u-boot/arch/arm/dts/r8a7791-porter-u-boot.dts

// SPDX-License-Identifier: GPL-2.0
/*
 * Device Tree Source extras for U-Boot for the Porter board
 *
 * Copyright (C) 2018 Marek Vasut <marek.vasut@gmail.com>
 */

#include "r8a7791-porter.dts"
#include "r8a7791-u-boot.dtsi"

&scif0 {
	u-boot,dm-pre-reloc;
};

&i2c6 {
	status = "okay";
	clock-frequency = <400000>;
};

&qspi {
	flash@0 {
		spi-tx-bus-width = <1>;
		spi-rx-bus-width = <1>;
	};
};
SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com> 2018-05-06 17:58:06 -04:00			`// SPDX-License-Identifier: GPL-2.0`
ARM: dts: rmobile: Add SoC and board U-Boot DT extras Add U-Boot DT extras for each SoC and board. This marks the required nodes with u-boot,dm-pre-reloc to start clock and PRR early on while avoiding modification of the DTs imported from Linux. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> 2018-01-17 22:47:21 +01:00			`/*`
			`* Device Tree Source extras for U-Boot for the Porter board`
			`*`
			`* Copyright (C) 2018 Marek Vasut <marek.vasut@gmail.com>`
			`*/`

			`#include "r8a7791-porter.dts"`
			`#include "r8a7791-u-boot.dtsi"`
ARM: dts: rmobile: Move the u-boot,dm-pre-reloc into u-boot DTS on porter Fix ommission where the u-boot,dm-pre-reloc DT bit was pulled into the common DT, not the U-Boot specific DT part. Move it to U-Boot DT part. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> 2018-02-17 00:31:19 +01:00
			`&scif0 {`
			`u-boot,dm-pre-reloc;`
			`};`
ARM: dts: rmobile: Extract i2c6 on M2W Porter The i2c6 node is missing in mainline Linux thus far, pull it into U-Boot specific DT until it hits mainline Linux, to make syncing of DTs easier. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> --- V2: Rebase on u-boot/master 2018-12-03 21:30:44 +01:00
			`&i2c6 {`
			`status = "okay";`
			`clock-frequency = <400000>;`
			`};`
ARM: dts: rmobile: Force 1-bit bus width on Gen2 QSPI U-Boot currently uses Gen2 QSPI in 1-bit mode, enforce it until we can do better using the new SPI NOR framework. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> 2019-02-19 05:58:24 +01:00
			`&qspi {`
			`flash@0 {`
			`spi-tx-bus-width = <1>;`
			`spi-rx-bus-width = <1>;`
			`};`
			`};`