Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-14 17:07:38 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/arch/arc/include/asm/cache.h

43 lines
1 KiB
C
Raw Normal View History

SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-06 21:58:06 +00:00
/* SPDX-License-Identifier: GPL-2.0+ */
arc: add architecture header files These are header files used by ARC700 architecture. Also note that "arch-arc700/hardware.h" is only required for compilation of "designware_i2c" driver which refers to "asm/arch/hardware.h". It would be good to fix mentioned driver sometime soon but it will cause changes in ARM board configs that use "designware_i2c". Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Francois Bedard <fbedard@synopsys.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Heiko Schocher <hs@denx.de>
2014-02-04 08:56:13 +00:00
/*
* Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved.
*/
#ifndef __ASM_ARC_CACHE_H
#define __ASM_ARC_CACHE_H
#include <config.h>
arc: cache - accommodate different L1 cache line lengths ARC core could be configured with different L1 and L2 (AKA SLC) cache line lengths. At least these values are possible and were really used: 32, 64 or 128 bytes. Current implementation requires cache line to be selected upon U-Boot configuration and then it will only work on matching hardware. Indeed this is quite efficient because cache line length gets hardcoded during code compilation. But OTOH it makes binary less portable. With this commit we allow U-Boot to determine real L1 cache line length early in runtime and use this value later on. This extends portability of U-Boot binary a lot. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2015-12-14 14:14:46 +00:00
/*
* As of today we may handle any L1 cache line length right in software.
* For that essentially cache line length is a variable not constant.
* And to satisfy users of ARCH_DMA_MINALIGN we just use largest line length
* that may exist in either L1 or L2 (AKA SLC) caches on ARC.
*/
#define ARCH_DMA_MINALIGN 128
arc: add architecture header files These are header files used by ARC700 architecture. Also note that "arch-arc700/hardware.h" is only required for compilation of "designware_i2c" driver which refers to "asm/arch/hardware.h". It would be good to fix mentioned driver sometime soon but it will cause changes in ARM board configs that use "designware_i2c". Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Francois Bedard <fbedard@synopsys.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Heiko Schocher <hs@denx.de>
2014-02-04 08:56:13 +00:00
arc: introduce U-Boot port for ARCv2 ISA ARC HS and ARC EM are new cores based on ARCv2 ISA which is binary incompatible with ISAv1 (AKA ARCompact). Significant difference between ISAv2 and v1 is implementation of interrupt vector table. In v1 it is implemented in the same way as on many other architectures - as a special location where user may put whether code executed in place (if machine word of space is enough) or jump to a full-scale interrupt handler. In v2 interrupt table is just an array of adresses of real interrupt handlers. That requires a separate section for IVT that is not encoded as code by assembler. This change adds support for following cores: * ARC EM6 (simple 32-bit microcontroller without MMU) * ARC HS36 (advanced 32-bit microcontroller without MMU) * ARC HS38 (advanced 32-bit microcontroller with MMU) As a part of ARC HS38 new version of MMU (v4) was introduced. Also this change adds AXS131 board which is the same DW ARC SDP base board but with ARC HS38 CPU tile. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2015-01-13 15:35:46 +00:00
#if defined(ARC_MMU_ABSENT)
#define CONFIG_ARC_MMU_VER 0
#elif defined(CONFIG_ARC_MMU_V2)
arc: add more flavours of ARC700 series CPU Now we may select a particular version of ARC700: * ARC750D or * ARC770D It allows more flexible (or more fine tuned) configuration of U-Boot. Before that change we relied on minimal configuration but now we may use specific features of each CPU. Moreover allows us to escape manual selection of options that exist in both CPUs but may have say different version like MMUv2 in ARC750D vs MMUv3 in ARC770D. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2015-02-03 10:58:11 +00:00
#define CONFIG_ARC_MMU_VER 2
#elif defined(CONFIG_ARC_MMU_V3)
#define CONFIG_ARC_MMU_VER 3
arc: introduce U-Boot port for ARCv2 ISA ARC HS and ARC EM are new cores based on ARCv2 ISA which is binary incompatible with ISAv1 (AKA ARCompact). Significant difference between ISAv2 and v1 is implementation of interrupt vector table. In v1 it is implemented in the same way as on many other architectures - as a special location where user may put whether code executed in place (if machine word of space is enough) or jump to a full-scale interrupt handler. In v2 interrupt table is just an array of adresses of real interrupt handlers. That requires a separate section for IVT that is not encoded as code by assembler. This change adds support for following cores: * ARC EM6 (simple 32-bit microcontroller without MMU) * ARC HS36 (advanced 32-bit microcontroller without MMU) * ARC HS38 (advanced 32-bit microcontroller with MMU) As a part of ARC HS38 new version of MMU (v4) was introduced. Also this change adds AXS131 board which is the same DW ARC SDP base board but with ARC HS38 CPU tile. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2015-01-13 15:35:46 +00:00
#elif defined(CONFIG_ARC_MMU_V4)
#define CONFIG_ARC_MMU_VER 4
arc: add more flavours of ARC700 series CPU Now we may select a particular version of ARC700: * ARC750D or * ARC770D It allows more flexible (or more fine tuned) configuration of U-Boot. Before that change we relied on minimal configuration but now we may use specific features of each CPU. Moreover allows us to escape manual selection of options that exist in both CPUs but may have say different version like MMUv2 in ARC750D vs MMUv3 in ARC770D. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2015-02-03 10:58:11 +00:00
#endif
