mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-07 05:34:28 +00:00
74 lines
2.3 KiB
Text
74 lines
2.3 KiB
Text
|
* Synopsys DesignWare I2C
|
||
|
|
|
||
|
|
Required properties :
|
||
|
|
|
||
|
|
- compatible : should be "snps,designware-i2c"
|
||
|
|
or "mscc,ocelot-i2c" with "snps,designware-i2c" for fallback
|
||
|
|
- reg : Offset and length of the register set for the device
|
||
|
|
- interrupts : <IRQ> where IRQ is the interrupt number.
|
||
|
|
- clocks : phandles for the clocks, see the description of clock-names below.
|
||
|
|
The phandle for the "ic_clk" clock is required. The phandle for the "pclk"
|
||
|
|
clock is optional. If a single clock is specified but no clock-name, it is
|
||
|
|
the "ic_clk" clock. If both clocks are listed, the "ic_clk" must be first.
|
||
|
|
|
||
|
|
Recommended properties :
|
||
|
|
|
||
|
|
- clock-frequency : desired I2C bus clock frequency in Hz.
|
||
|
|
|
||
|
|
Optional properties :
|
||
|
|
|
||
|
|
- clock-names : Contains the names of the clocks:
|
||
|
|
"ic_clk", for the core clock used to generate the external I2C clock.
|
||
|
|
"pclk", the interface clock, required for register access.
|
||
|
|
|
||
|
|
- reg : for "mscc,ocelot-i2c", a second register set to configure the SDA hold
|
||
|
|
time, named ICPU_CFG:TWI_DELAY in the datasheet.
|
||
|
|
|
||
|
|
- i2c-sda-hold-time-ns : should contain the SDA hold time in nanoseconds.
|
||
|
|
This option is only supported in hardware blocks version 1.11a or newer and
|
||
|
|
on Microsemi SoCs ("mscc,ocelot-i2c" compatible).
|
||
|
|
|
||
|
|
- i2c-scl-falling-time-ns : should contain the SCL falling time in nanoseconds.
|
||
|
|
This value which is by default 300ns is used to compute the tLOW period.
|
||
|
|
|
||
|
|
- i2c-sda-falling-time-ns : should contain the SDA falling time in nanoseconds.
|
||
|
|
This value which is by default 300ns is used to compute the tHIGH period.
|
||
|
|
|
||
|
|
Examples :
|
||
|
|
|
||
|
|
i2c@f0000 {
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
compatible = "snps,designware-i2c";
|
||
|
|
reg = <0xf0000 0x1000>;
|
||
|
|
interrupts = <11>;
|
||
|
|
clock-frequency = <400000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
i2c@1120000 {
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
compatible = "snps,designware-i2c";
|
||
|
|
reg = <0x1120000 0x1000>;
|
||
|
|
interrupt-parent = <&ictl>;
|
||
|
|
interrupts = <12 1>;
|
||
|
|
clock-frequency = <400000>;
|
||
|
|
i2c-sda-hold-time-ns = <300>;
|
||
|
|
i2c-sda-falling-time-ns = <300>;
|
||
|
|
i2c-scl-falling-time-ns = <300>;
|
||
|
|
};x
|
||
|
|
|
||
|
|
i2c@1120000 {
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
reg = <0x2000 0x100>;
|
||
|
|
clock-frequency = <400000>;
|
||
|
|
clocks = <&i2cclk>;
|
||
|
|
interrupts = <0>;
|
||
|
|
|
||
|
|
eeprom@64 {
|
||
|
|
compatible = "linux,slave-24c02";
|
||
|
|
reg = <0x40000064>;
|
||
|
|
};
|
||
|
|
};
|