u-boot/drivers/firmware/scmi/sandbox-scmi_agent.c

304 lines
7.8 KiB
C
Raw Normal View History

firmware: add SCMI agent uclass This change introduces SCMI agent uclass to interact with a firmware using the SCMI protocols [1]. SCMI agent uclass currently supports a single method to request processing of the SCMI message by an identified server. A SCMI message is made of a byte payload associated to a protocol ID and a message ID, all defined by the SCMI specification [1]. On return from process_msg() method, the caller gets the service response. SCMI agent uclass defines a post bind generic sequence for all devices. The sequence binds all the SCMI protocols listed in the FDT for that SCMI agent device. Currently none, but later change will introduce protocols. This change implements a simple sandbox device for the SCMI agent uclass. The sandbox nicely answers SCMI_NOT_SUPPORTED to SCMI messages. To prepare for further test support, the sandbox exposes a architecture function for test application to read the sandbox emulated devices state. Currently supports 2 SCMI agents, identified by an ID in the FDT device name. The simplistic DM test does nothing yet. SCMI agent uclass is designed for platforms that embed a SCMI server in a firmware hosted somewhere, for example in a companion co-processor or in the secure world of the executing processor. SCMI protocols allow an SCMI agent to discover and access external resources as clock, reset controllers and more. SCMI agent and server communicate following the SCMI specification [1]. This SCMI agent implementation complies with the DT bindings defined in the Linux kernel source tree regarding SCMI agent description since v5.8. Links: [1] https://developer.arm.com/architectures/system-architectures/software-standards/scmi Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> Cc: Simon Glass <sjg@chromium.org> Cc: Peng Fan <peng.fan@nxp.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-09-09 16:44:00 +00:00
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2020, Linaro Limited
*/
#include <common.h>
#include <dm.h>
#include <malloc.h>
#include <scmi_agent.h>
#include <scmi_agent-uclass.h>
#include <scmi_protocols.h>
#include <asm/io.h>
#include <asm/scmi_test.h>
#include <dm/device_compat.h>
/*
* The sandbox SCMI agent driver simulates to some extend a SCMI message
* processing. It simulates few of the SCMI services for some of the
* SCMI protocols embedded in U-Boot. Currently:
* - SCMI clock protocol: emulate 2 agents each exposing few clocks
firmware: add SCMI agent uclass This change introduces SCMI agent uclass to interact with a firmware using the SCMI protocols [1]. SCMI agent uclass currently supports a single method to request processing of the SCMI message by an identified server. A SCMI message is made of a byte payload associated to a protocol ID and a message ID, all defined by the SCMI specification [1]. On return from process_msg() method, the caller gets the service response. SCMI agent uclass defines a post bind generic sequence for all devices. The sequence binds all the SCMI protocols listed in the FDT for that SCMI agent device. Currently none, but later change will introduce protocols. This change implements a simple sandbox device for the SCMI agent uclass. The sandbox nicely answers SCMI_NOT_SUPPORTED to SCMI messages. To prepare for further test support, the sandbox exposes a architecture function for test application to read the sandbox emulated devices state. Currently supports 2 SCMI agents, identified by an ID in the FDT device name. The simplistic DM test does nothing yet. SCMI agent uclass is designed for platforms that embed a SCMI server in a firmware hosted somewhere, for example in a companion co-processor or in the secure world of the executing processor. SCMI protocols allow an SCMI agent to discover and access external resources as clock, reset controllers and more. SCMI agent and server communicate following the SCMI specification [1]. This SCMI agent implementation complies with the DT bindings defined in the Linux kernel source tree regarding SCMI agent description since v5.8. Links: [1] https://developer.arm.com/architectures/system-architectures/software-standards/scmi Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> Cc: Simon Glass <sjg@chromium.org> Cc: Peng Fan <peng.fan@nxp.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-09-09 16:44:00 +00:00
*
* Agent #0 simulates 2 clocks.
* See IDs in scmi0_clk[] and "sandbox-scmi-agent@0" in test.dts.
*
* Agent #1 simulates 1 clock.
* See IDs in scmi1_clk[] and "sandbox-scmi-agent@1" in test.dts.
