Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-18 18:59:44 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/configs/dh_imx6_defconfig

99 lines
2.3 KiB
Text
Raw Normal View History

ARM: imx6: Add DHCOM i.MX6 PDK board support Add support for the DHCOM i.MX6 PDK board. This board has: - FEC ethernet - EHCI USB host - 3x SDMMC Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2017-10-09 19:51:10 +00:00
CONFIG_ARM=y
CONFIG_ARCH_MX6=y
configs: Migrate CONFIG_SYS_TEXT_BASE On the NIOS2 and Xtensa architectures, we do not have CONFIG_SYS_TEXT_BASE set. This is a strict migration of the current values into the defconfig and removing them from the headers. I did not attempt to add more default values in and for now will leave that to maintainers. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-02-03 17:10:38 +00:00
CONFIG_SYS_TEXT_BASE=0x17800000
ARM: imx6: Add DHCOM i.MX6 PDK board support Add support for the DHCOM i.MX6 PDK board. This board has: - FEC ethernet - EHCI USB host - 3x SDMMC Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2017-10-09 19:51:10 +00:00
CONFIG_SPL_GPIO_SUPPORT=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_MX6_DDRCAL=y
CONFIG_TARGET_DHCOMIMX6=y
env: Finish migration of common ENV options - In ARMv8 NXP Layerscape platforms we also need to make use of CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so. - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define to 0. - Add Kconfig entry for ENV_ADDR. - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it. - Add ENV_xxx_REDUND options that depend on their primary option and SYS_REDUNDAND_ENVIRONMENT - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR for the pre-main-U-Boot environment location. - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but rather it being non-zero, as it will now be zero by default. - Rework the env_offset absolute in env/embedded.o to not use CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within ENV_IS_IN_FLASH. - Migrate all platforms. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: uboot-stm32@st-md-mailman.stormreply.com Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-11-19 01:02:10 +00:00
CONFIG_ENV_SIZE=0x4000
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-01-22 18:38:00 +00:00
CONFIG_ENV_SECT_SIZE=0x10000
env: Finish migration of common ENV options - In ARMv8 NXP Layerscape platforms we also need to make use of CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so. - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define to 0. - Add Kconfig entry for ENV_ADDR. - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it. - Add ENV_xxx_REDUND options that depend on their primary option and SYS_REDUNDAND_ENVIRONMENT - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR for the pre-main-U-Boot environment location. - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but rather it being non-zero, as it will now be zero by default. - Rework the env_offset absolute in env/embedded.o to not use CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within ENV_IS_IN_FLASH. - Migrate all platforms. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: uboot-stm32@st-md-mailman.stormreply.com Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-11-19 01:02:10 +00:00
CONFIG_ENV_OFFSET=0x100000
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-01-22 18:38:00 +00:00
CONFIG_DM_GPIO=y
CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-02-06 18:42:52 +00:00
CONFIG_SYS_BOOTCOUNT_ADDR=0x00900000
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2019-04-29 19:54:04 +00:00
CONFIG_NR_DRAM_BANKS=1
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2018-06-04 15:57:37 +00:00
CONFIG_SPL=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-02-28 18:28:38 +00:00
CONFIG_ENV_OFFSET_REDUND=0x110000
ARM: imx6: Add DHCOM i.MX6 PDK board support Add support for the DHCOM i.MX6 PDK board. This board has: - FEC ethernet - EHCI USB host - 3x SDMMC Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2017-10-09 19:51:10 +00:00
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
