Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-16 01:38:22 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/cmd/Kconfig

2332 lines
64 KiB
Text
Raw Normal View History

Move all command code into its own directory There are a lot of unrelated files in common, including all of the commands. Moving them into their own directory makes them easier to find and is more logical. Some commands include non-command code, such as cmd_scsi.c. This should be sorted out at some point so that the function can be enabled with or without the associated command. Unfortunately, with m68k I get this error: m68k: + M5329AFEE +arch/m68k/cpu/mcf532x/start.o: In function `_start': +arch/m68k/cpu/mcf532x/start.S:159:(.text+0x452): relocation truncated to fit: R_68K_PC16 against symbol `board_init_f' defined in .text.board_init_f section in common/built-in.o I hope someone can shed some light on what this means. I hope it isn't depending on the position of code in the image. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de> Acked-by: Stefan Roese <sr@denx.de> Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
2016-01-18 03:53:51 +00:00
menu "Command line interface"
Add an option to enable the command line Add a new Kconfig option for the command line. This is enabled by default, but when disabled it will remove the command line. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-03-14 01:07:28 +00:00
config CMDLINE
bool "Support U-Boot commands"
default y
help
Enable U-Boot's command-line functions. This provides a means
to enter commands into U-Boot for a wide variety of purposes. It
also allows scripts (containing commands) to be executed.
Various commands and command categorys can be indivdually enabled.
Depending on the number of commands enabled, this can add
substantially to the size of U-Boot.
Move all command code into its own directory There are a lot of unrelated files in common, including all of the commands. Moving them into their own directory makes them easier to find and is more logical. Some commands include non-command code, such as cmd_scsi.c. This should be sorted out at some point so that the function can be enabled with or without the associated command. Unfortunately, with m68k I get this error: m68k: + M5329AFEE +arch/m68k/cpu/mcf532x/start.o: In function `_start': +arch/m68k/cpu/mcf532x/start.S:159:(.text+0x452): relocation truncated to fit: R_68K_PC16 against symbol `board_init_f' defined in .text.board_init_f section in common/built-in.o I hope someone can shed some light on what this means. I hope it isn't depending on the position of code in the image. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de> Acked-by: Stefan Roese <sr@denx.de> Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
2016-01-18 03:53:51 +00:00
config HUSH_PARSER
bool "Use hush shell"
Add an option to enable the command line Add a new Kconfig option for the command line. This is enabled by default, but when disabled it will remove the command line. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-03-14 01:07:28 +00:00
depends on CMDLINE
Move all command code into its own directory There are a lot of unrelated files in common, including all of the commands. Moving them into their own directory makes them easier to find and is more logical. Some commands include non-command code, such as cmd_scsi.c. This should be sorted out at some point so that the function can be enabled with or without the associated command. Unfortunately, with m68k I get this error: m68k: + M5329AFEE +arch/m68k/cpu/mcf532x/start.o: In function `_start': +arch/m68k/cpu/mcf532x/start.S:159:(.text+0x452): relocation truncated to fit: R_68K_PC16 against symbol `board_init_f' defined in .text.board_init_f section in common/built-in.o I hope someone can shed some light on what this means. I hope it isn't depending on the position of code in the image. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de> Acked-by: Stefan Roese <sr@denx.de> Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
2016-01-18 03:53:51 +00:00
help
This option enables the "hush" shell (from Busybox) as command line
interpreter, thus enabling powerful command line syntax like
if...then...else...fi conditionals or `&&' and '||'
constructs ("shell scripts").
If disabled, you get the old, much simpler behaviour with a somewhat
smaller memory footprint.
Convert CONFIG_BOOTP_BOOTPATH et al to Kconfig This converts the following to Kconfig: CONFIG_BOOTP_BOOTPATH CONFIG_BOOTP_DNS CONFIG_BOOTP_GATEWAY CONFIG_BOOTP_HOSTNAME CONFIG_BOOTP_PXE CONFIG_BOOTP_SUBNETMASK CONFIG_CMDLINE_EDITING CONFIG_AUTO_COMPLETE CONFIG_SYS_LONGHELP CONFIG_SUPPORT_RAW_INITRD CONFIG_ENV_VARS_UBOOT_CONFIG Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Re-run the migration] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-02-06 13:58:59 +00:00
config CMDLINE_EDITING
bool "Enable command line editing"
depends on CMDLINE
default y
help
Enable editing and History functions for interactive command line
input operations
config AUTO_COMPLETE
bool "Enable auto complete using TAB"
depends on CMDLINE
default y
help
Enable auto completion of commands using TAB.
config SYS_LONGHELP
bool "Enable long help messages"
depends on CMDLINE
default y if CMDLINE
help
Defined when you want long help messages included
Do not set this option when short of memory.
Move all command code into its own directory There are a lot of unrelated files in common, including all of the commands. Moving them into their own directory makes them easier to find and is more logical. Some commands include non-command code, such as cmd_scsi.c. This should be sorted out at some point so that the function can be enabled with or without the associated command. Unfortunately, with m68k I get this error: m68k: + M5329AFEE +arch/m68k/cpu/mcf532x/start.o: In function `_start': +arch/m68k/cpu/mcf532x/start.S:159:(.text+0x452): relocation truncated to fit: R_68K_PC16 against symbol `board_init_f' defined in .text.board_init_f section in common/built-in.o I hope someone can shed some light on what this means. I hope it isn't depending on the position of code in the image. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de> Acked-by: Stefan Roese <sr@denx.de> Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
2016-01-18 03:53:51 +00:00
config SYS_PROMPT
string "Shell prompt"
ARM: zynq: Define default SYS_PROMPT All boards are using the same prompt that's why add it as default value to Kconfig to simplify defconfigs. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-09-25 10:32:41 +00:00
default "Zynq> " if ARCH_ZYNQ
arm64: zynqmp: Define default SYS_PROMPT All boards are using the same prompt that's why add it as default value to Kconfig to simplify defconfigs. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
2019-09-25 10:37:15 +00:00
default "ZynqMP> " if ARCH_ZYNQMP
Move all command code into its own directory There are a lot of unrelated files in common, including all of the commands. Moving them into their own directory makes them easier to find and is more logical. Some commands include non-command code, such as cmd_scsi.c. This should be sorted out at some point so that the function can be enabled with or without the associated command. Unfortunately, with m68k I get this error: m68k: + M5329AFEE +arch/m68k/cpu/mcf532x/start.o: In function `_start': +arch/m68k/cpu/mcf532x/start.S:159:(.text+0x452): relocation truncated to fit: R_68K_PC16 against symbol `board_init_f' defined in .text.board_init_f section in common/built-in.o I hope someone can shed some light on what this means. I hope it isn't depending on the position of code in the image. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de> Acked-by: Stefan Roese <sr@denx.de> Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
2016-01-18 03:53:51 +00:00
default "=> "
help
This string is displayed in the command line to the left of the
cursor.
cmd: Kconfig: migrate CONFIG_SYS_PROMPT_HUSH_PS2 Move CONFIG_SYS_PROMPT_HUSH_PS2 in Kconfig, depending on CONFIG_HUSH_PARSER, and remove the default value defined in cli_hush.c under __U_BOOT__. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-26 08:31:42 +00:00
config SYS_PROMPT_HUSH_PS2
string "Hush shell secondary prompt"
depends on HUSH_PARSER
default "> "
help
This defines the secondary prompt string, which is
printed when the command interpreter needs more input
to complete a command. Usually "> ".
common: command: Add command execution tracer. When using boot scripts it can become quite hard to understand which commands are actually executed during bootup (e.g. where is a kernel image loaded from or which DTB is in use). Shell scripts suffer from a similar problem and many shells address this problem with a command execution tracer (e.g. BASH has xtrace, which can be enabled by "set -x"). This patch introduces a command tracer for U-Boot, which prints every command with its arguments before it is executed. Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-04-05 11:03:46 +00:00
config SYS_XTRACE
string "Command execution tracer"
depends on CMDLINE
default y if CMDLINE
help
This option enables the possiblity to print all commands before
executing them and after all variables are evaluated (similar
to Bash's xtrace/'set -x' feature).
To enable the tracer a variable "xtrace" needs to be defined in
the environment.
scripts: Move Kconfig contents to cmd/Kconfig On case-insensitive file systems we have collision between scripts/kconfig/ directory and scripts/Kconfig file. This patch moves scripts/Kcofnig contents to cmd/Kconfig to fix that. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-09-28 19:33:45 +00:00
config BUILD_BIN2C
bool
Move all command code into its own directory There are a lot of unrelated files in common, including all of the commands. Moving them into their own directory makes them easier to find and is more logical. Some commands include non-command code, such as cmd_scsi.c. This should be sorted out at some point so that the function can be enabled with or without the associated command. Unfortunately, with m68k I get this error: m68k: + M5329AFEE +arch/m68k/cpu/mcf532x/start.o: In function `_start': +arch/m68k/cpu/mcf532x/start.S:159:(.text+0x452): relocation truncated to fit: R_68K_PC16 against symbol `board_init_f' defined in .text.board_init_f section in common/built-in.o I hope someone can shed some light on what this means. I hope it isn't depending on the position of code in the image. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de> Acked-by: Stefan Roese <sr@denx.de> Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
2016-01-18 03:53:51 +00:00
comment "Commands"
menu "Info commands"
acpi: Add an acpi command It is useful to dump ACPI tables in U-Boot to see what has been generated. Add a command to handle this. To allow the command to find the tables, add a position into the global data. Support subcommands to list and dump the tables. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
2020-04-26 15:19:53 +00:00
config CMD_ACPI
bool "acpi"
cmd: CMD_ACPI depends on ACPIGEN Trying to compile qemu-x86_64_defconfig with CONFIG_CMD_ACPI=y and CONFIG_ACPIGEN=n fails with ld.bfd: cmd/built-in.o: in function `do_acpi_items': cmd/acpi.c:162: undefined reference to `acpi_dump_items' Add the missing configuration dependency. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2021-01-20 20:37:56 +00:00
depends on ACPIGEN
default y
acpi: Add an acpi command It is useful to dump ACPI tables in U-Boot to see what has been generated. Add a command to handle this. To allow the command to find the tables, add a position into the global data. Support subcommands to list and dump the tables. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
2020-04-26 15:19:53 +00:00
help
List and dump ACPI tables. ACPI (Advanced Configuration and Power
Interface) is used mostly on x86 for providing information to the
Operating System about devices in the system. The tables are set up
by the firmware, typically U-Boot but possibly an earlier firmware
module, if U-Boot is chain-loaded from something else. ACPI tables
can also include code, to perform hardware-specific tasks required
by the Operating Systems. This allows some amount of separation
between the firmware and OS, and is particularly useful when you
want to make hardware changes without the OS needing to be adjusted.
Move all command code into its own directory There are a lot of unrelated files in common, including all of the commands. Moving them into their own directory makes them easier to find and is more logical. Some commands include non-command code, such as cmd_scsi.c. This should be sorted out at some point so that the function can be enabled with or without the associated command. Unfortunately, with m68k I get this error: m68k: + M5329AFEE +arch/m68k/cpu/mcf532x/start.o: In function `_start': +arch/m68k/cpu/mcf532x/start.S:159:(.text+0x452): relocation truncated to fit: R_68K_PC16 against symbol `board_init_f' defined in .text.board_init_f section in common/built-in.o I hope someone can shed some light on what this means. I hope it isn't depending on the position of code in the image. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de> Acked-by: Stefan Roese <sr@denx.de> Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
2016-01-18 03:53:51 +00:00
config CMD_BDI
bool "bdinfo"
default y
help
Print board info
cmd: add a new command "config" to show .config contents This feature is inspired by /proc/config.gz of Linux. In Linux, if CONFIG_IKCONFIG is enabled, the ".config" file contents are embedded in the kernel image. If CONFIG_IKCONFIG_PROC is also enabled, the ".config" contents are exposed to /proc/config.gz. Users can do "zcat /proc/config.gz" to check which config options are enabled on the running kernel image. The idea is almost the same here; if CONFIG_CMD_CONFIG is enabled, the ".config" contents are compressed and saved in the U-Boot image, then printed by the new command "config". The usage is quite simple. Enable CONFIG_CMD_CONFIG, then run > config from the command line interface. The ".config" contents will be printed on the console. This feature increases the U-Boot image size by about 4KB (this is mostly due to the gzip-compressed .config file). By default, it is enabled only for Sandbox because we do not care about the memory footprint on it. Of course, this feature is architecture agnostic, so you can enable it on any board if the image size increase is acceptable for you. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-01-30 02:12:07 +00:00
config CMD_CONFIG
bool "config"
default SANDBOX
Kconfig: Sort bool, default, select and imply options Fix Kconfig bool, default, select and imply options to be alphabetically sorted. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-07-23 13:55:13 +00:00
select BUILD_BIN2C
cmd: add a new command "config" to show .config contents This feature is inspired by /proc/config.gz of Linux. In Linux, if CONFIG_IKCONFIG is enabled, the ".config" file contents are embedded in the kernel image. If CONFIG_IKCONFIG_PROC is also enabled, the ".config" contents are exposed to /proc/config.gz. Users can do "zcat /proc/config.gz" to check which config options are enabled on the running kernel image. The idea is almost the same here; if CONFIG_CMD_CONFIG is enabled, the ".config" contents are compressed and saved in the U-Boot image, then printed by the new command "config". The usage is quite simple. Enable CONFIG_CMD_CONFIG, then run > config from the command line interface. The ".config" contents will be printed on the console. This feature increases the U-Boot image size by about 4KB (this is mostly due to the gzip-compressed .config file). By default, it is enabled only for Sandbox because we do not care about the memory footprint on it. Of course, this feature is architecture agnostic, so you can enable it on any board if the image size increase is acceptable for you. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-01-30 02:12:07 +00:00
help
Print ".config" contents.
If this option is enabled, the ".config" file contents are embedded
in the U-Boot image and can be printed on the console by the "config"
command. This provides information of which options are enabled on
the running U-Boot.
Move all command code into its own directory There are a lot of unrelated files in common, including all of the commands. Moving them into their own directory makes them easier to find and is more logical. Some commands include non-command code, such as cmd_scsi.c. This should be sorted out at some point so that the function can be enabled with or without the associated command. Unfortunately, with m68k I get this error: m68k: + M5329AFEE +arch/m68k/cpu/mcf532x/start.o: In function `_start': +arch/m68k/cpu/mcf532x/start.S:159:(.text+0x452): relocation truncated to fit: R_68K_PC16 against symbol `board_init_f' defined in .text.board_init_f section in common/built-in.o I hope someone can shed some light on what this means. I hope it isn't depending on the position of code in the image. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de> Acked-by: Stefan Roese <sr@denx.de> Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
2016-01-18 03:53:51 +00:00
config CMD_CONSOLE
bool "coninfo"
default y
help
Print console devices and information.
config CMD_CPU
bool "cpu"
cmd: CMD_CPU depends on CPU Compiling with CONFIG_CMD_CPU=y and CONFIG_CPU=n fails with: aarch64-linux-gnu-ld.bfd: cmd/built-in.o: in function `print_cpu_list': /home/user/u-boot/cmd/cpu.c:34: undefined reference to `cpu_get_desc' aarch64-linux-gnu-ld.bfd: /home/user/u-boot/cmd/cpu.c:39: undefined reference to `cpu_get_info' Segmentation fault (core dumped) make: *** [Makefile:1757: u-boot] Error 139 make: *** Deleting file 'u-boot' See error report in https://stackoverflow.com/questions/64678347. Add the missing build dependency. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-11-04 23:29:11 +00:00
depends on CPU
Move all command code into its own directory There are a lot of unrelated files in common, including all of the commands. Moving them into their own directory makes them easier to find and is more logical. Some commands include non-command code, such as cmd_scsi.c. This should be sorted out at some point so that the function can be enabled with or without the associated command. Unfortunately, with m68k I get this error: m68k: + M5329AFEE +arch/m68k/cpu/mcf532x/start.o: In function `_start': +arch/m68k/cpu/mcf532x/start.S:159:(.text+0x452): relocation truncated to fit: R_68K_PC16 against symbol `board_init_f' defined in .text.board_init_f section in common/built-in.o I hope someone can shed some light on what this means. I hope it isn't depending on the position of code in the image. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de> Acked-by: Stefan Roese <sr@denx.de> Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
2016-01-18 03:53:51 +00:00
help
Print information about available CPUs. This normally shows the
number of CPUs, type (e.g. manufacturer, architecture, product or
internal name) and clock frequency. Other information may be
available depending on the CPU driver.
config CMD_LICENSE
bool "license"
cmd: rework "license" command The previous commit ("add a new command to show .config contents") improves the basic infrastructure of "embed a compressed file into the U-Boot image, and print it by a command". The same pattern for the "license" command. This commit reworks the command to improve the following: [1] Improve log style Kbuild style log GZIP cmd/license_data.gz CHK cmd/license_data_gz.h UPD cmd/license_data_gz.h CHK cmd/license_data_size.h UPD cmd/license_data_size.h instead of the bare Make log: cat ./Licenses/gpl-2.0.txt | gzip -9 -c | \ tools/bin2header license_gzip > ./include/license.h [2] Collect related code into the "cmd" directory Prior to this commit, the license.h was created by tools/Makefile, placed under the "include" directory, included from cmd/license.c, and deleted by the top-level Makefile. It is not a good idea to scatter related code. [3] Drop the fixed-malloc size LICENSE_MAX Just allocate the minimum required size of buffer because we know the size of the original gpl-2.0.txt. [4] Fix more issues Terminate the buffer with zero to prevent puts() from over-running. Add "static" to do_license. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-01-30 02:12:08 +00:00
select BUILD_BIN2C
Move all command code into its own directory There are a lot of unrelated files in common, including all of the commands. Moving them into their own directory makes them easier to find and is more logical. Some commands include non-command code, such as cmd_scsi.c. This should be sorted out at some point so that the function can be enabled with or without the associated command. Unfortunately, with m68k I get this error: m68k: + M5329AFEE +arch/m68k/cpu/mcf532x/start.o: In function `_start': +arch/m68k/cpu/mcf532x/start.S:159:(.text+0x452): relocation truncated to fit: R_68K_PC16 against symbol `board_init_f' defined in .text.board_init_f section in common/built-in.o I hope someone can shed some light on what this means. I hope it isn't depending on the position of code in the image. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de> Acked-by: Stefan Roese <sr@denx.de> Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
2016-01-18 03:53:51 +00:00
help
Print GPL license text
x86: sandbox: Add a PMC emulator and test Add a simple PMC for sandbox to permit tests to run. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-12-07 04:41:54 +00:00
config CMD_PMC
bool "pmc"
help
Provides access to the Intel Power-Management Controller (PMC) so
that its state can be examined. This does not currently support
changing the state but it is still useful for debugging and seeing
what is going on.
Convert CONFIG_CMD_REGINFO to Kconfig This patch converts CONFIG_CMD_REGINFO to Kconfig Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-08-04 22:34:40 +00:00
config CMD_REGINFO
bool "reginfo"
depends on PPC
help
Register dump
cmd: add tlv_eeprom command Add support for read/write of ONIE "Tlvinfo" EEPROM data format. TLV stands for Type-Length-Value. The data format is described here: https://opencomputeproject.github.io/onie/design-spec/hw_requirements.html#board-eeprom-information-format Based on U-Boot patch from the Open Compute project: https://github.com/opencomputeproject/onie/blob/ec87e872d46b9805565d2c6124b2f701ef1c07b1/patches/u-boot/common/feature-sys-eeprom-tlv-common.patch Keep only I2C EEPROM support. Use the generic eeprom driver. Fix checkpatch issues. Add support for multiple EEPROM TLV stores on the same system. This is useful in case of SOM and carrier that both provide ID and hardware configuration information. Add option to enable for SPL. This allows selection of RAM configuration based on EEPROM stored board identification. Signed-off-by: Baruch Siach <baruch@tkos.co.il>
2020-01-21 13:44:54 +00:00
config CMD_TLV_EEPROM
bool "tlv_eeprom"
depends on I2C_EEPROM
help
Display and program the system EEPROM data block in ONIE Tlvinfo
format. TLV stands for Type-Length-Value.
config SPL_CMD_TLV_EEPROM
bool "tlv_eeprom for SPL"
depends on SPL_I2C_EEPROM
select SPL_DRIVERS_MISC_SUPPORT
help
Read system EEPROM data block in ONIE Tlvinfo format from SPL.
cmd: provide command sbi Provide a command to display information about the SBI implementation. The output might look like: => sbi SBI 0.2 OpenSBI Extensions: sbi_set_timer sbi_console_putchar sbi_console_getchar sbi_clear_ipi sbi_send_ipi sbi_remote_fence_i sbi_remote_sfence_vma sbi_remote_sfence_vma_asid sbi_shutdown SBI Base Functionality Timer Extension IPI Extension RFENCE Extension Hart State Management Extension The command can be used to construct a unit test checking that the communication with the SEE is working. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Tested-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Pragnesh Patel <pragnesh.patel@openfive.com> Tested-by: Pragnesh Patel <pragnesh.patel@openfive.com> Reviewed-by: Rick Chen <rick@andestech.com> Tested-by: Rick Chen <rick@andestech.com>
2020-08-20 17:43:39 +00:00
config CMD_SBI
bool "sbi"
depends on RISCV_SMODE && SBI_V02
help
Display information about the SBI implementation.
Move all command code into its own directory There are a lot of unrelated files in common, including all of the commands. Moving them into their own directory makes them easier to find and is more logical. Some commands include non-command code, such as cmd_scsi.c. This should be sorted out at some point so that the function can be enabled with or without the associated command. Unfortunately, with m68k I get this error: m68k: + M5329AFEE +arch/m68k/cpu/mcf532x/start.o: In function `_start': +arch/m68k/cpu/mcf532x/start.S:159:(.text+0x452): relocation truncated to fit: R_68K_PC16 against symbol `board_init_f' defined in .text.board_init_f section in common/built-in.o I hope someone can shed some light on what this means. I hope it isn't depending on the position of code in the image. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de> Acked-by: Stefan Roese <sr@denx.de> Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
2016-01-18 03:53:51 +00:00
endmenu
menu "Boot commands"
config CMD_BOOTD
bool "bootd"
default y
help
Run the command stored in the environment "bootcmd", i.e.
"bootd" does the same thing as "run bootcmd".
config CMD_BOOTM
bool "bootm"
default y
help
Boot an application image from the memory.
bootm: Add a bootm command for type IH_OS_EFI Add support for booting EFI binaries contained in FIT images. A typical usage scenario is chain-loading GRUB2 in a verified boot environment. Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-12-24 16:05:39 +00:00
config BOOTM_EFI
bool "Support booting UEFI FIT images"
depends on CMD_BOOTEFI && CMD_BOOTM && FIT
default y
help
Support booting UEFI FIT images via the bootm command.
cmd: Kconfig: Add a Kconfig options for a few CMD Add the following CMD options to Kconfig: CMD_BOOTZ CMD_ASKENV CMD_GREPENV CMD_USB_MASS_STORAGE CMD_FAT CMD_MII CMD_CACHE CMD_DFU CMD_EXT2 CMD_EXT4 CMD_EXT4_WRITE CMD_FS_GENERIC CMD_MMC Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> [trini: Don't make CMD_USB_MASS_STORAGE nor CMD_DFU depend on CMD_USB] Signed-off-by: Tom Rini <trini@konsulko.com>
2016-04-21 14:05:23 +00:00
config CMD_BOOTZ
bool "bootz"
help
Boot the Linux zImage
cmd: booti: move CONFIG_CMD_BOOTI to Kconfig This command is used to boot ARM64 Linux. I made DISTRO_DEFAULTS select this option for ARM64 to respect include/config_distro_defaults.h. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2016-08-12 12:31:16 +00:00
config CMD_BOOTI
bool "booti"
RISCV: image: Add booti support This patch adds booti support for RISC-V Linux kernel. The existing bootm method will also continue to work as it is. It depends on the following kernel patch which adds the header to the flat Image. Gzip compressed Image (Image.gz) support is not enabled with this patch. https://patchwork.kernel.org/patch/10925543/ Tested on HiFive Unleashed and QEMU. Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Tom Rini <trini@konsulko.com> Tested-by: Karsten Merker <merker@debian.org> Reviewed-by: Marek Vasut <marek.vasut@gmail.com>
2019-05-07 00:49:39 +00:00
depends on ARM64 || RISCV
cmd: booti: move CONFIG_CMD_BOOTI to Kconfig This command is used to boot ARM64 Linux. I made DISTRO_DEFAULTS select this option for ARM64 to respect include/config_distro_defaults.h. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2016-08-12 12:31:16 +00:00
default y
help
Boot an AArch64 Linux Kernel image from memory.
Kconfig: Migrate CONFIG_BOOTM_* options Migrate all of the existing OS support options that are under CONFIG_BOOTM_* to Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
2019-09-20 21:36:50 +00:00
config BOOTM_LINUX
bool "Support booting Linux OS images"
depends on CMD_BOOTM || CMD_BOOTZ || CMD_BOOTI
default y
help
Support booting the Linux kernel directly via a command such as bootm
or booti or bootz.
config BOOTM_NETBSD
bool "Support booting NetBSD (non-EFI) loader images"
depends on CMD_BOOTM
default y
help
Support booting NetBSD via the bootm command.
config BOOTM_OPENRTOS
bool "Support booting OPENRTOS / FreeRTOS images"
depends on CMD_BOOTM
help
Support booting OPENRTOS / FreeRTOS via the bootm command.
config BOOTM_OSE
bool "Support booting Enea OSE images"
cmd/Kconfig: Add more dependencies to OSE bootm support Per Enea OSE documentation, it supports some classes of ARM, PowerPC and X86. Limit the option to those platforms. Signed-off-by: Tom Rini <trini@konsulko.com>
2019-12-05 23:46:11 +00:00
depends on (ARM && (ARM64 || CPU_V7A || CPU_V7R) || SANDBOX || PPC || X86)
Kconfig: Migrate CONFIG_BOOTM_* options Migrate all of the existing OS support options that are under CONFIG_BOOTM_* to Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
2019-09-20 21:36:50 +00:00
depends on CMD_BOOTM
help
Support booting Enea OSE images via the bootm command.
config BOOTM_PLAN9
bool "Support booting Plan9 OS images"
depends on CMD_BOOTM
default y
help
Support booting Plan9 images via the bootm command.
config BOOTM_RTEMS
bool "Support booting RTEMS OS images"
depends on CMD_BOOTM
default y
help
Support booting RTEMS images via the bootm command.
config BOOTM_VXWORKS
bool "Support booting VxWorks OS images"
depends on CMD_BOOTM
default y
help
Support booting VxWorks images via the bootm command.
cmd: move down CONFIG_CMD_BOOTEFI after CONFIG_BOOTM_VXWORKS Due to the commit 4b0bcfa7c4ec ("Kconfig: Migrate CONFIG_BOOTM_* options") BOOTEFI and BOOTEFI_HELLO_COMPILE (and other BOOTEFI configs) are displayed in a long distance. This will make it difficult for us to understand that those configurations are closely related. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-11-08 01:32:15 +00:00
config CMD_BOOTEFI
bool "bootefi"
depends on EFI_LOADER
default y
help
Boot an EFI image from memory.
efi_loader: Allow to compile helloworld.efi w/o bundling it Today we can compile a self-contained hello world efi test binary that allows us to quickly verify whether the EFI loader framwork works. We can use that binary outside of the self-contained test case though, by providing it to a to-be-tested system via tftp. This patch separates compilation of the helloworld.efi file from including it in the u-boot binary for "bootefi hello". It also modifies the efi_loader test case to enable travis to pick up the compiled file. Because we're now no longer bloating the resulting u-boot binary, we can enable compilation always, giving us good travis test coverage. Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-11-17 21:40:10 +00:00
config CMD_BOOTEFI_HELLO_COMPILE
bool "Compile a standard EFI hello world binary for testing"
efi_loader: support building UEFI binaries on sandbox On the sandbox the UEFI binaries must match the host architectures. Adjust the Makefiles. Provide the PE/COFF header and relocation files. Allow building helloworld.efi on the sandbox. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-11-07 07:05:17 +00:00
depends on CMD_BOOTEFI && !CPU_V7M
efi_loader: Allow to compile helloworld.efi w/o bundling it Today we can compile a self-contained hello world efi test binary that allows us to quickly verify whether the EFI loader framwork works. We can use that binary outside of the self-contained test case though, by providing it to a to-be-tested system via tftp. This patch separates compilation of the helloworld.efi file from including it in the u-boot binary for "bootefi hello". It also modifies the efi_loader test case to enable travis to pick up the compiled file. Because we're now no longer bloating the resulting u-boot binary, we can enable compilation always, giving us good travis test coverage. Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-11-17 21:40:10 +00:00
default y
help
This compiles a standard EFI hello world application with U-Boot so
that it can be used with the test/py testing framework. This is useful
for testing that EFI is working at a basic level, and for bringing
up EFI support on a new architecture.
