS_ENABLED(TARGET_MX6UL_9X9_EVK) to avoid "#ifdef xxx" in non-SPL part. To SPL part, CONFIG_IS_ENABLED(TARGET_MX6UL_9X9_EVK) can not work, so still use "#ifdef CONFIG_TARGET_MX6UL_9X9_EVK" to differentiate with mx6ul_14x14_evk. And we have no way to dymaically checking this chip is 9x9 or 14x14. 3. mx6ul_9x9_evk use pfuze3000, so enabled POWER related configurations. POWER related configurations also effect for mx6ul_14x14_evk. But power_init_board implementation using 'if (is_mx6ul_9x9_evk())' to do initialization for mx6ul_9x9_evk, and do nothing for mx6ul_14x14_evk. 4. mx6ul_9x9_evk use lpddr2 with size 256MB, so add related SPL DRAM configurations. 5. Enable CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG and setting dtb file according to board_rev and board_name. 6. Add TARGET_MX6UL_9X9_EVK Kconfig entry Boot Log: U-Boot SPL 2015.10-rc2-00356-g536ce34 (Sep 06 2015 - 12:22:53) reading u-boot.img reading u-boot.img U-Boot 2015.10-rc2-00356-g536ce34 (Sep 06 2015 - 12:22:53 +0800) CPU: Freescale i.MX6UL rev1.0 792 MHz (running at 396 MHz) CPU: Commercial temperature grade (0C to 95C) at 41C Reset cause: POR Board: MX6UL 9x9 EVK I2C: ready DRAM: 256 MiB PMIC: PFUZE3000 DEV_ID=0x30 REV_ID=0x11 MMC: FSL_SDHC: 0, FSL_SDHC: 1 In: serial Out: serial Err: serial Net: FEC1 Hit any key to stop autoboot: 0 Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Cc: Stefano Babic <sbabic@denx.de>
2015-09-06 07:02:34 +00:00
"fdt_file=undefined\0" \
"fdt_addr=0x83000000\0" \
"boot_fdt=try\0" \
"ip_dyn=yes\0" \
"videomode=video=ctfb:x:480,y:272,depth:24,pclk:108695,le:8,ri:4,up:2,lo:4,hs:41,vs:10,sync:0,vmode:0\0" \
"mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
"mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
"mmcautodetect=yes\0" \
"mmcargs=setenv bootargs console=${console},${baudrate} " \
"root=${mmcroot}\0" \
"loadbootscript=" \
"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
"bootscript=echo Running bootscript from mmc ...; " \
"source\0" \
"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
"mmcboot=echo Booting from mmc ...; " \
"run mmcargs; " \
"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
"if run loadfdt; then " \
"bootz ${loadaddr} - ${fdt_addr}; " \
"else " \
"if test ${boot_fdt} = try; then " \
"bootz; " \
"else " \
"echo WARN: Cannot load the DT; " \
"fi; " \
"fi; " \
"else " \
"bootz; " \
"fi;\0" \
"netargs=setenv bootargs console=${console},${baudrate} " \
"root=/dev/nfs " \
"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
"netboot=echo Booting from net ...; " \
"run netargs; " \
"if test ${ip_dyn} = yes; then " \
"setenv get_cmd dhcp; " \
"else " \
"setenv get_cmd tftp; " \
"fi; " \
"${get_cmd} ${image}; " \
"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
"bootz ${loadaddr} - ${fdt_addr}; " \
"else " \
"if test ${boot_fdt} = try; then " \
"bootz; " \
"else " \
"echo WARN: Cannot load the DT; " \
"fi; " \
"fi; " \
"else " \
"bootz; " \
