u-boot/board/evb4510/flash.c

540 lines
13 KiB
C
Raw Normal View History

/*
*
* Copyright (c) 2004 Cucy Systems (http://www.cucy.com)
* Curt Brune <curt@cucy.com>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <asm/hardware.h>
#include <flash.h>
flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
typedef enum {
FLASH_DEV_U9_512KB = 0,
FLASH_DEV_U7_2MB = 1
} FLASH_DEV;
#define FLASH_DQ7 (0x80)
#define FLASH_DQ5 (0x20)
#define PROG_ADDR (0xAAA)
#define SETUP_ADDR (0xAAA)
#define ID_ADDR (0xAAA)
#define UNLOCK_ADDR1 (0xAAA)
#define UNLOCK_ADDR2 (0x555)
#define UNLOCK_CMD1 (0xAA)
#define UNLOCK_CMD2 (0x55)
#define ERASE_SUSPEND_CMD (0xB0)
#define ERASE_RESUME_CMD (0x30)
#define RESET_CMD (0xF0)
#define ID_CMD (0x90)
#define SELECT_CMD (0x90)
#define CHIPERASE_CMD (0x10)
#define BYPASS_CMD (0x20)
#define SECERASE_CMD (0x30)
#define PROG_CMD (0xa0)
#define SETUP_CMD (0x80)
#if 0
#define WRITE_UNLOCK(addr) { \
PUT__U8( addr + UNLOCK_ADDR1, UNLOCK_CMD1); \
PUT__U8( addr + UNLOCK_ADDR2, UNLOCK_CMD2); \
}
/* auto select command */
#define CMD_ID(addr) WRITE_UNLOCK(addr); { \
PUT__U8( addr + ID_ADDR, ID_CMD); \
}
#define CMD_RESET(addr) WRITE_UNLOCK(addr); { \
PUT__U8( addr + ID_ADDR, RESET_CMD); \
}
#define CMD_ERASE_SEC(base, addr) WRITE_UNLOCK(base); \
PUT__U8( base + SETUP_ADDR, SETUP_CMD); \
WRITE_UNLOCK(base); \
PUT__U8( addr, SECERASE_CMD);
#define CMD_ERASE_CHIP(base) WRITE_UNLOCK(base); \
PUT__U8( base + SETUP_ADDR, SETUP_CMD); \
WRITE_UNLOCK(base); \
PUT__U8( base + SETUP_ADDR, CHIPERASE_CMD);
/* prepare for bypass programming */
#define CMD_UNLOCK_BYPASS(addr) WRITE_UNLOCK(addr); { \
PUT__U8( addr + ID_ADDR, 0x20); \
}
/* terminate bypass programming */
#define CMD_BYPASS_RESET(addr) { \
PUT__U8(addr, 0x90); \
PUT__U8(addr, 0x00); \
}
#endif
inline static void FLASH_CMD_UNLOCK (FLASH_DEV dev, u32 base)
{
switch (dev) {
case FLASH_DEV_U7_2MB:
PUT__U8 (base + 0xAAA, 0xAA);
PUT__U8 (base + 0x555, 0x55);
break;
case FLASH_DEV_U9_512KB:
PUT__U8 (base + 0x555, 0xAA);
PUT__U8 (base + 0x2AA, 0x55);
break;
}
}
inline static void FLASH_CMD_SELECT (FLASH_DEV dev, u32 base)
{
switch (dev) {
case FLASH_DEV_U7_2MB:
FLASH_CMD_UNLOCK (dev, base);
PUT__U8 (base + 0xAAA, SELECT_CMD);
break;
case FLASH_DEV_U9_512KB:
FLASH_CMD_UNLOCK (dev, base);
PUT__U8 (base + 0x555, SELECT_CMD);
break;
}
}
inline static void FLASH_CMD_RESET (FLASH_DEV dev, u32 base)
{
switch (dev) {
case FLASH_DEV_U7_2MB:
FLASH_CMD_UNLOCK (dev, base);
PUT__U8 (base + 0xAAA, RESET_CMD);
break;
case FLASH_DEV_U9_512KB:
FLASH_CMD_UNLOCK (dev, base);
PUT__U8 (base + 0x555, RESET_CMD);
break;
}
}
inline static void FLASH_CMD_ERASE_SEC (FLASH_DEV dev, u32 base, u32 addr)
{
switch (dev) {
case FLASH_DEV_U7_2MB:
FLASH_CMD_UNLOCK (dev, base);
PUT__U8 (base + 0xAAA, SETUP_CMD);
FLASH_CMD_UNLOCK (dev, base);
PUT__U8 (addr, SECERASE_CMD);
break;
case FLASH_DEV_U9_512KB:
FLASH_CMD_UNLOCK (dev, base);
PUT__U8 (base + 0x555, SETUP_CMD);
FLASH_CMD_UNLOCK (dev, base);
PUT__U8 (addr, SECERASE_CMD);
break;
}
}
inline static void FLASH_CMD_ERASE_CHIP (FLASH_DEV dev, u32 base)
{
switch (dev) {
case FLASH_DEV_U7_2MB:
FLASH_CMD_UNLOCK (dev, base);
PUT__U8 (base + 0xAAA, SETUP_CMD);
FLASH_CMD_UNLOCK (dev, base);
PUT__U8 (base, CHIPERASE_CMD);