*
* All clocks are default disabled.
firmware: add SCMI agent uclass This change introduces SCMI agent uclass to interact with a firmware using the SCMI protocols [1]. SCMI agent uclass currently supports a single method to request processing of the SCMI message by an identified server. A SCMI message is made of a byte payload associated to a protocol ID and a message ID, all defined by the SCMI specification [1]. On return from process_msg() method, the caller gets the service response. SCMI agent uclass defines a post bind generic sequence for all devices. The sequence binds all the SCMI protocols listed in the FDT for that SCMI agent device. Currently none, but later change will introduce protocols. This change implements a simple sandbox device for the SCMI agent uclass. The sandbox nicely answers SCMI_NOT_SUPPORTED to SCMI messages. To prepare for further test support, the sandbox exposes a architecture function for test application to read the sandbox emulated devices state. Currently supports 2 SCMI agents, identified by an ID in the FDT device name. The simplistic DM test does nothing yet. SCMI agent uclass is designed for platforms that embed a SCMI server in a firmware hosted somewhere, for example in a companion co-processor or in the secure world of the executing processor. SCMI protocols allow an SCMI agent to discover and access external resources as clock, reset controllers and more. SCMI agent and server communicate following the SCMI specification [1]. This SCMI agent implementation complies with the DT bindings defined in the Linux kernel source tree regarding SCMI agent description since v5.8. Links: [1] https://developer.arm.com/architectures/system-architectures/software-standards/scmi Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> Cc: Simon Glass <sjg@chromium.org> Cc: Peng Fan <peng.fan@nxp.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-09-09 16:44:00 +00:00
*
* This Driver exports sandbox_scmi_service_ct() for the test sequence to
* get the state of the simulated services (clock state, rate, ...) and
* check back-end device state reflects the request send through the
* various uclass devices, currently only clock controllers.
firmware: add SCMI agent uclass This change introduces SCMI agent uclass to interact with a firmware using the SCMI protocols [1]. SCMI agent uclass currently supports a single method to request processing of the SCMI message by an identified server. A SCMI message is made of a byte payload associated to a protocol ID and a message ID, all defined by the SCMI specification [1]. On return from process_msg() method, the caller gets the service response. SCMI agent uclass defines a post bind generic sequence for all devices. The sequence binds all the SCMI protocols listed in the FDT for that SCMI agent device. Currently none, but later change will introduce protocols. This change implements a simple sandbox device for the SCMI agent uclass. The sandbox nicely answers SCMI_NOT_SUPPORTED to SCMI messages. To prepare for further test support, the sandbox exposes a architecture function for test application to read the sandbox emulated devices state. Currently supports 2 SCMI agents, identified by an ID in the FDT device name. The simplistic DM test does nothing yet. SCMI agent uclass is designed for platforms that embed a SCMI server in a firmware hosted somewhere, for example in a companion co-processor or in the secure world of the executing processor. SCMI protocols allow an SCMI agent to discover and access external resources as clock, reset controllers and more. SCMI agent and server communicate following the SCMI specification [1]. This SCMI agent implementation complies with the DT bindings defined in the Linux kernel source tree regarding SCMI agent description since v5.8. Links: [1] https://developer.arm.com/architectures/system-architectures/software-standards/scmi Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> Cc: Simon Glass <sjg@chromium.org> Cc: Peng Fan <peng.fan@nxp.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-09-09 16:44:00 +00:00
*/
#define SANDBOX_SCMI_AGENT_COUNT 2
static struct sandbox_scmi_clk scmi0_clk[] = {
{ .id = 7, .rate = 1000 },
{ .id = 3, .rate = 333 },
};
static struct sandbox_scmi_clk scmi1_clk[] = {
{ .id = 1, .rate = 44 },
};