No additional space will be required in the resulting U-Boot binary
when this option is enabled.
efi: Add support for a hello world test program It is useful to have a basic sanity check for EFI loader support. Add a 'bootefi hello' command which loads HelloWord.efi and runs it under U-Boot. Signed-off-by: Simon Glass <sjg@chromium.org> [agraf: Fix documentation, add unfulfilled kconfig dep] Signed-off-by: Alexander Graf <agraf@suse.de>
2016-11-07 15:47:08 +00:00
config CMD_BOOTEFI_HELLO
bool "Allow booting a standard EFI hello world for testing"
efi_loader: Allow to compile helloworld.efi w/o bundling it Today we can compile a self-contained hello world efi test binary that allows us to quickly verify whether the EFI loader framwork works. We can use that binary outside of the self-contained test case though, by providing it to a to-be-tested system via tftp. This patch separates compilation of the helloworld.efi file from including it in the u-boot binary for "bootefi hello". It also modifies the efi_loader test case to enable travis to pick up the compiled file. Because we're now no longer bloating the resulting u-boot binary, we can enable compilation always, giving us good travis test coverage. Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-11-17 21:40:10 +00:00
depends on CMD_BOOTEFI_HELLO_COMPILE
efi_selftest: enable 'bootefi hello' In our Python tests we want to run 'bootefi hello'. Enable it by default when compiling with CMD_BOOTEFI_SELFTEST. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-07-13 05:33:40 +00:00
default y if CMD_BOOTEFI_SELFTEST
efi: Add support for a hello world test program It is useful to have a basic sanity check for EFI loader support. Add a 'bootefi hello' command which loads HelloWord.efi and runs it under U-Boot. Signed-off-by: Simon Glass <sjg@chromium.org> [agraf: Fix documentation, add unfulfilled kconfig dep] Signed-off-by: Alexander Graf <agraf@suse.de>
2016-11-07 15:47:08 +00:00
help
This adds a standard EFI hello world application to U-Boot so that
it can be used with the 'bootefi hello' command. This is useful
for testing that EFI is working at a basic level, and for bringing
up EFI support on a new architecture.
efi_selftest: provide an EFI selftest application A testing framework for the EFI API is provided. It can be executed with the 'bootefi selftest' command. It is coded in a way that at a later stage we may turn it into a standalone EFI application. The current build system does not allow this yet. All tests use a driver model and are run in three phases: setup, execute, teardown. A test may be setup and executed at boottime, it may be setup at boottime and executed at runtime, or it may be setup and executed at runtime. After executing all tests the system is reset. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2017-09-15 08:06:11 +00:00
source lib/efi_selftest/Kconfig
cmd: Convert CMD_BOOTMENU Also convert MENU while we're in here. Signed-off-by: Tom Rini <trini@konsulko.com>
2016-11-29 14:14:56 +00:00
config CMD_BOOTMENU
bool "bootmenu"
select MENU
help
Add an ANSI terminal boot menu command.
dtimg/am57xx_evm_defconfig: Rename dtimg to adtimg Rename the existing 'dtimg' command to 'adtimg', in order to: - Suggest the Android origins and scope - Be consistent with the upcoming 'abootimg' command (naming suggested by Simon [*]) The change in _not_ backward compatible, but its benefits outweigh its downsides, given that we don't expect active users of 'dtimg' today. Perform the rename in several steps: 1. Rename *.c file and Kconfig symbol. This should allow 'git log --follow' to properly track the history of 'adtimg.c' 2. 's/dtimg/adtimg/g' in the internal namespace of 'adtimg.c' ELF comparison [**] before and after shows no functional change. [*] https://patchwork.ozlabs.org/patch/1182212/#2291600 [**] diff -u <(objdump -d cmd/dtimg.o) <(objdump -d cmd/adtimg.o) Cc: Tom Rini <trini@konsulko.com> Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com> Reviewed-by: Simon Glass<sjg@chromium.org> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
2019-12-24 16:51:06 +00:00
config CMD_ADTIMG
bool "adtimg"
cmd: Add dtimg command dtimg command allows user to work with Android DTB/DTBO image format. Such as, getting the address of desired DTB/DTBO file, printing the dump of the image in U-Boot shell, etc. This command is needed to provide Android boot with new Android DT image format further. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-08-16 20:34:13 +00:00
help
Android DTB/DTBO image manipulation commands. Read dtb/dtbo files from
image into RAM, dump image structure information, etc. Those dtb/dtbo
files should be merged in one dtb further, which needs to be passed to
the kernel, as part of a boot process.
cmd: abootimg: Add abootimg command This command can be used to extract fields and image payloads from Android Boot Image. It can be used for example to implement boot flow where dtb is taken from boot.img (as v2 incorporated dtb inside of boot.img). Using this command, one can obtain needed dtb blob from boot.img in scripting manner, and then apply needed dtbo's (from "dtbo" partition) on top of that, providing then the resulting image to bootm command in order to boot the Android. Also right now this command has the sub-command to get an address and size of recovery dtbo from recovery image (for non-A/B devices only, see [1,2] for details). It can be tested like this: => mmc dev 1 => part start mmc 1 boot_a boot_start => part size mmc 1 boot_a boot_size => mmc read $loadaddr $boot_start $boot_size => abootimg get ver => abootimg dump dtb [1] https://source.android.com/devices/bootloader/boot-image-header [2] https://source.android.com/devices/architecture/dto/partitions Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-24 15:53:42 +00:00
config CMD_ABOOTIMG
bool "abootimg"
depends on ANDROID_BOOT_IMAGE
help
Android Boot Image manipulation commands. Allows one to extract
images contained in boot.img, like kernel, ramdisk, dtb, etc, and
obtain corresponding meta-information from boot.img.
doc: android: Add documentation for Android Boot Image Describe Android Boot Image format, how its support is implemented in U-Boot and associated commands usage. Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-24 15:53:43 +00:00
See doc/android/boot-image.rst for details.
Move all command code into its own directory There are a lot of unrelated files in common, including all of the commands. Moving them into their own directory makes them easier to find and is more logical. Some commands include non-command code, such as cmd_scsi.c. This should be sorted out at some point so that the function can be enabled with or without the associated command. Unfortunately, with m68k I get this error: m68k: + M5329AFEE +arch/m68k/cpu/mcf532x/start.o: In function `_start': +arch/m68k/cpu/mcf532x/start.S:159:(.text+0x452): relocation truncated to fit: R_68K_PC16 against symbol `board_init_f' defined in .text.board_init_f section in common/built-in.o I hope someone can shed some light on what this means. I hope it isn't depending on the position of code in the image. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de> Acked-by: Stefan Roese <sr@denx.de> Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
2016-01-18 03:53:51 +00:00
config CMD_ELF
bool "bootelf, bootvx"
default y
lib: elf: Move the generic elf loading/validating functions to lib Move the generic elf loading/validating functions to lib/ so that they can be re-used and accessed by code existing outside cmd. While at it remove the duplicate static version of load_elf_image_phdr under arch/arm/mach-imx/imx_bootaux.c. Signed-off-by: Keerthy <j-keerthy@ti.com> Suggested-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2020-02-12 08:25:03 +00:00
select LIB_ELF
Move all command code into its own directory There are a lot of unrelated files in common, including all of the commands. Moving them into their own directory makes them easier to find and is more logical. Some commands include non-command code, such as cmd_scsi.c. This should be sorted out at some point so that the function can be enabled with or without the associated command. Unfortunately, with m68k I get this error: m68k: + M5329AFEE +arch/m68k/cpu/mcf532x/start.o: In function `_start': +arch/m68k/cpu/mcf532x/start.S:159:(.text+0x452): relocation truncated to fit: R_68K_PC16 against symbol `board_init_f' defined in .text.board_init_f section in common/built-in.o I hope someone can shed some light on what this means. I hope it isn't depending on the position of code in the image. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de> Acked-by: Stefan Roese <sr@denx.de> Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
2016-01-18 03:53:51 +00:00
help
Boot an ELF/vxWorks image from the memory.
cmd: fdt: Use separate CMD_FDT Kconfig entry instead of OF_LIBFDT Create CMD_FDT Kconfig entry to have an option to disable fdt command which is not required for small configuration which requires libfdt only. Enable it by default for all targets which enables OF_LIBFDT. Signed-off-by: Michal Simek <michal.simek@xilinx.com> [trini: Fixup flea3/sandbox/id8313/siemens-am33xx/smartweb] Signed-off-by: Tom Rini <trini@konsulko.com>
2016-04-06 18:28:04 +00:00
config CMD_FDT
bool "Flattened Device Tree utility commands"
default y
depends on OF_LIBFDT
help
Do FDT related setup before booting into the Operating System.
Move all command code into its own directory There are a lot of unrelated files in common, including all of the commands. Moving them into their own directory makes them easier to find and is more logical. Some commands include non-command code, such as cmd_scsi.c. This should be sorted out at some point so that the function can be enabled with or without the associated command. Unfortunately, with m68k I get this error: m68k: + M5329AFEE +arch/m68k/cpu/mcf532x/start.o: In function `_start': +arch/m68k/cpu/mcf532x/start.S:159:(.text+0x452): relocation truncated to fit: R_68K_PC16 against symbol `board_init_f' defined in .text.board_init_f section in common/built-in.o I hope someone can shed some light on what this means. I hope it isn't depending on the position of code in the image. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de> Acked-by: Stefan Roese <sr@denx.de> Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
2016-01-18 03:53:51 +00:00
config CMD_GO
bool "go"
default y
help
Start an application at a given address.
config CMD_RUN
bool "run"
default y
help
Run the command in the given environment variable.
config CMD_IMI
bool "iminfo"
default y
help
Print header information for application image.
config CMD_IMLS
bool "imls"
help
List all images found in flash
config CMD_XIMG
bool "imxtract"
default y
help
Extract a part of a multi-image.
Convert CONFIG_CMD_SPL to Kconfig This converts the following to Kconfig: CONFIG_CMD_SPL Note that trats does not actually use SPL, so this option can no-longer be set. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-08-04 22:34:48 +00:00
config CMD_SPL
bool "spl export - Export boot information for Falcon boot"
depends on SPL
help
Falcon mode allows booting directly from SPL into an Operating
System such as Linux, thus skipping U-Boot proper. See
doc/README.falcon for full information about how to use this
command.
Convert CONFIG_CMD_SPL_NAND_OFS to Kconfig This converts the following to Kconfig: CONFIG_CMD_SPL_NAND_OFS Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-08-04 22:34:49 +00:00
config CMD_SPL_NAND_OFS
Kconfig: cosmetic: Update description of CMD_SPL_NAND_OFS The CMD_SPL_NAND_OFS description was a bit misleading, has been updated. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-05-16 14:01:36 +00:00
hex "Offset of OS args or dtb for Falcon-mode NAND boot"
Kconfig: Make CMD_SPL_NAND_OFS only available when proper memory is used This commit makes the CMD_SPL_NAND_OFS only visible when we use NAND memory. Before this change it was present when only CMD_SPL was enabled (and would stay when board with other falcon boot medium is used). Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-05-16 14:01:35 +00:00
depends on CMD_SPL && (TPL_NAND_SUPPORT || SPL_NAND_SUPPORT)
Convert CONFIG_CMD_SPL_NAND_OFS to Kconfig This converts the following to Kconfig: CONFIG_CMD_SPL_NAND_OFS Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-08-04 22:34:49 +00:00
default 0
help
This provides the offset of the command line arguments for Linux
when booting from NAND in Falcon mode. See doc/README.falcon
for full information about how to use this option (and also see
board/gateworks/gw_ventana/README for an example).
Kconfig: Add CMD_SPL_NOR_OFS config for falcon boot argument offset This option will provide the offset in the parallel NOR flash memory to, which the falcon boot data is stored. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-05-16 14:01:37 +00:00
config CMD_SPL_NOR_OFS
hex "Offset of OS args or dtb for Falcon-mode NOR boot"
depends on CMD_SPL && SPL_NOR_SUPPORT
default 0
help
This provides the offset of the command line arguments or dtb for
Linux when booting from NOR in Falcon mode.
Convert CONFIG_CMD_SPL_WRITE_SIZE to Kconfig This converts the following to Kconfig: CONFIG_CMD_SPL_WRITE_SIZE Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-08-04 22:34:50 +00:00
config CMD_SPL_WRITE_SIZE
hex "Size of argument area"
depends on CMD_SPL
default 0x2000
help
This provides the size of the command-line argument area in NAND
flash used by Falcon-mode boot. See the documentation until CMD_SPL
for detail.
Convert CONFIG_CMD_THOR_DOWNLOAD to Kconfig This converts the following to Kconfig: CONFIG_CMD_THOR_DOWNLOAD Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-08-04 22:34:57 +00:00
config CMD_THOR_DOWNLOAD
bool "thor - TIZEN 'thor' download"
cmd: thor: select DFU subsystem also for 'thor' download tool 'THOR' download command requires DFU infrastructure to properly flash board images. It can be used without enabling DFU command, so add such dependency to Kconfig. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Lukasz Majewski <lukma@denx.de>
2019-10-02 10:29:08 +00:00
select DFU
Convert CONFIG_CMD_THOR_DOWNLOAD to Kconfig This converts the following to Kconfig: CONFIG_CMD_THOR_DOWNLOAD Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-08-04 22:34:57 +00:00
help
Implements the 'thor' download protocol. This is a way of
downloading a software update over USB from an attached host.
There is no documentation about this within the U-Boot source code
but you should be able to find something on the interwebs.
Convert CONFIG_CMD_ZBOOT to Kconfig This converts the following to Kconfig: CONFIG_CMD_ZBOOT Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-08-04 22:35:03 +00:00
config CMD_ZBOOT
bool "zboot - x86 boot command"
help
With x86 machines it is common to boot a bzImage file which
contains both a kernel and a setup.bin file. The latter includes
configuration information from the dark ages which x86 boards still
need to pick things out of.
Consider using FIT in preference to this since it supports directly
booting both 32- and 64-bit kernels, as well as secure boot.
Documentation is available in doc/uImage.FIT/x86-fit-boot.txt
Move all command code into its own directory There are a lot of unrelated files in common, including all of the commands. Moving them into their own directory makes them easier to find and is more logical. Some commands include non-command code, such as cmd_scsi.c. This should be sorted out at some point so that the function can be enabled with or without the associated command. Unfortunately, with m68k I get this error: m68k: + M5329AFEE +arch/m68k/cpu/mcf532x/start.o: In function `_start': +arch/m68k/cpu/mcf532x/start.S:159:(.text+0x452): relocation truncated to fit: R_68K_PC16 against symbol `board_init_f' defined in .text.board_init_f section in common/built-in.o I hope someone can shed some light on what this means. I hope it isn't depending on the position of code in the image. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de> Acked-by: Stefan Roese <sr@denx.de> Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
2016-01-18 03:53:51 +00:00
endmenu
menu "Environment commands"
cmd: Kconfig: Add a Kconfig options for a few CMD Add the following CMD options to Kconfig: CMD_BOOTZ CMD_ASKENV CMD_GREPENV CMD_USB_MASS_STORAGE CMD_FAT CMD_MII CMD_CACHE CMD_DFU CMD_EXT2 CMD_EXT4 CMD_EXT4_WRITE CMD_FS_GENERIC CMD_MMC Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> [trini: Don't make CMD_USB_MASS_STORAGE nor CMD_DFU depend on CMD_USB] Signed-off-by: Tom Rini <trini@konsulko.com>
2016-04-21 14:05:23 +00:00
config CMD_ASKENV
bool "ask for env variable"
help
Ask for environment variable
Move all command code into its own directory There are a lot of unrelated files in common, including all of the commands. Moving them into their own directory makes them easier to find and is more logical. Some commands include non-command code, such as cmd_scsi.c. This should be sorted out at some point so that the function can be enabled with or without the associated command. Unfortunately, with m68k I get this error: m68k: + M5329AFEE +arch/m68k/cpu/mcf532x/start.o: In function `_start': +arch/m68k/cpu/mcf532x/start.S:159:(.text+0x452): relocation truncated to fit: R_68K_PC16 against symbol `board_init_f' defined in .text.board_init_f section in common/built-in.o I hope someone can shed some light on what this means. I hope it isn't depending on the position of code in the image. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de> Acked-by: Stefan Roese <sr@denx.de> Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
2016-01-18 03:53:51 +00:00
config CMD_EXPORTENV
bool "env export"
default y
help
Export environments.
config CMD_IMPORTENV
bool "env import"
default y
help
Import environments.
config CMD_EDITENV
bool "editenv"
default y
help
Edit environment variable.
cmd: Kconfig: Add a Kconfig options for a few CMD Add the following CMD options to Kconfig: CMD_BOOTZ CMD_ASKENV CMD_GREPENV CMD_USB_MASS_STORAGE CMD_FAT CMD_MII CMD_CACHE CMD_DFU CMD_EXT2 CMD_EXT4 CMD_EXT4_WRITE CMD_FS_GENERIC CMD_MMC Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> [trini: Don't make CMD_USB_MASS_STORAGE nor CMD_DFU depend on CMD_USB] Signed-off-by: Tom Rini <trini@konsulko.com>
2016-04-21 14:05:23 +00:00
config CMD_GREPENV
bool "search env"
help
Allow for searching environment variables
Move all command code into its own directory There are a lot of unrelated files in common, including all of the commands. Moving them into their own directory makes them easier to find and is more logical. Some commands include non-command code, such as cmd_scsi.c. This should be sorted out at some point so that the function can be enabled with or without the associated command. Unfortunately, with m68k I get this error: m68k: + M5329AFEE +arch/m68k/cpu/mcf532x/start.o: In function `_start': +arch/m68k/cpu/mcf532x/start.S:159:(.text+0x452): relocation truncated to fit: R_68K_PC16 against symbol `board_init_f' defined in .text.board_init_f section in common/built-in.o I hope someone can shed some light on what this means. I hope it isn't depending on the position of code in the image. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de> Acked-by: Stefan Roese <sr@denx.de> Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
2016-01-18 03:53:51 +00:00
config CMD_SAVEENV
bool "saveenv"
default y
help
Save all environment variables into the compiled-in persistent
storage.
env: register erase command this patch adds basic changes for adding a erase-subcommand to env with this command the environment stored on non-volatile storage written by saveenv can be cleared. Signed-off-by: Frank Wunderlich <frank-w@public-files.de> squashed fixes - start message with "Erasing" - mark erase-function as optional - env: separate eraseenv from saveenv Suggested-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-06-29 09:36:19 +00:00
config CMD_ERASEENV
bool "eraseenv"
default n
depends on CMD_SAVEENV
help
Erase environment variables from the compiled-in persistent
storage.
Move all command code into its own directory There are a lot of unrelated files in common, including all of the commands. Moving them into their own directory makes them easier to find and is more logical. Some commands include non-command code, such as cmd_scsi.c. This should be sorted out at some point so that the function can be enabled with or without the associated command. Unfortunately, with m68k I get this error: m68k: + M5329AFEE +arch/m68k/cpu/mcf532x/start.o: In function `_start': +arch/m68k/cpu/mcf532x/start.S:159:(.text+0x452): relocation truncated to fit: R_68K_PC16 against symbol `board_init_f' defined in .text.board_init_f section in common/built-in.o I hope someone can shed some light on what this means. I hope it isn't depending on the position of code in the image. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de> Acked-by: Stefan Roese <sr@denx.de> Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
2016-01-18 03:53:51 +00:00
config CMD_ENV_EXISTS
bool "env exists"
default y
help
Check if a variable is defined in the environment for use in
shell scripting.
Convert CONFIG_CMD_ENV_CALLBACK to Kconfig This converts the following to Kconfig: CONFIG_CMD_ENV_CALLBACK Signed-off-by: Simon Glass <sjg@chromium.org>
2017-05-17 09:25:13 +00:00
config CMD_ENV_CALLBACK
bool "env callbacks - print callbacks and their associated variables"
help
Some environment variable have callbacks defined by
U_BOOT_ENV_CALLBACK. These are called when the variable changes.
For example changing "baudrate" adjust the serial baud rate. This
command lists the currently defined callbacks.
Convert CONFIG_CMD_ENV_FLAGS to Kconfig This converts the following to Kconfig: CONFIG_CMD_ENV_FLAGS Signed-off-by: Simon Glass <sjg@chromium.org>
2017-05-17 09:25:14 +00:00
config CMD_ENV_FLAGS
bool "env flags -print variables that have non-default flags"
help
Some environment variables have special flags that control their
behaviour. For example, serial# can only be written once and cannot
be deleted. This command shows the variables that have special
flags.
cmd: env: add "-e" option for handling UEFI variables "env [print|set] -e" allows for handling uefi variables without knowing details about mapping to corresponding u-boot variables. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-02-25 06:54:36 +00:00
config CMD_NVEDIT_EFI
bool "env [set|print] -e - set/print UEFI variables"
depends on EFI_LOADER
imply HEXDUMP
help
UEFI variables are encoded as some form of U-Boot variables.
If enabled, we are allowed to set/print UEFI variables using
"env" command with "-e" option without knowing details.
cmd: nvedit: Add sub-command 'env info' Add sub-command 'env info' to display environment information: - env_valid : is environment valid - env_ready : is environment imported into hash table - env_use_default : is default environment using This command can be optionally used for evaluation in scripts: [-d] : evaluate whether default environment is used [-p] : evaluate whether environment can be persisted The result of multiple evaluations will be combined with AND. Signed-off-by: Leo Ruan <tingquan.ruan@cn.bosch.com> Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com> Reviewed-by: Simon Glass <sjg@chromium.org> [trini: Do not enable by default] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-05-24 15:20:19 +00:00
config CMD_NVEDIT_INFO
bool "env info - print or evaluate environment information"
help
Print environment information:
- env_valid : is environment valid
- env_ready : is environment imported into hash table
- env_use_default : is default environment used
This command can be optionally used for evaluation in scripts:
[-d] : evaluate whether default environment is used
[-p] : evaluate whether environment can be persisted
cmd: env: add option for quiet output on env info The "env info" can be use for test with -d and -p parameter, in scripting case the output of the command is not needed. This patch allows to deactivate this output with a new option "-q". For example, we can save the environment if default environment is used and persistent storage is managed with: if env info -p -d -q; then env save; fi Without the quiet option, I have the unnecessary traces First boot: Default environment is used Environment can be persisted Saving Environment to EXT4... File System is consistent Next boot: Environment was loaded from persistent storage Environment can be persisted Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2020-06-19 12:03:34 +00:00
[-q] : quiet output
cmd: nvedit: Add sub-command 'env info' Add sub-command 'env info' to display environment information: - env_valid : is environment valid - env_ready : is environment imported into hash table - env_use_default : is default environment using This command can be optionally used for evaluation in scripts: [-d] : evaluate whether default environment is used [-p] : evaluate whether environment can be persisted The result of multiple evaluations will be combined with AND. Signed-off-by: Leo Ruan <tingquan.ruan@cn.bosch.com> Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com> Reviewed-by: Simon Glass <sjg@chromium.org> [trini: Do not enable by default] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-05-24 15:20:19 +00:00
The result of multiple evaluations will be combined with AND.
cmd: env: add env load command Add the new command env load to load the environment from the current location gd->env_load_prio. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-07-28 09:51:20 +00:00
config CMD_NVEDIT_LOAD
bool "env load"
help
Load all environment variables from the compiled-in persistent
storage.
cmd: env: add env select command Add the new command 'env select' to force the persistent storage of environment, saved in gd->env_load_prio. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-07-28 09:51:21 +00:00
config CMD_NVEDIT_SELECT
bool "env select"
help
Select the compiled-in persistent storage of environment variables.
Move all command code into its own directory There are a lot of unrelated files in common, including all of the commands. Moving them into their own directory makes them easier to find and is more logical. Some commands include non-command code, such as cmd_scsi.c. This should be sorted out at some point so that the function can be enabled with or without the associated command. Unfortunately, with m68k I get this error: m68k: + M5329AFEE +arch/m68k/cpu/mcf532x/start.o: In function `_start': +arch/m68k/cpu/mcf532x/start.S:159:(.text+0x452): relocation truncated to fit: R_68K_PC16 against symbol `board_init_f' defined in .text.board_init_f section in common/built-in.o I hope someone can shed some light on what this means. I hope it isn't depending on the position of code in the image. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de> Acked-by: Stefan Roese <sr@denx.de> Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
2016-01-18 03:53:51 +00:00
endmenu
menu "Memory commands"
cmd: Add command for calculating binary operations This patch adds a command that enables the calculation of bit operations (AND, OR, XOR) on binary data from the command line. Memory locations as well as the contents of environment variables are eligible as sources and destination of the binary data used in the operations. The possible applications are manifold: Setting specific bits in registers using the regular read-OR-write pattern, masking out bits in bit values, implementation of simple OTP encryption using the XOR operation, etc. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-03-28 12:39:18 +00:00
config CMD_BINOP
bool "binop"
help
Compute binary operations (xor, or, and) of byte arrays of arbitrary
size from memory and store the result in memory or the environment.
bloblist: Add a command It is helpful to be able to see basic statistics about the bloblist and also to list its contents. Add a 'bloblist' command to handle this. Put the display functions in the bloblist modules rather than in the command code itself. That allows showing a list from SPL, where commands are not available. Also make bloblist_first/next_blob() static as they are not used outside this file. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-09-20 00:49:26 +00:00
config CMD_BLOBLIST
bool "bloblist"
default y if BLOBLIST
help
Show information about the bloblist, a collection of binary blobs
held in memory that persist between SPL and U-Boot. In the case of
x86 devices the bloblist can be used to hold ACPI tables so that they
remain available in memory.
Move all command code into its own directory There are a lot of unrelated files in common, including all of the commands. Moving them into their own directory makes them easier to find and is more logical. Some commands include non-command code, such as cmd_scsi.c. This should be sorted out at some point so that the function can be enabled with or without the associated command. Unfortunately, with m68k I get this error: m68k: + M5329AFEE +arch/m68k/cpu/mcf532x/start.o: In function `_start': +arch/m68k/cpu/mcf532x/start.S:159:(.text+0x452): relocation truncated to fit: R_68K_PC16 against symbol `board_init_f' defined in .text.board_init_f section in common/built-in.o I hope someone can shed some light on what this means. I hope it isn't depending on the position of code in the image. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de> Acked-by: Stefan Roese <sr@denx.de> Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
2016-01-18 03:53:51 +00:00
config CMD_CRC32
bool "crc32"
default y
Kconfig: Sort bool, default, select and imply options Fix Kconfig bool, default, select and imply options to be alphabetically sorted. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-07-23 13:55:13 +00:00
select HASH
Move all command code into its own directory There are a lot of unrelated files in common, including all of the commands. Moving them into their own directory makes them easier to find and is more logical. Some commands include non-command code, such as cmd_scsi.c. This should be sorted out at some point so that the function can be enabled with or without the associated command. Unfortunately, with m68k I get this error: m68k: + M5329AFEE +arch/m68k/cpu/mcf532x/start.o: In function `_start': +arch/m68k/cpu/mcf532x/start.S:159:(.text+0x452): relocation truncated to fit: R_68K_PC16 against symbol `board_init_f' defined in .text.board_init_f section in common/built-in.o I hope someone can shed some light on what this means. I hope it isn't depending on the position of code in the image. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de> Acked-by: Stefan Roese <sr@denx.de> Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
2016-01-18 03:53:51 +00:00
help
Compute CRC32.
Kconfig: Finish migration of hashing commands Currently these (board agnostic) commands cannot be selected using menuconfig and friends. Fix this the obvious way. As part of this, don't muddle the meaning of CONFIG_HASH_VERIFY to mean both 'hash -v' and "we have a hashing command" as this makes the Kconfig logic odd. Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> [trini: Re-apply, add imply for a few cases, run moveconfig.py, also migrate CRC32_VERIFY] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-05-19 16:26:58 +00:00
config CRC32_VERIFY
bool "crc32 -v"
depends on CMD_CRC32
help
Add -v option to verify data against a crc32 checksum.
Convert CONFIG_CMD_EEPROM et al to Kconfig This converts the following to Kconfig: CONFIG_CMD_EEPROM CONFIG_CMD_EEPROM_LAYOUT CONFIG_EEPROM_LAYOUT_HELP_STRING Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com> [trini: Rework Kconfig logic slightly, define EEPROM location on TI eval platforms] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-05-17 09:25:10 +00:00
config CMD_EEPROM
bool "eeprom - EEPROM subsystem"
help
(deprecated, needs conversion to driver model)
Provides commands to read and write EEPROM (Electrically Erasable
Programmable Read Only Memory) chips that are connected over an
I2C bus.
config CMD_EEPROM_LAYOUT
bool "Enable layout-aware eeprom commands"
depends on CMD_EEPROM
help
(deprecated, needs conversion to driver model)
When enabled, additional eeprom sub-commands become available.
eeprom print - prints the contents of the eeprom in a human-readable
way (eeprom layout fields, and data formatted to be fit for human
consumption).
eeprom update - allows user to update eeprom fields by specifying
the field name, and providing the new data in a human readable format
(same format as displayed by the eeprom print command).
Both commands can either auto detect the layout, or be told which
layout to use.
Feature API:
__weak int parse_layout_version(char *str)
- override to provide your own layout name parsing
__weak void __eeprom_layout_assign(struct eeprom_layout *layout,
int layout_version);
- override to setup the layout metadata based on the version
__weak int eeprom_layout_detect(unsigned char *data)
- override to provide your own algorithm for detecting layout
version
eeprom_field.c
- contains various printing and updating functions for common
types of eeprom fields. Can be used for defining
custom layouts.
config EEPROM_LAYOUT_HELP_STRING
string "Tells user what layout names are supported"
depends on CMD_EEPROM_LAYOUT
default "<not defined>"
help
Help printed with the LAYOUT VERSIONS part of the 'eeprom'
command's help.
Kconfig: Sort the memory commands These are currently not quite in alphabetical order. Before adding more, sort them. Not all options have a CMD_ prefix, so ignore that when sorting. Signed-off-by: Simon Glass <sjg@chromium.org> Suggested-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-08-04 22:34:51 +00:00
config LOOPW
bool "loopw"
help
Infinite write loop on address range
Kconfig: introduce md5sum command selection So far CONFIG_MD5SUM would need to be set by a board's include file. Since the command is really generic, move it over to Kconfig to allow it to be defined by either a board's defconfig, menuconfig or some config snippet merged via mergeconfig.sh. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-03-15 01:19:05 +00:00
config CMD_MD5SUM
bool "md5sum"
default n
select MD5
help
Compute MD5 checksum.
Kconfig: Finish migration of hashing commands Currently these (board agnostic) commands cannot be selected using menuconfig and friends. Fix this the obvious way. As part of this, don't muddle the meaning of CONFIG_HASH_VERIFY to mean both 'hash -v' and "we have a hashing command" as this makes the Kconfig logic odd. Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> [trini: Re-apply, add imply for a few cases, run moveconfig.py, also migrate CRC32_VERIFY] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-05-19 16:26:58 +00:00
config MD5SUM_VERIFY
Kconfig: introduce md5sum command selection So far CONFIG_MD5SUM would need to be set by a board's include file. Since the command is really generic, move it over to Kconfig to allow it to be defined by either a board's defconfig, menuconfig or some config snippet merged via mergeconfig.sh. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-03-15 01:19:05 +00:00
bool "md5sum -v"
default n
depends on CMD_MD5SUM
help
Add -v option to verify data against an MD5 checksum.
Kconfig: Sort the memory commands These are currently not quite in alphabetical order. Before adding more, sort them. Not all options have a CMD_ prefix, so ignore that when sorting. Signed-off-by: Simon Glass <sjg@chromium.org> Suggested-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-08-04 22:34:51 +00:00
config CMD_MEMINFO
bool "meminfo"
Kconfig: Finish migration of hashing commands Currently these (board agnostic) commands cannot be selected using menuconfig and friends. Fix this the obvious way. As part of this, don't muddle the meaning of CONFIG_HASH_VERIFY to mean both 'hash -v' and "we have a hashing command" as this makes the Kconfig logic odd. Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> [trini: Re-apply, add imply for a few cases, run moveconfig.py, also migrate CRC32_VERIFY] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-05-19 16:26:58 +00:00
help
Kconfig: Sort the memory commands These are currently not quite in alphabetical order. Before adding more, sort them. Not all options have a CMD_ prefix, so ignore that when sorting. Signed-off-by: Simon Glass <sjg@chromium.org> Suggested-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-08-04 22:34:51 +00:00
Display memory information.