break;
case FLASH_DEV_U9_512KB:
FLASH_CMD_UNLOCK (dev, base);
PUT__U8 (base + 0x555, SETUP_CMD);
FLASH_CMD_UNLOCK (dev, base);
PUT__U8 (base, CHIPERASE_CMD);
break;
}
}
inline static void FLASH_CMD_UNLOCK_BYPASS (FLASH_DEV dev, u32 base)
{
switch (dev) {
case FLASH_DEV_U7_2MB:
FLASH_CMD_UNLOCK (dev, base);
PUT__U8 (base + 0xAAA, BYPASS_CMD);
break;
case FLASH_DEV_U9_512KB:
FLASH_CMD_UNLOCK (dev, base);
PUT__U8 (base + 0x555, BYPASS_CMD);
break;
}
}
inline static void FLASH_CMD_BYPASS_RESET (FLASH_DEV dev, u32 base)
{
PUT__U8 (base, SELECT_CMD);
PUT__U8 (base, 0x0);
}
/* poll for flash command completion */
static u16 _flash_poll (FLASH_DEV dev, u32 addr, u16 data, ulong timeOut)
{
u32 done = 0;
ulong t0;
u16 error = 0;
volatile u16 flashData;
data = data & 0xFF;
t0 = get_timer (0);
while (get_timer (t0) < timeOut) {
/* for( i = 0; i < POLL_LOOPS; i++) { */
/* Read the Data */
flashData = GET__U8 (addr);
/* FLASH_DQ7 = Data? */
if ((flashData & FLASH_DQ7) == (data & FLASH_DQ7)) {
done = 1;
break;
}
/* Check Timeout (FLASH_DQ5==1) */
if (flashData & FLASH_DQ5) {
/* Read the Data */
flashData = GET__U8 (addr);
/* FLASH_DQ7 = Data? */
if (!((flashData & FLASH_DQ7) == (data & FLASH_DQ7))) {
printf ("_flash_poll(): FLASH_DQ7 & flashData not equal to write value\n");
error = ERR_PROG_ERROR;
}
FLASH_CMD_RESET (dev, addr);
done = 1;
break;
}
/* spin delay */
udelay (10);
}
/* error update */
if (!done) {
printf ("_flash_poll(): Timeout\n");
error = ERR_TIMOUT;
}
/* Check the data */
if (!error) {
/* Read the Data */
flashData = GET__U8 (addr);
if (flashData != data) {
error = ERR_PROG_ERROR;
printf ("_flash_poll(): flashData(0x%04x) not equal to data(0x%04x)\n",
flashData, data);
}
}
return error;
}
/*-----------------------------------------------------------------------
*/
static int _flash_check_protection (flash_info_t * info, int s_first, int s_last)
{
int sect, prot = 0;
for (sect = s_first; sect <= s_last; sect++)
if (info->protect[sect]) {
printf (" Flash sector %d protected.\n", sect);
prot++;
}
return prot;
}
static int _detectFlash (FLASH_DEV dev, u32 base, u8 venId, u8 devId)
{
u32 baseAddr = base | CACHE_DISABLE_MASK;
u8 vendorId, deviceId;
/* printf(__FUNCTION__"(): detecting flash @ 0x%08x\n", base); */
/* Send auto select command and read manufacturer info */
FLASH_CMD_SELECT (dev, baseAddr);
vendorId = GET__U8 (baseAddr);
FLASH_CMD_RESET (dev, baseAddr);
/* Send auto select command and read device info */
FLASH_CMD_SELECT (dev, baseAddr);
if (dev == FLASH_DEV_U7_2MB) {
deviceId = GET__U8 (baseAddr + 2);
} else if (dev == FLASH_DEV_U9_512KB) {
deviceId = GET__U8 (baseAddr + 1);
} else {
return 0;
}
FLASH_CMD_RESET (dev, baseAddr);
/* printf (__FUNCTION__"(): found vendorId 0x%04x, deviceId 0x%04x\n",
vendorId, deviceId);
*/
return (vendorId == venId) && (deviceId == devId);
}
/******************************************************************************
*
* Public u-boot interface functions below
*
*****************************************************************************/
/***************************************************************************
*
* Flash initialization
*
* This board has two banks of flash, but the base addresses depend on
* how the board is jumpered.
