u-boot/board/isee/igep003x/board.h

/* SPDX-License-Identifier: GPL-2.0+ */
/*
 * IGEP COM AQUILA boards information header
 *
 * Copyright (C) 2013, ISEE 2007 SL - http://www.isee.biz/
 */

#ifndef _BOARD_H_
#define _BOARD_H_

/*
 * We must be able to enable uart0, for initial output. We then have a
 * main pinmux function that can be overridden to enable all other pinmux that
 * is required on the board.
 */
void enable_uart0_pin_mux(void);
void enable_board_pin_mux(void);
#endif
SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com> 2018-05-06 21:58:06 +00:00			`/* SPDX-License-Identifier: GPL-2.0+ */`
ARM: Add support for IGEP COM AQUILA/CYGNUS The IGEP COM AQUILA and CYGNUS are industrial processors modules with following highlights: o AM3352/AM3354 Texas Instruments processor o Cortex-A8 ARM CPU o 3.3 volts Inputs / Outputs use industrial o 256 MB DDR3 SDRAM / 128 Megabytes FLASH o MicroSD card reader on-board o Ethernet controller on-board o JTAG debug connector available o Designed for industrial range purposes Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com> 2013-04-04 22:27:58 +00:00			`/*`
ARM: IGEP0033: Remove CYGNUS name from header. We will not use CYGNUS names for any IGEP COM based on AM335x processor, so, to avoid confusion, remove from headers. Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com> Reviewed-by: Javier Martinez Canillas <javier@dowhile0.org> 2013-07-25 07:27:38 +00:00			`* IGEP COM AQUILA boards information header`
ARM: Add support for IGEP COM AQUILA/CYGNUS The IGEP COM AQUILA and CYGNUS are industrial processors modules with following highlights: o AM3352/AM3354 Texas Instruments processor o Cortex-A8 ARM CPU o 3.3 volts Inputs / Outputs use industrial o 256 MB DDR3 SDRAM / 128 Megabytes FLASH o MicroSD card reader on-board o Ethernet controller on-board o JTAG debug connector available o Designed for industrial range purposes Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com> 2013-04-04 22:27:58 +00:00			`*`
			`* Copyright (C) 2013, ISEE 2007 SL - http://www.isee.biz/`
			`*/`

			`#ifndef _BOARD_H_`
			`#define _BOARD_H_`

			`/*`
			`* We must be able to enable uart0, for initial output. We then have a`
			`* main pinmux function that can be overridden to enable all other pinmux that`
			`* is required on the board.`
			`*/`
			`void enable_uart0_pin_mux(void);`
			`void enable_board_pin_mux(void);`
			`#endif`