Kconfig: Finish migration of hashing commands Currently these (board agnostic) commands cannot be selected using menuconfig and friends. Fix this the obvious way. As part of this, don't muddle the meaning of CONFIG_HASH_VERIFY to mean both 'hash -v' and "we have a hashing command" as this makes the Kconfig logic odd. Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> [trini: Re-apply, add imply for a few cases, run moveconfig.py, also migrate CRC32_VERIFY] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-05-19 16:26:58 +00:00
Kconfig: Sort the memory commands These are currently not quite in alphabetical order. Before adding more, sort them. Not all options have a CMD_ prefix, so ignore that when sorting. Signed-off-by: Simon Glass <sjg@chromium.org> Suggested-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-08-04 22:34:51 +00:00
config CMD_MEMORY
bool "md, mm, nm, mw, cp, cmp, base, loop"
default y
Move all command code into its own directory There are a lot of unrelated files in common, including all of the commands. Moving them into their own directory makes them easier to find and is more logical. Some commands include non-command code, such as cmd_scsi.c. This should be sorted out at some point so that the function can be enabled with or without the associated command. Unfortunately, with m68k I get this error: m68k: + M5329AFEE +arch/m68k/cpu/mcf532x/start.o: In function `_start': +arch/m68k/cpu/mcf532x/start.S:159:(.text+0x452): relocation truncated to fit: R_68K_PC16 against symbol `board_init_f' defined in .text.board_init_f section in common/built-in.o I hope someone can shed some light on what this means. I hope it isn't depending on the position of code in the image. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de> Acked-by: Stefan Roese <sr@denx.de> Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
2016-01-18 03:53:51 +00:00
help
Kconfig: Sort the memory commands These are currently not quite in alphabetical order. Before adding more, sort them. Not all options have a CMD_ prefix, so ignore that when sorting. Signed-off-by: Simon Glass <sjg@chromium.org> Suggested-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-08-04 22:34:51 +00:00
Memory commands.
md - memory display
mm - memory modify (auto-incrementing address)
nm - memory modify (constant address)
mw - memory write (fill)
cp - memory copy
cmp - memory compare
base - print or set address offset
loop - initialize loop on address range
Move all command code into its own directory There are a lot of unrelated files in common, including all of the commands. Moving them into their own directory makes them easier to find and is more logical. Some commands include non-command code, such as cmd_scsi.c. This should be sorted out at some point so that the function can be enabled with or without the associated command. Unfortunately, with m68k I get this error: m68k: + M5329AFEE +arch/m68k/cpu/mcf532x/start.o: In function `_start': +arch/m68k/cpu/mcf532x/start.S:159:(.text+0x452): relocation truncated to fit: R_68K_PC16 against symbol `board_init_f' defined in .text.board_init_f section in common/built-in.o I hope someone can shed some light on what this means. I hope it isn't depending on the position of code in the image. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de> Acked-by: Stefan Roese <sr@denx.de> Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
2016-01-18 03:53:51 +00:00
cmd: Update the memory-search command Add various fixes and improvements to this command that were missed in the original version. Unfortunately I forgot to send v2. - Fix Kconfig name - Use a separate variable for the remaining search length - Correct a minor bug - Move into a separate test suite - Add -q flag to the 'quiet' test to test operation when console is enabled - Enable the feature for sandbox Signed-off-by: Simon Glass <sjg@chromium.org>
2020-07-29 01:41:14 +00:00
config CMD_MEM_SEARCH
cmd: Add a memory-search command It is useful to be able to find hex values and strings in a memory range. Add a command to support this. cmd: Fix 'md' and add a memory-search command At present 'md.q' is broken. This series provides a fix for this. It also implements a new memory-search command called 'ms'. It allows searching memory for hex and string data. END Signed-off-by: Simon Glass <sjg@chromium.org>
2020-06-03 01:26:49 +00:00
bool "ms - Memory search"
help
Memory-search command
This allows searching through a region of memory looking for hex
data (byte, 16-bit word, 32-bit long, also 64-bit on machines that
support it). It is also possible to search for a string. The
command accepts a memory range and a list of values to search for.
The values need to appear in memory in the same order they are given
in the command. At most 10 matches can be returned at a time, but
pressing return will show the next 10 matches. Environment variables
are set for use with scripting (memmatches, memaddr, mempos).
cmd: mdc/mwc: normalize disjoint MX_CYCLIC usage Both CMD_MX_CYCLIC and MX_CYCLIC are in use and defined in Kconfig, but only the non-CMD version currently does anything. This changes all usages to prefer the CMD_MX_CYCLIC option (since it's only affecting addition of the commands), and switches defconfigs using the non-CMD version to use the CMD version. Signed-off-by: Joel Johnson <mrjoel@lixil.net> Reviewed-by: Tom Rini <trini@konsulko.com>
2020-01-29 16:17:18 +00:00
config CMD_MX_CYCLIC
Convert CONFIG_MX_CYCLIC to Kconfig This converts the following to Kconfig: CONFIG_MX_CYCLIC Signed-off-by: Adam Ford <aford173@gmail.com> Acked-by: David Lechner <david@lechnology.com>
2019-08-14 12:54:34 +00:00
bool "Enable cyclic md/mw commands"
depends on CMD_MEMORY
help
Add the "mdc" and "mwc" memory commands. These are cyclic
"md/mw" commands.
Examples:
=> mdc.b 10 4 500
This command will print 4 bytes (10,11,12,13) each 500 ms.
=> mwc.l 100 12345678 10
This command will write 12345678 to address 100 all 10 ms.
cmd: mem: Add a command to fill the memory with random data This command fills the memory with data produced by rand(). Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2019-07-02 12:23:26 +00:00
config CMD_RANDOM
bool "random"
default y
depends on CMD_MEMORY && (LIB_RAND || LIB_HW_RAND)
help
random - fill memory with random data
Move all command code into its own directory There are a lot of unrelated files in common, including all of the commands. Moving them into their own directory makes them easier to find and is more logical. Some commands include non-command code, such as cmd_scsi.c. This should be sorted out at some point so that the function can be enabled with or without the associated command. Unfortunately, with m68k I get this error: m68k: + M5329AFEE +arch/m68k/cpu/mcf532x/start.o: In function `_start': +arch/m68k/cpu/mcf532x/start.S:159:(.text+0x452): relocation truncated to fit: R_68K_PC16 against symbol `board_init_f' defined in .text.board_init_f section in common/built-in.o I hope someone can shed some light on what this means. I hope it isn't depending on the position of code in the image. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de> Acked-by: Stefan Roese <sr@denx.de> Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
2016-01-18 03:53:51 +00:00
config CMD_MEMTEST
bool "memtest"
help
Simple RAM read/write test.
treewide: Migrate CONFIG_SYS_ALT_MEMTEST to Kconfig Migrate the CONFIG_SYS_ALT_MEMTEST option to Kconfig. Signed-off-by: Mario Six <mario.six@gdsys.cc> [trini: Re-run migration after also including CMD_MEMTEST] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-03-28 12:38:14 +00:00
if CMD_MEMTEST
config SYS_ALT_MEMTEST
bool "Alternative test"
help
Use a more complete alternative memory test.
cmd: mem: fix range of bitflip test The bitflip test uses two equal sized memory buffers. This is achieved by splitting the range of memory into two pieces. The address of the second buffer, as well as the length of each buffer, were not correctly calculated. This caused bitflip test to access beyond the end of range. This patch fixes the pointer arithmetic problem. A second problem arises because u-boot "mtest" command expects the ending address to be inclusive. When computing (end - start) this results in missing 1 byte of the requested length. The bitflip test expects a count rather than an "ending" address. Thus it fails to test the last word of the requested range. Fixed by using (end - start + 1). Added Kconfig option to optionally disable the bitflip test, since it does add significantly to the time taken for "mtest". Fixes: 8e434cb705d463bc8cff935160e4fb4c77cb99ab ("cmd: mem: Add bitflip memory test to alternate mtest") Signed-off-by: Ralph Siemsen <ralph.siemsen@linaro.org> Reviewed-by: Stefan Roese <sr@denx.de>
2020-09-09 16:10:00 +00:00
if SYS_ALT_MEMTEST
config SYS_ALT_MEMTEST_BITFLIP
bool "Bitflip test"
default y
help
The alternative memory test includes bitflip test since 2020.07.
The bitflip test significantly increases the overall test time.
Bitflip test can optionally be disabled here.
endif
treewide: mem: Move mtest related defines to Kconfig Move below defines which are used by mtest utility to Kconfig. CONFIG_SYS_MEMTEST_START CONFIG_SYS_MEMTEST_END Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> [trini: Fix kmcoge5ne board, re-run migration as well] Signed-off-by: Tom Rini <trini@konsulko.com>
2020-05-04 13:26:21 +00:00
config SYS_MEMTEST_START
hex "default start address for mtest"
default 0
help
This is the default start address for mtest for simple read/write
test. If no arguments are given to mtest, default address is used
as start address.
config SYS_MEMTEST_END
hex "default end address for mtest"
default 0x1000
help
This is the default end address for mtest for simple read/write
test. If no arguments are given to mtest, default address is used
as end address.
treewide: Migrate CONFIG_SYS_ALT_MEMTEST to Kconfig Migrate the CONFIG_SYS_ALT_MEMTEST option to Kconfig. Signed-off-by: Mario Six <mario.six@gdsys.cc> [trini: Re-run migration after also including CMD_MEMTEST] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-03-28 12:38:14 +00:00
endif
Kconfig: Sort the memory commands These are currently not quite in alphabetical order. Before adding more, sort them. Not all options have a CMD_ prefix, so ignore that when sorting. Signed-off-by: Simon Glass <sjg@chromium.org> Suggested-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-08-04 22:34:51 +00:00
config CMD_SHA1SUM
bool "sha1sum"
select SHA1
Move all command code into its own directory There are a lot of unrelated files in common, including all of the commands. Moving them into their own directory makes them easier to find and is more logical. Some commands include non-command code, such as cmd_scsi.c. This should be sorted out at some point so that the function can be enabled with or without the associated command. Unfortunately, with m68k I get this error: m68k: + M5329AFEE +arch/m68k/cpu/mcf532x/start.o: In function `_start': +arch/m68k/cpu/mcf532x/start.S:159:(.text+0x452): relocation truncated to fit: R_68K_PC16 against symbol `board_init_f' defined in .text.board_init_f section in common/built-in.o I hope someone can shed some light on what this means. I hope it isn't depending on the position of code in the image. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de> Acked-by: Stefan Roese <sr@denx.de> Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
2016-01-18 03:53:51 +00:00
help
Kconfig: Sort the memory commands These are currently not quite in alphabetical order. Before adding more, sort them. Not all options have a CMD_ prefix, so ignore that when sorting. Signed-off-by: Simon Glass <sjg@chromium.org> Suggested-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-08-04 22:34:51 +00:00
Compute SHA1 checksum.
config SHA1SUM_VERIFY
bool "sha1sum -v"
depends on CMD_SHA1SUM
help
Add -v option to verify data against a SHA1 checksum.
Move all command code into its own directory There are a lot of unrelated files in common, including all of the commands. Moving them into their own directory makes them easier to find and is more logical. Some commands include non-command code, such as cmd_scsi.c. This should be sorted out at some point so that the function can be enabled with or without the associated command. Unfortunately, with m68k I get this error: m68k: + M5329AFEE +arch/m68k/cpu/mcf532x/start.o: In function `_start': +arch/m68k/cpu/mcf532x/start.S:159:(.text+0x452): relocation truncated to fit: R_68K_PC16 against symbol `board_init_f' defined in .text.board_init_f section in common/built-in.o I hope someone can shed some light on what this means. I hope it isn't depending on the position of code in the image. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de> Acked-by: Stefan Roese <sr@denx.de> Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
2016-01-18 03:53:51 +00:00
Convert CONFIG_CMD_STRINGS to Kconfig This converts the following to Kconfig: CONFIG_CMD_STRINGS Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-08-04 22:34:52 +00:00
config CMD_STRINGS
bool "strings - display strings in memory"
help
This works similarly to the Unix 'strings' command except that it
works with a memory range. String of printable characters found
within the range are displayed. The minimum number of characters
for a sequence to be considered a string can be provided.
Convert CONFIG_CMD_LZMADEC to Kconfig This converts the following to Kconfig: CONFIG_CMD_LZMADEC Signed-off-by: Simon Glass <sjg@chromium.org>
2017-05-17 09:25:43 +00:00
endmenu
menu "Compression commands"
config CMD_LZMADEC
bool "lzmadec"
cmd: Make CMD_LZMA / CMD_UNZIP default y if CMD_BOOTI In the Linux Kernel on ARM64, the Image.COMPRESSION file is not self-extracting in the way that x86 and ARM images are. So when CMD_BOOTI is enabled we should also default to enabling CMD_UNZIP and CONFIG_LZMA in order for the user to be able to decompress many of the common compressions that will be done to an Image file. Signed-off-by: Tom Rini <trini@konsulko.com>
2017-09-29 18:32:44 +00:00
default y if CMD_BOOTI
Convert CONFIG_CMD_LZMADEC to Kconfig This converts the following to Kconfig: CONFIG_CMD_LZMADEC Signed-off-by: Simon Glass <sjg@chromium.org>
2017-05-17 09:25:43 +00:00
select LZMA
help
Support decompressing an LZMA (Lempel-Ziv-Markov chain algorithm)
image from memory.
cmd: Add unlz4 command This command is a new command called "unlz4" that decompresses from memory into memory. Used with the CONFIG_CMD_UNLZ4 optionenabled. Signed-off-by: Yusuke Ashiduka <ashiduka@fujitsu.com> [trini: Use %zd / %zX not %ld / %lX in printf] Signed-off-by: Tom Rini <trini@konsulko.com>
2020-02-20 11:48:01 +00:00
config CMD_UNLZ4
bool "unlz4"
default y if CMD_BOOTI
select LZ4
help
Support decompressing an LZ4 image from memory region.
cmd: move CONFIG_CMD_UNZIP and CONFIG_CMD_ZIP to Kconfig CONFIG_CMD_ZIP is not defined by any board. I am moving CONFIG_CMD_UNZIP to defconfig files except UniPhier SoC family. I am the maintainer of UniPhier platform, so I know "select CMD_UNZIP" is better for this platform. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Stefan Roese <sr@denx.de> Acked-by: Ryan Harkin <ryan.harkin@linaro.org> Tested-by: Ryan Harkin <ryan.harkin@linaro.org>
2017-02-05 01:42:56 +00:00
config CMD_UNZIP
bool "unzip"
cmd: Make CMD_LZMA / CMD_UNZIP default y if CMD_BOOTI In the Linux Kernel on ARM64, the Image.COMPRESSION file is not self-extracting in the way that x86 and ARM images are. So when CMD_BOOTI is enabled we should also default to enabling CMD_UNZIP and CONFIG_LZMA in order for the user to be able to decompress many of the common compressions that will be done to an Image file. Signed-off-by: Tom Rini <trini@konsulko.com>
2017-09-29 18:32:44 +00:00
default y if CMD_BOOTI
cmd: unzip: automatically select CONFIG_GZIP unzip calls gzwrite() which is provided in lib/gunzip.c. Make sure it is automatically pulled in if the user selects CMD_UNZIP. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Heinrich Schuchardt <xypron.glkp@gmx.de>
2020-05-22 12:07:35 +00:00
select GZIP
cmd: move CONFIG_CMD_UNZIP and CONFIG_CMD_ZIP to Kconfig CONFIG_CMD_ZIP is not defined by any board. I am moving CONFIG_CMD_UNZIP to defconfig files except UniPhier SoC family. I am the maintainer of UniPhier platform, so I know "select CMD_UNZIP" is better for this platform. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Stefan Roese <sr@denx.de> Acked-by: Ryan Harkin <ryan.harkin@linaro.org> Tested-by: Ryan Harkin <ryan.harkin@linaro.org>
2017-02-05 01:42:56 +00:00
help
Uncompress a zip-compressed memory region.
config CMD_ZIP
bool "zip"
cmd: zip: automatically pull in gzip() Move the CONFIG_GZIP_COMPRESSED from a config.h macro to a Kconfig menu item. It is not selectable by a user because there is no reason to do so. Instead it will be automatically selected by the stuff which uses gzip(), like the zip command. Remove it from the config_whitelist.txt. Also remove CONFIG_GZIP_COMPRESS_DEF_SZ as this was never used on any board. The default seems to be sane, otherwise it should be added as a Kconfig option. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-05-22 12:07:36 +00:00
select GZIP_COMPRESSED
cmd: move CONFIG_CMD_UNZIP and CONFIG_CMD_ZIP to Kconfig CONFIG_CMD_ZIP is not defined by any board. I am moving CONFIG_CMD_UNZIP to defconfig files except UniPhier SoC family. I am the maintainer of UniPhier platform, so I know "select CMD_UNZIP" is better for this platform. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Stefan Roese <sr@denx.de> Acked-by: Ryan Harkin <ryan.harkin@linaro.org> Tested-by: Ryan Harkin <ryan.harkin@linaro.org>
2017-02-05 01:42:56 +00:00
help
Compress a memory region with zlib deflate method.
Move all command code into its own directory There are a lot of unrelated files in common, including all of the commands. Moving them into their own directory makes them easier to find and is more logical. Some commands include non-command code, such as cmd_scsi.c. This should be sorted out at some point so that the function can be enabled with or without the associated command. Unfortunately, with m68k I get this error: m68k: + M5329AFEE +arch/m68k/cpu/mcf532x/start.o: In function `_start': +arch/m68k/cpu/mcf532x/start.S:159:(.text+0x452): relocation truncated to fit: R_68K_PC16 against symbol `board_init_f' defined in .text.board_init_f section in common/built-in.o I hope someone can shed some light on what this means. I hope it isn't depending on the position of code in the image. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de> Acked-by: Stefan Roese <sr@denx.de> Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
2016-01-18 03:53:51 +00:00
endmenu
menu "Device access commands"
Kconfig: Sort the device-access commands These are currently not quite in alphabetical order. Before adding more, sort them. Signed-off-by: Simon Glass <sjg@chromium.org> Suggested-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-08-04 22:34:28 +00:00
config CMD_ARMFLASH
#depends on FLASH_CFI_DRIVER
bool "armflash"
help
ARM Ltd reference designs flash partition access
cmd: add ADC cli commands Add an 'adc' cli command to get information from adc devices and to read "single shot" data. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-04-27 13:17:57 +00:00
config CMD_ADC
bool "adc - Access Analog to Digital Converters info and data"
select ADC
cmd: Kconfig: Change dependency for CMD_ADC CMD_ADC selected DM_REGULATOR unconditionally without enabling DM. That's why change select to depends on to cover it. Kconfig is showing this issue as: WARNING: unmet direct dependencies detected for REGMAP Depends on [n]: DM [=n] Selected by [y]: - DM_REGULATOR_PBIAS [=y] && DM_REGULATOR [=y] Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Tom Rini <trini@konsulko.com> [trini: Update CMD_ADC=y configs to enable DM_REGULATOR now] Signed-off-by: Tom Rini <trini@konsulko.com>
2020-08-19 08:44:17 +00:00
depends on DM_REGULATOR
cmd: add ADC cli commands Add an 'adc' cli command to get information from adc devices and to read "single shot" data. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-04-27 13:17:57 +00:00
help
Shows ADC device info and permit printing one-shot analog converted
data from a named Analog to Digital Converter.
cmd: Add 'bcb' command to read/modify/write BCB fields 'Bootloader Control Block' (BCB) is a well established term/acronym in the Android namespace which refers to a location in a dedicated raw (i.e. FS-unaware) flash (e.g. eMMC) partition, usually called "misc", which is used as media for exchanging messages between Android userspace (particularly recovery [1]) and an Android-capable bootloader. On higher level, this allows implementing a subset of Android Bootloader Requirements [2], amongst which is the Android-specific bootloader flow [3]. Regardless how the latter is implemented in U-Boot ([3] being the most memorable example), reading/writing/dumping the BCB fields in the development process from inside the U-Boot is a convenient feature. Hence, make it available to the users. Some usage examples of the new command recorded on R-Car H3ULCB-KF ('>>>' is an overlay on top of the original console output): => bcb bcb - Load/set/clear/test/dump/store Android BCB fields Usage: bcb load <dev> <part> - load BCB from mmc <dev>:<part> bcb set <field> <val> - set BCB <field> to <val> bcb clear [<field>] - clear BCB <field> or all fields bcb test <field> <op> <val> - test BCB <field> against <val> bcb dump <field> - dump BCB <field> bcb store - store BCB back to mmc Legend: <dev> - MMC device index containing the BCB partition <part> - MMC partition index or name containing the BCB <field> - one of {command,status,recovery,stage,reserved} <op> - the binary operator used in 'bcb test': '=' returns true if <val> matches the string stored in <field> '~' returns true if <val> matches a subset of <field>'s string <val> - string/text provided as input to bcb {set,test} NOTE: any ':' character in <val> will be replaced by line feed during 'bcb set' and used as separator by upper layers => bcb dump command Error: Please, load BCB first! >>> Users must specify mmc device and partition before any other call => bcb load 1 misc => bcb load 1 1 >>> The two calls are equivalent (assuming "misc" has index 1) => bcb dump command 00000000: 62 6f 6f 74 6f 6e 63 65 2d 73 68 65 6c 6c 00 72 bootonce-shell.r 00000010: 79 00 72 00 00 00 00 00 00 00 00 00 00 00 00 00 y.r............. >>> The output is in binary/string format for convenience >>> The output size matches the size of inspected BCB field >>> (32 bytes in case of 'command') => bcb test command = bootonce-shell && echo true true => bcb test command = bootonce-shell- && echo true => bcb test command = bootonce-shel && echo true >>> The '=' operator returns 'true' on perfect match => bcb test command ~ bootonce-shel && echo true true => bcb test command ~ bootonce-shell && echo true true >>> The '~' operator returns 'true' on substring match => bcb set command recovery => bcb dump command 00000000: 72 65 63 6f 76 65 72 79 00 73 68 65 6c 6c 00 72 recovery.shell.r 00000010: 79 00 72 00 00 00 00 00 00 00 00 00 00 00 00 00 y.r............. >>> The new value is NULL-terminated and stored in the BCB field => bcb set recovery "msg1:msg2:msg3" => bcb dump recovery 00000040: 6d 73 67 31 0a 6d 73 67 32 0a 6d 73 67 33 00 00 msg1.msg2.msg3.. 00000050: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00000060: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ >>> --- snip --- >>> Every ':' is replaced by line-feed '\n' (0xA). The latter is used >>> as separator between individual commands by Android userspace => bcb store >>> Flush/store the BCB structure to MMC [1] https://android.googlesource.com/platform/bootable/recovery [2] https://source.android.com/devices/bootloader [3] https://patchwork.ozlabs.org/patch/746835/ ("[U-Boot,5/6] Initial support for the Android Bootloader flow") Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
2019-05-23 15:32:22 +00:00
config CMD_BCB
bool "bcb"
depends on MMC
depends on PARTITIONS
help
Read/modify/write the fields of Bootloader Control Block, usually
stored on the flash "misc" partition with its structure defined in:
https://android.googlesource.com/platform/bootable/recovery/+/master/
bootloader_message/include/bootloader_message/bootloader_message.h
Some real-life use-cases include (but are not limited to):
- Determine the "boot reason" (and act accordingly):
https://source.android.com/devices/bootloader/boot-reason
- Get/pass a list of commands from/to recovery:
https://android.googlesource.com/platform/bootable/recovery
- Inspect/dump the contents of the BCB fields
cmd: Add bind/unbind commands to bind a device to a driver from the command line In some cases it can be useful to be able to bind a device to a driver from the command line. The obvious example is for versatile devices such as USB gadget. Another use case is when the devices are not yet ready at startup and require some setup before the drivers are bound (ex: FPGA which bitsream is fetched from a mass storage or ethernet) usage example: bind usb_dev_generic 0 usb_ether unbind usb_dev_generic 0 usb_ether or unbind eth 1 bind /ocp/omap_dwc3@48380000/usb@48390000 usb_ether unbind /ocp/omap_dwc3@48380000/usb@48390000 Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2018-08-09 14:17:46 +00:00
config CMD_BIND
bool "bind/unbind - Bind or unbind a device to/from a driver"
depends on DM
help
Bind or unbind a device to/from a driver from the command line.
This is useful in situations where a device may be handled by several
drivers. For example, this can be used to bind a UDC to the usb ether
gadget driver from the command line.
Convert CONFIG_CMD_CLK to Kconfig This converts the following to Kconfig: CONFIG_CMD_CLK Signed-off-by: Simon Glass <sjg@chromium.org> [trini: imply CMD_CLK on ARCH_ZYNQ] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-04-27 04:28:02 +00:00
config CMD_CLK
bool "clk - Show clock frequencies"
help
(deprecated)
Shows clock frequences by calling a sock_clk_dump() hook function.
This is depreated in favour of using the CLK uclass and accessing
clock values from associated drivers. However currently no command
exists for this.
Kconfig: Sort the device-access commands These are currently not quite in alphabetical order. Before adding more, sort them. Signed-off-by: Simon Glass <sjg@chromium.org> Suggested-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-08-04 22:34:28 +00:00
config CMD_DEMO
bool "demo - Demonstration commands for driver model"
depends on DM
help
Provides a 'demo' command which can be used to play around with
driver model. To use this properly you will need to enable one or
both of the demo devices (DM_DEMO_SHAPE and DM_DEMO_SIMPLE).
Otherwise you will always get an empty list of devices. The demo
devices are defined in the sandbox device tree, so the easiest
option is to use sandbox and pass the -d point to sandbox's
u-boot.dtb file.
config CMD_DFU
bool "dfu"
dfu: Fix up the Kconfig mess Clean up the screaming mess of configuration options that DFU is. It was impossible to configure DFU such that TFTP is enabled and USB is not, this patch fixes that and assures that DFU TFTP and DFU USB can be enabled separatelly and that the correct pieces of code are compiled in. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Lukasz Majewski <lukma@denx.de>
2018-02-16 15:41:17 +00:00
select DFU
Kconfig: Sort the device-access commands These are currently not quite in alphabetical order. Before adding more, sort them. Signed-off-by: Simon Glass <sjg@chromium.org> Suggested-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-08-04 22:34:28 +00:00
help
Enables the command "dfu" which is used to have U-Boot create a DFU
README: Drop information about commands Most of this is duplicated in Kconfig help. Add some of that which is not, and remove the help from the README. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-08-04 22:35:06 +00:00
class device via USB. This command requires that the "dfu_alt_info"
environment variable be set and define the alt settings to expose to
the host.
Kconfig: Sort the device-access commands These are currently not quite in alphabetical order. Before adding more, sort them. Signed-off-by: Simon Glass <sjg@chromium.org> Suggested-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-08-04 22:34:28 +00:00
Move all command code into its own directory There are a lot of unrelated files in common, including all of the commands. Moving them into their own directory makes them easier to find and is more logical. Some commands include non-command code, such as cmd_scsi.c. This should be sorted out at some point so that the function can be enabled with or without the associated command. Unfortunately, with m68k I get this error: m68k: + M5329AFEE +arch/m68k/cpu/mcf532x/start.o: In function `_start': +arch/m68k/cpu/mcf532x/start.S:159:(.text+0x452): relocation truncated to fit: R_68K_PC16 against symbol `board_init_f' defined in .text.board_init_f section in common/built-in.o I hope someone can shed some light on what this means. I hope it isn't depending on the position of code in the image. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de> Acked-by: Stefan Roese <sr@denx.de> Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
2016-01-18 03:53:51 +00:00
config CMD_DM
bool "dm - Access to driver model information"
depends on DM
help
Provides access to driver model data structures and information,
such as a list of devices, list of uclasses and the state of each
device (e.g. activated). This is not required for operation, but
can be useful to see the state of driver model for debugging or
interest.
fastboot: Move fastboot to drivers/fastboot Separate CMD_FASTBOOT from FASTBOOT and move code and configuration to drivers/fastboot. Switch dependencies on FASTBOOT to USB_FUNCTION_FASTBOOT as anyone who wants FASTBOOT before this series wants USB_FUNCTION_FASTBOOT. Split USB_FUNCTION_FASTBOOT from FASTBOOT so they retain their existing behaviour. Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-05-29 15:30:39 +00:00
config CMD_FASTBOOT
bool "fastboot - Android fastboot support"
depends on FASTBOOT
help
This enables the command "fastboot" which enables the Android
fastboot mode for the platform. Fastboot is a protocol for
downloading images, flashing and device control used on
net: fastboot: Merge AOSP UDP fastboot Merge UDP fastboot support from AOSP: https://android.googlesource.com/platform/external/u-boot/+/android-o-mr1-iot-preview-8 Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com> Signed-off-by: Alex Deymo <deymo@google.com> Signed-off-by: Jocelyn Bohr <bohr@google.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-05-29 15:30:53 +00:00
Android devices. Fastboot requires either the network stack
enabled or support for acting as a USB device.
fastboot: Move fastboot to drivers/fastboot Separate CMD_FASTBOOT from FASTBOOT and move code and configuration to drivers/fastboot. Switch dependencies on FASTBOOT to USB_FUNCTION_FASTBOOT as anyone who wants FASTBOOT before this series wants USB_FUNCTION_FASTBOOT. Split USB_FUNCTION_FASTBOOT from FASTBOOT so they retain their existing behaviour. Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-05-29 15:30:39 +00:00
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-24 15:53:44 +00:00
See doc/android/fastboot.rst for more information.
fastboot: Move fastboot to drivers/fastboot Separate CMD_FASTBOOT from FASTBOOT and move code and configuration to drivers/fastboot. Switch dependencies on FASTBOOT to USB_FUNCTION_FASTBOOT as anyone who wants FASTBOOT before this series wants USB_FUNCTION_FASTBOOT. Split USB_FUNCTION_FASTBOOT from FASTBOOT so they retain their existing behaviour. Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-05-29 15:30:39 +00:00
Kconfig: Sort the device-access commands These are currently not quite in alphabetical order. Before adding more, sort them. Signed-off-by: Simon Glass <sjg@chromium.org> Suggested-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-08-04 22:34:28 +00:00
config CMD_FLASH
bool "flinfo, erase, protect"
default y
cmd: make MTD commands depend on MTD Defconfigs have been fixed, now we can add proper dependencies in Kconfig. SPI FLASH is still not dependent on MTD (deeper rework needed). Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-10-25 17:39:30 +00:00
depends on MTD || FLASH_CFI_DRIVER || MTD_NOR_FLASH
Kconfig: Sort the device-access commands These are currently not quite in alphabetical order. Before adding more, sort them. Signed-off-by: Simon Glass <sjg@chromium.org> Suggested-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-08-04 22:34:28 +00:00
help
NOR flash support.
flinfo - print FLASH memory information
erase - FLASH memory
protect - enable or disable FLASH write protection
config CMD_FPGA
bool "fpga"
cmd: Make CONFIG_CMD_FPGA depend on CONFIG_FPGA cmd/Makefile has: ifdef CONFIG_FPGA obj-$(CONFIG_CMD_FPGA) += fpga.o endif which means that if CONFIG_FPGA is not set, CONFIG_CMD_FPGA silently does nothing. Let's remove that Makefile conditional and instead express this equivalent dependency in Kconfig, so a lot of redundant # CONFIG_CMD_FPGA is not set can be removed from board defconfigs that don't actually have an FPGA. Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com>
2018-01-27 18:28:40 +00:00
depends on FPGA
Kconfig: Sort the device-access commands These are currently not quite in alphabetical order. Before adding more, sort them. Signed-off-by: Simon Glass <sjg@chromium.org> Suggested-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-08-04 22:34:28 +00:00
default y
help
FPGA support.
config CMD_FPGA_LOADBP
bool "fpga loadbp - load partial bitstream (Xilinx only)"
depends on CMD_FPGA
help
Supports loading an FPGA device from a bitstream buffer containing
a partial bitstream.
config CMD_FPGA_LOADFS
bool "fpga loadfs - load bitstream from FAT filesystem (Xilinx only)"
depends on CMD_FPGA
help
Supports loading an FPGA device from a FAT filesystem.
config CMD_FPGA_LOADMK
bool "fpga loadmk - load bitstream from image"
depends on CMD_FPGA
help
Supports loading an FPGA device from a image generated by mkimage.
config CMD_FPGA_LOADP
bool "fpga loadp - load partial bitstream"
depends on CMD_FPGA
help
Supports loading an FPGA device from a bitstream buffer containing
a partial bitstream.
cmd: fpga: Add support to load secure bitstreams This patch adds support to load secure bitstreams(authenticated or encrypted or both). As of now, this feature is added and tested only for xilinx bitstreams and the secure bitstream was generated using xilinx bootgen tool, but the command is defined in more generic way. Command example to load authenticated and device key encrypted bitstream is as follows "fpga loads 0 100000 2000000 0 1" Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-05-31 09:40:22 +00:00
config CMD_FPGA_LOAD_SECURE
bool "fpga loads - loads secure bitstreams (Xilinx only)"
depends on CMD_FPGA
help
Enables the fpga loads command which is used to load secure
(authenticated or encrypted or both) bitstreams on to FPGA.