firmware: add SCMI agent uclass This change introduces SCMI agent uclass to interact with a firmware using the SCMI protocols [1]. SCMI agent uclass currently supports a single method to request processing of the SCMI message by an identified server. A SCMI message is made of a byte payload associated to a protocol ID and a message ID, all defined by the SCMI specification [1]. On return from process_msg() method, the caller gets the service response. SCMI agent uclass defines a post bind generic sequence for all devices. The sequence binds all the SCMI protocols listed in the FDT for that SCMI agent device. Currently none, but later change will introduce protocols. This change implements a simple sandbox device for the SCMI agent uclass. The sandbox nicely answers SCMI_NOT_SUPPORTED to SCMI messages. To prepare for further test support, the sandbox exposes a architecture function for test application to read the sandbox emulated devices state. Currently supports 2 SCMI agents, identified by an ID in the FDT device name. The simplistic DM test does nothing yet. SCMI agent uclass is designed for platforms that embed a SCMI server in a firmware hosted somewhere, for example in a companion co-processor or in the secure world of the executing processor. SCMI protocols allow an SCMI agent to discover and access external resources as clock, reset controllers and more. SCMI agent and server communicate following the SCMI specification [1]. This SCMI agent implementation complies with the DT bindings defined in the Linux kernel source tree regarding SCMI agent description since v5.8. Links: [1] https://developer.arm.com/architectures/system-architectures/software-standards/scmi Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> Cc: Simon Glass <sjg@chromium.org> Cc: Peng Fan <peng.fan@nxp.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-09-09 16:44:00 +00:00
/* The list saves to simulted end devices references for test purpose */
struct sandbox_scmi_agent *sandbox_scmi_agent_list[SANDBOX_SCMI_AGENT_COUNT];
static struct sandbox_scmi_service sandbox_scmi_service_state = {
.agent = sandbox_scmi_agent_list,
.agent_count = SANDBOX_SCMI_AGENT_COUNT,
};
struct sandbox_scmi_service *sandbox_scmi_service_ctx(void)
{
return &sandbox_scmi_service_state;
}
static void debug_print_agent_state(struct udevice *dev, char *str)
{
struct sandbox_scmi_agent *agent = dev_get_priv(dev);
dev_dbg(dev, "Dump sandbox_scmi_agent %u: %s\n", agent->idx, str);
dev_dbg(dev, " scmi%u_clk (%zu): %d/%ld, %d/%ld, %d/%ld, ...\n",
agent->idx,
agent->clk_count,
agent->clk_count ? agent->clk[0].enabled : -1,
agent->clk_count ? agent->clk[0].rate : -1,
agent->clk_count > 1 ? agent->clk[1].enabled : -1,
agent->clk_count > 1 ? agent->clk[1].rate : -1,
agent->clk_count > 2 ? agent->clk[2].enabled : -1,
agent->clk_count > 2 ? agent->clk[2].rate : -1);
firmware: add SCMI agent uclass This change introduces SCMI agent uclass to interact with a firmware using the SCMI protocols [1]. SCMI agent uclass currently supports a single method to request processing of the SCMI message by an identified server. A SCMI message is made of a byte payload associated to a protocol ID and a message ID, all defined by the SCMI specification [1]. On return from process_msg() method, the caller gets the service response. SCMI agent uclass defines a post bind generic sequence for all devices. The sequence binds all the SCMI protocols listed in the FDT for that SCMI agent device. Currently none, but later change will introduce protocols. This change implements a simple sandbox device for the SCMI agent uclass. The sandbox nicely answers SCMI_NOT_SUPPORTED to SCMI messages. To prepare for further test support, the sandbox exposes a architecture function for test application to read the sandbox emulated devices state. Currently supports 2 SCMI agents, identified by an ID in the FDT device name. The simplistic DM test does nothing yet. SCMI agent uclass is designed for platforms that embed a SCMI server in a firmware hosted somewhere, for example in a companion co-processor or in the secure world of the executing processor. SCMI protocols allow an SCMI agent to discover and access external resources as clock, reset controllers and more. SCMI agent and server communicate following the SCMI specification [1]. This SCMI agent implementation complies with the DT bindings defined in the Linux kernel source tree regarding SCMI agent description since v5.8. Links: [1] https://developer.arm.com/architectures/system-architectures/software-standards/scmi Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> Cc: Simon Glass <sjg@chromium.org> Cc: Peng Fan <peng.fan@nxp.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-09-09 16:44:00 +00:00
