u-boot/arch/arm/mach-uniphier/sg-regs.h

104 lines
3.4 KiB
C
Raw Normal View History

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* UniPhier SG (SoC Glue) block registers
*
* Copyright (C) 2011-2015 Copyright (C) 2011-2015 Panasonic Corporation
* Copyright (C) 2016-2017 Socionext Inc.
* Author: Masahiro Yamada <yamada.masahiro@socionext.com>
*/
#ifndef UNIPHIER_SG_REGS_H
#define UNIPHIER_SG_REGS_H
#include <linux/bitops.h>
#ifndef __ASSEMBLY__
#include <linux/compiler.h>
#ifdef CONFIG_ARCH_UNIPHIER_V8_MULTI
extern void __iomem *sg_base;
#else
#define sg_base ((void __iomem *)SG_BASE)
#endif
#endif /* __ASSEMBLY__ */
/* Base Address */
#define SG_BASE 0x5f800000
/* Revision */
#define SG_REVISION 0x0000
#define SG_REVISION_TYPE_MASK GENMASK(23, 16)
#define SG_REVISION_MODEL_MASK GENMASK(10, 8)
#define SG_REVISION_REV_MASK GENMASK(4, 0)
/* Memory Configuration */
#define SG_MEMCONF 0x0400
#define SG_MEMCONF_CH0_SZ_MASK ((0x1 << 10) | (0x03 << 0))
#define SG_MEMCONF_CH0_SZ_64M ((0x0 << 10) | (0x01 << 0))
#define SG_MEMCONF_CH0_SZ_128M ((0x0 << 10) | (0x02 << 0))
#define SG_MEMCONF_CH0_SZ_256M ((0x0 << 10) | (0x03 << 0))
#define SG_MEMCONF_CH0_SZ_512M ((0x1 << 10) | (0x00 << 0))
#define SG_MEMCONF_CH0_SZ_1G ((0x1 << 10) | (0x01 << 0))
#define SG_MEMCONF_CH0_NUM_MASK (0x1 << 8)
#define SG_MEMCONF_CH0_NUM_1 (0x1 << 8)
#define SG_MEMCONF_CH0_NUM_2 (0x0 << 8)
#define SG_MEMCONF_CH1_SZ_MASK ((0x1 << 11) | (0x03 << 2))
#define SG_MEMCONF_CH1_SZ_64M ((0x0 << 11) | (0x01 << 2))
#define SG_MEMCONF_CH1_SZ_128M ((0x0 << 11) | (0x02 << 2))
#define SG_MEMCONF_CH1_SZ_256M ((0x0 << 11) | (0x03 << 2))
#define SG_MEMCONF_CH1_SZ_512M ((0x1 << 11) | (0x00 << 2))
#define SG_MEMCONF_CH1_SZ_1G ((0x1 << 11) | (0x01 << 2))
#define SG_MEMCONF_CH1_NUM_MASK (0x1 << 9)
#define SG_MEMCONF_CH1_NUM_1 (0x1 << 9)
#define SG_MEMCONF_CH1_NUM_2 (0x0 << 9)
#define SG_MEMCONF_CH2_SZ_MASK ((0x1 << 26) | (0x03 << 16))
#define SG_MEMCONF_CH2_SZ_64M ((0x0 << 26) | (0x01 << 16))
#define SG_MEMCONF_CH2_SZ_128M ((0x0 << 26) | (0x02 << 16))
#define SG_MEMCONF_CH2_SZ_256M ((0x0 << 26) | (0x03 << 16))
#define SG_MEMCONF_CH2_SZ_512M ((0x1 << 26) | (0x00 << 16))
#define SG_MEMCONF_CH2_SZ_1G ((0x1 << 26) | (0x01 << 16))
#define SG_MEMCONF_CH2_NUM_MASK (0x1 << 24)
#define SG_MEMCONF_CH2_NUM_1 (0x1 << 24)
#define SG_MEMCONF_CH2_NUM_2 (0x0 << 24)
/* PH1-LD6b, ProXstream2, PH1-LD20 only */
#define SG_MEMCONF_CH2_DISABLE (0x1 << 21)
#define SG_MEMCONF_SPARSEMEM (0x1 << 4)
#define SG_USBPHYCTRL 0x0500
#define SG_ETPHYPSHUT 0x0554
#define SG_ETPHYCNT 0x0550
/* Pin Control */
#define SG_PINCTRL_BASE 0x1000
/* PH1-Pro4, PH1-Pro5 */
#define SG_LOADPINCTRL 0x1700
/* Input Enable */
#define SG_IECTRL 0x1d00
/* Pin Monitor */
#define SG_PINMON0 0x00100100
#define SG_PINMON2 0x00100108
#define SG_PINMON0_CLK_MODE_UPLLSRC_MASK (0x3 << 19)
#define SG_PINMON0_CLK_MODE_UPLLSRC_DEFAULT (0x0 << 19)
#define SG_PINMON0_CLK_MODE_UPLLSRC_VPLL27A (0x2 << 19)
#define SG_PINMON0_CLK_MODE_UPLLSRC_VPLL27B (0x3 << 19)
#define SG_PINMON0_CLK_MODE_AXOSEL_MASK (0x3 << 16)
#define SG_PINMON0_CLK_MODE_AXOSEL_24576KHZ (0x0 << 16)
#define SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ (0x1 << 16)
#define SG_PINMON0_CLK_MODE_AXOSEL_6144KHZ (0x2 << 16)
#define SG_PINMON0_CLK_MODE_AXOSEL_6250KHZ (0x3 << 16)
#define SG_PINMON0_CLK_MODE_AXOSEL_DEFAULT (0x0 << 16)
#define SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_U (0x1 << 16)
#define SG_PINMON0_CLK_MODE_AXOSEL_20480KHZ (0x2 << 16)
#define SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_A (0x3 << 16)
#endif /* UNIPHIER_SG_REGS_H */