ARM: imx: dh-imx6: Convert SATA support to DM Enable DM SATA support on DHCOM iMX6 PDK2. Convert board code to match the DM support. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Ludwig Zenz <lzenz@dh-electronics.com> Cc: Stefano Babic <sbabic@denx.de>
2019-05-17 14:58:52 +00:00
CONFIG_AHCI=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2019-09-23 15:47:37 +00:00
CONFIG_SPL_TEXT_BASE=0x00908000
configs: Re-sync with CONFIG_DISTRO_DEFAULTS A number of platforms include config_distro_defaults.h but do not enable CONFIG_DISTRO_DEFAULTS. As they plainly intended to, set that flag and re-sync config files. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-02-10 21:54:38 +00:00
CONFIG_DISTRO_DEFAULTS=y
ARM: imx: dh-imx6: Enable DM pin control Enable DM pin control support on DHCOM iMX6 PDK2. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Ludwig Zenz <lzenz@dh-electronics.com> Cc: Stefano Babic <sbabic@denx.de>
2019-05-17 14:58:49 +00:00
# CONFIG_SYS_MALLOC_F is not set
ARM: imx6: Add DHCOM i.MX6 PDK board support Add support for the DHCOM i.MX6 PDK board. This board has: - FEC ethernet - EHCI USB host - 3x SDMMC Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2017-10-09 19:51:10 +00:00
CONFIG_FIT=y
ARM: imx6: DHCOM i.MX6 PDK: config SPL to load U-Boot fitImage with mulitple DTs Configure fitImage for U-Boot with a device tree for imx6 quad/dual and duallite/solo. This enables to support the imx6 derivates quad/dual/duallite/solo with a single binary. Signed-off-by: Ludwig Zenz <lzenz@dh-electronics.com> Reviewed-by: Marek Vasut <marex@denx.de>
2019-07-02 12:49:49 +00:00
CONFIG_SPL_FIT=y
mx6: Select MX6QDL option via Kconfig Currently the MX6QDL option is selected via CONFIG_SYS_EXTRA_OPTIONS, but it is better to select it directly via Kconfig. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2017-11-15 19:04:03 +00:00
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
ARM: imx6: Add DHCOM i.MX6 PDK board support Add support for the DHCOM i.MX6 PDK board. This board has: - FEC ethernet - EHCI USB host - 3x SDMMC Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2017-10-09 19:51:10 +00:00
CONFIG_BOOTDELAY=3
configs: Re-sync with CONFIG_DISTRO_DEFAULTS A number of platforms include config_distro_defaults.h but do not enable CONFIG_DISTRO_DEFAULTS. As they plainly intended to, set that flag and re-sync config files. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-02-10 21:54:38 +00:00
# CONFIG_USE_BOOTCOMMAND is not set
ARM: imx6: Add DHCOM i.MX6 PDK board support Add support for the DHCOM i.MX6 PDK board. This board has: - FEC ethernet - EHCI USB host - 3x SDMMC Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2017-10-09 19:51:10 +00:00
CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
Kconfig: Migrate BOUNCE_BUFFER The bounce buffer is used by a few drivers (most of the MMC drivers) to overcome limitations in their respective DMA implementation. This moves the configuration to Kconfig and makes it user-selectable (even though it will be a required feature to make those drivers work): the expected usage is for drivers depending on this to 'select' it unconditionally from their respective Kconfig (see follow-up patches). This commit includes a full migration using moveconfig.py to ensure that each commit compiles. To ensure bisectability we update dependencies of various drivers to now select BOUNCE_BUFFER when needed. [trini: Squash all patches to ensure bisectability] Signed-off-by: Tom Rini <trini@konsulko.com> Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Otavio Salvador <otavio@ossystems.com.br> [dw_mmc portion] Reviewed-by: Fabio Estevam <festevam@gmail.com> [mxsmmc portion] Reviewed-by: Simon Glass <sjg@chromium.org> [tegra portion]
2018-11-30 21:13:25 +00:00
CONFIG_BOUNCE_BUFFER=y
spl: spi: Move CONFIG_SPL_SPI_LOAD to Kconfig Add Kconfig entry for CONFIG_SPL_SPI_LOAD symbol and move all configurations using it to Kconfig. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Tom Rini <trini@konsulko.com>
2018-04-07 14:05:27 +00:00
CONFIG_SPL_SPI_LOAD=y