Kconfig: Sort the device-access commands These are currently not quite in alphabetical order. Before adding more, sort them. Signed-off-by: Simon Glass <sjg@chromium.org> Suggested-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-08-04 22:34:28 +00:00
config CMD_FPGAD
bool "fpgad - dump FPGA registers"
help
(legacy, needs conversion to driver model)
Provides a way to dump FPGA registers by calling the board-specific
fpga_get_reg() function. This functions similarly to the 'md'
command.
config CMD_FUSE
bool "fuse - support for the fuse subssystem"
help
(deprecated - needs conversion to driver model)
This allows reading, sensing, programming or overriding fuses
which control the behaviour of the device. The command uses the
fuse_...() API.
config CMD_GPIO
bool "gpio"
help
GPIO support.
cmd: Add a pwm command Add the command "pwm" for controlling the pwm channels. This command provides pwm invert/config/enable/disable functionalities via PWM uclass drivers Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-12-22 06:00:05 +00:00
config CMD_PWM
bool "pwm"
depends on DM_PWM
help
Control PWM channels, this allows invert/config/enable/disable PWM channels.
Kconfig: Sort the device-access commands These are currently not quite in alphabetical order. Before adding more, sort them. Signed-off-by: Simon Glass <sjg@chromium.org> Suggested-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-08-04 22:34:28 +00:00
config CMD_GPT
bool "GPT (GUID Partition Table) command"
select EFI_PARTITION
Move most CONFIG_HAVE_BLOCK_DEVICE to Kconfig config_fallbacks.h has some logic that sets HAVE_BLOCK_DEVICE based on a list of enabled options. Moving HAVE_BLOCK_DEVICE to Kconfig allows us to drastically shrink the logic in config_fallbacks.h Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Rename HAVE_BLOCK_DEVICE to CONFIG_BLOCK_DEVICE] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-02-06 18:43:56 +00:00
select HAVE_BLOCK_DEVICE
Kconfig: Sort bool, default, select and imply options Fix Kconfig bool, default, select and imply options to be alphabetically sorted. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-07-23 13:55:13 +00:00
select PARTITION_UUIDS
cmd: Move CONFIG_RANDOM_UUID to Kconfig CONFIG_RANDOM_UUID is used by the GPT command to generate random UUID when none are provided. Move that option to Kconfig. Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Jagan Teki <jagan@openedev.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-08-24 09:52:32 +00:00
imply RANDOM_UUID
Kconfig: Sort the device-access commands These are currently not quite in alphabetical order. Before adding more, sort them. Signed-off-by: Simon Glass <sjg@chromium.org> Suggested-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-08-04 22:34:28 +00:00
help
Enable the 'gpt' command to ready and write GPT style partition
tables.
cmd: Move CONFIG_RANDOM_UUID to Kconfig CONFIG_RANDOM_UUID is used by the GPT command to generate random UUID when none are provided. Move that option to Kconfig. Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Jagan Teki <jagan@openedev.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-08-24 09:52:32 +00:00
config RANDOM_UUID
bool "GPT Random UUID generation"
Convert LIB_UUID to Kconfig config_fallback.h has some logic that checks a variety of options and selects LIB_UUID if it hasn't already been selected. This will all LIB_UUID in Kconfig and select this option for the list of options to allow us to remove the logic from fallbacks Signed-off-by: Adam Ford <aford173@gmail.com>
2018-02-06 18:14:28 +00:00
select LIB_UUID
cmd: Move CONFIG_RANDOM_UUID to Kconfig CONFIG_RANDOM_UUID is used by the GPT command to generate random UUID when none are provided. Move that option to Kconfig. Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Jagan Teki <jagan@openedev.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-08-24 09:52:32 +00:00
help
Enable the generation of partitions with random UUIDs if none
are provided.
Kconfig: Sort the device-access commands These are currently not quite in alphabetical order. Before adding more, sort them. Signed-off-by: Simon Glass <sjg@chromium.org> Suggested-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-08-04 22:34:28 +00:00
config CMD_GPT_RENAME
bool "GPT partition renaming commands"
depends on CMD_GPT
help
Enables the 'gpt' command to interchange names on two GPT
partitions via the 'gpt swap' command or to rename single
partitions via the 'rename' command.
Move all command code into its own directory There are a lot of unrelated files in common, including all of the commands. Moving them into their own directory makes them easier to find and is more logical. Some commands include non-command code, such as cmd_scsi.c. This should be sorted out at some point so that the function can be enabled with or without the associated command. Unfortunately, with m68k I get this error: m68k: + M5329AFEE +arch/m68k/cpu/mcf532x/start.o: In function `_start': +arch/m68k/cpu/mcf532x/start.S:159:(.text+0x452): relocation truncated to fit: R_68K_PC16 against symbol `board_init_f' defined in .text.board_init_f section in common/built-in.o I hope someone can shed some light on what this means. I hope it isn't depending on the position of code in the image. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de> Acked-by: Stefan Roese <sr@denx.de> Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
2016-01-18 03:53:51 +00:00
Convert CONFIG_CMD_IDE to Kconfig This converts the following to Kconfig: CONFIG_CMD_IDE Signed-off-by: Simon Glass <sjg@chromium.org>
2017-05-17 09:25:29 +00:00
config CMD_IDE
bool "ide - Support for IDE drivers"
Kconfig: Add a CONFIG_IDE option At present IDE support is controlled by CONFIG_CMD_IDE. Add a separate CONFIG_IDE option so that IDE support can be enabled without requiring the 'ide' command. Update existing users and move the ide driver into drivers/block since it should not be in common/. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-05-17 09:25:30 +00:00
select IDE
Convert CONFIG_CMD_IDE to Kconfig This converts the following to Kconfig: CONFIG_CMD_IDE Signed-off-by: Simon Glass <sjg@chromium.org>
2017-05-17 09:25:29 +00:00
help
Provides an 'ide' command which allows accessing the IDE drive,
reseting the IDE interface, printing the partition table and
geting device info. It also enables the 'diskboot' command which
permits booting from an IDE drive.
Convert CONFIG_CMD_IO to Kconfig This converts the following to Kconfig: CONFIG_CMD_IO Signed-off-by: Simon Glass <sjg@chromium.org>
2017-05-17 09:25:34 +00:00
config CMD_IO
bool "io - Support for performing I/O accesses"
help
Provides an 'iod' command to display I/O space and an 'iow' command
to write values to the I/O space. This can be useful for manually
checking the state of devices during boot when debugging device
drivers, etc.
Convert CONFIG_CMD_IOTRACE to Kconfig This converts the following to Kconfig: CONFIG_CMD_IOTRACE Signed-off-by: Simon Glass <sjg@chromium.org>
2017-05-17 09:25:36 +00:00
config CMD_IOTRACE
bool "iotrace - Support for tracing I/O activity"
help
Provides an 'iotrace' command which supports recording I/O reads and
writes in a trace buffer in memory . It also maintains a checksum
of the trace records (even if space is exhausted) so that the
sequence of I/O accesses can be verified.
When debugging drivers it is useful to see what I/O accesses were
done and in what order.
Even if the individual accesses are of little interest it can be
useful to verify that the access pattern is consistent each time
an operation is performed. In this case a checksum can be used to
characterise the operation of a driver. The checksum can be compared
across different runs of the operation to verify that the driver is
working properly.
In particular, when performing major refactoring of the driver, where
the access pattern should not change, the checksum provides assurance
that the refactoring work has not broken the driver.
This works by sneaking into the io.h heder for an architecture and
redirecting I/O accesses through iotrace's tracing mechanism.
For now no commands are provided to examine the trace buffer. The
format is fairly simple, so 'md' is a reasonable substitute.
Note: The checksum feature is only useful for I/O regions where the
contents do not change outside of software control. Where this is not
suitable you can fall back to manually comparing the addresses. It
might be useful to enhance tracing to only checksum the accesses and
not the data read/written.
Kconfig: Sort the device-access commands These are currently not quite in alphabetical order. Before adding more, sort them. Signed-off-by: Simon Glass <sjg@chromium.org> Suggested-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-08-04 22:34:28 +00:00
config CMD_I2C
bool "i2c"
help
I2C support.
w1: add command for onewire protocol Add basic command for bus information and read for onewire bus using Dallas 1-Wire protocol. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2018-09-18 07:35:33 +00:00
config CMD_W1
depends on W1
default y if W1
bool "w1 - Support for Dallas 1-Wire protocol"
help
Dallas 1-wire protocol support
Move all command code into its own directory There are a lot of unrelated files in common, including all of the commands. Moving them into their own directory makes them easier to find and is more logical. Some commands include non-command code, such as cmd_scsi.c. This should be sorted out at some point so that the function can be enabled with or without the associated command. Unfortunately, with m68k I get this error: m68k: + M5329AFEE +arch/m68k/cpu/mcf532x/start.o: In function `_start': +arch/m68k/cpu/mcf532x/start.S:159:(.text+0x452): relocation truncated to fit: R_68K_PC16 against symbol `board_init_f' defined in .text.board_init_f section in common/built-in.o I hope someone can shed some light on what this means. I hope it isn't depending on the position of code in the image. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de> Acked-by: Stefan Roese <sr@denx.de> Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
2016-01-18 03:53:51 +00:00
config CMD_LOADB
bool "loadb"
default y
help
Load a binary file over serial line.
config CMD_LOADS
bool "loads"
default y
help
Load an S-Record file over serial line
cmd: blkls: Add blkls command Add a command to print a list of available block device drivers, and for each, the list of known block devices. Signed-off-by: Niel Fourie <lusus@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Stefan Roese <sr@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de>
2020-03-30 15:22:58 +00:00
config CMD_LSBLK
depends on BLK
bool "lsblk - list block drivers and devices"
help
Print list of available block device drivers, and for each, the list
of known block devices.
cmd: Add MBR partition layout control utility Add a 'mbr' command to let users create or verify MBR partition layout based on the provided text description. The partition layout is alternatively read from the 'mbr_parts' environment variable. This can be used in scripts to help system image flashing tools to ensure proper partition layout. The syntax of the text description of the partition list is similar to the one used by the 'gpt' command. Supported parameters are: name (currently ignored), start (partition start offset in bytes), size (in bytes or '-' to expand it to the whole free area), bootable (boolean flag) and id (MBR partition type). If one wants to create more than 4 partitions, an 'Extended' primary partition (with 0x05 ID) has to be explicitely provided as a one of the first 4 entries. Here is an example how to create a 6 partitions (3 on the 'extended volume'), some of the predefined sizes: > setenv mbr_parts 'name=boot,start=4M,size=128M,bootable,id=0x0e; name=rootfs,size=3072M,id=0x83; name=system-data,size=512M,id=0x83; name=[ext],size=-,id=0x05; name=user,size=-,id=0x83; name=modules,size=100M,id=0x83; name=ramdisk,size=8M,id=0x83' > mbr write mmc 0 Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
2020-12-23 12:55:15 +00:00
config CMD_MBR
bool "MBR (Master Boot Record) command"
select DOS_PARTITION
select HAVE_BLOCK_DEVICE
help
Enable the 'mbr' command to ready and write MBR (Master Boot Record)
style partition tables.
cmd: Add a 'misc' command to access miscellaneous devices Enable the command "misc" for accessing miscellaneous devices with a MISC uclass driver. The command provides listing all MISC devices as well as read and write functionalities via their drivers. Signed-off-by: Bin Meng <bin.meng@windriver.com>
2020-10-14 06:34:52 +00:00
config CMD_MISC
bool "misc"
depends on MISC
help
Enable the command "misc" for accessing miscellaneous devices with
a MISC uclass driver. The command provides listing all MISC devices
as well as read and write functionalities via their drivers.
cmd: Kconfig: Add a Kconfig options for a few CMD Add the following CMD options to Kconfig: CMD_BOOTZ CMD_ASKENV CMD_GREPENV CMD_USB_MASS_STORAGE CMD_FAT CMD_MII CMD_CACHE CMD_DFU CMD_EXT2 CMD_EXT4 CMD_EXT4_WRITE CMD_FS_GENERIC CMD_MMC Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> [trini: Don't make CMD_USB_MASS_STORAGE nor CMD_DFU depend on CMD_USB] Signed-off-by: Tom Rini <trini@konsulko.com>
2016-04-21 14:05:23 +00:00
config CMD_MMC
bool "mmc"
help
MMC memory mapped support.
mmc: adjust Kconfig for mmc sub-commands All sub-commands of the mmc command should be shown in the Kconfig menu next to the mmc command. This includes: * mmc bkops * mmc rpmb * mmc swrite The mmc rpmb sub-command is not usable without CONFIG_SUPPORT_EMMC_RPMB. Add the missing dependency. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2020-03-31 17:39:28 +00:00
if CMD_MMC
config CMD_BKOPS_ENABLE
bool "mmc bkops enable"
depends on CMD_MMC
default n
help
Enable command for setting manual background operations handshake
on a eMMC device. The feature is optionally available on eMMC devices
conforming to standard >= 4.41.
Convert CONFIG_SUPPORT_EMMC_RPMB to Kconfig Convert CONFIG_SUPPORT_EMMC_RPMB to Kconfig. Split the command handling from the underlying support and expose this through CMD_MMC_RPMB. Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
2018-05-08 04:43:31 +00:00
config CMD_MMC_RPMB
bool "Enable support for RPMB in the mmc command"
mmc: adjust Kconfig for mmc sub-commands All sub-commands of the mmc command should be shown in the Kconfig menu next to the mmc command. This includes: * mmc bkops * mmc rpmb * mmc swrite The mmc rpmb sub-command is not usable without CONFIG_SUPPORT_EMMC_RPMB. Add the missing dependency. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2020-03-31 17:39:28 +00:00
depends on SUPPORT_EMMC_RPMB
Convert CONFIG_SUPPORT_EMMC_RPMB to Kconfig Convert CONFIG_SUPPORT_EMMC_RPMB to Kconfig. Split the command handling from the underlying support and expose this through CMD_MMC_RPMB. Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
2018-05-08 04:43:31 +00:00
help
Enable the commands for reading, writing and programming the
key for the Replay Protection Memory Block partition in eMMC.
mmc: Separate "mmc swrite" from fastboot Introduce CONFIG_IMAGE_SPARSE and CONFIG_CMD_MMC_SWRITE so the "mmc swrite" command is separated from the fastboot code. Move image-sparse from common to lib so it's clear it's library code. Rename CONFIG_FASTBOOT_FLASH_FILLBUF_SIZE to CONFIG_IMAGE_SPARSE_FILLBUF_SIZE and migrate it to Kconfig. Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com> Acked-by: Jassi Brar <jaswinder.singh@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-05-29 15:30:52 +00:00
config CMD_MMC_SWRITE
bool "mmc swrite"
mmc: adjust Kconfig for mmc sub-commands All sub-commands of the mmc command should be shown in the Kconfig menu next to the mmc command. This includes: * mmc bkops * mmc rpmb * mmc swrite The mmc rpmb sub-command is not usable without CONFIG_SUPPORT_EMMC_RPMB. Add the missing dependency. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2020-03-31 17:39:28 +00:00
depends on MMC_WRITE
mmc: Separate "mmc swrite" from fastboot Introduce CONFIG_IMAGE_SPARSE and CONFIG_CMD_MMC_SWRITE so the "mmc swrite" command is separated from the fastboot code. Move image-sparse from common to lib so it's clear it's library code. Rename CONFIG_FASTBOOT_FLASH_FILLBUF_SIZE to CONFIG_IMAGE_SPARSE_FILLBUF_SIZE and migrate it to Kconfig. Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com> Acked-by: Jassi Brar <jaswinder.singh@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-05-29 15:30:52 +00:00
select IMAGE_SPARSE
help
Enable support for the "mmc swrite" command to write Android sparse
images to eMMC.
mmc: adjust Kconfig for mmc sub-commands All sub-commands of the mmc command should be shown in the Kconfig menu next to the mmc command. This includes: * mmc bkops * mmc rpmb * mmc swrite The mmc rpmb sub-command is not usable without CONFIG_SUPPORT_EMMC_RPMB. Add the missing dependency. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2020-03-31 17:39:28 +00:00
endif
cmd: add clone command This patch adds a feature for block device cloning similar to dd command, this should be useful for boot-strapping a device where usb gadget or networking is not available. For instance one can clone a factory image into a blank emmc from an external sd card. Signed-off-by: John Chau <john@harmon.hk>
2020-07-02 04:01:21 +00:00
config CMD_CLONE
bool "clone"
depends on BLK
help
Enable storage cloning over block devices, useful for
initial flashing by external block device without network
or usb support.
cmd: optee_rpmb command for read/write of rpmb from optee Enable "optee_rpmb" command to write/read named persistent values created on RPMB by opening session with OPTEE AVB TA. This provides easy test for establishing a session with OPTEE TA and storage of persistent data in MMC RPMB. It includes following subcommands: optee_rpmb read_pvalue:read persistent values on rpmb via OPTEE AVB TA optee_rpmb write_pvalue:write persistent values on rpmb via OPTEE AVB TA Signed-off-by: Ruchika Gupta <ruchika.gupta@nxp.com> [Rebased] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-10-23 08:09:33 +00:00
config CMD_OPTEE_RPMB
bool "Enable read/write support on RPMB via OPTEE"
depends on SUPPORT_EMMC_RPMB && OPTEE
help
Enable the commands for reading, writing persistent named values
in the Replay Protection Memory Block partition in eMMC by
using Persistent Objects in OPTEE
cmd: mtd: add 'mtd' command There should not be a 'nand' command, a 'sf' command and certainly not a new 'spi-nand' command. Write a 'mtd' command instead to manage all MTD devices/partitions at once. This should be the preferred way to access any MTD device. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Jagan Teki <jagan@openedev.com> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-09-29 10:58:28 +00:00
config CMD_MTD
bool "mtd"
cmd: make MTD commands depend on MTD Defconfigs have been fixed, now we can add proper dependencies in Kconfig. SPI FLASH is still not dependent on MTD (deeper rework needed). Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-10-25 17:39:30 +00:00
depends on MTD
cmd: mtd: add 'mtd' command There should not be a 'nand' command, a 'sf' command and certainly not a new 'spi-nand' command. Write a 'mtd' command instead to manage all MTD devices/partitions at once. This should be the preferred way to access any MTD device. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Jagan Teki <jagan@openedev.com> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-09-29 10:58:28 +00:00
select MTD_PARTITIONS
help
MTD commands support.
cmd: Add a mux command This command lets the user list, select, and deselect mux controllers introduced with the mux framework on the fly. It has 3 subcommands: list, select, and deselect. List: Lists all the mux present on the system. The muxes are listed for each chip. The chip is identified by its device name. Each chip can have a number of mux controllers. Each is listed in sequence and is assigned a sequential ID based on its position in the mux chip. It lists details like ID, whether the mux is currently selected or not, the current state, the idle state, and the number of states. A sample output would look something like: => mux list a-mux-controller: ID Selected Current State Idle State Num States 0 no unknown as-is 0x4 1 no 0x2 0x2 0x10 2 no 0x73 0x73 0x100 another-mux-controller: ID Selected Current State Idle State Num States 0 no 0x1 0x1 0x4 1 no 0x2 0x2 0x4 Select: Selects a given mux and puts it in the specified state. This subcommand takes 3 arguments: mux chip, mux ID, state to set the mux in. The arguments mux chip and mux ID are used to identify which mux needs to be selected, and then it is selected to the given state. The mux needs to be deselected before it can be selected again in another state. The state should be a hexadecimal number. For example: => mux list a-mux-controller: ID Selected Current State Idle State Num States 0 no 0x1 0x1 0x4 1 no 0x1 0x1 0x4 => mux select a-mux-controller 0 0x3 => mux list a-mux-controller: ID Selected Current State Idle State Num States 0 yes 0x3 0x1 0x4 1 no 0x1 0x1 0x4 Deselect: Deselects a given mux and puts it in its idle state. This subcommand takes 2 arguments: the mux chip and mux ID to identify which mux needs to be deselected. So in the above example, we can deselect mux 0 using: => mux deselect a-mux-controller 0 => mux list a-mux-controller: ID Selected Current State Idle State Num States 0 no 0x1 0x1 0x4 1 no 0x1 0x1 0x4 Signed-off-by: Pratyush Yadav <p.yadav@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-16 10:46:35 +00:00
config CMD_MUX
bool "mux"
depends on MULTIPLEXER
help
List, select, and deselect mux controllers on the fly.
Move all command code into its own directory There are a lot of unrelated files in common, including all of the commands. Moving them into their own directory makes them easier to find and is more logical. Some commands include non-command code, such as cmd_scsi.c. This should be sorted out at some point so that the function can be enabled with or without the associated command. Unfortunately, with m68k I get this error: m68k: + M5329AFEE +arch/m68k/cpu/mcf532x/start.o: In function `_start': +arch/m68k/cpu/mcf532x/start.S:159:(.text+0x452): relocation truncated to fit: R_68K_PC16 against symbol `board_init_f' defined in .text.board_init_f section in common/built-in.o I hope someone can shed some light on what this means. I hope it isn't depending on the position of code in the image. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de> Acked-by: Stefan Roese <sr@denx.de> Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
2016-01-18 03:53:51 +00:00
config CMD_NAND
bool "nand"
cmd: nand: Make the NAND options default to NAND_SUNXI If we depend on the ARCH_SUNXI configuration option, the boards that do not have NAND support enabled (with the associated options) will not compile anymore. Depend on the NAND driver configuration option to make sure that is not the case. Reported-by: Chen-Yu Tsai <wens@csie.org> Tested-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-03-03 14:13:30 +00:00
default y if NAND_SUNXI
cmd: make MTD commands depend on MTD Defconfigs have been fixed, now we can add proper dependencies in Kconfig. SPI FLASH is still not dependent on MTD (deeper rework needed). Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-10-25 17:39:30 +00:00
depends on MTD_RAW_NAND
Move all command code into its own directory There are a lot of unrelated files in common, including all of the commands. Moving them into their own directory makes them easier to find and is more logical. Some commands include non-command code, such as cmd_scsi.c. This should be sorted out at some point so that the function can be enabled with or without the associated command. Unfortunately, with m68k I get this error: m68k: + M5329AFEE +arch/m68k/cpu/mcf532x/start.o: In function `_start': +arch/m68k/cpu/mcf532x/start.S:159:(.text+0x452): relocation truncated to fit: R_68K_PC16 against symbol `board_init_f' defined in .text.board_init_f section in common/built-in.o I hope someone can shed some light on what this means. I hope it isn't depending on the position of code in the image. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de> Acked-by: Stefan Roese <sr@denx.de> Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
2016-01-18 03:53:51 +00:00
help
NAND support.
cmd: nand: Expose optional suboptions in Kconfig Sometime we need to enable advanced suboptions of the nand command set. Expose these suboptions in Kconfig. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2017-02-27 17:22:07 +00:00
if CMD_NAND
config CMD_NAND_TRIMFFS
bool "nand write.trimffs"
sunxi: Enable UBI and NAND support Enable the NAND and UBI support in the configuration header so that we can (finally) use it. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Jagan Teki <jagan@openedev.com>
2017-02-27 17:22:10 +00:00
default y if ARCH_SUNXI
cmd: nand: Expose optional suboptions in Kconfig Sometime we need to enable advanced suboptions of the nand command set. Expose these suboptions in Kconfig. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2017-02-27 17:22:07 +00:00
help
Allows one to skip empty pages when flashing something on a NAND.
config CMD_NAND_LOCK_UNLOCK
bool "nand lock/unlock"
help
NAND locking support.
config CMD_NAND_TORTURE
bool "nand torture"
help
NAND torture support.
endif # CMD_NAND
nvme: Add nvme commands Add nvme commands in U-Boot command line. 1. "nvme scan" - scan NVMe blk devices 2. "nvme list" - show all available NVMe blk devices 3. "nvme info" - show current or a specific NVMe blk device 4. "nvme device" - show or set current device 5. "nvme part" - print partition table 6. "nvme read" - read data from NVMe blk device 7. "nvme write" - write data to NVMe blk device Signed-off-by: Zhikang Zhang <zhikang.zhang@nxp.com> Signed-off-by: Wenbin Song <wenbin.song@nxp.com> Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-08-03 09:30:59 +00:00
config CMD_NVME
bool "nvme"
depends on NVME
default y if NVME
help
NVM Express device support
Convert CONFIG_CMD_ONENAND to Kconfig This converts the following to Kconfig: CONFIG_CMD_ONENAND Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-08-04 22:34:31 +00:00
config CMD_ONENAND
bool "onenand - access to onenand device"
cmd: make MTD commands depend on MTD Defconfigs have been fixed, now we can add proper dependencies in Kconfig. SPI FLASH is still not dependent on MTD (deeper rework needed). Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-10-25 17:39:30 +00:00
depends on MTD
Convert CONFIG_CMD_ONENAND to Kconfig This converts the following to Kconfig: CONFIG_CMD_ONENAND Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-08-04 22:34:31 +00:00
help
OneNAND is a brand of NAND ('Not AND' gate) flash which provides
various useful features. This command allows reading, writing,
and erasing blocks. It allso provides a way to show and change
bad blocks, and test the device.
cmd: Add osd commands Add command to query information from and write text to on-screen display (OSD) devices. Signed-off-by: Mario Six <mario.six@gdsys.cc> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-09-27 07:19:34 +00:00
config CMD_OSD
bool "osd"
help
Enable the 'osd' command which allows to query information from and
write text data to a on-screen display (OSD) device; a virtual device
associated with a display capable of displaying a text overlay on the
display it's associated with..
cmd, disk: convert CONFIG_PARTITION_UUIDS, CMD_PART and CMD_GPT We convert CONFIG_PARTITION_UUIDS to Kconfig first. But in order to cleanly update all of the config files we must also update CMD_PART and CMD_GPT to also be in Kconfig in order to avoid complex logic elsewhere to update all of the config files. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay73@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2017-01-27 10:00:42 +00:00
config CMD_PART
bool "part"
Move most CONFIG_HAVE_BLOCK_DEVICE to Kconfig config_fallbacks.h has some logic that sets HAVE_BLOCK_DEVICE based on a list of enabled options. Moving HAVE_BLOCK_DEVICE to Kconfig allows us to drastically shrink the logic in config_fallbacks.h Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Rename HAVE_BLOCK_DEVICE to CONFIG_BLOCK_DEVICE] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-02-06 18:43:56 +00:00
select HAVE_BLOCK_DEVICE
Kconfig: Sort bool, default, select and imply options Fix Kconfig bool, default, select and imply options to be alphabetically sorted. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-07-23 13:55:13 +00:00
select PARTITION_UUIDS
cmd, disk: convert CONFIG_PARTITION_UUIDS, CMD_PART and CMD_GPT We convert CONFIG_PARTITION_UUIDS to Kconfig first. But in order to cleanly update all of the config files we must also update CMD_PART and CMD_GPT to also be in Kconfig in order to avoid complex logic elsewhere to update all of the config files. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay73@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2017-01-27 10:00:42 +00:00
help
Read and display information about the partition table on
various media.
Convert CONFIG_CMD_PCI to Kconfig This converts the following to Kconfig: CONFIG_CMD_PCI Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-08-04 22:34:34 +00:00
config CMD_PCI
bool "pci - Access PCI devices"
help
Provide access to PCI (Peripheral Interconnect Bus), a type of bus
used on some devices to allow the CPU to communicate with its
peripherals. Sub-commands allow bus enumeration, displaying and
changing configuration space and a few other features.
cmd: pinmux: Add pinmux command pinmux command allows to : - list all pin-controllers available on platforms - select a pin-controller - display the muxing of all pins of the current pin-controller or all pin-controllers depending of given options Signed-off-by: Patrice Chotard <patrice.chotard@st.com> cmd: pinmux: Fix pinmux command if "pinmux status" command is used without having set dev using "pinmux dev", print pinmux usage Reviewed-by: Simon Glass <sjg@chromium.org>
2018-10-24 12:10:17 +00:00
config CMD_PINMUX
bool "pinmux - show pins muxing"
cmd: pinmux: depend on PINCTRL The pinmux command uses functions pinctrl_get_pin_*(), which are missing if PINCTRL config option is disabled. Signed-off-by: Marek Behún <marek.behun@nic.cz> Cc: Simon Glass <sjg@chromium.org> Cc: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-02-09 20:23:47 +00:00
depends on PINCTRL
cmd: pinmux: Add pinmux command pinmux command allows to : - list all pin-controllers available on platforms - select a pin-controller - display the muxing of all pins of the current pin-controller or all pin-controllers depending of given options Signed-off-by: Patrice Chotard <patrice.chotard@st.com> cmd: pinmux: Fix pinmux command if "pinmux status" command is used without having set dev using "pinmux dev", print pinmux usage Reviewed-by: Simon Glass <sjg@chromium.org>
2018-10-24 12:10:17 +00:00
default y if PINCTRL
help
Parse all available pin-controllers and show pins muxing. This
is useful for debug purpoer to check the pin muxing and to know if
a pin is configured as a GPIO or as an alternate function.
cmd: Relocate poweroff under Device access commands Previously poweroff was located under boot. It seems to make more sense to have it located under the Device access commands. Signed-off-by: Adam Ford <aford173@gmail.com>
2018-09-09 12:05:57 +00:00
config CMD_POWEROFF
bool "poweroff"
help
Poweroff/Shutdown the system
Kconfig: Convert CMD_READ to Kconfig Convert this option and enable it in sandbox. Also correct a bug which was introduced with the block-device driver model conversion. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-08-04 22:34:39 +00:00
config CMD_READ
bool "read - Read binary data from a partition"
help
Provides low-level access to the data in a partition.