*
* The two flash types are:
*
* AMD Am29LV160DB (2MB) sectors layout 16KB, 2x8KB, 32KB, 31x64KB
*
* AMD Am29LV040B (512KB) sectors: 8x64KB
*****************************************************************************/
unsigned long flash_init (void)
{
flash_info_t *info;
u16 i;
u32 flashtest;
s16 amd160 = -1;
u32 amd160base = 0;
#if CONFIG_SYS_MAX_FLASH_BANKS == 2
s16 amd040 = -1;
u32 amd040base = 0;
#endif
/* configure PHYS_FLASH_1 */
if (_detectFlash (FLASH_DEV_U7_2MB, PHYS_FLASH_1, 0x1, 0x49)) {
amd160 = 0;
amd160base = PHYS_FLASH_1;
#if CONFIG_SYS_MAX_FLASH_BANKS == 1
}
#else
if (_detectFlash
(FLASH_DEV_U9_512KB, PHYS_FLASH_2, 0x1, 0x4F)) {
amd040 = 1;
amd040base = PHYS_FLASH_2;
} else {
printf (__FUNCTION__
"(): Unable to detect PHYS_FLASH_2: 0x%08x\n",
PHYS_FLASH_2);
}
} else if (_detectFlash (FLASH_DEV_U9_512KB, PHYS_FLASH_1, 0x1, 0x4F)) {
amd040 = 0;
amd040base = PHYS_FLASH_1;
if (_detectFlash (FLASH_DEV_U7_2MB, PHYS_FLASH_2, 0x1, 0x49)) {
amd160 = 1;
amd160base = PHYS_FLASH_2;
} else {
printf (__FUNCTION__
"(): Unable to detect PHYS_FLASH_2: 0x%08x\n",
PHYS_FLASH_2);
}
}
#endif
else {
2004-10-17 21:12:06 +00:00
printf ("flash_init(): Unable to detect PHYS_FLASH_1: 0x%08x\n",
PHYS_FLASH_1);
}
/* Configure AMD Am29LV160DB (2MB) */
info = &flash_info[amd160];
info->flash_id = FLASH_DEV_U7_2MB;
info->sector_count = 35;
info->size = 2 * 1024 * 1024; /* 2MB */
/* 1*16K Boot Block
2*8K Parameter Block
1*32K Small Main Block */
info->start[0] = amd160base;
info->start[1] = amd160base + 0x4000;
info->start[2] = amd160base + 0x6000;
info->start[3] = amd160base + 0x8000;
for (i = 1; i < info->sector_count; i++)
info->start[3 + i] = amd160base + i * (64 * 1024);
for (i = 0; i < info->sector_count; i++) {
/* Write auto select command sequence and query sector protection */
FLASH_CMD_SELECT (info->flash_id,
info->start[i] | CACHE_DISABLE_MASK);
flashtest =
GET__U8 (((info->start[i] + 4) | CACHE_DISABLE_MASK));
FLASH_CMD_RESET (info->flash_id,
amd160base | CACHE_DISABLE_MASK);
info->protect[i] = (flashtest & 0x0001);
}
/*
* protect monitor and environment sectors in 2MB flash
*/
flash_protect (FLAG_PROTECT_SET,
amd160base, amd160base + monitor_flash_len - 1, info);
flash_protect (FLAG_PROTECT_SET,
CONFIG_ENV_ADDR, CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, info);
#if CONFIG_SYS_MAX_FLASH_BANKS == 2
/* Configure AMD Am29LV040B (512KB) */
info = &flash_info[amd040];
info->flash_id = FLASH_DEV_U9_512KB;
info->sector_count = 8;
info->size = 512 * 1024; /* 512KB, 8 x 64KB */
for (i = 0; i < info->sector_count; i++) {
info->start[i] = amd040base + i * (64 * 1024);
/* Write auto select command sequence and query sector protection */
