u-boot/include/configs/r2dplus.h

127 lines
3.2 KiB
C
Raw Normal View History

#ifndef __CONFIG_H
#define __CONFIG_H
#undef DEBUG
#define CONFIG_SH 1
#define CONFIG_SH4 1
#define CONFIG_CPU_SH7751 1
#define CONFIG_CPU_SH_TYPE_R 1
#define CONFIG_R2DPLUS 1
#define __LITTLE_ENDIAN__ 1
/*
* Command line configuration.
*/
#include <config_cmd_default.h>
#define CONFIG_CMD_DFL
#define CONFIG_CMD_CACHE
#define CONFIG_CMD_FLASH
#define CONFIG_CMD_PCI
#define CONFIG_CMD_NET
#define CONFIG_CMD_PING
#define CONFIG_CMD_IDE
#define CONFIG_CMD_EXT2
#define CONFIG_DOS_PARTITION
/* SCIF */
#define CONFIG_SCIF_CONSOLE 1
#define CONFIG_BAUDRATE 115200
#define CONFIG_CONS_SCIF1 1
#define BOARD_LATE_INIT 1
#define CONFIG_BOOTDELAY -1
#define CONFIG_BOOTARGS "console=ttySC0,115200"
#define CONFIG_ENV_OVERWRITE 1
/* SDRAM */
#define CFG_SDRAM_BASE (0x8C000000)
#define CFG_SDRAM_SIZE (0x04000000)
#define CFG_LONGHELP
#define CFG_PROMPT "=> "
#define CFG_CBSIZE 256
#define CFG_PBSIZE 256
#define CFG_MAXARGS 16
#define CFG_BARGSIZE 512
/* List of legal baudrate settings for this board */
#define CFG_BAUDRATE_TABLE { 115200, 57600, 38400, 19200, 9600 }
#define CFG_MEMTEST_START (CFG_SDRAM_BASE)
#define CFG_MEMTEST_END (TEXT_BASE - 0x100000)
#define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 32 * 1024 * 1024)
/* Address of u-boot image in Flash */
#define CFG_MONITOR_BASE (CFG_FLASH_BASE)
#define CFG_MONITOR_LEN (256 * 1024)
/* Size of DRAM reserved for malloc() use */
#define CFG_MALLOC_LEN (1024 * 1024)
/* size in bytes reserved for initial data */
#define CFG_GBL_DATA_SIZE (256)
#define CFG_BOOTMAPSZ (8 * 1024 * 1024)
/*
* NOR Flash ( Spantion S29GL256P )
*/
#define CFG_FLASH_CFI
#define CONFIG_FLASH_CFI_DRIVER
#define CFG_FLASH_BASE (0xA0000000)
#define CFG_MAX_FLASH_BANKS (1)
#define CFG_MAX_FLASH_SECT 256
#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE }
#define CFG_ENV_IS_IN_FLASH
#define CFG_ENV_SECT_SIZE 0x40000
#define CFG_ENV_SIZE (CFG_ENV_SECT_SIZE)
#define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN)
/*
* SuperH Clock setting
*/
#define CONFIG_SYS_CLK_FREQ 60000000
#define TMU_CLK_DIVIDER 4
#define CFG_HZ (CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER)
#define CFG_PLL_SETTLING_TIME 100/* in us */
/*
* IDE support
*/
#define CONFIG_IDE_RESET 1
#define CFG_PIO_MODE 1
#define CFG_IDE_MAXBUS 1 /* IDE bus */
#define CFG_IDE_MAXDEVICE 1
#define CFG_ATA_BASE_ADDR 0xb4000000
#define CFG_ATA_STRIDE 2 /* 1bit shift */
#define CFG_ATA_DATA_OFFSET 0x1000 /* data reg offset */
#define CFG_ATA_REG_OFFSET 0x1000 /* reg offset */
#define CFG_ATA_ALT_OFFSET 0x800 /* alternate register offset */
/*
* SuperH PCI Bridge Configration
*/
#define CONFIG_PCI
#define CONFIG_SH4_PCI
#define CONFIG_SH7751_PCI
#define CONFIG_PCI_PNP
#define CONFIG_PCI_SCAN_SHOW 1
#define __io
#define __mem_pci
#define CONFIG_PCI_MEM_BUS 0xFD000000 /* Memory space base addr */
#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS
#define CONFIG_PCI_MEM_SIZE 0x01000000 /* Size of Memory window */
#define CONFIG_PCI_IO_BUS 0xFE240000 /* IO space base address */
#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS
#define CONFIG_PCI_IO_SIZE 0x00040000 /* Size of IO window */
/*
* Network device (RTL8139) support
*/
#define CONFIG_NET_MULTI
#define CONFIG_RTL8139
#define _IO_BASE 0x00000000
#define KSEG1ADDR(x) (x)
#endif /* __CONFIG_H */