Convert CONFIG_SYS_SPI_U_BOOT_OFFS to Kconfig This converts the following to Kconfig: CONFIG_SYS_SPI_U_BOOT_OFFS Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com> [trini: Expose this for SPL_SPI_SUNXI for now] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-08-22 13:41:46 +00:00
CONFIG_SYS_SPI_U_BOOT_OFFS=0x11400
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2018-06-04 15:57:37 +00:00
CONFIG_SPL_WATCHDOG_SUPPORT=y
ARM: imx6: Add DHCOM i.MX6 PDK board support Add support for the DHCOM i.MX6 PDK board. This board has: - FEC ethernet - EHCI USB host - 3x SDMMC Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2017-10-09 19:51:10 +00:00
CONFIG_CMD_MEMTEST=y
CONFIG_CMD_UNZIP=y
ARM: imx6: Enable UMS and DFU on DHCOM i.MX6 PDK Enable UMS and DFU, so that the eMMC can be accessed via the USB gadget port on the board. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2017-10-22 08:22:40 +00:00
CONFIG_CMD_DFU=y
ARM: imx6: Add DHCOM i.MX6 PDK board support Add support for the DHCOM i.MX6 PDK board. This board has: - FEC ethernet - EHCI USB host - 3x SDMMC Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2017-10-09 19:51:10 +00:00
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_SATA=y
CONFIG_CMD_USB=y
ARM: imx6: Enable UMS and DFU on DHCOM i.MX6 PDK Enable UMS and DFU, so that the eMMC can be accessed via the USB gadget port on the board. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2017-10-22 08:22:40 +00:00
CONFIG_CMD_USB_MASS_STORAGE=y
ARM: imx6: DHCOM i.MX6 PDK: Enable sysreset driver and wdt command The SPL does not have DM enabled and therefor still needs to use the hardware watchdog interface provided by the imx-watchdog driver. Fixes: broken reset command after f2929d11a639 ("watchdog: imx: Use immediate reset bits for expire_now") Signed-off-by: Claudius Heine <ch@denx.de>
2019-11-29 07:59:03 +00:00
CONFIG_CMD_WDT=y
ARM: imx6: Add DHCOM i.MX6 PDK board support Add support for the DHCOM i.MX6 PDK board. This board has: - FEC ethernet - EHCI USB host - 3x SDMMC Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2017-10-09 19:51:10 +00:00
CONFIG_CMD_CACHE=y
CONFIG_CMD_TIME=y
CONFIG_CMD_EXT4_WRITE=y
ARM: dts: imx: dh-imx6: Import DHCOM iMX6 PDK2 DTs from Linux Import DHCOM iMX6 PDK2 device tree from Linux 5.1.1 b724e9356404 . Enable DT control in full U-Boot . Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Ludwig Zenz <lzenz@dh-electronics.com> Cc: Stefano Babic <sbabic@denx.de>
2019-05-17 14:58:47 +00:00
CONFIG_OF_CONTROL=y
CONFIG_DEFAULT_DEVICE_TREE="imx6q-dhcom-pdk2"
ARM: imx6: DHCOM i.MX6 PDK: config SPL to load U-Boot fitImage with mulitple DTs Configure fitImage for U-Boot with a device tree for imx6 quad/dual and duallite/solo. This enables to support the imx6 derivates quad/dual/duallite/solo with a single binary. Signed-off-by: Ludwig Zenz <lzenz@dh-electronics.com> Reviewed-by: Marek Vasut <marex@denx.de>
2019-07-02 12:49:49 +00:00
CONFIG_OF_LIST="imx6q-dhcom-pdk2 imx6dl-dhcom-pdk2"
CONFIG_MULTI_DTB_FIT=y
ARM: imx6: Add DHCOM i.MX6 PDK board support Add support for the DHCOM i.MX6 PDK board. This board has: - FEC ethernet - EHCI USB host - 3x SDMMC Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2017-10-09 19:51:10 +00:00
CONFIG_ENV_IS_IN_SPI_FLASH=y
defconfigs: Migrate CONFIG_SYS_REDUNDAND_ENVIRONMENT Move this symbol to Kconfig. As part of this we can drop a UBI-specific symbol that was a stop-gap for not having this particular symbol in Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
2019-11-10 16:28:03 +00:00
CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
env: Add CONFIG_SYS_RELOC_GD_ENV_ADDR symbol Today in initr_reloc_global_data() we use some non-obvious tests to determine if we need to relocate the env_addr within gd or not. In order to facilitate migration of other symbols to Kconfig we need to introduce a new symbol for this particular use case. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2019-11-13 03:46:36 +00:00
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
ata: Migrate CONFIG_DWC_AHSATA to Kconfig Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
