u-boot/doc/device-tree-bindings/spi/spi-mcf-dspi.txt

Freescale ColdFire DSPI controller

Required properties:
- compatible : "fsl,mcf-dspi"
- #address-cells: <1>, as required by generic SPI binding
- #size-cells: <0>, also as required by generic SPI binding
- reg : offset and length of the register set for the device

Optional properties:
- spi-max-frequency : max supported spi frequency
- num-cs : the number of the chipselect signals
- spi-mode: spi motorola mode, 0 to 3
- ctar-params: CTAR0 to 7 register configuration, as an array
  of 8 integer fields for each register, where each register
  is defined as: <fmsz, pcssck, pasc, pdt, cssck, asc, dt, br>.
- fsl,spi-cs-sck-delay: a delay in nanoseconds between activating chip
  select and the start of clock signal, at the start of a transfer.
- fsl,spi-sck-cs-delay: a delay in nanoseconds between stopping the clock
  signal and deactivating chip select, at the end of a transfer.

Example:

dspi0: dspi@fc05c000 {
	compatible = "fsl,mcf-dspi";
	#address-cells = <1>;
	#size-cells = <0>;
	reg = <0xfc05c000 0x100>;
	spi-max-frequency = <50000000>;
	num-cs = <4>;
	spi-mode = <0>;
	ctar-fields = <7, 0, 0, 0, 0, 0, 1, 6>,
		      <7, 0, 0, 0, 0, 0, 1, 6>,
		      <7, 0, 0, 0, 0, 0, 1, 6>;
};