arc: add support for SLC (System Level Cache, AKA L2-cache) ARCv2 cores may have built-in SLC (System Level Cache, AKA L2-cache). This change adds functions required for controlling SLC: * slc_enable/disable * slc_flush/invalidate For now we just disable SLC to escape DMA coherency issues until either: * SLC flush/invalidate is supported in DMA APIin U-Boot * hardware DMA coherency is implemented (that might be board specific so probably we'll need to have a separate Kconfig option for controlling SLC explicitly) Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2015-03-30 10:36:04 +00:00
#ifndef __ASSEMBLY__
arc: significant cache rework [1] Align cache management functions to those in Linux kernel. I.e.: a) Use the same functions for all cache ops (D$ Inv/Flush) b) Split cache ops in 3 sub-functions: "before", "lineloop" and "after". That way we may re-use "before" and "after" functions for region and full cache ops. [2] Implement full-functional L2 (SLC) management. Before SLC was simply disabled early on boot. It's also possible to enable or disable L2 cache from config utility. [3] Disable/enable corresponding caches early on boot. So if U-Boot is configured to use caches they will be used at all times (this is useful in partucular for speed-up of relocation). Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2015-05-18 13:56:26 +00:00
void cache_init(void);
ARC: Flush & invalidate D$ with a single command We don't implement separate flush_dcache_all() intentionally as entire data cache invalidation is dangerous operation even if we flush data cache right before invalidation. There is the real example: We may get stuck in the following code if we store any context (like BLINK register) on stack in invalidate_dcache_all() function. BLINK register is the register where return address is automatically saved when we do function call with instructions like 'bl'. void flush_dcache_all() { __dc_entire_op(OP_FLUSH); // Other code // } void invalidate_dcache_all() { __dc_entire_op(OP_INV); // Other code // } void foo(void) { flush_dcache_all(); invalidate_dcache_all(); } Now let's see what really happens during that code execution: foo() |->> call flush_dcache_all [return address is saved to BLINK register] [push BLINK] (save to stack) ![point 1] |->> call __dc_entire_op(OP_FLUSH) [return address is saved to BLINK register] [flush L1 D$] return [jump to BLINK] <<------ [other flush_dcache_all code] [pop BLINK] (get from stack) return [jump to BLINK] <<------ |->> call invalidate_dcache_all [return address is saved to BLINK register] [push BLINK] (save to stack) ![point 2] |->> call __dc_entire_op(OP_FLUSH) [return address is saved to BLINK register] [invalidate L1 D$] ![point 3] // Oops!!! // We lose return address from invalidate_dcache_all function: // we save it to stack and invalidate L1 D$ after that! return [jump to BLINK] <<------ [other invalidate_dcache_all code] [pop BLINK] (get from stack) // we don't have this data in L1 dcache as we invalidated it in [point 3] // so we get it from next memory level (for example DDR memory) // but in the memory we have value which we save in [point 1], which // is return address from flush_dcache_all function (instead of // address from current invalidate_dcache_all function which we // saved in [point 2] !) return [jump to BLINK] <<------ // As BLINK points to invalidate_dcache_all, we call it again and // loop forever. Fortunately we may do flush and invalidation of D$ with a single one instruction which automatically mitigates a situation described above. And because invalidate_dcache_all() isn't used in common U-Boot code we implement "flush and invalidate dcache all" instead. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-03-21 12:58:50 +00:00
void flush_n_invalidate_dcache_all(void);
ARC: Implement a function to sync and cleanup caches Implement specialized function to clenup caches (and therefore sync instruction and data caches) which can be used for cleanup before linux launch or to sync caches during U-Boot self-relocation. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-03-21 12:59:02 +00:00
void sync_n_cleanup_cache_all(void);
arc: add support for SLC (System Level Cache, AKA L2-cache) ARCv2 cores may have built-in SLC (System Level Cache, AKA L2-cache). This change adds functions required for controlling SLC: * slc_enable/disable * slc_flush/invalidate For now we just disable SLC to escape DMA coherency issues until either: * SLC flush/invalidate is supported in DMA APIin U-Boot * hardware DMA coherency is implemented (that might be board specific so probably we'll need to have a separate Kconfig option for controlling SLC explicitly) Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2015-03-30 10:36:04 +00:00
ARC: Move IOC enabling to compile-time options Use CONFIG_ARC_DBG_IOC_ENABLE Kconfig option instead of ioc_enable global variable. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-03-21 12:58:59 +00:00
static const inline int is_ioc_enabled(void)
{
return IS_ENABLED(CONFIG_ARC_DBG_IOC_ENABLE);
}
arc: add support for SLC (System Level Cache, AKA L2-cache) ARCv2 cores may have built-in SLC (System Level Cache, AKA L2-cache). This change adds functions required for controlling SLC: * slc_enable/disable * slc_flush/invalidate For now we just disable SLC to escape DMA coherency issues until either: * SLC flush/invalidate is supported in DMA APIin U-Boot * hardware DMA coherency is implemented (that might be board specific so probably we'll need to have a separate Kconfig option for controlling SLC explicitly) Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2015-03-30 10:36:04 +00:00
#endif /* __ASSEMBLY__ */
arc: add architecture header files These are header files used by ARC700 architecture. Also note that "arch-arc700/hardware.h" is only required for compilation of "designware_i2c" driver which refers to "asm/arch/hardware.h". It would be good to fix mentioned driver sometime soon but it will cause changes in ARM board configs that use "designware_i2c". Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Francois Bedard <fbedard@synopsys.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Heiko Schocher <hs@denx.de>
2014-02-04 08:56:13 +00:00
#endif /* __ASM_ARC_CACHE_H */
Reference in a new issue Copy permalink