Kconfig: Sort the device-access commands These are currently not quite in alphabetical order. Before adding more, sort them. Signed-off-by: Simon Glass <sjg@chromium.org> Suggested-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-08-04 22:34:28 +00:00
config CMD_REMOTEPROC
bool "remoteproc"
depends on REMOTEPROC
help
Support for Remote Processor control
config CMD_SATA
bool "sata - Access SATA subsystem"
select SATA
help
SATA (Serial Advanced Technology Attachment) is a serial bus
standard for connecting to hard drives and other storage devices.
This command provides information about attached devices and allows
reading, writing and other operations.
SATA replaces PATA (originally just ATA), which stands for Parallel AT
Attachment, where AT refers to an IBM AT (Advanced Technology)
computer released in 1984.
Convert CONFIG_CMD_SAVES to Kconfig This converts the following to Kconfig: CONFIG_CMD_SAVES Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-08-04 22:34:43 +00:00
config CMD_SAVES
bool "saves - Save a file over serial in S-Record format"
help
Provides a way to save a binary file using the Motorola S-Record
format over the serial line.
cmd: scsi: move CMD_SCSI to device access commands Configuration option CMD_SCSI should be placed in the same submenu as CMD_SATA and CMD_MMC. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2018-02-14 07:05:44 +00:00
config CMD_SCSI
bool "scsi - Access to SCSI devices"
default y if SCSI
help
This provides a 'scsi' command which provides access to SCSI (Small
Computer System Interface) devices. The command provides a way to
scan the bus, reset the bus, read and write data and get information
about devices.
Convert CONFIG_CMD_SDRAM to Kconfig This converts the following to Kconfig: CONFIG_CMD_SDRAM Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-08-04 22:34:45 +00:00
config CMD_SDRAM
bool "sdram - Print SDRAM configuration information"
help
Provides information about attached SDRAM. This assumed that the
SDRAM has an EEPROM with information that can be read using the
I2C bus. This is only available on some boards.
Move all command code into its own directory There are a lot of unrelated files in common, including all of the commands. Moving them into their own directory makes them easier to find and is more logical. Some commands include non-command code, such as cmd_scsi.c. This should be sorted out at some point so that the function can be enabled with or without the associated command. Unfortunately, with m68k I get this error: m68k: + M5329AFEE +arch/m68k/cpu/mcf532x/start.o: In function `_start': +arch/m68k/cpu/mcf532x/start.S:159:(.text+0x452): relocation truncated to fit: R_68K_PC16 against symbol `board_init_f' defined in .text.board_init_f section in common/built-in.o I hope someone can shed some light on what this means. I hope it isn't depending on the position of code in the image. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de> Acked-by: Stefan Roese <sr@denx.de> Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
2016-01-18 03:53:51 +00:00
config CMD_SF
bool "sf"
Kconfig: Add SPI / SPI_FLASH as dependencies In order to use CMD_SF / CMD_SPI / ENV_IS_IN_SPI_FLASH we need to have the SPI (or SPI_FLASH/DM_SPI_FLASH, for CMD_SF) enabled. Express this in the Kconfigs. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2019-05-29 21:01:28 +00:00
depends on DM_SPI_FLASH || SPI_FLASH
cmd: sf: Mark it default if DM_SPI_FLASH enabled If DM_SPI_FLASH enabled that means it is using sf command for flash interface to access. SPI_FLASH can be used via sf command and board/driver functions to call spi flash ops, so mark it default only for DM_SPI_FLASH. This would prevent explicit adding of CONFIG_CMD_SF when DM_SPI_FLASH being enabled. Cc: Tom Rini <trini@konsulko.com> Acked-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-10-16 12:29:42 +00:00
default y if DM_SPI_FLASH
Move all command code into its own directory There are a lot of unrelated files in common, including all of the commands. Moving them into their own directory makes them easier to find and is more logical. Some commands include non-command code, such as cmd_scsi.c. This should be sorted out at some point so that the function can be enabled with or without the associated command. Unfortunately, with m68k I get this error: m68k: + M5329AFEE +arch/m68k/cpu/mcf532x/start.o: In function `_start': +arch/m68k/cpu/mcf532x/start.S:159:(.text+0x452): relocation truncated to fit: R_68K_PC16 against symbol `board_init_f' defined in .text.board_init_f section in common/built-in.o I hope someone can shed some light on what this means. I hope it isn't depending on the position of code in the image. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de> Acked-by: Stefan Roese <sr@denx.de> Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
2016-01-18 03:53:51 +00:00
help
SPI Flash support
Convert CONFIG_CMD_SF_TEST to Kconfig This converts the following to Kconfig: CONFIG_CMD_SF_TEST Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-08-04 22:34:46 +00:00
config CMD_SF_TEST
bool "sf test - Allow testing of SPI flash"
Kconfig: Add SPI / SPI_FLASH as dependencies In order to use CMD_SF / CMD_SPI / ENV_IS_IN_SPI_FLASH we need to have the SPI (or SPI_FLASH/DM_SPI_FLASH, for CMD_SF) enabled. Express this in the Kconfigs. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2019-05-29 21:01:28 +00:00
depends on CMD_SF
Convert CONFIG_CMD_SF_TEST to Kconfig This converts the following to Kconfig: CONFIG_CMD_SF_TEST Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-08-04 22:34:46 +00:00
help
Provides a way to test that SPI flash is working correctly. The
test is destructive, in that an area of SPI flash must be provided
for the test to use. Performance information is also provided,
measuring the performance of reading, writing and erasing in
Mbps (Million Bits Per Second). This value should approximately
equal the SPI bus speed for a single-bit-wide SPI bus, assuming
everything is working properly.
Move all command code into its own directory There are a lot of unrelated files in common, including all of the commands. Moving them into their own directory makes them easier to find and is more logical. Some commands include non-command code, such as cmd_scsi.c. This should be sorted out at some point so that the function can be enabled with or without the associated command. Unfortunately, with m68k I get this error: m68k: + M5329AFEE +arch/m68k/cpu/mcf532x/start.o: In function `_start': +arch/m68k/cpu/mcf532x/start.S:159:(.text+0x452): relocation truncated to fit: R_68K_PC16 against symbol `board_init_f' defined in .text.board_init_f section in common/built-in.o I hope someone can shed some light on what this means. I hope it isn't depending on the position of code in the image. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de> Acked-by: Stefan Roese <sr@denx.de> Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
2016-01-18 03:53:51 +00:00
config CMD_SPI
Convert CONFIG_DEFAULT_SPI_* to Kconfig This converts the following to Kconfig: CONFIG_DEFAULT_SPI_BUS CONFIG_DEFAULT_SPI_MODE Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-02-27 14:20:37 +00:00
bool "sspi - Command to access spi device"
Kconfig: Add SPI / SPI_FLASH as dependencies In order to use CMD_SF / CMD_SPI / ENV_IS_IN_SPI_FLASH we need to have the SPI (or SPI_FLASH/DM_SPI_FLASH, for CMD_SF) enabled. Express this in the Kconfigs. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2019-05-29 21:01:28 +00:00
depends on SPI
Move all command code into its own directory There are a lot of unrelated files in common, including all of the commands. Moving them into their own directory makes them easier to find and is more logical. Some commands include non-command code, such as cmd_scsi.c. This should be sorted out at some point so that the function can be enabled with or without the associated command. Unfortunately, with m68k I get this error: m68k: + M5329AFEE +arch/m68k/cpu/mcf532x/start.o: In function `_start': +arch/m68k/cpu/mcf532x/start.S:159:(.text+0x452): relocation truncated to fit: R_68K_PC16 against symbol `board_init_f' defined in .text.board_init_f section in common/built-in.o I hope someone can shed some light on what this means. I hope it isn't depending on the position of code in the image. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de> Acked-by: Stefan Roese <sr@denx.de> Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
2016-01-18 03:53:51 +00:00
help
SPI utility command.
Convert CONFIG_DEFAULT_SPI_* to Kconfig This converts the following to Kconfig: CONFIG_DEFAULT_SPI_BUS CONFIG_DEFAULT_SPI_MODE Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-02-27 14:20:37 +00:00
config DEFAULT_SPI_BUS
int "default spi bus used by sspi command"
depends on CMD_SPI
default 0
config DEFAULT_SPI_MODE
hex "default spi mode used by sspi command (see include/spi.h)"
depends on CMD_SPI
default 0
Convert CONFIG_CMD_TSI148 to Kconfig This converts the following to Kconfig: CONFIG_CMD_TSI148 Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-08-04 22:35:00 +00:00
config CMD_TSI148
bool "tsi148 - Command to access tsi148 device"
help
This provides various sub-commands to initialise and configure the
Turndra tsi148 device. See the command help for full details.
cmd: Add Support for UFS commands Add Support for commands to initialize and configure UFS devices. TODO: Add Support for commands to resize and reconfigure LUNs Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2019-10-15 12:54:40 +00:00
config CMD_UFS
bool "Enable UFS - Universal Flash Subsystem commands"
depends on UFS
help
"This provides commands to initialise and configure universal flash
subsystem devices"
Convert CONFIG_CMD_UNIVERSE to Kconfig This converts the following to Kconfig: CONFIG_CMD_UNIVERSE Since no board uses this, perhaps we should drop this command? Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-08-04 22:35:01 +00:00
config CMD_UNIVERSE
bool "universe - Command to set up the Turndra Universe controller"
help
This allows setting up the VMEbus provided by this controller.
See the command help for full details.
Move all command code into its own directory There are a lot of unrelated files in common, including all of the commands. Moving them into their own directory makes them easier to find and is more logical. Some commands include non-command code, such as cmd_scsi.c. This should be sorted out at some point so that the function can be enabled with or without the associated command. Unfortunately, with m68k I get this error: m68k: + M5329AFEE +arch/m68k/cpu/mcf532x/start.o: In function `_start': +arch/m68k/cpu/mcf532x/start.S:159:(.text+0x452): relocation truncated to fit: R_68K_PC16 against symbol `board_init_f' defined in .text.board_init_f section in common/built-in.o I hope someone can shed some light on what this means. I hope it isn't depending on the position of code in the image. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de> Acked-by: Stefan Roese <sr@denx.de> Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
2016-01-18 03:53:51 +00:00
config CMD_USB
bool "usb"
Move most CONFIG_HAVE_BLOCK_DEVICE to Kconfig config_fallbacks.h has some logic that sets HAVE_BLOCK_DEVICE based on a list of enabled options. Moving HAVE_BLOCK_DEVICE to Kconfig allows us to drastically shrink the logic in config_fallbacks.h Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Rename HAVE_BLOCK_DEVICE to CONFIG_BLOCK_DEVICE] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-02-06 18:43:56 +00:00
select HAVE_BLOCK_DEVICE
Move all command code into its own directory There are a lot of unrelated files in common, including all of the commands. Moving them into their own directory makes them easier to find and is more logical. Some commands include non-command code, such as cmd_scsi.c. This should be sorted out at some point so that the function can be enabled with or without the associated command. Unfortunately, with m68k I get this error: m68k: + M5329AFEE +arch/m68k/cpu/mcf532x/start.o: In function `_start': +arch/m68k/cpu/mcf532x/start.S:159:(.text+0x452): relocation truncated to fit: R_68K_PC16 against symbol `board_init_f' defined in .text.board_init_f section in common/built-in.o I hope someone can shed some light on what this means. I hope it isn't depending on the position of code in the image. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de> Acked-by: Stefan Roese <sr@denx.de> Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
2016-01-18 03:53:51 +00:00
help
USB support.
cmd: add sdp command Add a new command to start USB Serial Download Protocol (SDP) state machine. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Reviewed-by: Łukasz Majewski <lukma@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
2017-08-16 18:00:53 +00:00
config CMD_USB_SDP
bool "sdp"
select USB_FUNCTION_SDP
help
Enables the command "sdp" which is used to have U-Boot emulating the
Serial Download Protocol (SDP) via USB.
Kconfig: Replace spaces with tabs and missing newline Trivial Kconfig cleanup. Use tabs instead of spaces and every Kconfig entry should be separated by newline. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
2018-07-23 13:55:12 +00:00
usb: rockchip: add rockusb command this patch add rockusb command. the usage is rockusb <USB_controller> <devtype> <dev[:part]> e.g. rockusb 0 mmc 0 Signed-off-by: Eddie Cai <eddie.cai.linux@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-12-15 00:17:11 +00:00
config CMD_ROCKUSB
bool "rockusb"
depends on USB_FUNCTION_ROCKUSB
help
Kconfig: Replace spaces with tabs and missing newline Trivial Kconfig cleanup. Use tabs instead of spaces and every Kconfig entry should be separated by newline. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
2018-07-23 13:55:12 +00:00
Rockusb protocol is widely used by Rockchip SoC based devices. It can
usb: rockchip: add rockusb command this patch add rockusb command. the usage is rockusb <USB_controller> <devtype> <dev[:part]> e.g. rockusb 0 mmc 0 Signed-off-by: Eddie Cai <eddie.cai.linux@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-12-15 00:17:11 +00:00
read/write info, image to/from devices. This enable rockusb command
support to communication with rockusb device. for more detail about
this command, please read doc/README.rockusb.
cmd: add sdp command Add a new command to start USB Serial Download Protocol (SDP) state machine. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Reviewed-by: Łukasz Majewski <lukma@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
2017-08-16 18:00:53 +00:00
cmd: Kconfig: Add a Kconfig options for a few CMD Add the following CMD options to Kconfig: CMD_BOOTZ CMD_ASKENV CMD_GREPENV CMD_USB_MASS_STORAGE CMD_FAT CMD_MII CMD_CACHE CMD_DFU CMD_EXT2 CMD_EXT4 CMD_EXT4_WRITE CMD_FS_GENERIC CMD_MMC Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> [trini: Don't make CMD_USB_MASS_STORAGE nor CMD_DFU depend on CMD_USB] Signed-off-by: Tom Rini <trini@konsulko.com>
2016-04-21 14:05:23 +00:00
config CMD_USB_MASS_STORAGE
bool "UMS usb mass storage"
usb: ums: Kconfig: Select USB_FUNCTION_MASS_STORAGE when enabling 'ums' command The CONFIG_USB_FUNCTION_MASS_STORAGE must be selected when one enables support for ums command. Signed-off-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2018-01-29 18:28:02 +00:00
select USB_FUNCTION_MASS_STORAGE
cmd: Kconfig: Add a Kconfig options for a few CMD Add the following CMD options to Kconfig: CMD_BOOTZ CMD_ASKENV CMD_GREPENV CMD_USB_MASS_STORAGE CMD_FAT CMD_MII CMD_CACHE CMD_DFU CMD_EXT2 CMD_EXT4 CMD_EXT4_WRITE CMD_FS_GENERIC CMD_MMC Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> [trini: Don't make CMD_USB_MASS_STORAGE nor CMD_DFU depend on CMD_USB] Signed-off-by: Tom Rini <trini@konsulko.com>
2016-04-21 14:05:23 +00:00
help
USB mass storage support
xen: pvblock: Add initial support for para-virtualized block driver Add initial infrastructure for Xen para-virtualized block device. This includes compile-time configuration and the skeleton for the future driver implementation. Add new class UCLASS_PVBLOCK which is going to be a parent for virtual block devices. Add new interface type IF_TYPE_PVBLOCK. Implement basic driver setup by reading XenStore configuration. Signed-off-by: Andrii Anisov <andrii_anisov@epam.com> Signed-off-by: Anastasiia Lukianenko <anastasiia_lukianenko@epam.com> Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
2020-08-06 09:42:55 +00:00
config CMD_PVBLOCK
bool "Xen para-virtualized block device"
depends on XEN
select PVBLOCK
help
Xen para-virtualized block device support
virtio: cmd: Add virtio command for virtio devices Add 'virtio' command in U-Boot command line. Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi> Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-10-15 09:21:12 +00:00
config CMD_VIRTIO
bool "virtio"
depends on VIRTIO
default y if VIRTIO
help
VirtIO block device support
cmd: add wdt command Add a command to control the watchdog devices. This is useful if the watchdog is rather long running (eg. seconds) and it should be controlled by scripts. It is also handy during debugging. Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Stefan Roese <sr@denx.de>
2019-04-06 00:24:02 +00:00
config CMD_WDT
bool "wdt"
depends on WDT
help
This provides commands to control the watchdog timer devices.
cmd: Add axi command Add a command to debug the AXI bus. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-08-09 12:51:21 +00:00
config CMD_AXI
bool "axi"
depends on AXI
help
Enable the command "axi" for accessing AXI (Advanced eXtensible
Interface) busses, a on-chip interconnect specification for managing
functional blocks in SoC designs, which is also often used in designs
involving FPGAs (e.g. communication with IP cores in Xilinx FPGAs).
Move all command code into its own directory There are a lot of unrelated files in common, including all of the commands. Moving them into their own directory makes them easier to find and is more logical. Some commands include non-command code, such as cmd_scsi.c. This should be sorted out at some point so that the function can be enabled with or without the associated command. Unfortunately, with m68k I get this error: m68k: + M5329AFEE +arch/m68k/cpu/mcf532x/start.o: In function `_start': +arch/m68k/cpu/mcf532x/start.S:159:(.text+0x452): relocation truncated to fit: R_68K_PC16 against symbol `board_init_f' defined in .text.board_init_f section in common/built-in.o I hope someone can shed some light on what this means. I hope it isn't depending on the position of code in the image. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de> Acked-by: Stefan Roese <sr@denx.de> Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
2016-01-18 03:53:51 +00:00
endmenu
menu "Shell scripting commands"
config CMD_ECHO
bool "echo"
default y
help
Echo args to console
config CMD_ITEST
bool "itest"
default y
help
Return true/false on integer compare.
config CMD_SOURCE
bool "source"
default y
help
Run script from memory
config CMD_SETEXPR
bool "setexpr"
default y
help
Evaluate boolean and math expressions and store the result in an env
variable.
Also supports loading the value at a memory location into a variable.
If CONFIG_REGEX is enabled, setexpr also supports a gsub function.
endmenu
cmd: Add 'ab_select' command For A/B system update support the Android boot process requires to send 'androidboot.slot_suffix' parameter as a command line argument. This patch implementes 'ab_select' command which allows us to obtain current slot by processing the A/B metadata. The patch was extracted from commit [1] with one modification: the separator for specifying the name of metadata partition was changed from ';' to '#', because ';' is used for commands separation. [1] https://android-review.googlesource.com/c/platform/external/u-boot/+/729880/2 Signed-off-by: Ruslan Trofymenko <ruslan.trofymenko@linaro.org> Signed-off-by: Igor Opaniuk <igor.opaniuk@gmail.com> Reviewed-by: Alistair Strachan <astrachan@google.com> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-07-05 12:37:33 +00:00
menu "Android support commands"
config CMD_AB_SELECT
bool "ab_select"
default n
depends on ANDROID_AB
help
On Android devices with more than one boot slot (multiple copies of
the kernel and system images) this provides a command to select which
slot should be used to boot from and register the boot attempt. This
is used by the new A/B update model where one slot is updated in the
background while running from the other slot.
endmenu
Kconfig: cmd: Make networking command dependent on NET Enable networking command only when NET is enabled. And remove selecting NET for CMD_NET Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2018-02-26 15:01:02 +00:00
if NET
net: Make CMD_NET a menuconfig Previously, CMD_NET was an alias for 2 commands (bootp and tftpboot) and they we not able to be disabled. Separate out those 2 commands and move CMD_NET up to the menu level, which more accurately represents the code. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Duncan Hare <dh@synoia.com>
2018-04-13 20:26:30 +00:00
menuconfig CMD_NET
bool "Network commands"
default y
Convert CONFIG_MII et al to Kconfig This converts the following to Kconfig: CONFIG_MII CONFIG_DRIVER_TI_EMAC Signed-off-by: Adam Ford <aford173@gmail.com> Acked-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-07-21 04:03:57 +00:00
imply NETDEVICES
net: Make CMD_NET a menuconfig Previously, CMD_NET was an alias for 2 commands (bootp and tftpboot) and they we not able to be disabled. Separate out those 2 commands and move CMD_NET up to the menu level, which more accurately represents the code. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Duncan Hare <dh@synoia.com>
2018-04-13 20:26:30 +00:00
if CMD_NET
config CMD_BOOTP
bool "bootp"
Move all command code into its own directory There are a lot of unrelated files in common, including all of the commands. Moving them into their own directory makes them easier to find and is more logical. Some commands include non-command code, such as cmd_scsi.c. This should be sorted out at some point so that the function can be enabled with or without the associated command. Unfortunately, with m68k I get this error: m68k: + M5329AFEE +arch/m68k/cpu/mcf532x/start.o: In function `_start': +arch/m68k/cpu/mcf532x/start.S:159:(.text+0x452): relocation truncated to fit: R_68K_PC16 against symbol `board_init_f' defined in .text.board_init_f section in common/built-in.o I hope someone can shed some light on what this means. I hope it isn't depending on the position of code in the image. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de> Acked-by: Stefan Roese <sr@denx.de> Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
2016-01-18 03:53:51 +00:00
default y
help
bootp - boot image via network using BOOTP/TFTP protocol
net: Make CMD_NET a menuconfig Previously, CMD_NET was an alias for 2 commands (bootp and tftpboot) and they we not able to be disabled. Separate out those 2 commands and move CMD_NET up to the menu level, which more accurately represents the code. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Duncan Hare <dh@synoia.com>
2018-04-13 20:26:30 +00:00
net: Move the DHCP command below the BOOTP command Move DHCP to directly follow BOOTP so that Kconfig can show the dependency as a hierarchy. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Duncan Hare <dh@synoia.com>
2018-04-13 20:26:33 +00:00
config CMD_DHCP
bool "dhcp"
depends on CMD_BOOTP
help
Boot image via network using DHCP/TFTP protocol
net: Move net command options to the cmd menu Options that controlled the tftp and bootp commands depended on their commands, but lived in the net menu. Move them so they are in a consistent location. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Chris Packham <judge.packham@gmail.com>
2018-04-13 20:26:32 +00:00
config BOOTP_BOOTPATH
net: Improve menu options and help for BOOTP options The options were pretty unhelpful, so improve them some. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Chris Packham <judge.packham@gmail.com>
2018-04-13 20:26:34 +00:00
bool "Request & store 'rootpath' from BOOTP/DHCP server"
net: Make the BOOTP options default The BOOTP options used to be and should still be default for all boards with CMD_NET enabled. One should not be forced to use DISTRO_DEFAULTS to get them. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Duncan Hare <dh@synoia.com>
2018-04-13 20:26:37 +00:00
default y
net: Move net command options to the cmd menu Options that controlled the tftp and bootp commands depended on their commands, but lived in the net menu. Move them so they are in a consistent location. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Chris Packham <judge.packham@gmail.com>
2018-04-13 20:26:32 +00:00
depends on CMD_BOOTP
net: Improve menu options and help for BOOTP options The options were pretty unhelpful, so improve them some. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Chris Packham <judge.packham@gmail.com>
2018-04-13 20:26:34 +00:00
help
Even though the config is called BOOTP_BOOTPATH, it stores the
path in the variable 'rootpath'.
net: Move net command options to the cmd menu Options that controlled the tftp and bootp commands depended on their commands, but lived in the net menu. Move them so they are in a consistent location. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Chris Packham <judge.packham@gmail.com>
2018-04-13 20:26:32 +00:00
config BOOTP_DNS
net: Improve menu options and help for BOOTP options The options were pretty unhelpful, so improve them some. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Chris Packham <judge.packham@gmail.com>
2018-04-13 20:26:34 +00:00
bool "Request & store 'dnsip' from BOOTP/DHCP server"
net: Make the BOOTP options default The BOOTP options used to be and should still be default for all boards with CMD_NET enabled. One should not be forced to use DISTRO_DEFAULTS to get them. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Duncan Hare <dh@synoia.com>
2018-04-13 20:26:37 +00:00
default y
net: Move net command options to the cmd menu Options that controlled the tftp and bootp commands depended on their commands, but lived in the net menu. Move them so they are in a consistent location. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Chris Packham <judge.packham@gmail.com>
2018-04-13 20:26:32 +00:00
depends on CMD_BOOTP
net: Improve menu options and help for BOOTP options The options were pretty unhelpful, so improve them some. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Chris Packham <judge.packham@gmail.com>
2018-04-13 20:26:34 +00:00
help
The primary DNS server is stored as 'dnsip'. If two servers are
returned, you must set BOOTP_DNS2 to store that second server IP
also.
net: Move net command options to the cmd menu Options that controlled the tftp and bootp commands depended on their commands, but lived in the net menu. Move them so they are in a consistent location. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Chris Packham <judge.packham@gmail.com>
2018-04-13 20:26:32 +00:00
net: Add the BOOTP_DNS2 option to Kconfig Commit 3b3ea2c56ec4bc5 ("Kconfig: cmd: Make networking command dependent on NET") removed the help documentation from the README but didn't add it back to Kconfig. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Duncan Hare <dh@synoia.com>
2018-04-13 20:26:35 +00:00
config BOOTP_DNS2
bool "Store 'dnsip2' from BOOTP/DHCP server"
depends on BOOTP_DNS
help
If a DHCP client requests the DNS server IP from a DHCP server,
it is possible that more than one DNS serverip is offered to the
client. If CONFIG_BOOTP_DNS2 is enabled, the secondary DNS
server IP will be stored in the additional environment
variable "dnsip2". The first DNS serverip is always
stored in the variable "dnsip", when BOOTP_DNS is defined.
net: Move net command options to the cmd menu Options that controlled the tftp and bootp commands depended on their commands, but lived in the net menu. Move them so they are in a consistent location. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Chris Packham <judge.packham@gmail.com>
2018-04-13 20:26:32 +00:00
config BOOTP_GATEWAY
net: Improve menu options and help for BOOTP options The options were pretty unhelpful, so improve them some. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Chris Packham <judge.packham@gmail.com>
2018-04-13 20:26:34 +00:00
bool "Request & store 'gatewayip' from BOOTP/DHCP server"
net: Make the BOOTP options default The BOOTP options used to be and should still be default for all boards with CMD_NET enabled. One should not be forced to use DISTRO_DEFAULTS to get them. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Duncan Hare <dh@synoia.com>
2018-04-13 20:26:37 +00:00
default y
net: Move net command options to the cmd menu Options that controlled the tftp and bootp commands depended on their commands, but lived in the net menu. Move them so they are in a consistent location. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Chris Packham <judge.packham@gmail.com>
2018-04-13 20:26:32 +00:00
depends on CMD_BOOTP
config BOOTP_HOSTNAME
net: Improve menu options and help for BOOTP options The options were pretty unhelpful, so improve them some. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Chris Packham <judge.packham@gmail.com>
2018-04-13 20:26:34 +00:00
bool "Request & store 'hostname' from BOOTP/DHCP server"
net: Make the BOOTP options default The BOOTP options used to be and should still be default for all boards with CMD_NET enabled. One should not be forced to use DISTRO_DEFAULTS to get them. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Duncan Hare <dh@synoia.com>
2018-04-13 20:26:37 +00:00
default y
net: Move net command options to the cmd menu Options that controlled the tftp and bootp commands depended on their commands, but lived in the net menu. Move them so they are in a consistent location. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Chris Packham <judge.packham@gmail.com>
2018-04-13 20:26:32 +00:00
depends on CMD_BOOTP
net: Improve menu options and help for BOOTP options The options were pretty unhelpful, so improve them some. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Chris Packham <judge.packham@gmail.com>
2018-04-13 20:26:34 +00:00
help
The name may or may not be qualified with the local domain name.
net: Move net command options to the cmd menu Options that controlled the tftp and bootp commands depended on their commands, but lived in the net menu. Move them so they are in a consistent location. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Chris Packham <judge.packham@gmail.com>
2018-04-13 20:26:32 +00:00
net: Add option to prefer bootp/dhcp serverip Currently we can choose between 2 different types of behavior for the serverip variable: 1) Always overwrite it with the DHCP server IP address (default) 2) Ignore what the DHCP server says (CONFIG_BOOTP_SERVERIP) This patch adds a 3rd option: 3) Use serverip from DHCP if no serverip is given (CONFIG_BOOTP_PREFER_SERVERIP) With this new option, we can have the default case that a boot file gets loaded from the DHCP provided TFTP server work while allowing users to specify their own serverip variable to explicitly use a different tftp server. Signed-off-by: Alexander Graf <agraf@suse.de> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-06-15 08:29:28 +00:00
config BOOTP_PREFER_SERVERIP
bool "serverip variable takes precedent over DHCP server IP."
depends on CMD_BOOTP
help
By default a BOOTP/DHCP reply will overwrite the 'serverip' variable.