};
static struct sandbox_scmi_clk *get_scmi_clk_state(uint agent_id, uint clock_id)
{
struct sandbox_scmi_clk *target = NULL;
size_t target_count = 0;
size_t n;
switch (agent_id) {
case 0:
target = scmi0_clk;
target_count = ARRAY_SIZE(scmi0_clk);
break;
case 1:
target = scmi1_clk;
target_count = ARRAY_SIZE(scmi1_clk);
break;
default:
return NULL;
}
for (n = 0; n < target_count; n++)
if (target[n].id == clock_id)
return target + n;
return NULL;
}
/*
* Sandbox SCMI agent ops
*/
static int sandbox_scmi_clock_rate_set(struct udevice *dev,
struct scmi_msg *msg)
{
struct sandbox_scmi_agent *agent = dev_get_priv(dev);
struct scmi_clk_rate_set_in *in = NULL;
struct scmi_clk_rate_set_out *out = NULL;
struct sandbox_scmi_clk *clk_state = NULL;
if (!msg->in_msg || msg->in_msg_sz < sizeof(*in) ||
!msg->out_msg || msg->out_msg_sz < sizeof(*out))
return -EINVAL;
in = (struct scmi_clk_rate_set_in *)msg->in_msg;
out = (struct scmi_clk_rate_set_out *)msg->out_msg;
clk_state = get_scmi_clk_state(agent->idx, in->clock_id);
if (!clk_state) {
dev_err(dev, "Unexpected clock ID %u\n", in->clock_id);
out->status = SCMI_NOT_FOUND;
} else {
u64 rate = ((u64)in->rate_msb << 32) + in->rate_lsb;
clk_state->rate = (ulong)rate;
out->status = SCMI_SUCCESS;
}
return 0;
}
static int sandbox_scmi_clock_rate_get(struct udevice *dev,
struct scmi_msg *msg)
{
struct sandbox_scmi_agent *agent = dev_get_priv(dev);
struct scmi_clk_rate_get_in *in = NULL;
struct scmi_clk_rate_get_out *out = NULL;
struct sandbox_scmi_clk *clk_state = NULL;
if (!msg->in_msg || msg->in_msg_sz < sizeof(*in) ||
!msg->out_msg || msg->out_msg_sz < sizeof(*out))
return -EINVAL;
in = (struct scmi_clk_rate_get_in *)msg->in_msg;
out = (struct scmi_clk_rate_get_out *)msg->out_msg;
clk_state = get_scmi_clk_state(agent->idx, in->clock_id);
if (!clk_state) {
dev_err(dev, "Unexpected clock ID %u\n", in->clock_id);
out->status = SCMI_NOT_FOUND;
} else {
out->rate_msb = (u32)((u64)clk_state->rate >> 32);
out->rate_lsb = (u32)clk_state->rate;
out->status = SCMI_SUCCESS;
}
return 0;
}
static int sandbox_scmi_clock_gate(struct udevice *dev, struct scmi_msg *msg)
{
struct sandbox_scmi_agent *agent = dev_get_priv(dev);
struct scmi_clk_state_in *in = NULL;
struct scmi_clk_state_out *out = NULL;
struct sandbox_scmi_clk *clk_state = NULL;
if (!msg->in_msg || msg->in_msg_sz < sizeof(*in) ||
!msg->out_msg || msg->out_msg_sz < sizeof(*out))
return -EINVAL;
in = (struct scmi_clk_state_in *)msg->in_msg;
out = (struct scmi_clk_state_out *)msg->out_msg;
clk_state = get_scmi_clk_state(agent->idx, in->clock_id);
if (!clk_state) {
dev_err(dev, "Unexpected clock ID %u\n", in->clock_id);
out->status = SCMI_NOT_FOUND;
} else if (in->attributes > 1) {
out->status = SCMI_PROTOCOL_ERROR;
} else {
clk_state->enabled = in->attributes;
out->status = SCMI_SUCCESS;
}
return 0;
}
firmware: add SCMI agent uclass This change introduces SCMI agent uclass to interact with a firmware using the SCMI protocols [1]. SCMI agent uclass currently supports a single method to request processing of the SCMI message by an identified server. A SCMI message is made of a byte payload associated to a protocol ID and a message ID, all defined by the SCMI specification [1]. On return from process_msg() method, the caller gets the service response. SCMI agent uclass defines a post bind generic sequence for all devices. The sequence binds all the SCMI protocols listed in the FDT for that SCMI agent device. Currently none, but later change will introduce protocols. This change implements a simple sandbox device for the SCMI agent uclass. The sandbox nicely answers SCMI_NOT_SUPPORTED to SCMI messages. To prepare for further test support, the sandbox exposes a architecture function for test application to read the sandbox emulated devices state. Currently supports 2 SCMI agents, identified by an ID in the FDT device name. The simplistic DM test does nothing yet. SCMI agent uclass is designed for platforms that embed a SCMI server in a firmware hosted somewhere, for example in a companion co-processor or in the secure world of the executing processor. SCMI protocols allow an SCMI agent to discover and access external resources as clock, reset controllers and more. SCMI agent and server communicate following the SCMI specification [1]. This SCMI agent implementation complies with the DT bindings defined in the Linux kernel source tree regarding SCMI agent description since v5.8. Links: [1] https://developer.arm.com/architectures/system-architectures/software-standards/scmi Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> Cc: Simon Glass <sjg@chromium.org> Cc: Peng Fan <peng.fan@nxp.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-09-09 16:44:00 +00:00
