u-boot/drivers/usb/common/usb_urb.c

161 lines
4.2 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0
/*
* Common code for usb urb handling, based on the musb-new code
*
* Copyright 2021 Linaro, Rui Miguel Silva <rui.silva@linaro.org>
*
*/
#include <dm/device.h>
#include <dm/device_compat.h>
#include <linux/usb/usb_urb_compat.h>
#include <time.h>
#include <usb.h>
#if CONFIG_IS_ENABLED(DM_USB)
struct usb_device *usb_dev_get_parent(struct usb_device *udev)
{
struct udevice *parent = udev->dev->parent;
/*
* When called from usb-uclass.c: usb_scan_device() udev->dev points
* to the parent udevice, not the actual udevice belonging to the
* udev as the device is not instantiated yet.
*
* If dev is an usb-bus, then we are called from usb_scan_device() for
* an usb-device plugged directly into the root port, return NULL.
*/
if (device_get_uclass_id(udev->dev) == UCLASS_USB)
return NULL;
/*
* If these 2 are not the same we are being called from
* usb_scan_device() and udev itself is the parent.
*/
if (dev_get_parent_priv(udev->dev) != udev)
return udev;
/* We are being called normally, use the parent pointer */
if (device_get_uclass_id(parent) == UCLASS_USB_HUB)
return dev_get_parent_priv(parent);
return NULL;
}
#else
struct usb_device *usb_dev_get_parent(struct usb_device *udev)
{
return udev->parent;
}
#endif
static void usb_urb_complete(struct urb *urb)
{
urb->dev->status &= ~USB_ST_NOT_PROC;
urb->dev->act_len = urb->actual_length;
if (urb->status == -EINPROGRESS)
urb->status = 0;
}
void usb_urb_fill(struct urb *urb, struct usb_host_endpoint *hep,
struct usb_device *dev, int endpoint_type,
unsigned long pipe, void *buffer, int len,
struct devrequest *setup, int interval)
{
int epnum = usb_pipeendpoint(pipe);
int is_in = usb_pipein(pipe);
u16 maxpacketsize = is_in ? dev->epmaxpacketin[epnum] :
dev->epmaxpacketout[epnum];
memset(urb, 0, sizeof(struct urb));
memset(hep, 0, sizeof(struct usb_host_endpoint));
INIT_LIST_HEAD(&hep->urb_list);
INIT_LIST_HEAD(&urb->urb_list);
urb->ep = hep;
urb->complete = usb_urb_complete;
urb->status = -EINPROGRESS;
urb->dev = dev;
urb->pipe = pipe;
urb->transfer_buffer = buffer;
urb->transfer_dma = (unsigned long)buffer;
urb->transfer_buffer_length = len;
urb->setup_packet = (unsigned char *)setup;
urb->ep->desc.wMaxPacketSize = __cpu_to_le16(maxpacketsize);
urb->ep->desc.bmAttributes = endpoint_type;
urb->ep->desc.bEndpointAddress = ((is_in ? USB_DIR_IN : USB_DIR_OUT) |
epnum);
urb->ep->desc.bInterval = interval;
}
int usb_urb_submit(struct usb_hcd *hcd, struct urb *urb)
{
const struct usb_urb_ops *ops = hcd->urb_ops;
unsigned long timeout;
int ret;
if (!ops)
return -EINVAL;
ret = ops->urb_enqueue(hcd, urb, 0);
if (ret < 0) {
printf("Failed to enqueue URB to controller\n");
return ret;
}
timeout = get_timer(0) + USB_TIMEOUT_MS(urb->pipe);
do {
if (ctrlc())
return -EIO;
ops->isr(0, hcd);
} while (urb->status == -EINPROGRESS && get_timer(0) < timeout);
if (urb->status == -EINPROGRESS)
ops->urb_dequeue(hcd, urb, -ETIME);
return urb->status;
}
int usb_urb_submit_control(struct usb_hcd *hcd, struct urb *urb,
struct usb_host_endpoint *hep,
struct usb_device *dev, unsigned long pipe,
void *buffer, int len, struct devrequest *setup,
int interval, enum usb_device_speed speed)
{
const struct usb_urb_ops *ops = hcd->urb_ops;
usb_urb_fill(urb, hep, dev, USB_ENDPOINT_XFER_CONTROL, pipe, buffer,
len, setup, 0);
/* Fix speed for non hub-attached devices */
if (!usb_dev_get_parent(dev)) {
dev->speed = speed;
if (ops->hub_control)
return ops->hub_control(hcd, dev, pipe, buffer, len,
setup);
}
return usb_urb_submit(hcd, urb);
}
int usb_urb_submit_bulk(struct usb_hcd *hcd, struct urb *urb,
struct usb_host_endpoint *hep, struct usb_device *dev,
unsigned long pipe, void *buffer, int len)
{
usb_urb_fill(urb, hep, dev, USB_ENDPOINT_XFER_BULK, pipe, buffer, len,
NULL, 0);
return usb_urb_submit(hcd, urb);
}
int usb_urb_submit_irq(struct usb_hcd *hcd, struct urb *urb,
struct usb_host_endpoint *hep, struct usb_device *dev,
unsigned long pipe, void *buffer, int len, int interval)
{
usb_urb_fill(urb, hep, dev, USB_ENDPOINT_XFER_INT, pipe, buffer, len,
NULL, interval);
return usb_urb_submit(hcd, urb);
}