With this option enabled, the 'serverip' variable in the environment
takes precedence over DHCP server IP and will only be set by the DHCP
server if not already set in the environment.
net: Move net command options to the cmd menu Options that controlled the tftp and bootp commands depended on their commands, but lived in the net menu. Move them so they are in a consistent location. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Chris Packham <judge.packham@gmail.com>
2018-04-13 20:26:32 +00:00
config BOOTP_SUBNETMASK
net: Improve menu options and help for BOOTP options The options were pretty unhelpful, so improve them some. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Chris Packham <judge.packham@gmail.com>
2018-04-13 20:26:34 +00:00
bool "Request & store 'netmask' from BOOTP/DHCP server"
net: Make the BOOTP options default The BOOTP options used to be and should still be default for all boards with CMD_NET enabled. One should not be forced to use DISTRO_DEFAULTS to get them. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Duncan Hare <dh@synoia.com>
2018-04-13 20:26:37 +00:00
default y
net: Move net command options to the cmd menu Options that controlled the tftp and bootp commands depended on their commands, but lived in the net menu. Move them so they are in a consistent location. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Chris Packham <judge.packham@gmail.com>
2018-04-13 20:26:32 +00:00
depends on CMD_BOOTP
net: Add Kconfig option for BOOTP_NTPSERVER Add a Kconfig option for BOOTP_NTPSERVER to enable the DHCP/BOOTP option to configure the sntp server address. Signed-off-by: Chris Packham <judge.packham@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-05-03 08:19:02 +00:00
config BOOTP_NTPSERVER
bool "Request & store 'ntpserverip' from BOOTP/DHCP server"
depends on CMD_BOOTP
net: introduce packet capture support Add support for capturing ethernet packets and storing them in memory in PCAP(2.4) format, later to be analyzed by any PCAP viewer software (IE. Wireshark) This feature greatly assist debugging network issues such as detecting dropped packets, packet corruption etc. Signed-off-by: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Alex Marginean <alexm.osslist@gmail.com> Tested-by: Alex Marginean <alexm.osslist@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-07-18 18:43:30 +00:00
config CMD_PCAP
bool "pcap capture"
help
Selecting this will allow capturing all Ethernet packets and store
them in physical memory in a PCAP formated file,
later to be analyzed by PCAP reader application (IE. WireShark).
net: Move net command options to the cmd menu Options that controlled the tftp and bootp commands depended on their commands, but lived in the net menu. Move them so they are in a consistent location. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Chris Packham <judge.packham@gmail.com>
2018-04-13 20:26:32 +00:00
config BOOTP_PXE
net: Improve BOOTP PXE config option Improve the documentation and correct the listed dependencies. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Duncan Hare <dh@synoia.com>
2018-04-13 20:26:36 +00:00
bool "Send PXE client arch to BOOTP/DHCP server"
net: Make the BOOTP options default The BOOTP options used to be and should still be default for all boards with CMD_NET enabled. One should not be forced to use DISTRO_DEFAULTS to get them. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Duncan Hare <dh@synoia.com>
2018-04-13 20:26:37 +00:00
default y
net: Improve BOOTP PXE config option Improve the documentation and correct the listed dependencies. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Duncan Hare <dh@synoia.com>
2018-04-13 20:26:36 +00:00
depends on CMD_BOOTP && CMD_PXE
help
Supported for ARM, ARM64, and x86 for now.
net: Move net command options to the cmd menu Options that controlled the tftp and bootp commands depended on their commands, but lived in the net menu. Move them so they are in a consistent location. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Chris Packham <judge.packham@gmail.com>
2018-04-13 20:26:32 +00:00
config BOOTP_PXE_CLIENTARCH
hex
net: Improve BOOTP PXE config option Improve the documentation and correct the listed dependencies. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Duncan Hare <dh@synoia.com>
2018-04-13 20:26:36 +00:00
depends on BOOTP_PXE
net: Move net command options to the cmd menu Options that controlled the tftp and bootp commands depended on their commands, but lived in the net menu. Move them so they are in a consistent location. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Chris Packham <judge.packham@gmail.com>
2018-04-13 20:26:32 +00:00
default 0x16 if ARM64
default 0x15 if ARM
default 0 if X86
config BOOTP_VCI_STRING
string
depends on CMD_BOOTP
arm: v7R: Add initial support The Cortex-R* processors are a mid-range CPUs for use in deeply-embedded, real-time systems. It implements the ARMv7-R architecture, and includes Thumb-2 technology for optimum code density and processing throughput. Except for MPU(Memory Protection Unit) and few CP15 registers, most of the features are compatible with v7 architecture. So,reuse the same armv7 folder and introduce a new config CPU_V7R in order to differentiate from v7 based platforms. Tested-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2018-04-26 12:51:29 +00:00
default "U-Boot.armv7" if CPU_V7A || CPU_V7M || CPU_V7R
net: Move net command options to the cmd menu Options that controlled the tftp and bootp commands depended on their commands, but lived in the net menu. Move them so they are in a consistent location. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Chris Packham <judge.packham@gmail.com>
2018-04-13 20:26:32 +00:00
default "U-Boot.armv8" if ARM64
default "U-Boot.arm" if ARM
default "U-Boot"
net: Make CMD_NET a menuconfig Previously, CMD_NET was an alias for 2 commands (bootp and tftpboot) and they we not able to be disabled. Separate out those 2 commands and move CMD_NET up to the menu level, which more accurately represents the code. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Duncan Hare <dh@synoia.com>
2018-04-13 20:26:30 +00:00
config CMD_TFTPBOOT
bool "tftpboot"
default y
help
Move all command code into its own directory There are a lot of unrelated files in common, including all of the commands. Moving them into their own directory makes them easier to find and is more logical. Some commands include non-command code, such as cmd_scsi.c. This should be sorted out at some point so that the function can be enabled with or without the associated command. Unfortunately, with m68k I get this error: m68k: + M5329AFEE +arch/m68k/cpu/mcf532x/start.o: In function `_start': +arch/m68k/cpu/mcf532x/start.S:159:(.text+0x452): relocation truncated to fit: R_68K_PC16 against symbol `board_init_f' defined in .text.board_init_f section in common/built-in.o I hope someone can shed some light on what this means. I hope it isn't depending on the position of code in the image. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de> Acked-by: Stefan Roese <sr@denx.de> Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
2016-01-18 03:53:51 +00:00
tftpboot - boot image via network using TFTP protocol
config CMD_TFTPPUT
bool "tftp put"
net: Make CMD_NET a menuconfig Previously, CMD_NET was an alias for 2 commands (bootp and tftpboot) and they we not able to be disabled. Separate out those 2 commands and move CMD_NET up to the menu level, which more accurately represents the code. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Duncan Hare <dh@synoia.com>
2018-04-13 20:26:30 +00:00
depends on CMD_TFTPBOOT
Move all command code into its own directory There are a lot of unrelated files in common, including all of the commands. Moving them into their own directory makes them easier to find and is more logical. Some commands include non-command code, such as cmd_scsi.c. This should be sorted out at some point so that the function can be enabled with or without the associated command. Unfortunately, with m68k I get this error: m68k: + M5329AFEE +arch/m68k/cpu/mcf532x/start.o: In function `_start': +arch/m68k/cpu/mcf532x/start.S:159:(.text+0x452): relocation truncated to fit: R_68K_PC16 against symbol `board_init_f' defined in .text.board_init_f section in common/built-in.o I hope someone can shed some light on what this means. I hope it isn't depending on the position of code in the image. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de> Acked-by: Stefan Roese <sr@denx.de> Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
2016-01-18 03:53:51 +00:00
help
TFTP put command, for uploading files to a server
config CMD_TFTPSRV
bool "tftpsrv"
net: Make CMD_NET a menuconfig Previously, CMD_NET was an alias for 2 commands (bootp and tftpboot) and they we not able to be disabled. Separate out those 2 commands and move CMD_NET up to the menu level, which more accurately represents the code. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Duncan Hare <dh@synoia.com>
2018-04-13 20:26:30 +00:00
depends on CMD_TFTPBOOT
Move all command code into its own directory There are a lot of unrelated files in common, including all of the commands. Moving them into their own directory makes them easier to find and is more logical. Some commands include non-command code, such as cmd_scsi.c. This should be sorted out at some point so that the function can be enabled with or without the associated command. Unfortunately, with m68k I get this error: m68k: + M5329AFEE +arch/m68k/cpu/mcf532x/start.o: In function `_start': +arch/m68k/cpu/mcf532x/start.S:159:(.text+0x452): relocation truncated to fit: R_68K_PC16 against symbol `board_init_f' defined in .text.board_init_f section in common/built-in.o I hope someone can shed some light on what this means. I hope it isn't depending on the position of code in the image. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de> Acked-by: Stefan Roese <sr@denx.de> Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
2016-01-18 03:53:51 +00:00
help
Act as a TFTP server and boot the first received file
net: Move net command options to the cmd menu Options that controlled the tftp and bootp commands depended on their commands, but lived in the net menu. Move them so they are in a consistent location. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Chris Packham <judge.packham@gmail.com>
2018-04-13 20:26:32 +00:00
config NET_TFTP_VARS
bool "Control TFTP timeout and count through environment"
depends on CMD_TFTPBOOT
default y
help
If set, allows controlling the TFTP timeout through the
environment variable tftptimeout, and the TFTP maximum
timeout count through the variable tftptimeoutcountmax.
If unset, timeout and maximum are hard-defined as 1 second
and 10 timouts per TFTP transfer.
Move all command code into its own directory There are a lot of unrelated files in common, including all of the commands. Moving them into their own directory makes them easier to find and is more logical. Some commands include non-command code, such as cmd_scsi.c. This should be sorted out at some point so that the function can be enabled with or without the associated command. Unfortunately, with m68k I get this error: m68k: + M5329AFEE +arch/m68k/cpu/mcf532x/start.o: In function `_start': +arch/m68k/cpu/mcf532x/start.S:159:(.text+0x452): relocation truncated to fit: R_68K_PC16 against symbol `board_init_f' defined in .text.board_init_f section in common/built-in.o I hope someone can shed some light on what this means. I hope it isn't depending on the position of code in the image. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de> Acked-by: Stefan Roese <sr@denx.de> Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
2016-01-18 03:53:51 +00:00
config CMD_RARP
bool "rarpboot"
help
Boot image via network using RARP/TFTP protocol
config CMD_NFS
bool "nfs"
default y
help
Boot image via network using NFS protocol.
cmd: Kconfig: Add a Kconfig options for a few CMD Add the following CMD options to Kconfig: CMD_BOOTZ CMD_ASKENV CMD_GREPENV CMD_USB_MASS_STORAGE CMD_FAT CMD_MII CMD_CACHE CMD_DFU CMD_EXT2 CMD_EXT4 CMD_EXT4_WRITE CMD_FS_GENERIC CMD_MMC Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> [trini: Don't make CMD_USB_MASS_STORAGE nor CMD_DFU depend on CMD_USB] Signed-off-by: Tom Rini <trini@konsulko.com>
2016-04-21 14:05:23 +00:00
config CMD_MII
bool "mii"
cmd: mdio/mii: add Kconfig help and allow break dependency * Add Kconfig help describing the purpose of each command. * Add CONFIG_CMD_MDIO so it could be selected individually, as it doesn't depend on the mii command. * Add Kconfig imply to mii to automatically select the mdio command. Signed-off-by: Ramon Fried <rfried.dev@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-09-13 15:25:03 +00:00
imply CMD_MDIO
help
If set, allows 802.3(clause 22) MII Management functions interface access
The management interface specified in Clause 22 provides
a simple, two signal, serial interface to connect a
Station Management entity and a managed PHY for providing access
to management parameters and services.
The interface is referred to as the MII management interface.
config CMD_MDIO
bool "mdio"
depends on PHYLIB
help
If set, allows Enable 802.3(clause 45) MDIO interface registers access
The MDIO interface is orthogonal to the MII interface and extends
it by adding access to more registers through indirect addressing.
cmd: Kconfig: Add a Kconfig options for a few CMD Add the following CMD options to Kconfig: CMD_BOOTZ CMD_ASKENV CMD_GREPENV CMD_USB_MASS_STORAGE CMD_FAT CMD_MII CMD_CACHE CMD_DFU CMD_EXT2 CMD_EXT4 CMD_EXT4_WRITE CMD_FS_GENERIC CMD_MMC Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> [trini: Don't make CMD_USB_MASS_STORAGE nor CMD_DFU depend on CMD_USB] Signed-off-by: Tom Rini <trini@konsulko.com>
2016-04-21 14:05:23 +00:00
Move all command code into its own directory There are a lot of unrelated files in common, including all of the commands. Moving them into their own directory makes them easier to find and is more logical. Some commands include non-command code, such as cmd_scsi.c. This should be sorted out at some point so that the function can be enabled with or without the associated command. Unfortunately, with m68k I get this error: m68k: + M5329AFEE +arch/m68k/cpu/mcf532x/start.o: In function `_start': +arch/m68k/cpu/mcf532x/start.S:159:(.text+0x452): relocation truncated to fit: R_68K_PC16 against symbol `board_init_f' defined in .text.board_init_f section in common/built-in.o I hope someone can shed some light on what this means. I hope it isn't depending on the position of code in the image. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de> Acked-by: Stefan Roese <sr@denx.de> Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
2016-01-18 03:53:51 +00:00
config CMD_PING
bool "ping"
help
Send ICMP ECHO_REQUEST to network host
config CMD_CDP
bool "cdp"
help
Perform CDP network configuration
config CMD_SNTP
bool "sntp"
sntp: use udp framework This commits update the support of sntp to use the framework udp. This change allows to remove all the reference to sntp in the main network file net/net.c. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-09-18 12:13:02 +00:00
select PROT_UDP
Move all command code into its own directory There are a lot of unrelated files in common, including all of the commands. Moving them into their own directory makes them easier to find and is more logical. Some commands include non-command code, such as cmd_scsi.c. This should be sorted out at some point so that the function can be enabled with or without the associated command. Unfortunately, with m68k I get this error: m68k: + M5329AFEE +arch/m68k/cpu/mcf532x/start.o: In function `_start': +arch/m68k/cpu/mcf532x/start.S:159:(.text+0x452): relocation truncated to fit: R_68K_PC16 against symbol `board_init_f' defined in .text.board_init_f section in common/built-in.o I hope someone can shed some light on what this means. I hope it isn't depending on the position of code in the image. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de> Acked-by: Stefan Roese <sr@denx.de> Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
2016-01-18 03:53:51 +00:00
help
Synchronize RTC via network
config CMD_DNS
bool "dns"
help
Lookup the IP of a hostname
config CMD_LINK_LOCAL
bool "linklocal"
net: Express LINK_LOCAL dependency on LIB_RAND Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2018-04-30 17:45:22 +00:00
select LIB_RAND
Move all command code into its own directory There are a lot of unrelated files in common, including all of the commands. Moving them into their own directory makes them easier to find and is more logical. Some commands include non-command code, such as cmd_scsi.c. This should be sorted out at some point so that the function can be enabled with or without the associated command. Unfortunately, with m68k I get this error: m68k: + M5329AFEE +arch/m68k/cpu/mcf532x/start.o: In function `_start': +arch/m68k/cpu/mcf532x/start.S:159:(.text+0x452): relocation truncated to fit: R_68K_PC16 against symbol `board_init_f' defined in .text.board_init_f section in common/built-in.o I hope someone can shed some light on what this means. I hope it isn't depending on the position of code in the image. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de> Acked-by: Stefan Roese <sr@denx.de> Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
2016-01-18 03:53:51 +00:00
help
Acquire a network IP address using the link-local protocol
net: Move net command options to the cmd menu Options that controlled the tftp and bootp commands depended on their commands, but lived in the net menu. Move them so they are in a consistent location. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Chris Packham <judge.packham@gmail.com>
2018-04-13 20:26:32 +00:00
endif
Convert CONFIG_CMD_ETHSW to Kconfig This converts the following to Kconfig: CONFIG_CMD_ETHSW Also enable it for sandbox to increase build coverage. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-05-17 09:25:17 +00:00
config CMD_ETHSW
bool "ethsw"
help
Allow control of L2 Ethernet switch commands. These are supported
by the vsc9953 Ethernet driver at present. Sub-commands allow
operations such as enabling / disabling a port and
viewing/maintaining the filtering database (FDB)
net: Move net command options to the cmd menu Options that controlled the tftp and bootp commands depended on their commands, but lived in the net menu. Move them so they are in a consistent location. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Chris Packham <judge.packham@gmail.com>
2018-04-13 20:26:32 +00:00
config CMD_PXE
bool "pxe"
select MENU
help
Boot image via network using PXE protocol
Kconfig: cmd: Make networking command dependent on NET Enable networking command only when NET is enabled. And remove selecting NET for CMD_NET Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2018-02-26 15:01:02 +00:00
net: Add new wol command - Wake on LAN Add a new command 'wol': Wait for an incoming Wake-on-LAN packet or time out if no WoL packed is received. If the WoL packet contains a password, it is saved in the environment variable 'wolpassword' using the etherwake format (dot or colon separated decimals). Intended use case: a networked device should boot an alternate image. It's attached to a network on a client site, modifying the DHCP server configuration or setup of a tftp server is not allowed. After power on the device waits a few seconds for a WoL packet. If a packet is received, the device boots the alternate image. Otherwise it boots the default image. This method is a simple way to interact with a system via network even if only the MAC address is known. Tools to send WoL packets are available on all common platforms. Some Ethernet drivers seem to pad the incoming packet. The additional padding bytes might be recognized as Wake-on-LAN password bytes. By default enabled in pengwyn_defconfig. Signed-off-by: Lothar Felten <lothar.felten@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-06-22 20:29:54 +00:00
config CMD_WOL
bool "wol"
help
Wait for wake-on-lan Magic Packet
net: Make CMD_NET a menuconfig Previously, CMD_NET was an alias for 2 commands (bootp and tftpboot) and they we not able to be disabled. Separate out those 2 commands and move CMD_NET up to the menu level, which more accurately represents the code. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Duncan Hare <dh@synoia.com>
2018-04-13 20:26:30 +00:00
endif
Move all command code into its own directory There are a lot of unrelated files in common, including all of the commands. Moving them into their own directory makes them easier to find and is more logical. Some commands include non-command code, such as cmd_scsi.c. This should be sorted out at some point so that the function can be enabled with or without the associated command. Unfortunately, with m68k I get this error: m68k: + M5329AFEE +arch/m68k/cpu/mcf532x/start.o: In function `_start': +arch/m68k/cpu/mcf532x/start.S:159:(.text+0x452): relocation truncated to fit: R_68K_PC16 against symbol `board_init_f' defined in .text.board_init_f section in common/built-in.o I hope someone can shed some light on what this means. I hope it isn't depending on the position of code in the image. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de> Acked-by: Stefan Roese <sr@denx.de> Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
2016-01-18 03:53:51 +00:00
menu "Misc commands"
Convert CONFIG_CMD_BMP to Kconfig This converts the following to Kconfig: CONFIG_CMD_BMP Signed-off-by: Simon Glass <sjg@chromium.org> [trini: Add depends on LCD || DM_VIDEO || VIDEO] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-04-27 04:27:55 +00:00
config CMD_BMP
bool "Enable 'bmp' command"
depends on LCD || DM_VIDEO || VIDEO
help
Kconfig: fix a typo in the description of bmp command. Signed-off-by: Andrius Štikonas <andrius@stikonas.eu>
2019-09-23 21:43:41 +00:00
This provides a way to obtain information about a BMP-format image
Convert CONFIG_CMD_BMP to Kconfig This converts the following to Kconfig: CONFIG_CMD_BMP Signed-off-by: Simon Glass <sjg@chromium.org> [trini: Add depends on LCD || DM_VIDEO || VIDEO] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-04-27 04:27:55 +00:00
and to display it. BMP (which presumably stands for BitMaP) is a
file format defined by Microsoft which supports images of various
depths, formats and compression methods. Headers on the file
determine the formats used. This command can be used by first loading
the image into RAM, then using this command to look at it or display
it.
bootcount: Add bootcount command Add a command to manipulate the bootcounter. This is useful if you can run device recovery from inside U-Boot and need to reset the bootcounter after executing that process as part of altbootcmd. Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2018-05-12 05:49:47 +00:00
config CMD_BOOTCOUNT
bool "bootcount"
depends on BOOTCOUNT_LIMIT
help
Enable the bootcount command, which allows interrogation and
reset of the bootcounter.
Convert CONFIG_CMD_BSP to Kconfig This converts the following to Kconfig: CONFIG_CMD_BSP Signed-off-by: Simon Glass <sjg@chromium.org>
2017-04-27 04:27:56 +00:00
config CMD_BSP
bool "Enable board-specific commands"
help
(deprecated: instead, please define a Kconfig option for each command)
Some boards have board-specific commands which are only enabled
during developemnt and need to be turned off for production. This
option provides a way to control this. The commands that are enabled
vary depending on the board.
drivers: block: add block device cache Add a block device cache to speed up repeated reads of block devices by various filesystems. This small amount of cache can dramatically speed up filesystem operations by skipping repeated reads of common areas of a block device (typically directory structures). This has shown to have some benefit on FAT filesystem operations of loading a kernel and RAM disk, but more dramatic benefits on ext4 filesystems when the kernel and/or RAM disk are spread across multiple extent header structures as described in commit fc0fc50. The cache is implemented through a minimal list (block_cache) maintained in most-recently-used order and count of the current number of entries (cache_count). It uses a maximum block count setting to prevent copies of large block reads and an upper bound on the number of cached areas. The maximum number of entries in the cache defaults to 32 and the maximum number of blocks per cache entry has a default of 2, which has shown to produce the best results on testing of ext4 and FAT filesystems. The 'blkcache' command (enabled through CONFIG_CMD_BLOCK_CACHE) allows changing these values and can be used to tune for a particular filesystem layout. Signed-off-by: Eric Nelson <eric@nelint.com>
2016-03-28 17:05:44 +00:00
config CMD_BLOCK_CACHE
bool "blkcache - control and stats for block cache"
depends on BLOCK_CACHE
default y if BLOCK_CACHE
help
Enable the blkcache command, which can be used to control the
operation of the cache functions.
This is most useful when fine-tuning the operation of the cache
during development, but also allows the cache to be disabled when
it might hurt performance (e.g. when using the ums command).
cmd: button: add a new 'button' command Adds a command 'button' that provides the list of buttons supported by the board, and the state of a button. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2020-07-24 16:19:47 +00:00
config CMD_BUTTON
bool "button"
depends on BUTTON
default y if BUTTON
help
Enable the 'button' command which allows to get the status of
buttons supported by the board. The buttonss can be listed with
'button list' and state can be known with 'button <label>'.
Any button drivers can be controlled with this command, e.g.
button_gpio.
cmd: Kconfig: Add a Kconfig options for a few CMD Add the following CMD options to Kconfig: CMD_BOOTZ CMD_ASKENV CMD_GREPENV CMD_USB_MASS_STORAGE CMD_FAT CMD_MII CMD_CACHE CMD_DFU CMD_EXT2 CMD_EXT4 CMD_EXT4_WRITE CMD_FS_GENERIC CMD_MMC Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> [trini: Don't make CMD_USB_MASS_STORAGE nor CMD_DFU depend on CMD_USB] Signed-off-by: Tom Rini <trini@konsulko.com>
2016-04-21 14:05:23 +00:00
config CMD_CACHE
bool "icache or dcache"
help
Enable the "icache" and "dcache" commands
cmd: add conitrace command The 'conitrace' command prints the codes received from the console input as hexadecimal numbers. This developer utility is useful for testing the handling of special keys by keyboard drivers. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2018-09-07 17:43:11 +00:00
config CMD_CONITRACE
bool "conitrace - trace console input codes"
help
Enable the 'conitrace' command which displays the codes received
from the console input as hexadecimal numbers.
cmd: add clear screen 'cls' command Add common clear screen command for configurations CONFIG_DM_VIDEO, CONFIG_LCD and CONFIG_CFB_CONSOLE. Remove the existing cls command implementation from lcd.c code and activate the command for all boards enabling CONFIG_LCD for compatibility reasons. Signed-off-by: Anatolij Gustschin <agust@denx.de> Tested-by: Patrick.Delaunay <patrick.delaunay@free.fr>
2018-12-01 09:47:20 +00:00
config CMD_CLS
bool "Enable clear screen command 'cls'"
depends on CFB_CONSOLE || DM_VIDEO || LCD || VIDEO
default y if LCD
help
Enable the 'cls' command which clears the screen contents
on video frame buffer.
cmd: add efidebug command Currently, there is no easy way to add or modify UEFI variables. In particular, bootmgr supports BootOrder/BootXXXX variables, it is quite hard to define them as u-boot variables because they are represented in a complicated and encoded format. The new command, efidebug, helps address these issues and give us more friendly interfaces: * efidebug boot add: add BootXXXX variable * efidebug boot rm: remove BootXXXX variable * efidebug boot dump: display all BootXXXX variables * efidebug boot next: set BootNext variable * efidebug boot order: set/display a boot order (BootOrder) Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-02-25 06:54:38 +00:00
config CMD_EFIDEBUG
bool "efidebug - display/configure UEFI environment"
depends on EFI_LOADER
efi_loader: make device path to text protocol customizable The device path to text protocol is not needed for EBBR compliance. So let's make it a customizable option. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-11 07:53:33 +00:00
select EFI_DEVICE_PATH_TO_TEXT
cmd: add efidebug command Currently, there is no easy way to add or modify UEFI variables. In particular, bootmgr supports BootOrder/BootXXXX variables, it is quite hard to define them as u-boot variables because they are represented in a complicated and encoded format. The new command, efidebug, helps address these issues and give us more friendly interfaces: * efidebug boot add: add BootXXXX variable * efidebug boot rm: remove BootXXXX variable * efidebug boot dump: display all BootXXXX variables * efidebug boot next: set BootNext variable * efidebug boot order: set/display a boot order (BootOrder) Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-02-25 06:54:38 +00:00
default n
help
Enable the 'efidebug' command which provides a subset of UEFI
shell utility with simplified functionality. It will be useful
particularly for managing boot parameters as well as examining
various EFI status for debugging.
cmd: add exception command The 'exception' command allows to test exception handling. This implementation supports ARM, x86, RISC-V and the following exceptions: * 'breakpoint' - prefetch abort exception (ARM 32bit only) * 'unaligned' - data abort exception (ARM only) * 'undefined' - undefined instruction exception Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2018-12-26 16:20:35 +00:00
config CMD_EXCEPTION
bool "exception - raise exception"
cmd: sandbox: implement exception command Implement the commands * exception undefined - execute an illegal instruction * exception sigsegv - cause a segment violation Here is a possible output: => exception undefined Illegal instruction pc = 0x55eb8d0a7575, pc_reloc = 0x57575 Resetting ... Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-11-11 23:29:57 +00:00
depends on ARM || RISCV || SANDBOX || X86
cmd: add exception command The 'exception' command allows to test exception handling. This implementation supports ARM, x86, RISC-V and the following exceptions: * 'breakpoint' - prefetch abort exception (ARM 32bit only) * 'unaligned' - data abort exception (ARM only) * 'undefined' - undefined instruction exception Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2018-12-26 16:20:35 +00:00
help
Enable the 'exception' command which allows to raise an exception.
dm: led: Add a new 'led' command When driver model is used for LEDs, provide a command to allow LED access. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Ziping Chen <techping.chan@gmail.com>
2017-04-10 17:34:59 +00:00
config CMD_LED
bool "led"
cmd: Kconfig: LED command depends on LED subsystems Without CONFIG_LED, we get cmd/built-in.o: In function `show_led_state': cmd/led.c:40: undefined reference to `led_get_state' cmd/built-in.o: In function `do_led': cmd/led.c:99: undefined reference to `led_get_by_label' cmd/led.c:108: undefined reference to `led_set_state' Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2019-01-03 08:08:42 +00:00
depends on LED
dm: led: Add a new 'led' command When driver model is used for LEDs, provide a command to allow LED access. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Ziping Chen <techping.chan@gmail.com>
2017-04-10 17:34:59 +00:00
default y if LED
help
Enable the 'led' command which allows for control of LEDs supported
by the board. The LEDs can be listed with 'led list' and controlled
with led on/off/togle/blink. Any LED drivers can be controlled with
this command, e.g. led_gpio.
cmd: add Kconfig option for 'date' command Signed-off-by: Chris Packham <judge.packham@gmail.com> [trini: default y if DM_RTC, re-sync] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-04-29 03:20:28 +00:00
config CMD_DATE
bool "date"
default y if DM_RTC
rtc: move date.c from drivers/rtc/ to lib/ In the next commit, rtc_mktime(), for compatibility with linux, will be implemented using rtc_mktime(), which is no longer drivers/rtc specific. So move this file under lib/. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
2019-11-13 00:44:49 +00:00
select LIB_DATE
cmd: add Kconfig option for 'date' command Signed-off-by: Chris Packham <judge.packham@gmail.com> [trini: default y if DM_RTC, re-sync] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-04-29 03:20:28 +00:00
help
Enable the 'date' command for getting/setting the time/date in RTC
devices.
rtc: add rtc command Mostly as an aid for debugging RTC drivers, provide a command that can be used to read/write arbitrary registers (assuming the driver provides the read/write methods or their single-register-at-a-time variants). Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Schocher <hs@denx.de> Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
2020-07-06 20:01:15 +00:00
config CMD_RTC
bool "rtc"
depends on DM_RTC
help
Enable the 'rtc' command for low-level access to RTC devices.
Move all command code into its own directory There are a lot of unrelated files in common, including all of the commands. Moving them into their own directory makes them easier to find and is more logical. Some commands include non-command code, such as cmd_scsi.c. This should be sorted out at some point so that the function can be enabled with or without the associated command. Unfortunately, with m68k I get this error: m68k: + M5329AFEE +arch/m68k/cpu/mcf532x/start.o: In function `_start': +arch/m68k/cpu/mcf532x/start.S:159:(.text+0x452): relocation truncated to fit: R_68K_PC16 against symbol `board_init_f' defined in .text.board_init_f section in common/built-in.o I hope someone can shed some light on what this means. I hope it isn't depending on the position of code in the image. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de> Acked-by: Stefan Roese <sr@denx.de> Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
2016-01-18 03:53:51 +00:00
config CMD_TIME
bool "time"
help
Run commands and summarize execution time.
Convert CONFIG_CMD_GETTIME to Kconfig This converts the following to Kconfig: CONFIG_CMD_GETTIME Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-05-17 09:25:23 +00:00
config CMD_GETTIME
bool "gettime - read elapsed time"
help
Enable the 'gettime' command which reads the elapsed time since
U-Boot started running. This shows the time in seconds and
milliseconds. See also the 'bootstage' command which provides more
flexibility for boot timing.
cmd: add rng command For the RNG uclass we currently only have a test working on the sandbox. Provide a command to test the hardware random number generator on non-sandbox systems. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-12-24 21:17:37 +00:00
config CMD_RNG
bool "rng command"
depends on DM_RNG
select HEXDUMP
help
Print bytes from the hardware random number generator.
cmd: Rename CMD_MISC to CMD_SLEEP The "cmd/Kconfig" has a TODO description for CMD_MISC that it should really be named as CMD_SLEEP. Change it in the whole source tree. Signed-off-by: Bin Meng <bin.meng@windriver.com>
2020-10-13 10:45:05 +00:00
config CMD_SLEEP
Move all command code into its own directory There are a lot of unrelated files in common, including all of the commands. Moving them into their own directory makes them easier to find and is more logical. Some commands include non-command code, such as cmd_scsi.c. This should be sorted out at some point so that the function can be enabled with or without the associated command. Unfortunately, with m68k I get this error: m68k: + M5329AFEE +arch/m68k/cpu/mcf532x/start.o: In function `_start': +arch/m68k/cpu/mcf532x/start.S:159:(.text+0x452): relocation truncated to fit: R_68K_PC16 against symbol `board_init_f' defined in .text.board_init_f section in common/built-in.o I hope someone can shed some light on what this means. I hope it isn't depending on the position of code in the image. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de> Acked-by: Stefan Roese <sr@denx.de> Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
2016-01-18 03:53:51 +00:00
bool "sleep"
default y
help
Delay execution for some time
cmd: Kconfig: Move CONFIG_MP to Kconfig This patch moves CONFIG_MP to Kconfig Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-06-19 10:24:23 +00:00
config MP
bool "support for multiprocessor"
help
This provides an option to brinup
different processors in multiprocessor
cases.