static int sandbox_scmi_test_process_msg(struct udevice *dev,
struct scmi_msg *msg)
{
switch (msg->protocol_id) {
case SCMI_PROTOCOL_ID_CLOCK:
switch (msg->message_id) {
case SCMI_CLOCK_RATE_SET:
return sandbox_scmi_clock_rate_set(dev, msg);
case SCMI_CLOCK_RATE_GET:
return sandbox_scmi_clock_rate_get(dev, msg);
case SCMI_CLOCK_CONFIG_SET:
return sandbox_scmi_clock_gate(dev, msg);
default:
break;
}
break;
firmware: add SCMI agent uclass This change introduces SCMI agent uclass to interact with a firmware using the SCMI protocols [1]. SCMI agent uclass currently supports a single method to request processing of the SCMI message by an identified server. A SCMI message is made of a byte payload associated to a protocol ID and a message ID, all defined by the SCMI specification [1]. On return from process_msg() method, the caller gets the service response. SCMI agent uclass defines a post bind generic sequence for all devices. The sequence binds all the SCMI protocols listed in the FDT for that SCMI agent device. Currently none, but later change will introduce protocols. This change implements a simple sandbox device for the SCMI agent uclass. The sandbox nicely answers SCMI_NOT_SUPPORTED to SCMI messages. To prepare for further test support, the sandbox exposes a architecture function for test application to read the sandbox emulated devices state. Currently supports 2 SCMI agents, identified by an ID in the FDT device name. The simplistic DM test does nothing yet. SCMI agent uclass is designed for platforms that embed a SCMI server in a firmware hosted somewhere, for example in a companion co-processor or in the secure world of the executing processor. SCMI protocols allow an SCMI agent to discover and access external resources as clock, reset controllers and more. SCMI agent and server communicate following the SCMI specification [1]. This SCMI agent implementation complies with the DT bindings defined in the Linux kernel source tree regarding SCMI agent description since v5.8. Links: [1] https://developer.arm.com/architectures/system-architectures/software-standards/scmi Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> Cc: Simon Glass <sjg@chromium.org> Cc: Peng Fan <peng.fan@nxp.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-09-09 16:44:00 +00:00
case SCMI_PROTOCOL_ID_BASE:
case SCMI_PROTOCOL_ID_POWER_DOMAIN:
case SCMI_PROTOCOL_ID_SYSTEM:
case SCMI_PROTOCOL_ID_PERF:
case SCMI_PROTOCOL_ID_SENSOR:
case SCMI_PROTOCOL_ID_RESET_DOMAIN:
*(u32 *)msg->out_msg = SCMI_NOT_SUPPORTED;
return 0;
default:
break;
}
dev_err(dev, "%s(%s): Unhandled protocol_id %#x/message_id %#x\n",
__func__, dev->name, msg->protocol_id, msg->message_id);
if (msg->out_msg_sz < sizeof(u32))
return -EINVAL;
/* Intentionnaly report unhandled IDs through the SCMI return code */
*(u32 *)msg->out_msg = SCMI_PROTOCOL_ERROR;
return 0;
}
static int sandbox_scmi_test_remove(struct udevice *dev)
{
struct sandbox_scmi_agent *agent = dev_get_priv(dev);
debug_print_agent_state(dev, "removed");
/* We only need to dereference the agent in the context */
sandbox_scmi_service_ctx()->agent[agent->idx] = NULL;
return 0;
}
static int sandbox_scmi_test_probe(struct udevice *dev)
{
static const char basename[] = "sandbox-scmi-agent@";
struct sandbox_scmi_agent *agent = dev_get_priv(dev);
const size_t basename_size = sizeof(basename) - 1;
if (strncmp(basename, dev->name, basename_size))
return -ENOENT;
switch (dev->name[basename_size]) {
case '0':
*agent = (struct sandbox_scmi_agent){
.idx = 0,
.clk = scmi0_clk,
.clk_count = ARRAY_SIZE(scmi0_clk),