2017-12-08 13:36:18 +00:00
CONFIG_DWC_AHSATA=y
Convert CONFIG_BOOTCOUNT_LIMIT to Kconfig This converts the following to Kconfig: CONFIG_BOOTCOUNT_LIMIT Signed-off-by: Lukasz Majewski <lukma@denx.de> Tested-by: Alex Kiernan <alex.kiernan@gmail.com> Reviewed-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com> Acked-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com>
2018-02-09 22:50:57 +00:00
CONFIG_BOOTCOUNT_LIMIT=y
ARM: imx6: DHCOM i.MX6 PDK: Switch to DM for I2C This patch enables DM I2C for DHCOM i.MX6 PDK2 boards and removes non DM I2C code. The I2C EEPROM with ethaddr (MAC) is defined in the device tree. Use UCLASS_I2C_EEPROM to find the device by fixed hardware path and read the ethaddr. Tested with DHCOM i.MX6dl and DHCOM i.MX6q. Signed-off-by: Ludwig Zenz <lzenz@dh-electronics.com> Reviewed-by: Marek Vasut <marex@denx.de>
2019-07-08 13:04:58 +00:00
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_MXC=y
CONFIG_MISC=y
CONFIG_I2C_EEPROM=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2019-06-21 14:11:23 +00:00
CONFIG_DM_MMC=y
Convert CONFIG_FSL_USDHC to Kconfig This converts the following to Kconfig: CONFIG_FSL_USDHC Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Add IMX8M, TARGET_S32V234EVB to FSL_USDHC list] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-08-14 12:23:43 +00:00
CONFIG_FSL_USDHC=y
mtd: ensure MTD is compiled when there is a SPI NOR flash using MTD MTD must be enabled when there is a SPI NOR flash using the SPI_FLASH_MTD config entry. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
2019-10-03 17:50:08 +00:00
CONFIG_MTD=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2019-12-04 22:18:38 +00:00
CONFIG_DM_SPI_FLASH=y
Convert CONFIG_SF_DEFAULT_* to Kconfig This converts the following to Kconfig: CONFIG_SF_DEFAULT_BUS CONFIG_SF_DEFAULT_CS CONFIG_SF_DEFAULT_MODE CONFIG_SF_DEFAULT_SPEED I use moveconfig script and then manual check on generated u-boot.cfg to solve the remaining issue. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-02-27 14:20:36 +00:00
CONFIG_SF_DEFAULT_MODE=0
CONFIG_SF_DEFAULT_SPEED=25000000
ARM: imx: dh-imx6: Convert SPI support to DM Enable DM SPI and SF support on DHCOM iMX6 PDK2. Convert board code to match the DM support. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Ludwig Zenz <lzenz@dh-electronics.com> Cc: Stefano Babic <sbabic@denx.de>
2019-05-17 14:58:54 +00:00
CONFIG_SPI_FLASH_SFDP_SUPPORT=y
ARM: dh_imx6: enable GigaDevice, Macronix, and Winbond SPI Flash support in Kconfig In preparation for delivery bottlenecks, enable support for GigaDevice, Macronix, and Winbond nor flash chips. Signed-off-by: Ludwig Zenz <lzenz@dh-electronics.de>
2018-07-06 09:26:03 +00:00
CONFIG_SPI_FLASH_GIGADEVICE=y
CONFIG_SPI_FLASH_MACRONIX=y
ARM: imx6: Add DHCOM i.MX6 PDK board support Add support for the DHCOM i.MX6 PDK board. This board has: - FEC ethernet - EHCI USB host - 3x SDMMC Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2017-10-09 19:51:10 +00:00
CONFIG_SPI_FLASH_SPANSION=y
ARM: dh_imx6: enable GigaDevice, Macronix, and Winbond SPI Flash support in Kconfig In preparation for delivery bottlenecks, enable support for GigaDevice, Macronix, and Winbond nor flash chips. Signed-off-by: Ludwig Zenz <lzenz@dh-electronics.de>
2018-07-06 09:26:03 +00:00
CONFIG_SPI_FLASH_WINBOND=y
ARM: imx: dh-imx6: Convert SPI support to DM Enable DM SPI and SF support on DHCOM iMX6 PDK2. Convert board code to match the DM support. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Ludwig Zenz <lzenz@dh-electronics.com> Cc: Stefano Babic <sbabic@denx.de>
2019-05-17 14:58:54 +00:00
CONFIG_SPI_FLASH_MTD=y
ARM: imx6: Add DHCOM i.MX6 PDK board support Add support for the DHCOM i.MX6 PDK board. This board has: - FEC ethernet - EHCI USB host - 3x SDMMC Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2017-10-09 19:51:10 +00:00
CONFIG_PHYLIB=y
CONFIG_PHY_MICREL=y
CONFIG_PHY_MICREL_KSZ90X1=y
CONFIG_FEC_MXC=y
Convert CONFIG_MII et al to Kconfig This converts the following to Kconfig: CONFIG_MII CONFIG_DRIVER_TI_EMAC Signed-off-by: Adam Ford <aford173@gmail.com> Acked-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-07-21 04:03:57 +00:00