Move all command code into its own directory There are a lot of unrelated files in common, including all of the commands. Moving them into their own directory makes them easier to find and is more logical. Some commands include non-command code, such as cmd_scsi.c. This should be sorted out at some point so that the function can be enabled with or without the associated command. Unfortunately, with m68k I get this error: m68k: + M5329AFEE +arch/m68k/cpu/mcf532x/start.o: In function `_start': +arch/m68k/cpu/mcf532x/start.S:159:(.text+0x452): relocation truncated to fit: R_68K_PC16 against symbol `board_init_f' defined in .text.board_init_f section in common/built-in.o I hope someone can shed some light on what this means. I hope it isn't depending on the position of code in the image. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de> Acked-by: Stefan Roese <sr@denx.de> Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
2016-01-18 03:53:51 +00:00
config CMD_TIMER
bool "timer"
help
Access the system timer.
config CMD_SOUND
bool "sound"
depends on SOUND
help
This provides basic access to the U-Boot's sound support. The main
feature is to play a beep.
sound init - set up sound system
sound play - play a sound
cmd: sysboot: Create a sysboot command dedicated file Extract all sysboot command related code from pxe.c to new sysboot.c Update Kconfig to insure that DISTRO_DEFAULT select new CMD_SYSBOOT command. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-11-25 08:07:38 +00:00
config CMD_SYSBOOT
bool "sysboot"
select MENU
help
Boot image via local extlinux.conf file
cmd: qfw: rename qemu_fw_cfg.[c|h] to qfw.[c|h] Make file names consistent with CONFIG_QFW and CONFIG_CMD_QFW Signed-off-by: Miao Yan <yanmiaobest@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-05-23 02:37:17 +00:00
config CMD_QFW
x86: qemu: Move qfw command over to cmd and add Kconfig entry - Move the command portion of arch/x86/cpu/qemu/fw_cfg.c into cmd/qemu_fw_cfg.c - Move arch/x86/include/asm/fw_cfg.h to include/qemu_fw_cfg.h - Rename ACPI table portion to arch/x86/cpu/qemu/acpi_table.c Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-05-06 14:40:22 +00:00
bool "qfw"
x86: qemu: split qfw command interface and qfw core This patch splits qfw command interface and qfw core function into two files, and introduces a new Kconfig option (CONFIG_QFW) for qfw core. Now when qfw command interface is enabled, it will automatically select qfw core. This patch also makes the ACPI table generation select CONFIG_QFW. Signed-off-by: Miao Yan <yanmiaobest@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-05-23 02:37:14 +00:00
select QFW
x86: qemu: Move qfw command over to cmd and add Kconfig entry - Move the command portion of arch/x86/cpu/qemu/fw_cfg.c into cmd/qemu_fw_cfg.c - Move arch/x86/include/asm/fw_cfg.h to include/qemu_fw_cfg.h - Rename ACPI table portion to arch/x86/cpu/qemu/acpi_table.c Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-05-06 14:40:22 +00:00
help
This provides access to the QEMU firmware interface. The main
feature is to allow easy loading of files passed to qemu-system
via -kernel / -initrd
arm64: mvebu: Add bubt command for flash image burn Add support for mvebu bubt command for flash image load, check and burn on boot device. Signed-off-by: Konstantin Porotchkin <kostap@marvell.com> Reviewed-by: Stefan Roese <sr@denx.de> Cc: Stefan Roese <sr@denx.de> Cc: Nadav Haklai <nadavh@marvell.com> Cc: Neta Zur Hershkovits <neta@marvell.com> Cc: Omri Itach <omrii@marvell.com> Cc: Igal Liberman <igall@marvell.com> Cc: Haim Boot <hayim@marvell.com> Cc: Hanna Hawa <hannah@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
2016-12-08 10:22:28 +00:00
cmd: Add command to display or save Linux PStore dumps This patch adds a new pstore command allowing to display or save ramoops logs (oops, panic, console, ftrace and user) generated by a previous kernel crash. PStore parameters can be set in U-Boot configuration file, or at run-time using "pstore set" command. Records size should be the same as the ones used by kernel, and should be a power of 2. This command allows: - to display uncompressed logs - to save compressed or uncompressed logs, compressed logs are saved as a compressed stream, it may need some work to be able to decompress it, e.g. adding a fake header: "printf "\x1f\x8b\x08\x00\x00\x00\x00\x00\x00\x00" | cat - dmesg-ramoops-0.enc.z | gzip -dc" - ECC part is not used to check memory corruption - only 1st FTrace log is displayed or saved Signed-off-by: Frédéric Danis <frederic.danis@collabora.com> [trini: Minor updates for current design, correct spacing in rST] Signed-off-by: Tom Rini <trini@konsulko.com> Cc: Heinrich Schuchardt <xypron.glpk@gmx.de> Cc: Wolfgang Denk <wd@denx.de> Cc: Heiko Schocher <hs@denx.de>
2020-03-20 09:59:22 +00:00
config CMD_PSTORE
bool "pstore"
help
This provides access to Linux PStore with Rammoops backend. The main
feature is to allow to display or save PStore records.
See doc/pstore.rst for more information.
if CMD_PSTORE
config CMD_PSTORE_MEM_ADDR
hex "Memory Address"
depends on CMD_PSTORE
help
Base addr used for PStore ramoops memory, should be identical to
ramoops.mem_address parameter used by kernel
config CMD_PSTORE_MEM_SIZE
hex "Memory size"
depends on CMD_PSTORE
default "0x10000"
help
Size of PStore ramoops memory, should be identical to ramoops.mem_size
parameter used by kernel, a power of 2 and larger than the sum of the
record sizes
config CMD_PSTORE_RECORD_SIZE
hex "Dump record size"
depends on CMD_PSTORE
default "0x1000"
help
Size of each dump done on oops/panic, should be identical to
ramoops.record_size parameter used by kernel and a power of 2
Must be non-zero
config CMD_PSTORE_CONSOLE_SIZE
hex "Kernel console log size"
depends on CMD_PSTORE
default "0x1000"
help
Size of kernel console log, should be identical to
ramoops.console_size parameter used by kernel and a power of 2
Must be non-zero
config CMD_PSTORE_FTRACE_SIZE
hex "FTrace log size"
depends on CMD_PSTORE
default "0x1000"
help
Size of ftrace log, should be identical to ramoops.ftrace_size
parameter used by kernel and a power of 2
config CMD_PSTORE_PMSG_SIZE
hex "User space message log size"
depends on CMD_PSTORE
default "0x1000"
help
Size of user space message log, should be identical to
ramoops.pmsg_size parameter used by kernel and a power of 2
config CMD_PSTORE_ECC_SIZE
int "ECC size"
depends on CMD_PSTORE
default "0"
help
if non-zero, the option enables ECC support and specifies ECC buffer
size in bytes (1 is a special value, means 16 bytes ECC), should be
identical to ramoops.ramoops_ecc parameter used by kernel
endif
arm64: mvebu: Add bubt command for flash image burn Add support for mvebu bubt command for flash image load, check and burn on boot device. Signed-off-by: Konstantin Porotchkin <kostap@marvell.com> Reviewed-by: Stefan Roese <sr@denx.de> Cc: Stefan Roese <sr@denx.de> Cc: Nadav Haklai <nadavh@marvell.com> Cc: Neta Zur Hershkovits <neta@marvell.com> Cc: Omri Itach <omrii@marvell.com> Cc: Igal Liberman <igall@marvell.com> Cc: Haim Boot <hayim@marvell.com> Cc: Hanna Hawa <hannah@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
2016-12-08 10:22:28 +00:00
source "cmd/mvebu/Kconfig"
Convert CONFIG_CMD_TERMINAL to Kconfig This converts the following to Kconfig: CONFIG_CMD_TERMINAL Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-08-04 22:34:55 +00:00
config CMD_TERMINAL
bool "terminal - provides a way to attach a serial terminal"
help
Provides a 'cu'-like serial terminal command. This can be used to
access other serial ports from the system console. The terminal
is very simple with no special processing of characters. As with
cu, you can press ~. (tilde followed by period) to exit.
Convert CONFIG_CMD_UUID to Kconfig This converts the following to Kconfig: CONFIG_CMD_UUID Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-08-04 22:35:02 +00:00
config CMD_UUID
bool "uuid, guid - generation of unique IDs"
Convert LIB_UUID to Kconfig config_fallback.h has some logic that checks a variety of options and selects LIB_UUID if it hasn't already been selected. This will all LIB_UUID in Kconfig and select this option for the list of options to allow us to remove the logic from fallbacks Signed-off-by: Adam Ford <aford173@gmail.com>
2018-02-06 18:14:28 +00:00
select LIB_UUID
Convert CONFIG_CMD_UUID to Kconfig This converts the following to Kconfig: CONFIG_CMD_UUID Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-08-04 22:35:02 +00:00
help
This enables two commands:
uuid - generate random Universally Unique Identifier
guid - generate Globally Unique Identifier based on random UUID
The two commands are very similar except for the endianness of the
output.
Move all command code into its own directory There are a lot of unrelated files in common, including all of the commands. Moving them into their own directory makes them easier to find and is more logical. Some commands include non-command code, such as cmd_scsi.c. This should be sorted out at some point so that the function can be enabled with or without the associated command. Unfortunately, with m68k I get this error: m68k: + M5329AFEE +arch/m68k/cpu/mcf532x/start.o: In function `_start': +arch/m68k/cpu/mcf532x/start.S:159:(.text+0x452): relocation truncated to fit: R_68K_PC16 against symbol `board_init_f' defined in .text.board_init_f section in common/built-in.o I hope someone can shed some light on what this means. I hope it isn't depending on the position of code in the image. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de> Acked-by: Stefan Roese <sr@denx.de> Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
2016-01-18 03:53:51 +00:00
endmenu
arm: keystone: Move cmd_ddr3 to a common place Move cmd_ddr3 to cmd/ti in order to make it build for non-keystone TI platforms. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> [trini: Rename to ddr3.c not cmd_ddr3.c] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-12-29 06:17:49 +00:00
source "cmd/ti/Kconfig"
Move all command code into its own directory There are a lot of unrelated files in common, including all of the commands. Moving them into their own directory makes them easier to find and is more logical. Some commands include non-command code, such as cmd_scsi.c. This should be sorted out at some point so that the function can be enabled with or without the associated command. Unfortunately, with m68k I get this error: m68k: + M5329AFEE +arch/m68k/cpu/mcf532x/start.o: In function `_start': +arch/m68k/cpu/mcf532x/start.S:159:(.text+0x452): relocation truncated to fit: R_68K_PC16 against symbol `board_init_f' defined in .text.board_init_f section in common/built-in.o I hope someone can shed some light on what this means. I hope it isn't depending on the position of code in the image. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de> Acked-by: Stefan Roese <sr@denx.de> Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
2016-01-18 03:53:51 +00:00
config CMD_BOOTSTAGE
bool "Enable the 'bootstage' command"
depends on BOOTSTAGE
help
Add a 'bootstage' command which supports printing a report
and un/stashing of bootstage data.
menu "Power commands"
config CMD_PMIC
bool "Enable Driver Model PMIC command"
depends on DM_PMIC
help
This is the pmic command, based on a driver model pmic's API.
Command features are unchanged:
- list - list pmic devices
- pmic dev <id> - show or [set] operating pmic device (NEW)
- pmic dump - dump registers
- pmic read address - read byte of register at address
- pmic write address - write byte to register at address
The only one change for this command is 'dev' subcommand.
config CMD_REGULATOR
bool "Enable Driver Model REGULATOR command"
depends on DM_REGULATOR
help
This command is based on driver model regulator's API.
User interface features:
- list - list regulator devices
- regulator dev <id> - show or [set] operating regulator device
- regulator info - print constraints info
- regulator status - print operating status
- regulator value <val] <-f> - print/[set] voltage value [uV]
- regulator current <val> - print/[set] current value [uA]
- regulator mode <id> - print/[set] operating mode id
- regulator enable - enable the regulator output
- regulator disable - disable the regulator output
The '-f' (force) option can be used for set the value which exceeds
the limits, which are found in device-tree and are kept in regulator's
dm: treewide: Rename 'platdata' variables to just 'plat' We use 'priv' for private data but often use 'platdata' for platform data. We can't really use 'pdata' since that is ambiguous (it could mean private or platform data). Rename some of the latter variables to end with 'plat' for consistency. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-03 23:55:18 +00:00
uclass plat structure.
Move all command code into its own directory There are a lot of unrelated files in common, including all of the commands. Moving them into their own directory makes them easier to find and is more logical. Some commands include non-command code, such as cmd_scsi.c. This should be sorted out at some point so that the function can be enabled with or without the associated command. Unfortunately, with m68k I get this error: m68k: + M5329AFEE +arch/m68k/cpu/mcf532x/start.o: In function `_start': +arch/m68k/cpu/mcf532x/start.S:159:(.text+0x452): relocation truncated to fit: R_68K_PC16 against symbol `board_init_f' defined in .text.board_init_f section in common/built-in.o I hope someone can shed some light on what this means. I hope it isn't depending on the position of code in the image. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de> Acked-by: Stefan Roese <sr@denx.de> Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
2016-01-18 03:53:51 +00:00
endmenu
menu "Security commands"
Convert CONFIG_CMD_AES et al to Kconfig This converts the following to Kconfig: CONFIG_CMD_AES CONFIG_AES Signed-off-by: Simon Glass <sjg@chromium.org> [trini: Add select AES to CMD_AES] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-04-27 04:27:49 +00:00
config CMD_AES
bool "Enable the 'aes' command"
select AES
help
This provides a means to encrypt and decrypt data using the AES
(Advanced Encryption Standard). This algorithm uses a symetric key
and is widely used as a streaming cipher. Different key lengths are
supported by the algorithm but this command only supports 128 bits
at present.
Convert CONFIG_CMD_BLOB to Kconfig This converts the following to Kconfig: CONFIG_CMD_BLOB Signed-off-by: Simon Glass <sjg@chromium.org> [trini: Add imply CMD_BLOB under CHAIN_OF_TRUST] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-04-27 04:27:53 +00:00
config CMD_BLOB
bool "Enable the 'blob' command"
help
This is used with the Freescale secure boot mechanism.
Freescale's SEC block has built-in Blob Protocol which provides
a method for protecting user-defined data across system power
cycles. SEC block protects data in a data structure called a Blob,
which provides both confidentiality and integrity protection.
Encapsulating data as a blob
Each time that the Blob Protocol is used to protect data, a
different randomly generated key is used to encrypt the data.
This random key is itself encrypted using a key which is derived
from SoC's non-volatile secret key and a 16 bit Key identifier.
The resulting encrypted key along with encrypted data is called a
blob. The non-volatile secure key is available for use only during
secure boot.
During decapsulation, the reverse process is performed to get back
the original data.
Sub-commands:
Kconfig: Replace spaces with tabs and missing newline Trivial Kconfig cleanup. Use tabs instead of spaces and every Kconfig entry should be separated by newline. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
2018-07-23 13:55:12 +00:00
blob enc - encapsulating data as a cryptgraphic blob
Convert CONFIG_CMD_BLOB to Kconfig This converts the following to Kconfig: CONFIG_CMD_BLOB Signed-off-by: Simon Glass <sjg@chromium.org> [trini: Add imply CMD_BLOB under CHAIN_OF_TRUST] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-04-27 04:27:53 +00:00
blob dec - decapsulating cryptgraphic blob to get the data
Syntax:
blob enc src dst len km
Encapsulate and create blob of data $len bytes long
at address $src and store the result at address $dst.
$km is the 16 byte key modifier is also required for
generation/use as key for cryptographic operation. Key
modifier should be 16 byte long.
blob dec src dst len km
Decapsulate the blob of data at address $src and
store result of $len byte at addr $dst.
$km is the 16 byte key modifier is also required for
generation/use as key for cryptographic operation. Key
modifier should be 16 byte long.
Convert CONFIG_CMD_HASH to Kconfig This converts the following to Kconfig: CONFIG_CMD_HASH Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com> [trini: Rework slightly, enable on some boards again] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-05-17 09:25:25 +00:00
config CMD_HASH
bool "Support 'hash' command"
Kconfig: Add CONFIG_HASH to enable hashing API At present CONFIG_CMD_HASH enables the 'hash' command which also brings in the hashing API. Some boards may wish to enable the API without the command. Add a separate CONFIG to permit this. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-05-17 15:05:34 +00:00
select HASH
Convert CONFIG_CMD_HASH to Kconfig This converts the following to Kconfig: CONFIG_CMD_HASH Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com> [trini: Rework slightly, enable on some boards again] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-05-17 09:25:25 +00:00
help
This provides a way to hash data in memory using various supported
algorithms (such as SHA1, MD5, CRC32). The computed digest can be
saved to memory or to an environment variable. It is also possible
to verify a hash against data in memory.
arm64: Add SMC and HVC commands This patch adds smc and hvc commands, that allow issuing Secure Monitor Calls and Hypervisor Calls conforming to the ARM SMC Calling Convention. Add Kconfig items to allow each command can be individually enabled. Signed-off-by: Michalis Pappas <mpappas@fastmail.fm> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-04-13 07:40:57 +00:00
config CMD_HVC
bool "Support the 'hvc' command"
depends on ARM_SMCCC
help
Allows issuing Hypervisor Calls (HVCs). Mostly useful for
development and testing.
config CMD_SMC
bool "Support the 'smc' command"
depends on ARM_SMCCC
help
Allows issuing Secure Monitor Calls (SMCs). Mostly useful for
development and testing.
Kconfig: Finish migration of hashing commands Currently these (board agnostic) commands cannot be selected using menuconfig and friends. Fix this the obvious way. As part of this, don't muddle the meaning of CONFIG_HASH_VERIFY to mean both 'hash -v' and "we have a hashing command" as this makes the Kconfig logic odd. Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> [trini: Re-apply, add imply for a few cases, run moveconfig.py, also migrate CRC32_VERIFY] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-05-19 16:26:58 +00:00
config HASH_VERIFY
bool "hash -v"
depends on CMD_HASH
help
Add -v option to verify data against a hash.
tpm: prepare introduction of TPMv2.x support in Kconfig Because both major revisions are not compatible at all, let's make them mutually exclusive in Kconfig. This way we will be sure, when using a command or a library function that it is supported by the right revision. Current drivers are currently prefixed by "tpm_", we will prefix TPMv2.x files by "tpm2_" to make the distinction without moving everything. The Kconfig menu about TPM drivers is now divided into two sections, one for each specification. Compliant drivers with one specification will only show up if this specification _only_ has been selected, otherwise a comment is displayed. Once a driver is selected by the user, it selects automatically a boolean value, that is needed in order to activate the TPM commands. Selecting the TPM commands will automatically select the right command/library files. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com> [trini: Rework deps as TPM_V1 and TPM_V2 depend on TPM, drop TPM_DRIVER_SELECTED] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-15 09:57:05 +00:00
config CMD_TPM_V1
bool
config CMD_TPM_V2
bool
tpmv2: Make it select CMD_LOG The TPMv2 code requires the log functionality, so select it. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-07-28 13:20:12 +00:00
select CMD_LOG
tpm: prepare introduction of TPMv2.x support in Kconfig Because both major revisions are not compatible at all, let's make them mutually exclusive in Kconfig. This way we will be sure, when using a command or a library function that it is supported by the right revision. Current drivers are currently prefixed by "tpm_", we will prefix TPMv2.x files by "tpm2_" to make the distinction without moving everything. The Kconfig menu about TPM drivers is now divided into two sections, one for each specification. Compliant drivers with one specification will only show up if this specification _only_ has been selected, otherwise a comment is displayed. Once a driver is selected by the user, it selects automatically a boolean value, that is needed in order to activate the TPM commands. Selecting the TPM commands will automatically select the right command/library files. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com> [trini: Rework deps as TPM_V1 and TPM_V2 depend on TPM, drop TPM_DRIVER_SELECTED] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-15 09:57:05 +00:00
Move all command code into its own directory There are a lot of unrelated files in common, including all of the commands. Moving them into their own directory makes them easier to find and is more logical. Some commands include non-command code, such as cmd_scsi.c. This should be sorted out at some point so that the function can be enabled with or without the associated command. Unfortunately, with m68k I get this error: m68k: + M5329AFEE +arch/m68k/cpu/mcf532x/start.o: In function `_start': +arch/m68k/cpu/mcf532x/start.S:159:(.text+0x452): relocation truncated to fit: R_68K_PC16 against symbol `board_init_f' defined in .text.board_init_f section in common/built-in.o I hope someone can shed some light on what this means. I hope it isn't depending on the position of code in the image. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de> Acked-by: Stefan Roese <sr@denx.de> Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
2016-01-18 03:53:51 +00:00
config CMD_TPM
bool "Enable the 'tpm' command"
tpm: prepare introduction of TPMv2.x support in Kconfig Because both major revisions are not compatible at all, let's make them mutually exclusive in Kconfig. This way we will be sure, when using a command or a library function that it is supported by the right revision. Current drivers are currently prefixed by "tpm_", we will prefix TPMv2.x files by "tpm2_" to make the distinction without moving everything. The Kconfig menu about TPM drivers is now divided into two sections, one for each specification. Compliant drivers with one specification will only show up if this specification _only_ has been selected, otherwise a comment is displayed. Once a driver is selected by the user, it selects automatically a boolean value, that is needed in order to activate the TPM commands. Selecting the TPM commands will automatically select the right command/library files. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com> [trini: Rework deps as TPM_V1 and TPM_V2 depend on TPM, drop TPM_DRIVER_SELECTED] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-15 09:57:05 +00:00
depends on TPM_V1 || TPM_V2
select CMD_TPM_V1 if TPM_V1
select CMD_TPM_V2 if TPM_V2
Move all command code into its own directory There are a lot of unrelated files in common, including all of the commands. Moving them into their own directory makes them easier to find and is more logical. Some commands include non-command code, such as cmd_scsi.c. This should be sorted out at some point so that the function can be enabled with or without the associated command. Unfortunately, with m68k I get this error: m68k: + M5329AFEE +arch/m68k/cpu/mcf532x/start.o: In function `_start': +arch/m68k/cpu/mcf532x/start.S:159:(.text+0x452): relocation truncated to fit: R_68K_PC16 against symbol `board_init_f' defined in .text.board_init_f section in common/built-in.o I hope someone can shed some light on what this means. I hope it isn't depending on the position of code in the image. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de> Acked-by: Stefan Roese <sr@denx.de> Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
2016-01-18 03:53:51 +00:00
help
This provides a means to talk to a TPM from the command line. A wide
range of commands if provided - see 'tpm help' for details. The
command requires a suitable TPM on your board and the correct driver
must be enabled.
tpm: prepare introduction of TPMv2.x support in Kconfig Because both major revisions are not compatible at all, let's make them mutually exclusive in Kconfig. This way we will be sure, when using a command or a library function that it is supported by the right revision. Current drivers are currently prefixed by "tpm_", we will prefix TPMv2.x files by "tpm2_" to make the distinction without moving everything. The Kconfig menu about TPM drivers is now divided into two sections, one for each specification. Compliant drivers with one specification will only show up if this specification _only_ has been selected, otherwise a comment is displayed. Once a driver is selected by the user, it selects automatically a boolean value, that is needed in order to activate the TPM commands. Selecting the TPM commands will automatically select the right command/library files. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com> [trini: Rework deps as TPM_V1 and TPM_V2 depend on TPM, drop TPM_DRIVER_SELECTED] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-15 09:57:05 +00:00
if CMD_TPM
Move all command code into its own directory There are a lot of unrelated files in common, including all of the commands. Moving them into their own directory makes them easier to find and is more logical. Some commands include non-command code, such as cmd_scsi.c. This should be sorted out at some point so that the function can be enabled with or without the associated command. Unfortunately, with m68k I get this error: m68k: + M5329AFEE +arch/m68k/cpu/mcf532x/start.o: In function `_start': +arch/m68k/cpu/mcf532x/start.S:159:(.text+0x452): relocation truncated to fit: R_68K_PC16 against symbol `board_init_f' defined in .text.board_init_f section in common/built-in.o I hope someone can shed some light on what this means. I hope it isn't depending on the position of code in the image. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de> Acked-by: Stefan Roese <sr@denx.de> Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
2016-01-18 03:53:51 +00:00
config CMD_TPM_TEST
bool "Enable the 'tpm test' command"
tpm: prepare introduction of TPMv2.x support in Kconfig Because both major revisions are not compatible at all, let's make them mutually exclusive in Kconfig. This way we will be sure, when using a command or a library function that it is supported by the right revision. Current drivers are currently prefixed by "tpm_", we will prefix TPMv2.x files by "tpm2_" to make the distinction without moving everything. The Kconfig menu about TPM drivers is now divided into two sections, one for each specification. Compliant drivers with one specification will only show up if this specification _only_ has been selected, otherwise a comment is displayed. Once a driver is selected by the user, it selects automatically a boolean value, that is needed in order to activate the TPM commands. Selecting the TPM commands will automatically select the right command/library files. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com> [trini: Rework deps as TPM_V1 and TPM_V2 depend on TPM, drop TPM_DRIVER_SELECTED] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-15 09:57:05 +00:00
depends on TPM_V1
Move all command code into its own directory There are a lot of unrelated files in common, including all of the commands. Moving them into their own directory makes them easier to find and is more logical. Some commands include non-command code, such as cmd_scsi.c. This should be sorted out at some point so that the function can be enabled with or without the associated command. Unfortunately, with m68k I get this error: m68k: + M5329AFEE +arch/m68k/cpu/mcf532x/start.o: In function `_start': +arch/m68k/cpu/mcf532x/start.S:159:(.text+0x452): relocation truncated to fit: R_68K_PC16 against symbol `board_init_f' defined in .text.board_init_f section in common/built-in.o I hope someone can shed some light on what this means. I hope it isn't depending on the position of code in the image. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de> Acked-by: Stefan Roese <sr@denx.de> Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
2016-01-18 03:53:51 +00:00
help
tpm: prepare introduction of TPMv2.x support in Kconfig Because both major revisions are not compatible at all, let's make them mutually exclusive in Kconfig. This way we will be sure, when using a command or a library function that it is supported by the right revision. Current drivers are currently prefixed by "tpm_", we will prefix TPMv2.x files by "tpm2_" to make the distinction without moving everything. The Kconfig menu about TPM drivers is now divided into two sections, one for each specification. Compliant drivers with one specification will only show up if this specification _only_ has been selected, otherwise a comment is displayed. Once a driver is selected by the user, it selects automatically a boolean value, that is needed in order to activate the TPM commands. Selecting the TPM commands will automatically select the right command/library files. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com> [trini: Rework deps as TPM_V1 and TPM_V2 depend on TPM, drop TPM_DRIVER_SELECTED] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-15 09:57:05 +00:00
This provides a a series of tests to confirm that the TPMv1.x is
working correctly. The tests cover initialisation, non-volatile RAM,
extend, global lock and checking that timing is within expectations.
The tests pass correctly on Infineon TPMs but may need to be adjusted
Move all command code into its own directory There are a lot of unrelated files in common, including all of the commands. Moving them into their own directory makes them easier to find and is more logical. Some commands include non-command code, such as cmd_scsi.c. This should be sorted out at some point so that the function can be enabled with or without the associated command. Unfortunately, with m68k I get this error: m68k: + M5329AFEE +arch/m68k/cpu/mcf532x/start.o: In function `_start': +arch/m68k/cpu/mcf532x/start.S:159:(.text+0x452): relocation truncated to fit: R_68K_PC16 against symbol `board_init_f' defined in .text.board_init_f section in common/built-in.o I hope someone can shed some light on what this means. I hope it isn't depending on the position of code in the image. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de> Acked-by: Stefan Roese <sr@denx.de> Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
2016-01-18 03:53:51 +00:00
for other devices.
tpm: prepare introduction of TPMv2.x support in Kconfig Because both major revisions are not compatible at all, let's make them mutually exclusive in Kconfig. This way we will be sure, when using a command or a library function that it is supported by the right revision. Current drivers are currently prefixed by "tpm_", we will prefix TPMv2.x files by "tpm2_" to make the distinction without moving everything. The Kconfig menu about TPM drivers is now divided into two sections, one for each specification. Compliant drivers with one specification will only show up if this specification _only_ has been selected, otherwise a comment is displayed. Once a driver is selected by the user, it selects automatically a boolean value, that is needed in order to activate the TPM commands. Selecting the TPM commands will automatically select the right command/library files. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com> [trini: Rework deps as TPM_V1 and TPM_V2 depend on TPM, drop TPM_DRIVER_SELECTED] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-15 09:57:05 +00:00
endif
Move all command code into its own directory There are a lot of unrelated files in common, including all of the commands. Moving them into their own directory makes them easier to find and is more logical. Some commands include non-command code, such as cmd_scsi.c. This should be sorted out at some point so that the function can be enabled with or without the associated command. Unfortunately, with m68k I get this error: m68k: + M5329AFEE +arch/m68k/cpu/mcf532x/start.o: In function `_start': +arch/m68k/cpu/mcf532x/start.S:159:(.text+0x452): relocation truncated to fit: R_68K_PC16 against symbol `board_init_f' defined in .text.board_init_f section in common/built-in.o I hope someone can shed some light on what this means. I hope it isn't depending on the position of code in the image. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de> Acked-by: Stefan Roese <sr@denx.de> Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
2016-01-18 03:53:51 +00:00
endmenu
cmd: cros_ec: Move crosec commands to cmd subdirectory Move crosec commands from drivers/misc/cros_ec.c to cmd/cros_ec.c Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com> Cc: Simon Glass <sjg@chromium.org> Cc: Heiko Schocher <hs@denx.de> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Miao Yan <yanmiaobest@gmail.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Stefan Roese <sr@denx.de> Cc: Przemyslaw Marczak <p.marczak@samsung.com> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Nishanth Menon <nm@ti.com> Cc: u-boot@lists.denx.de
2016-10-05 00:08:08 +00:00
menu "Firmware commands"
config CMD_CROS_EC
bool "Enable crosec command"
depends on CROS_EC
default y
help
Enable command-line access to the Chrome OS EC (Embedded
Controller). This provides the 'crosec' command which has
a number of sub-commands for performing EC tasks such as
updating its flash, accessing a small saved context area
and talking to the I2C bus behind the EC (if there is one).
endmenu
Move all command code into its own directory There are a lot of unrelated files in common, including all of the commands. Moving them into their own directory makes them easier to find and is more logical. Some commands include non-command code, such as cmd_scsi.c. This should be sorted out at some point so that the function can be enabled with or without the associated command. Unfortunately, with m68k I get this error: m68k: + M5329AFEE +arch/m68k/cpu/mcf532x/start.o: In function `_start': +arch/m68k/cpu/mcf532x/start.S:159:(.text+0x452): relocation truncated to fit: R_68K_PC16 against symbol `board_init_f' defined in .text.board_init_f section in common/built-in.o I hope someone can shed some light on what this means. I hope it isn't depending on the position of code in the image. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de> Acked-by: Stefan Roese <sr@denx.de> Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
2016-01-18 03:53:51 +00:00
cmd: Kconfig: Add a Kconfig options for a few CMD Add the following CMD options to Kconfig: CMD_BOOTZ CMD_ASKENV CMD_GREPENV CMD_USB_MASS_STORAGE CMD_FAT CMD_MII CMD_CACHE CMD_DFU CMD_EXT2 CMD_EXT4 CMD_EXT4_WRITE CMD_FS_GENERIC CMD_MMC Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> [trini: Don't make CMD_USB_MASS_STORAGE nor CMD_DFU depend on CMD_USB] Signed-off-by: Tom Rini <trini@konsulko.com>
2016-04-21 14:05:23 +00:00
menu "Filesystem commands"
cmd: Add the 'btrsubvol' command to list BTRFS subvolumes Signed-off-by: Marek Behun <marek.behun@nic.cz> create mode 100644 cmd/btrfs.c
2017-09-03 15:00:30 +00:00
config CMD_BTRFS
bool "Enable the 'btrsubvol' command"
select FS_BTRFS
help
This enables the 'btrsubvol' command to list subvolumes
of a BTRFS filesystem. There are no special commands for
listing BTRFS directories or loading BTRFS files - this
can be done by the generic 'fs' commands (see CMD_FS_GENERIC)
when BTRFS is enabled (see FS_BTRFS).
