mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-25 04:23:46 +00:00
48 lines
1.4 KiB
ReStructuredText
48 lines
1.4 KiB
ReStructuredText
|
.. SPDX-License-Identifier: GPL-2.0+
|
||
|
|
|
||
|
|
U-Boot for Anbernic RGxx3 Devices
|
||
|
|
=================================
|
||
|
|
|
||
|
|
This allows U-Boot to boot the following Anbernic devices:
|
||
|
|
|
||
|
|
- Anbernic RG353M
|
||
|
|
- Anbernic RG353P
|
||
|
|
- Anbernic RG353V
|
||
|
|
- Anbernic RG353VS
|
||
|
|
- Anbernic RG503
|
||
|
|
|
||
|
|
The correct device is detected automatically by comparing ADC values
|
||
|
|
from ADC channel 1. In the event of an RG353V, an attempt is then made
|
||
|
|
to probe for an eMMC and if it fails the device is assumed to be an
|
||
|
|
RG353VS. Based on the detected device, the environment variables
|
||
|
|
"board", "board_name", and "fdtfile" are set to the correct values
|
||
|
|
corresponding to the board which can be read by a boot script to boot
|
||
|
|
with the correct device tree.
|
||
|
|
|
||
|
|
Please note that there are some versions of the RG353 devices with
|
||
|
|
different panels. Panel auto-detection is planned for a later date.
|
||
|
|
|
||
|
|
Building U-Boot
|
||
|
|
---------------
|
||
|
|
|
||
|
|
.. code-block:: bash
|
||
|
|
|
||
|
|
$ export CROSS_COMPILE=aarch64-none-elf-
|
||
|
|
$ export BL31=../rkbin/bin/rk35/rk3568_bl31_v1.34.elf
|
||
|
|
$ export ROCKCHIP_TPL=../rkbin/bin/rk35/rk3568_ddr_1056MHz_v1.13.bin
|
||
|
|
$ make anbernic-rgxx3_defconfig
|
||
|
|
$ make
|
||
|
|
|
||
|
|
This will build ``u-boot-rockchip.bin`` which can be written to an SD
|
||
|
|
card.
|
||
|
|
|
||
|
|
Image installation
|
||
|
|
------------------
|
||
|
|
|
||
|
|
Write the ``u-boot-rockchip.bin`` to an SD card offset 32kb from the
|
||
|
|
start.
|
||
|
|
|
||
|
|
.. code-block:: bash
|
||
|
|
|
||
|
|
$ dd if=u-boot-rockchip.bin of=/dev/mmcblk0 bs=512 seek=64
|