FLASH_CMD_SELECT (info->flash_id,
info->start[i] | CACHE_DISABLE_MASK);
flashtest =
GET__U8 (((info->start[i] + 2) | CACHE_DISABLE_MASK));
FLASH_CMD_RESET (info->flash_id,
amd040base | CACHE_DISABLE_MASK);
info->protect[i] = (flashtest & 0x0001);
}
#endif
return flash_info[0].size
#if CONFIG_SYS_MAX_FLASH_BANKS == 2
+ flash_info[1].size
#endif
;
}
void flash_print_info (flash_info_t * info)
{
int i;
if (info->flash_id == FLASH_DEV_U7_2MB) {
printf ("AMD Am29LV160DB (2MB) 16KB,2x8KB,32KB,31x64KB\n");
} else if (info->flash_id == FLASH_DEV_U9_512KB) {
printf ("AMD Am29LV040B (512KB) 8x64KB\n");
} else {
printf ("Unknown flash_id ...\n");
return;
}
printf (" Size: %ld KB in %d Sectors\n",
info->size >> 10, info->sector_count);
printf (" Sector Start Addresses:");
for (i = 0; i < info->sector_count; i++) {
if ((i % 4) == 0)
printf ("\n ");
printf (" S%02d @ 0x%08lX%s", i,
info->start[i], info->protect[i] ? " !" : " ");
}
printf ("\n");
}
int flash_erase (flash_info_t * info, int s_first, int s_last)
{
u16 i, error = 0;
printf ("\n");
/* check flash protection bits */
if (_flash_check_protection (info, s_first, s_last)) {
printf (" Flash erase aborted due to protected sectors\n");
return ERR_PROTECTED;
}
if ((s_first < info->sector_count) && (s_first <= s_last)) {
for (i = s_first; i <= s_last && !error; i++) {
printf (" Erasing Sector %d @ 0x%08lx ... ", i,
info->start[i]);
/* bypass the cache to access the flash memory */
FLASH_CMD_ERASE_SEC (info->flash_id,
(info->
start[0] | CACHE_DISABLE_MASK),
(info->
start[i] | CACHE_DISABLE_MASK));
/* look for sector to become 0xFF after erase */
error = _flash_poll (info->flash_id,
info->
start[i] | CACHE_DISABLE_MASK,
0xFF, CONFIG_SYS_FLASH_ERASE_TOUT);
FLASH_CMD_RESET (info->flash_id,
(info->
start[0] | CACHE_DISABLE_MASK));
printf ("done\n");
if (error) {
break;
}
}
} else
error = ERR_INVAL;
return error;
}
int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
{
u16 error = 0, i;
u32 n;
u8 *bp, *bps;
/* Write Setup */
/* bypass the cache to access the flash memory */
FLASH_CMD_UNLOCK_BYPASS (info->flash_id,
(info->start[0] | CACHE_DISABLE_MASK));
/* Write the Data to Flash */
bp = (u8 *) (addr | CACHE_DISABLE_MASK);
bps = (u8 *) src;
for (n = 0; n < cnt && !error; n++, bp++, bps++) {
if (!(n % (cnt / 15))) {
printf (".");
}
/* write the flash command for flash memory */
*bp = 0xA0;
/* Write the data */
*bp = *bps;
/* Check if the write is done */
for (i = 0; i < 0xff; i++);
error = _flash_poll (info->flash_id, (u32) bp, *bps,
CONFIG_SYS_FLASH_WRITE_TOUT);
if (error) {
return error;
}
}
/* Reset the Flash Mode to read */
FLASH_CMD_BYPASS_RESET (info->flash_id, info->start[0]);
printf (" ");
return error;
}