firmware: add SCMI agent uclass This change introduces SCMI agent uclass to interact with a firmware using the SCMI protocols [1]. SCMI agent uclass currently supports a single method to request processing of the SCMI message by an identified server. A SCMI message is made of a byte payload associated to a protocol ID and a message ID, all defined by the SCMI specification [1]. On return from process_msg() method, the caller gets the service response. SCMI agent uclass defines a post bind generic sequence for all devices. The sequence binds all the SCMI protocols listed in the FDT for that SCMI agent device. Currently none, but later change will introduce protocols. This change implements a simple sandbox device for the SCMI agent uclass. The sandbox nicely answers SCMI_NOT_SUPPORTED to SCMI messages. To prepare for further test support, the sandbox exposes a architecture function for test application to read the sandbox emulated devices state. Currently supports 2 SCMI agents, identified by an ID in the FDT device name. The simplistic DM test does nothing yet. SCMI agent uclass is designed for platforms that embed a SCMI server in a firmware hosted somewhere, for example in a companion co-processor or in the secure world of the executing processor. SCMI protocols allow an SCMI agent to discover and access external resources as clock, reset controllers and more. SCMI agent and server communicate following the SCMI specification [1]. This SCMI agent implementation complies with the DT bindings defined in the Linux kernel source tree regarding SCMI agent description since v5.8. Links: [1] https://developer.arm.com/architectures/system-architectures/software-standards/scmi Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> Cc: Simon Glass <sjg@chromium.org> Cc: Peng Fan <peng.fan@nxp.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-09-09 16:44:00 +00:00
};
break;
case '1':
*agent = (struct sandbox_scmi_agent){
.idx = 1,
.clk = scmi1_clk,
.clk_count = ARRAY_SIZE(scmi1_clk),
firmware: add SCMI agent uclass This change introduces SCMI agent uclass to interact with a firmware using the SCMI protocols [1]. SCMI agent uclass currently supports a single method to request processing of the SCMI message by an identified server. A SCMI message is made of a byte payload associated to a protocol ID and a message ID, all defined by the SCMI specification [1]. On return from process_msg() method, the caller gets the service response. SCMI agent uclass defines a post bind generic sequence for all devices. The sequence binds all the SCMI protocols listed in the FDT for that SCMI agent device. Currently none, but later change will introduce protocols. This change implements a simple sandbox device for the SCMI agent uclass. The sandbox nicely answers SCMI_NOT_SUPPORTED to SCMI messages. To prepare for further test support, the sandbox exposes a architecture function for test application to read the sandbox emulated devices state. Currently supports 2 SCMI agents, identified by an ID in the FDT device name. The simplistic DM test does nothing yet. SCMI agent uclass is designed for platforms that embed a SCMI server in a firmware hosted somewhere, for example in a companion co-processor or in the secure world of the executing processor. SCMI protocols allow an SCMI agent to discover and access external resources as clock, reset controllers and more. SCMI agent and server communicate following the SCMI specification [1]. This SCMI agent implementation complies with the DT bindings defined in the Linux kernel source tree regarding SCMI agent description since v5.8. Links: [1] https://developer.arm.com/architectures/system-architectures/software-standards/scmi Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> Cc: Simon Glass <sjg@chromium.org> Cc: Peng Fan <peng.fan@nxp.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-09-09 16:44:00 +00:00
};
break;
default:
dev_err(dev, "%s(): Unexpected agent ID %s\n",
__func__, dev->name + basename_size);
return -ENOENT;
}
debug_print_agent_state(dev, "probed");
/* Save reference for tests purpose */
sandbox_scmi_service_ctx()->agent[agent->idx] = agent;
return 0;
};
static const struct udevice_id sandbox_scmi_test_ids[] = {
{ .compatible = "sandbox,scmi-agent" },
{ }
};
struct scmi_agent_ops sandbox_scmi_test_ops = {
.process_msg = sandbox_scmi_test_process_msg,
};
U_BOOT_DRIVER(sandbox_scmi_agent) = {
.name = "sandbox-scmi_agent",
.id = UCLASS_SCMI_AGENT,
.of_match = sandbox_scmi_test_ids,
.priv_auto_alloc_size = sizeof(struct sandbox_scmi_agent),
.probe = sandbox_scmi_test_probe,
.remove = sandbox_scmi_test_remove,
.ops = &sandbox_scmi_test_ops,
};