imx: mx6ul: support mx6ul 9x9 evk board This patch is to support mx6ul_9x9_evk board based on mx6ul_14x14_evk, the difference between mx6ul 9x9 evk and mx6ul 14x14 evk are: 1. mx6ul 9x9 evk use pfuze3000, while mx6ul 14x14 evk use DCDC. 2. mx6ul 9x9 evk supports 256MB LPDDR2, while mx6ul 14x14 evk supports 512MB DDR3 3. mx6ul_9x9_evk use 9x9 package, while mx6ul_14x14_evk use 14x14 package. This patch add the following: 1. Discard PHYS_SDRAM_SIZE from header file, use imx_ddr_size() 2. Introduce a macro is_mx6ul_9x9_evk using CONFIG_IS_ENABLED(TARGET_MX6UL_9X9_EVK) to avoid "#ifdef xxx" in non-SPL part. To SPL part, CONFIG_IS_ENABLED(TARGET_MX6UL_9X9_EVK) can not work, so still use "#ifdef CONFIG_TARGET_MX6UL_9X9_EVK" to differentiate with mx6ul_14x14_evk. And we have no way to dymaically checking this chip is 9x9 or 14x14. 3. mx6ul_9x9_evk use pfuze3000, so enabled POWER related configurations. POWER related configurations also effect for mx6ul_14x14_evk. But power_init_board implementation using 'if (is_mx6ul_9x9_evk())' to do initialization for mx6ul_9x9_evk, and do nothing for mx6ul_14x14_evk. 4. mx6ul_9x9_evk use lpddr2 with size 256MB, so add related SPL DRAM configurations. 5. Enable CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG and setting dtb file according to board_rev and board_name. 6. Add TARGET_MX6UL_9X9_EVK Kconfig entry Boot Log: U-Boot SPL 2015.10-rc2-00356-g536ce34 (Sep 06 2015 - 12:22:53) reading u-boot.img reading u-boot.img U-Boot 2015.10-rc2-00356-g536ce34 (Sep 06 2015 - 12:22:53 +0800) CPU: Freescale i.MX6UL rev1.0 792 MHz (running at 396 MHz) CPU: Commercial temperature grade (0C to 95C) at 41C Reset cause: POR Board: MX6UL 9x9 EVK I2C: ready DRAM: 256 MiB PMIC: PFUZE3000 DEV_ID=0x30 REV_ID=0x11 MMC: FSL_SDHC: 0, FSL_SDHC: 1 In: serial Out: serial Err: serial Net: FEC1 Hit any key to stop autoboot: 0 Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Cc: Stefano Babic <sbabic@denx.de>
2015-09-06 07:02:34 +00:00
"fi;\0" \
"findfdt="\
"if test $fdt_file = undefined; then " \
"if test $board_name = EVK && test $board_rev = 9X9; then " \
"setenv fdt_file imx6ul-9x9-evk.dtb; fi; " \
"if test $board_name = EVK && test $board_rev = 14X14; then " \
"setenv fdt_file imx6ul-14x14-evk.dtb; fi; " \
"if test $fdt_file = undefined; then " \
"echo WARNING: Could not determine dtb to use; fi; " \
"fi;\0" \
#define CONFIG_BOOTCOMMAND \
imx: mx6ul: support mx6ul 9x9 evk board This patch is to support mx6ul_9x9_evk board based on mx6ul_14x14_evk, the difference between mx6ul 9x9 evk and mx6ul 14x14 evk are: 1. mx6ul 9x9 evk use pfuze3000, while mx6ul 14x14 evk use DCDC. 2. mx6ul 9x9 evk supports 256MB LPDDR2, while mx6ul 14x14 evk supports 512MB DDR3 3. mx6ul_9x9_evk use 9x9 package, while mx6ul_14x14_evk use 14x14 package. This patch add the following: 1. Discard PHYS_SDRAM_SIZE from header file, use imx_ddr_size() 2. Introduce a macro is_mx6ul_9x9_evk using CONFIG_IS_ENABLED(TARGET_MX6UL_9X9_EVK) to avoid "#ifdef xxx" in non-SPL part. To SPL part, CONFIG_IS_ENABLED(TARGET_MX6UL_9X9_EVK) can not work, so still use "#ifdef CONFIG_TARGET_MX6UL_9X9_EVK" to differentiate with mx6ul_14x14_evk. And we have no way to dymaically checking this chip is 9x9 or 14x14. 3. mx6ul_9x9_evk use pfuze3000, so enabled POWER related configurations. POWER related configurations also effect for mx6ul_14x14_evk. But power_init_board implementation using 'if (is_mx6ul_9x9_evk())' to do initialization for mx6ul_9x9_evk, and do nothing for mx6ul_14x14_evk. 4. mx6ul_9x9_evk use lpddr2 with size 256MB, so add related SPL DRAM configurations. 