u-boot/board/genesi/mx51_efikamx/Makefile

#
# Copyright (C) 2010, Marek Vasut <marek.vasut@gmail.com>
#
# BASED ON: imx51evk
#
# Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de>
#
# (C) Copyright 2009 Freescale Semiconductor, Inc.
#
# SPDX-License-Identifier:	GPL-2.0+
#

include $(TOPDIR)/config.mk

LIB	= $(obj)lib$(BOARD).o

COBJS	:= efikamx.o efikamx-usb.o

SRCS	:= $(COBJS:.o=.c)
OBJS	:= $(addprefix $(obj),$(COBJS))

$(LIB):	$(obj).depend $(OBJS)
	$(call cmd_link_o_target, $(OBJS))

#########################################################################

# defines $(obj).depend target
include $(SRCTREE)/rules.mk

sinclude $(obj).depend

#########################################################################
iMX5: EfikaMX: Preliminary board support Supported: MMC IDE PMIC SPI flash LEDs I can boot the kernel supplied by freescale/genesi with this from MMC card and/or PATA disk. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> 2011-01-19 04:40:37 +00:00			`#`
			`# Copyright (C) 2010, Marek Vasut <marek.vasut@gmail.com>`
			`#`
			`# BASED ON: imx51evk`
			`#`
			`# Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de>`
			`#`
			`# (C) Copyright 2009 Freescale Semiconductor, Inc.`
			`#`
Add GPL-2.0+ SPDX-License-Identifier to source files Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com> 2013-07-08 07:37:19 +00:00			`# SPDX-License-Identifier: GPL-2.0+`
iMX5: EfikaMX: Preliminary board support Supported: MMC IDE PMIC SPI flash LEDs I can boot the kernel supplied by freescale/genesi with this from MMC card and/or PATA disk. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> 2011-01-19 04:40:37 +00:00			`#`

			`include $(TOPDIR)/config.mk`

			`LIB = $(obj)lib$(BOARD).o`

efikamx: refine USB support Because of the way USB pad settings are handled it doesn't make sense to be able to build the Efika MX board support without CONFIG_CMD_USB turned on. So, we change the build to always compile in USB support. We do not need to check for CONFIG_CMD_USB like we do with CONFIG_MXC_SPI since the USB subsystem will error out of the compile for us. Additionally, the following behaviors have changed; * Smartbook "preboot" should not set input and output to USB keyboard as there is no display support * board_eth_init is implemented such that it does not cause U-Boot to report an explicit failure ("CPU Net Initialization Failed"). Since Ethernet is implemented via USB (fixed on Smarttop, pluggable on Smartbook, and handled by "usb start") - the warning that is left ("No ethernet found") is perfectly reasonable at the point it is printed since the USB system hasn't been started and nothing has been probed yet. Signed-off-by: Matt Sealey <matt@genesi-usa.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Marek Vasut <marex@denx.de> 2012-08-23 04:52:33 +00:00			`COBJS := efikamx.o efikamx-usb.o`
USB: efikamx: Enable USB on EfikaMX and EfikaSB Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Remy Bohmer <linux@bohmer.net> Cc: Wolfgang Grandegger <wg@denx.de> Cc: Jason Liu <r64343@freescale.com> 2011-06-24 19:46:07 +00:00
efikamx: Remove unused SOBJS There is no .S file in this directory, so just remove SOBJS. Cc: Marek Vasut <marex@denx.de> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> 2012-05-29 07:39:59 +00:00			`SRCS := $(COBJS:.o=.c)`
iMX5: EfikaMX: Preliminary board support Supported: MMC IDE PMIC SPI flash LEDs I can boot the kernel supplied by freescale/genesi with this from MMC card and/or PATA disk. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> 2011-01-19 04:40:37 +00:00			`OBJS := $(addprefix $(obj),$(COBJS))`

efikamx: Remove unused SOBJS There is no .S file in this directory, so just remove SOBJS. Cc: Marek Vasut <marex@denx.de> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> 2012-05-29 07:39:59 +00:00			`$(LIB): $(obj).depend $(OBJS)`
			`$(call cmd_link_o_target, $(OBJS))`
iMX5: EfikaMX: Preliminary board support Supported: MMC IDE PMIC SPI flash LEDs I can boot the kernel supplied by freescale/genesi with this from MMC card and/or PATA disk. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> 2011-01-19 04:40:37 +00:00
			`#########################################################################`

			`# defines $(obj).depend target`
			`include $(SRCTREE)/rules.mk`

			`sinclude $(obj).depend`

			`#########################################################################`