fs: Convert CONFIG_CMD_CBFS to Kconfig This converts the following to Kconfig: CONFIG_CMD_CBFS Signed-off-by: Simon Glass <sjg@chromium.org> [trini: imply CMD_CBFS on SYS_COREBOOT] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-04-27 04:27:58 +00:00
config CMD_CBFS
bool "Enable the 'cbfs' command"
fs: Kconfig: Add a separate config for FS_CBFS Rather than using CMD_CBFS for both the filesystem and its command, we should have a separate option for each. This allows us to enable CBFS support without the command, if desired, which reduces U-Boot's size slightly. Signed-off-by: Simon Glass <sjg@chromium.org> [trini: imply FS_CBFS on SYS_COREBOOT] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-04-27 04:27:59 +00:00
depends on FS_CBFS
fs: Convert CONFIG_CMD_CBFS to Kconfig This converts the following to Kconfig: CONFIG_CMD_CBFS Signed-off-by: Simon Glass <sjg@chromium.org> [trini: imply CMD_CBFS on SYS_COREBOOT] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-04-27 04:27:58 +00:00
help
Define this to enable support for reading from a Coreboot
filesystem. This is a ROM-based filesystem used for accessing files
on systems that use coreboot as the first boot-loader and then load
U-Boot to actually boot the Operating System. Available commands are
cbfsinit, cbfsinfo, cbfsls and cbfsload.
fs: Convert CONFIG_CMD_CRAMFS to Kconfig This converts the following to Kconfig: CONFIG_CMD_CRAMFS Signed-off-by: Simon Glass <sjg@chromium.org> [trini: imply CMD_CRAMFS for keymile] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-04-27 04:28:03 +00:00
config CMD_CRAMFS
bool "Enable the 'cramfs' command"
fs: Kconfig: Add a separate option for FS_CRAMFS Rather than using CMD_CRAMFS for both the filesystem and its command, we should have a separate option for each. This allows us to enable CRAMFS support without the command, if desired, which reduces U-Boot's size slightly. Signed-off-by: Simon Glass <sjg@chromium.org> [trini: imply FS_CRAMFS for keymile] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-04-27 04:28:04 +00:00
depends on FS_CRAMFS
fs: Convert CONFIG_CMD_CRAMFS to Kconfig This converts the following to Kconfig: CONFIG_CMD_CRAMFS Signed-off-by: Simon Glass <sjg@chromium.org> [trini: imply CMD_CRAMFS for keymile] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-04-27 04:28:03 +00:00
help
This provides commands for dealing with CRAMFS (Compressed ROM
filesystem). CRAMFS is useful when space is tight since files are
compressed. Two commands are provided:
cramfsls - lists files in a cramfs image
cramfsload - loads a file from a cramfs image
cmd: Kconfig: Add a Kconfig options for a few CMD Add the following CMD options to Kconfig: CMD_BOOTZ CMD_ASKENV CMD_GREPENV CMD_USB_MASS_STORAGE CMD_FAT CMD_MII CMD_CACHE CMD_DFU CMD_EXT2 CMD_EXT4 CMD_EXT4_WRITE CMD_FS_GENERIC CMD_MMC Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> [trini: Don't make CMD_USB_MASS_STORAGE nor CMD_DFU depend on CMD_USB] Signed-off-by: Tom Rini <trini@konsulko.com>
2016-04-21 14:05:23 +00:00
config CMD_EXT2
bool "ext2 command support"
fs: Migrate ext4 to Kconfig Migrate the following symbols to Kconfig: CONFIG_FS_EXT4 CONFIG_EXT4_WRITE The definitions in config_fallbacks.h can now be expressed in Kconfig. Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com>
2018-01-05 00:45:17 +00:00
select FS_EXT4
cmd: Kconfig: Add a Kconfig options for a few CMD Add the following CMD options to Kconfig: CMD_BOOTZ CMD_ASKENV CMD_GREPENV CMD_USB_MASS_STORAGE CMD_FAT CMD_MII CMD_CACHE CMD_DFU CMD_EXT2 CMD_EXT4 CMD_EXT4_WRITE CMD_FS_GENERIC CMD_MMC Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> [trini: Don't make CMD_USB_MASS_STORAGE nor CMD_DFU depend on CMD_USB] Signed-off-by: Tom Rini <trini@konsulko.com>
2016-04-21 14:05:23 +00:00
help
Enables EXT2 FS command
config CMD_EXT4
bool "ext4 command support"
fs: Migrate ext4 to Kconfig Migrate the following symbols to Kconfig: CONFIG_FS_EXT4 CONFIG_EXT4_WRITE The definitions in config_fallbacks.h can now be expressed in Kconfig. Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com>
2018-01-05 00:45:17 +00:00
select FS_EXT4
cmd: Kconfig: Add a Kconfig options for a few CMD Add the following CMD options to Kconfig: CMD_BOOTZ CMD_ASKENV CMD_GREPENV CMD_USB_MASS_STORAGE CMD_FAT CMD_MII CMD_CACHE CMD_DFU CMD_EXT2 CMD_EXT4 CMD_EXT4_WRITE CMD_FS_GENERIC CMD_MMC Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> [trini: Don't make CMD_USB_MASS_STORAGE nor CMD_DFU depend on CMD_USB] Signed-off-by: Tom Rini <trini@konsulko.com>
2016-04-21 14:05:23 +00:00
help
Enables EXT4 FS command
config CMD_EXT4_WRITE
depends on CMD_EXT4
bool "ext4 write command support"
fs: Migrate ext4 to Kconfig Migrate the following symbols to Kconfig: CONFIG_FS_EXT4 CONFIG_EXT4_WRITE The definitions in config_fallbacks.h can now be expressed in Kconfig. Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com>
2018-01-05 00:45:17 +00:00
select EXT4_WRITE
cmd: Kconfig: Add a Kconfig options for a few CMD Add the following CMD options to Kconfig: CMD_BOOTZ CMD_ASKENV CMD_GREPENV CMD_USB_MASS_STORAGE CMD_FAT CMD_MII CMD_CACHE CMD_DFU CMD_EXT2 CMD_EXT4 CMD_EXT4_WRITE CMD_FS_GENERIC CMD_MMC Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> [trini: Don't make CMD_USB_MASS_STORAGE nor CMD_DFU depend on CMD_USB] Signed-off-by: Tom Rini <trini@konsulko.com>
2016-04-21 14:05:23 +00:00
help
Enables EXT4 FS write command
config CMD_FAT
bool "FAT command support"
fs: fat: add kbuild configuration support Add Kconfig symbols for various configurations supported by FAT filesystem support code. CONFIG_SUPPORT_VFAT has been left out since its force enabled in include/fat.h and probably should get removed at some point. Signed-off-by: Sekhar Nori <nsekhar@ti.com> [trini: add select FS_FAT for CMD_FAT and SPL_FAT_SUPPORT] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-06-02 12:23:59 +00:00
select FS_FAT
cmd: Kconfig: Add a Kconfig options for a few CMD Add the following CMD options to Kconfig: CMD_BOOTZ CMD_ASKENV CMD_GREPENV CMD_USB_MASS_STORAGE CMD_FAT CMD_MII CMD_CACHE CMD_DFU CMD_EXT2 CMD_EXT4 CMD_EXT4_WRITE CMD_FS_GENERIC CMD_MMC Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> [trini: Don't make CMD_USB_MASS_STORAGE nor CMD_DFU depend on CMD_USB] Signed-off-by: Tom Rini <trini@konsulko.com>
2016-04-21 14:05:23 +00:00
help
Support for the FAT fs
fs/squashfs: add filesystem commands Add 'ls' and 'load' commands. Signed-off-by: Joao Marcos Costa <joaomarcos.costa@bootlin.com>
2020-07-30 13:33:48 +00:00
config CMD_SQUASHFS
bool "SquashFS command support"
select FS_SQUASHFS
help
Enables SquashFS filesystem commands (e.g. load, ls).
cmd: Kconfig: Add a Kconfig options for a few CMD Add the following CMD options to Kconfig: CMD_BOOTZ CMD_ASKENV CMD_GREPENV CMD_USB_MASS_STORAGE CMD_FAT CMD_MII CMD_CACHE CMD_DFU CMD_EXT2 CMD_EXT4 CMD_EXT4_WRITE CMD_FS_GENERIC CMD_MMC Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> [trini: Don't make CMD_USB_MASS_STORAGE nor CMD_DFU depend on CMD_USB] Signed-off-by: Tom Rini <trini@konsulko.com>
2016-04-21 14:05:23 +00:00
config CMD_FS_GENERIC
bool "filesystem commands"
help
Enables filesystem commands (e.g. load, ls) that work for multiple
fs types.
cmd: Add Kconfig option for CMD_MTDPARTS and related options CMD_MTDPARTS is something the user might or might not want to select, and might depends on (or be selected by) other options too. This is even truer for the MTDIDS_DEFAULT and MTDPARTS_DEFAULT options that might change from one board to another, or from one user to the other, depending on what it expects and what storage devices are available. In order to ease that configuration, add those options to Kconfig. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2017-02-27 17:22:04 +00:00
add Kconfig for fsuuid command CONFIG_CMD_FS_UUID was neither whitelisted, nor was it declared in Kconfig. Now it can be enabled in .config and defconfig as expected. Signed-off-by: Josua Mayer <josua.mayer97@gmail.com>
2017-04-24 08:10:45 +00:00
config CMD_FS_UUID
bool "fsuuid command"
help
Enables fsuuid command for filesystem UUID.
Convert CONFIG_CMD_JFFS2 to Kconfig This converts the following to Kconfig: CONFIG_CMD_JFFS2 Signed-off-by: Simon Glass <sjg@chromium.org>
2017-05-17 09:25:37 +00:00
config CMD_JFFS2
bool "jffs2 command"
fs: Kconfig: Add a separate option for FS_JFFS2 Rather than using CMD_JFFS2 for both the filesystem and its command, we should have a separate option for each. This allows us to enable JFFS2 support without the command, if desired, which reduces U-Boot's size slightly. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-05-17 09:25:38 +00:00
select FS_JFFS2
Convert CONFIG_CMD_JFFS2 to Kconfig This converts the following to Kconfig: CONFIG_CMD_JFFS2 Signed-off-by: Simon Glass <sjg@chromium.org>
2017-05-17 09:25:37 +00:00
help
Enables commands to support the JFFS2 (Journalling Flash File System
version 2) filesystem. This enables fsload, ls and fsinfo which
provide the ability to load files, list directories and obtain
filesystem information.
cmd: Add Kconfig option for CMD_MTDPARTS and related options CMD_MTDPARTS is something the user might or might not want to select, and might depends on (or be selected by) other options too. This is even truer for the MTDIDS_DEFAULT and MTDPARTS_DEFAULT options that might change from one board to another, or from one user to the other, depending on what it expects and what storage devices are available. In order to ease that configuration, add those options to Kconfig. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2017-02-27 17:22:04 +00:00
config CMD_MTDPARTS
bool "MTD partition support"
cmd: make MTD commands depend on MTD Defconfigs have been fixed, now we can add proper dependencies in Kconfig. SPI FLASH is still not dependent on MTD (deeper rework needed). Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-10-25 17:39:30 +00:00
depends on MTD
cmd: Add Kconfig option for CMD_MTDPARTS and related options CMD_MTDPARTS is something the user might or might not want to select, and might depends on (or be selected by) other options too. This is even truer for the MTDIDS_DEFAULT and MTDPARTS_DEFAULT options that might change from one board to another, or from one user to the other, depending on what it expects and what storage devices are available. In order to ease that configuration, add those options to Kconfig. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2017-02-27 17:22:04 +00:00
help
cmd: mtdparts: describe as legacy The 'mtdparts' command is not needed anymore. While the environment variable is still valid (and useful, along with the 'mtdids' one), the command has been replaced by 'mtd' which is much more close to the MTD stack and do not add its own specific glue. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-09-29 10:58:30 +00:00
MTD partitioning tool support.
It is strongly encouraged to avoid using this command
anymore along with 'sf', 'nand', 'onenand'. One can still
declare the partitions in the mtdparts environment variable
but better use the MTD stack and the 'mtd' command instead.
cmd: Add Kconfig option for CMD_MTDPARTS and related options CMD_MTDPARTS is something the user might or might not want to select, and might depends on (or be selected by) other options too. This is even truer for the MTDIDS_DEFAULT and MTDPARTS_DEFAULT options that might change from one board to another, or from one user to the other, depending on what it expects and what storage devices are available. In order to ease that configuration, add those options to Kconfig. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2017-02-27 17:22:04 +00:00
Convert CONFIG_CMD_MTDPARTS_SPREAD to Kconfig This converts the following to Kconfig: CONFIG_CMD_MTDPARTS_SPREAD Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> [trini: Make this a bool not a string] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-08-04 22:34:30 +00:00
config CMD_MTDPARTS_SPREAD
bool "Padd partition size to take account of bad blocks"
depends on CMD_MTDPARTS
help
This enables the 'spread' sub-command of the mtdparts command.
This command will modify the existing mtdparts variable by increasing
the size of the partitions such that 1) each partition's net size is
at least as large as the size specified in the mtdparts variable and
2) each partition starts on a good block.
cmd: mtdparts: Fix build with option ..._SHOW_NET_SIZES That option is currently not used by any defconfig and could not be set anymore since it became mandatory to used Kconfig when introducing new options with U-Boot v2016.11 or commit eed921d92348 ("Kconfig: Add a whitelist of ad-hoc CONFIG options") and commit 371244cb19f9 ("Makefile: Give a build error if ad-hoc CONFIG options are added"). It was also not considered when fixing build warnings in commit 39ac34473f3c ("cmd_mtdparts: use 64 bits for flash size, partition size & offset") and could probably not be compiled anyway after commit dfe64e2c8973 ("mtd: resync with Linux-3.7.1"), which renamed some members of struct mtd_info … so it was probably broken since then, which was U-Boot v2013.07-rc1. However it still seems to work, see example output below: U-Boot 2019.10-00035-g06a9b259ca-dirty (Oct 30 2019 - 14:03:44 +0100) CPU: SAMA5D27 1G bits DDR2 SDRAM Crystal frequency: 24 MHz CPU clock : 492 MHz Master clock : 164 MHz Model: *** DRAM: 128 MiB NAND: 256 MiB Loading Environment from NAND... OK In: serial@f8020000 Out: serial@f8020000 Err: serial@f8020000 Net: eth0: ethernet@f8008000 Hit keys 'tt' to stop autoboot (3 seconds). U-Boot> mtdparts device nand0 <atmel_nand>, # parts = 8 #: name size net size offset mask_flags 0: bootstrap 0x00040000 0x00040000 0x00000000 1 1: uboot 0x000c0000 0x000c0000 0x00040000 1 2: env1 0x00040000 0x00040000 0x00100000 0 3: env2 0x00040000 0x00040000 0x00140000 0 4: fpga_led 0x00040000 0x00040000 0x00180000 1 5: reserved 0x00040000 0x00040000 0x001c0000 1 6: rootfs_rec 0x03200000 0x03200000 0x00200000 1 7: filesystem 0x0cc00000 0x0cb80000 (!) 0x03400000 0 active partition: nand0,0 - (bootstrap) 0x00040000 @ 0x00000000 defaults: mtdids : nand0=atmel_nand mtdparts: mtdparts=atmel_nand:256k(bootstrap)ro,768k(uboot)ro,256k(env1),256k(env2),256k(fpga_led)ro,256k(reserved)ro,50M(rootfs_rec)ro,-(filesystem) Signed-off-by: Alexander Dahl <ada@thorsis.com>
2019-10-30 15:53:55 +00:00
config CMD_MTDPARTS_SHOW_NET_SIZES
bool "Show net size (w/o bad blocks) of partitions"
depends on CMD_MTDPARTS
help
Adds two columns to the printed partition table showing the
effective usable size of a partition, if bad blocks are taken
into account.
cmd: mtdparts: Kconfig: join mtdparts command entry with its options Move the Kconfig entry of the option right after the entry of the mtdparts command. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-10-03 17:50:25 +00:00
config MTDIDS_DEFAULT
string "Default MTD IDs"
cmd: make MTD commands depend on MTD Defconfigs have been fixed, now we can add proper dependencies in Kconfig. SPI FLASH is still not dependent on MTD (deeper rework needed). Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-10-25 17:39:30 +00:00
depends on MTD || SPI_FLASH
cmd: mtdparts: Kconfig: join mtdparts command entry with its options Move the Kconfig entry of the option right after the entry of the mtdparts command. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-10-03 17:50:25 +00:00
help
Defines a default MTD IDs list for use with MTD partitions in the
Linux MTD command line partitions format.
config MTDPARTS_DEFAULT
string "Default MTD partition scheme"
cmd: make MTD commands depend on MTD Defconfigs have been fixed, now we can add proper dependencies in Kconfig. SPI FLASH is still not dependent on MTD (deeper rework needed). Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-10-25 17:39:30 +00:00
depends on MTD || SPI_FLASH
cmd: mtdparts: Kconfig: join mtdparts command entry with its options Move the Kconfig entry of the option right after the entry of the mtdparts command. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-10-03 17:50:25 +00:00
help
Defines a default MTD partitioning scheme in the Linux MTD command
line partitions format
Convert CONFIG_CMD_REISER to Kconfig This converts the following to Kconfig: CONFIG_CMD_REISER Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-08-04 22:34:41 +00:00
config CMD_REISER
bool "reiser - Access to reiserfs filesystems"
help
This provides two commands which operate on a resierfs filesystem,
commonly used some years ago:
reiserls - list files
reiserload - load a file
Convert CONFIG_CMD_YAFFS2 to Kconfig This converts the following to Kconfig: CONFIG_CMD_YAFFS2 Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-08-04 22:34:58 +00:00
config CMD_YAFFS2
bool "yaffs2 - Access of YAFFS2 filesystem"
depends on YAFFS2
default y
help
This provides commands for accessing a YAFFS2 filesystem. Yet
Another Flash Filesystem 2 is a filesystem designed specifically
for NAND flash. It incorporates bad-block management and ensures
that device writes are sequential regardless of filesystem
activity.
Convert CONFIG_CMD_ZFS to Kconfig This converts the following to Kconfig: CONFIG_CMD_ZFS Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-08-04 22:35:04 +00:00
config CMD_ZFS
bool "zfs - Access of ZFS filesystem"
help
This provides commands to accessing a ZFS filesystem, commonly used
on Solaris systems. Two sub-commands are provided:
zfsls - list files in a directory
zfsload - load a file
See doc/README.zfs for more details.
cmd: Kconfig: Add a Kconfig options for a few CMD Add the following CMD options to Kconfig: CMD_BOOTZ CMD_ASKENV CMD_GREPENV CMD_USB_MASS_STORAGE CMD_FAT CMD_MII CMD_CACHE CMD_DFU CMD_EXT2 CMD_EXT4 CMD_EXT4_WRITE CMD_FS_GENERIC CMD_MMC Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> [trini: Don't make CMD_USB_MASS_STORAGE nor CMD_DFU depend on CMD_USB] Signed-off-by: Tom Rini <trini@konsulko.com>
2016-04-21 14:05:23 +00:00
endmenu
Convert CONFIG_CMD_BEDBUG to Kconfig This converts the following to Kconfig: CONFIG_CMD_BEDBUG Signed-off-by: Simon Glass <sjg@chromium.org>
2017-04-27 04:27:52 +00:00
menu "Debug commands"
config CMD_BEDBUG
bool "bedbug"
help
The bedbug (emBEDded deBUGger) command provides debugging features
for some PowerPC processors. For details please see the
Kconfig: fix typos in CMD_BEDBUG description Fix documentation bug reported by 'make refcheckdocs'. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-02-25 20:44:05 +00:00
documentation in doc/README.bedbug.
Convert CONFIG_CMD_BEDBUG to Kconfig This converts the following to Kconfig: CONFIG_CMD_BEDBUG Signed-off-by: Simon Glass <sjg@chromium.org>
2017-04-27 04:27:52 +00:00
Convert CONFIG_CMD_DIAG to Kconfig This converts the following to Kconfig: CONFIG_CMD_DIAG Signed-off-by: Simon Glass <sjg@chromium.org> [trini: imply CMD_DIAG on some keymile configs] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-04-27 04:28:08 +00:00
config CMD_DIAG
bool "diag - Board diagnostics"
help
This command provides access to board diagnostic tests. These are
called Power-on Self Tests (POST). The command allows listing of
available tests and running either all the tests, or specific tests
identified by name.
Convert CONFIG_CMD_IRQ to Kconfig This converts the following to Kconfig: CONFIG_CMD_IRQ Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-05-17 09:25:39 +00:00
config CMD_IRQ
bool "irq - Show information about interrupts"
cmd: irq: disable CMD_IRQ for riscv arch For RISC-V arch, no need for CMD_IRQ so disable the same. Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Rick Chen <rick@andestech.com> Reviewed-by: Bin Meng <bin.meng@windriver.com>
2020-08-24 15:08:55 +00:00
depends on !ARM && !MIPS && !RISCV && !SH
Convert CONFIG_CMD_IRQ to Kconfig This converts the following to Kconfig: CONFIG_CMD_IRQ Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-05-17 09:25:39 +00:00
help
This enables two commands:
interrupts - enable or disable interrupts
irqinfo - print device-specific interrupt information
Convert CONFIG_CMD_KGDB to Kconfig This converts the following to Kconfig: CONFIG_CMD_KGDB Signed-off-by: Simon Glass <sjg@chromium.org>
2017-05-17 09:25:40 +00:00
config CMD_KGDB
bool "kgdb - Allow debugging of U-Boot with gdb"
cmd: kgdb: Enable kgdb only for PPC Only PPC supports this option that's why there should be proper dependency setup via Kconfig. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-10-04 12:26:13 +00:00
depends on PPC
Convert CONFIG_CMD_KGDB to Kconfig This converts the following to Kconfig: CONFIG_CMD_KGDB Signed-off-by: Simon Glass <sjg@chromium.org>
2017-05-17 09:25:40 +00:00
help
This enables a 'kgdb' command which allows gdb to connect to U-Boot
over a serial link for debugging purposes. This allows
single-stepping, inspecting variables, etc. This is supported only
on PowerPC at present.
log: Add a 'log level' command Add a command for adjusting the log level. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-12-04 20:48:26 +00:00
config CMD_LOG
bool "log - Generation, control and access to logging"
cmd: CONFIG_CMD_LOG select CONFIG_LOG CONFIG_CMD_LOG without CONFIG_LOG leads to a build error: ‘gd_t {aka volatile struct global_data}’ has no member named ‘default_log_level’ So CMD_LOG should select LOG. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-04-19 20:02:46 +00:00
select LOG
cmd: log: Add commands to manipulate filters This adds several commands to add, list, and remove log filters. Due to the complexity of adding a filter, `log filter-list` uses options instead of positional arguments. These commands have been added as subcommands to log by using a dash to join the subcommand and subsubcommand. This is stylistic, and they could be converted to proper subsubcommands if it is wished. Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-27 23:55:38 +00:00
select GETOPT
log: Add a 'log level' command Add a command for adjusting the log level. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-12-04 20:48:26 +00:00
help
This provides access to logging features. It allows the output of
log data to be controlled to a limited extent (setting up the default
log: Add a test command Add a command which exercises the logging system. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-12-04 20:48:27 +00:00
maximum log level for emitting of records). It also provides access
to a command used for testing the log system.
log: Add a 'log level' command Add a command for adjusting the log level. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-12-04 20:48:26 +00:00
Convert CONFIG_CMD_TRACE to Kconfig This converts the following to Kconfig: CONFIG_CMD_TRACE Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-08-04 22:34:59 +00:00
config CMD_TRACE
bool "trace - Support tracing of function calls and timing"
help
Enables a command to control using of function tracing within
U-Boot. This allows recording of call traces including timing
information. The command can write data to memory for exporting
Convert CONFIG_TRACE to Kconfig This converts the following to Kconfig: CONFIG_TRACE Signed-off-by: Simon Glass <sjg@chromium.org>
2019-04-08 19:20:51 +00:00
for analysis (e.g. using bootchart). See doc/README.trace for full
Convert CONFIG_CMD_TRACE to Kconfig This converts the following to Kconfig: CONFIG_CMD_TRACE Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-08-04 22:34:59 +00:00
details.
cmd: avb2.0: avb command for performing verification Enable a "avb" command to execute Android Verified Boot 2.0 operations. It includes such subcommands: avb init - initialize avb2 subsystem avb read_rb - read rollback index avb write_rb - write rollback index avb is_unlocked - check device lock state avb get_uuid - read and print uuid of a partition avb read_part - read data from partition avb read_part_hex - read data from partition and output to stdout avb write_part - write data to partition avb verify - run full verification chain Signed-off-by: Igor Opaniuk <igor.opaniuk@linaro.org>
2018-06-03 18:56:39 +00:00
config CMD_AVB
bool "avb - Android Verified Boot 2.0 operations"
avb2.0: add proper dependencies 1. Since libavb library alone is highly portable, introduce dedicated Kconfig symbol for AVB bootloader-dependent operations, so it's possible to build libavb separately. AVB bootloader-dependent operations include: * Helpers to process strings in order to build OS bootargs. * Helpers to access MMC, similar to drivers/fastboot/fb_mmc.c. * Helpers to alloc/init/free avb ops. 2. Add CONFIG_FASTBOOT dependency, as fastboot buffer is re-used in partition verification operations. Reported-by: Eugeniu Rosca <rosca.eugeniu@gmail.com> Signed-off-by: Igor Opaniuk <igor.opaniuk@linaro.org> Reviewed-by: Eugeniu Rosca <rosca.eugeniu@gmail.com> Tested-by: Eugeniu Rosca <rosca.eugeniu@gmail.com>
2018-07-17 11:33:25 +00:00
depends on AVB_VERIFY
cmd: avb2.0: avb command for performing verification Enable a "avb" command to execute Android Verified Boot 2.0 operations. It includes such subcommands: avb init - initialize avb2 subsystem avb read_rb - read rollback index avb write_rb - write rollback index avb is_unlocked - check device lock state avb get_uuid - read and print uuid of a partition avb read_part - read data from partition avb read_part_hex - read data from partition and output to stdout avb write_part - write data to partition avb verify - run full verification chain Signed-off-by: Igor Opaniuk <igor.opaniuk@linaro.org>
2018-06-03 18:56:39 +00:00
default n
help
Enables a "avb" command to perform verification of partitions using
Android Verified Boot 2.0 functionality. It includes such subcommands:
avb init - initialize avb2 subsystem
avb read_rb - read rollback index
avb write_rb - write rollback index
avb is_unlocked - check device lock state
avb get_uuid - read and print uuid of a partition
avb read_part - read data from partition
avb read_part_hex - read data from partition and output to stdout
avb write_part - write data to partition
avb verify - run full verification chain
Convert CONFIG_CMD_BEDBUG to Kconfig This converts the following to Kconfig: CONFIG_CMD_BEDBUG Signed-off-by: Simon Glass <sjg@chromium.org>
2017-04-27 04:27:52 +00:00
endmenu
kconfig: introduce kconfig for UBI move the UBI config options into Kconfig. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Andrew F. Davis <afd@ti.com> Reviewed by: Evgeni Dobrev <evgeni at studio-punkt.com>
2016-09-21 05:58:19 +00:00
config CMD_UBI
tristate "Enable UBI - Unsorted block images commands"
select MTD_UBI
help
UBI is a software layer above MTD layer which admits use of LVM-like
logical volumes on top of MTD devices, hides some complexities of
flash chips like wear and bad blocks and provides some other useful
capabilities. Please, consult the MTD web site for more details
(www.linux-mtd.infradead.org). Activate this option if you want
to use U-Boot UBI commands.
cmd: ubi: clean the partition handling UBI should not mess with MTD partitions, now that the partitions are handled in a clean way, clean the ubi command and avoid using this uneeded extra-glue to reference the devices. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-09-29 10:58:29 +00:00
It is also strongly encouraged to also enable CONFIG_MTD to get full
partition support.
kconfig: introduce kconfig for UBI move the UBI config options into Kconfig. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Andrew F. Davis <afd@ti.com> Reviewed by: Evgeni Dobrev <evgeni at studio-punkt.com>
2016-09-21 05:58:19 +00:00
cmd: ubi: add a command to rename volume This commit adds the command ubi rename to rename an ubi volume. The format of the command is: ubi rename <oldname> <newname>. To enable this command, the option CMD_UBI_RENAME must be selected. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-03-23 18:20:47 +00:00
config CMD_UBI_RENAME
bool "Enable rename"
depends on CMD_UBI
default n
help
Enable a "ubi" command to rename ubi volume:
ubi rename <oldname> <newname>
cmd: Expose a Kconfig option to enable UBIFS commands Create a new Kconfig entry to allow CMD_UBIFS selection from Kconfig and add an hidden LZO option that can be selected by CMD_UBIFS. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Jagan Teki <jagan@openedev.com>
2017-02-27 17:22:06 +00:00
config CMD_UBIFS
tristate "Enable UBIFS - Unsorted block images filesystem commands"
cmd: ubifs: Add a dependency on CMD_UBI CMD_UBIFS can't compile without CMD_UBI enabled. Make sure we can't end up in that case. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Heiko Schocher <hs@denx.de>
2017-03-03 13:53:22 +00:00
depends on CMD_UBI
Kconfig: Sort bool, default, select and imply options Fix Kconfig bool, default, select and imply options to be alphabetically sorted. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-07-23 13:55:13 +00:00
default y if CMD_UBI
cmd: Kconfig: Fix CMD_UBIFS dependencies Remove the ARCH_SUNXI and RBTREE dependencies. CMD_UBIFS already gets RBTREE from CMD_UBI (from MTD_UBI), and should the first become independant from the latter, there would likely be a dependency on MTD_UBI anyway. Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Cc: Jagan Teki <jagan@openedev.com> Signed-off-by: Karl Beldan <karl.beldan-ext@sagemcom.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-07-12 16:11:47 +00:00
select LZO
cmd: Expose a Kconfig option to enable UBIFS commands Create a new Kconfig entry to allow CMD_UBIFS selection from Kconfig and add an hidden LZO option that can be selected by CMD_UBIFS. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Jagan Teki <jagan@openedev.com>
2017-02-27 17:22:06 +00:00
help
UBIFS is a file system for flash devices which works on top of UBI.
Move all command code into its own directory There are a lot of unrelated files in common, including all of the commands. Moving them into their own directory makes them easier to find and is more logical. Some commands include non-command code, such as cmd_scsi.c. This should be sorted out at some point so that the function can be enabled with or without the associated command. Unfortunately, with m68k I get this error: m68k: + M5329AFEE +arch/m68k/cpu/mcf532x/start.o: In function `_start': +arch/m68k/cpu/mcf532x/start.S:159:(.text+0x452): relocation truncated to fit: R_68K_PC16 against symbol `board_init_f' defined in .text.board_init_f section in common/built-in.o I hope someone can shed some light on what this means. I hope it isn't depending on the position of code in the image. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de> Acked-by: Stefan Roese <sr@denx.de> Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
2016-01-18 03:53:51 +00:00
endmenu
Reference in a new issue Copy permalink