5. Enable CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG and setting dtb file according to board_rev and board_name. 6. Add TARGET_MX6UL_9X9_EVK Kconfig entry Boot Log: U-Boot SPL 2015.10-rc2-00356-g536ce34 (Sep 06 2015 - 12:22:53) reading u-boot.img reading u-boot.img U-Boot 2015.10-rc2-00356-g536ce34 (Sep 06 2015 - 12:22:53 +0800) CPU: Freescale i.MX6UL rev1.0 792 MHz (running at 396 MHz) CPU: Commercial temperature grade (0C to 95C) at 41C Reset cause: POR Board: MX6UL 9x9 EVK I2C: ready DRAM: 256 MiB PMIC: PFUZE3000 DEV_ID=0x30 REV_ID=0x11 MMC: FSL_SDHC: 0, FSL_SDHC: 1 In: serial Out: serial Err: serial Net: FEC1 Hit any key to stop autoboot: 0 Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Cc: Stefano Babic <sbabic@denx.de>
2015-09-06 07:02:34 +00:00
"run findfdt;" \
"mmc dev ${mmcdev};" \
"mmc dev ${mmcdev}; if mmc rescan; then " \
"if run loadbootscript; then " \
"run bootscript; " \
"else " \
"if run loadimage; then " \
"run mmcboot; " \
"else run netboot; " \
"fi; " \
"fi; " \
"else run netboot; fi"
/* Miscellaneous configurable options */
#define CONFIG_SYS_MEMTEST_START 0x80000000
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x8000000)
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
#define CONFIG_SYS_HZ 1000
#define CONFIG_CMDLINE_EDITING
#define CONFIG_STACKSIZE SZ_128K
/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS 1
#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
#define CONFIG_SYS_INIT_SP_OFFSET \
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
/* FLASH and environment organization */
#define CONFIG_SYS_NO_FLASH
#define CONFIG_ENV_SIZE SZ_8K
#define CONFIG_ENV_IS_IN_MMC
#define CONFIG_ENV_OFFSET (8 * SZ_64K)
#define CONFIG_SYS_MMC_ENV_DEV 1 /* USDHC2 */
#define CONFIG_SYS_MMC_ENV_PART 0 /* user area */
#define CONFIG_MMCROOT "/dev/mmcblk1p2" /* USDHC2 */
#define CONFIG_CMD_BMODE
#ifndef CONFIG_SYS_DCACHE_OFF
#endif
#ifdef CONFIG_FSL_QSPI
#define CONFIG_SF_DEFAULT_BUS 0
#define CONFIG_SF_DEFAULT_CS 0
#define CONFIG_SF_DEFAULT_SPEED 40000000
#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
#define FSL_QSPI_FLASH_NUM 1
#define FSL_QSPI_FLASH_SIZE SZ_32M
#endif
/* USB Configs */
#ifdef CONFIG_CMD_USB
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_MX6
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_MXC_USB_FLAGS 0
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
#endif
#ifdef CONFIG_CMD_NET
#define CONFIG_FEC_MXC
#define CONFIG_MII
#define CONFIG_FEC_ENET_DEV 1
#if (CONFIG_FEC_ENET_DEV == 0)
#define IMX_FEC_BASE ENET_BASE_ADDR
#define CONFIG_FEC_MXC_PHYADDR 0x2
#define CONFIG_FEC_XCV_TYPE RMII
#elif (CONFIG_FEC_ENET_DEV == 1)
#define IMX_FEC_BASE ENET2_BASE_ADDR
#define CONFIG_FEC_MXC_PHYADDR 0x1
#define CONFIG_FEC_XCV_TYPE RMII
#endif
#define CONFIG_ETHPRIME "FEC"
#define CONFIG_PHYLIB
#define CONFIG_PHY_MICREL
#endif
#define CONFIG_IMX_THERMAL
#ifndef CONFIG_SPL_BUILD
#ifdef CONFIG_VIDEO
#define CONFIG_VIDEO_MXS
#define CONFIG_VIDEO_LOGO
#define CONFIG_SPLASH_SCREEN
#define CONFIG_SPLASH_SCREEN_ALIGN
#define CONFIG_CMD_BMP
#define CONFIG_BMP_16BPP
#define CONFIG_VIDEO_BMP_RLE8
#define CONFIG_VIDEO_BMP_LOGO
#define MXS_LCDIF_BASE MX6UL_LCDIF1_BASE_ADDR
#endif
#endif
#endif