CONFIG_MII=y
ARM: imx: dh-imx6: Enable DM pin control Enable DM pin control support on DHCOM iMX6 PDK2. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Ludwig Zenz <lzenz@dh-electronics.com> Cc: Stefano Babic <sbabic@denx.de>
2019-05-17 14:58:49 +00:00
CONFIG_PINCTRL=y
CONFIG_PINCTRL_IMX6=y
ARM: imx: dh-imx6: Enable DM regulator Enable DM support for regulators and fixed regulator driver and convert USB Vbus control over to the regulators defined in DT. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Ludwig Zenz <lzenz@dh-electronics.com> Cc: Stefano Babic <sbabic@denx.de> Tested-by: Ludwig Zenz <lzenz@dh-electronics.com>
2019-06-20 22:49:47 +00:00
CONFIG_DM_REGULATOR=y
CONFIG_DM_REGULATOR_FIXED=y
ARM: imx: dh-imx6: Convert SATA support to DM Enable DM SATA support on DHCOM iMX6 PDK2. Convert board code to match the DM support. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Ludwig Zenz <lzenz@dh-electronics.com> Cc: Stefano Babic <sbabic@denx.de>
2019-05-17 14:58:52 +00:00
CONFIG_DM_SCSI=y
Convert CONFIG_SPI to Kconfig This converts the following to Kconfig: CONFIG_SPI This partly involves updating code that assumes that CONFIG_SPI implies things that are specific to the MPC8xx SPI driver. For now, just update the CONFIG tests. This also involves reworking the default for CONFIG_SYS_DEF_EEPROM_ADDR so that we don't set it when we cannot make a reasonable default, as it does not cause any compile failures. Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2018-04-15 17:51:26 +00:00
CONFIG_SPI=y
ARM: imx: dh-imx6: Convert SPI support to DM Enable DM SPI and SF support on DHCOM iMX6 PDK2. Convert board code to match the DM support. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Ludwig Zenz <lzenz@dh-electronics.com> Cc: Stefano Babic <sbabic@denx.de>
2019-05-17 14:58:54 +00:00
CONFIG_DM_SPI=y
spi: Migrate CONFIG_MXC_SPI to Kconfig Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com>
2018-02-07 00:42:19 +00:00
CONFIG_MXC_SPI=y
ARM: imx6: DHCOM i.MX6 PDK: Enable sysreset driver and wdt command The SPL does not have DM enabled and therefor still needs to use the hardware watchdog interface provided by the imx-watchdog driver. Fixes: broken reset command after f2929d11a639 ("watchdog: imx: Use immediate reset bits for expire_now") Signed-off-by: Claudius Heine <ch@denx.de>
2019-11-29 07:59:03 +00:00
CONFIG_SYSRESET=y
CONFIG_SYSRESET_WATCHDOG=y
ARM: imx6: Add DHCOM i.MX6 PDK board support Add support for the DHCOM i.MX6 PDK board. This board has: - FEC ethernet - EHCI USB host - 3x SDMMC Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2017-10-09 19:51:10 +00:00
CONFIG_USB=y
ARM: imx: dh-imx6: Convert USB support to DM Enable DM USB host support on DHCOM iMX6 PDK2. Convert board code to match the DM support. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Ludwig Zenz <lzenz@dh-electronics.com> Cc: Stefano Babic <sbabic@denx.de>
2019-05-17 14:58:53 +00:00
CONFIG_DM_USB=y
ARM: imx6: Enable UMS and DFU on DHCOM i.MX6 PDK Enable UMS and DFU, so that the eMMC can be accessed via the USB gadget port on the board. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2017-10-22 08:22:40 +00:00
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_MANUFACTURER="dh"
CONFIG_USB_GADGET_VENDOR_NUM=0x0525
CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
CONFIG_CI_UDC=y
CONFIG_USB_GADGET_DOWNLOAD=y
watchdog: move WATCHDOG_TIMEOUT_MSECS to Kconfig move WATCHDOG_TIMEOUT_MSECS to Kconfig and fix all board defconfigs. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Stefan Roese <sr@denx.de> Acked-by: Lukasz Majewski <lukma@denx.de> Acked-by: Martyn Welch <martyn.welch@collabora.com> Signed-off-by: Stefan Roese <sr@denx.de>
2019-09-30 07:33:43 +00:00
CONFIG_WATCHDOG_TIMEOUT_MSECS=60000
Kconfig: Convert CONFIG_IMX_WATCHDOG to Kconfig Move this option to Kconfig and tidy up the config file of eight boards which use it. Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com>
2018-10-18 09:14:19 +00:00
CONFIG_IMX_WATCHDOG=y
Reference in a new issue Copy permalink