u-boot/include/configs/dns325.h

121 lines
2.9 KiB
C
Raw Normal View History

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (C) 2011
* Stefan Herbrechtsmeier <stefan@herbrechtsmeier.net>
*
* Based on Kirkwood support:
* (C) Copyright 2009
* Marvell Semiconductor <www.marvell.com>
* Written-by: Prafulla Wadaskar <prafulla@marvell.com>
*/
#ifndef _CONFIG_DNS325_H
#define _CONFIG_DNS325_H
/*
* Machine number definition
*/
#define CONFIG_MACH_TYPE MACH_TYPE_DNS325
/*
* High Level Configuration Options (easy to change)
*/
#define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */
#define CONFIG_KW88F6281 /* SOC Name */
#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
/*
* Commands configuration
*/
#define CONFIG_NR_DRAM_BANKS 1
/*
* mv-common.h should be defined after CMD configs since it used them
* to enable certain macros
*/
#include "mv-common.h"
/* Remove or override few declarations from mv-common.h */
/*
* Ethernet Driver configuration
*/
#ifdef CONFIG_CMD_NET
#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
#define CONFIG_NETCONSOLE
#endif
/*
* SATA Driver configuration
*/
#ifdef CONFIG_MVSATA_IDE
#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
#define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET
#endif
/*
* Enable GPI0 support
*/
#define CONFIG_KIRKWOOD_GPIO
/*
* Environment variables configurations
*/
#ifdef CONFIG_CMD_NAND
#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128KB */
#endif
#define CONFIG_ENV_SIZE 0x20000 /* 128KB */
#define CONFIG_ENV_ADDR 0xe0000
#define CONFIG_ENV_OFFSET 0xe0000 /* env starts here */
/*
* Default environment variables
*/
#define CONFIG_EXTRA_ENV_SETTINGS \
"stdin=serial\0" \
"stdout=serial\0" \
"stderr=serial\0" \
"loadaddr=0x800000\0" \
"autoload=no\0" \
"console=ttyS0,115200\0" \
"mtdparts="CONFIG_MTDPARTS_DEFAULT \
"optargs=\0" \
"bootenv=uEnv.txt\0" \
"importbootenv=echo Importing environment ...; " \
"env import -t ${loadaddr} ${filesize}\0" \
"loadbootenv=fatload usb 0 ${loadaddr} ${bootenv}\0" \
"setbootargs=setenv bootargs console=${console} " \
"${optargs} " \
"${mtdparts} " \
"root=${bootenvroot} " \
"rootfstype=${bootenvrootfstype}\0" \
"subbootcmd=run setbootargs; " \
"if run bootenvloadimage; then " \
"bootm ${loadaddr};" \
"fi;\0" \
"nandroot=ubi0:rootfs ubi.mtd=rootfs\0" \
"nandrootfstype=ubifs\0" \
"nandloadimage=nand read ${loadaddr} kernel\0" \
"setnandbootenv=echo Booting from nand ...; " \
"setenv bootenvroot ${nandroot}; " \
"setenv bootenvrootfstype ${nandrootfstype}; " \
"setenv bootenvloadimage ${nandloadimage}\0"
#define CONFIG_BOOTCOMMAND \
"if test -n ${bootenv} && usb start; then " \
"if run loadbootenv; then " \
"echo Loaded environment ${bootenv} from usb;" \
"run importbootenv;" \
"fi;" \
"if test -n ${bootenvcmd}; then " \
"echo Running bootenvcmd ...;" \
"run bootenvcmd;" \
"fi;" \
"fi;" \
"run setnandbootenv subbootcmd;"
#endif /* _CONFIG_DNS325_H */