2022-05-21 14:56:26 +00:00
|
|
|
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
|
|
/*
|
|
|
|
* Copyright (C) 2021-2022 Marek Vasut <marex@denx.de>
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include "imx8mp.dtsi"
|
|
|
|
|
|
|
|
/ {
|
|
|
|
model = "DH electronics i.MX8M Plus DHCOM SoM";
|
|
|
|
compatible = "dh,imx8mp-dhcom-som", "fsl,imx8mp";
|
|
|
|
|
|
|
|
aliases {
|
|
|
|
ethernet0 = &eqos;
|
|
|
|
ethernet1 = &fec;
|
|
|
|
rtc0 = &rv3032;
|
|
|
|
rtc1 = &snvs_rtc;
|
|
|
|
spi0 = &flexspi;
|
|
|
|
};
|
|
|
|
|
|
|
|
memory@40000000 {
|
|
|
|
device_type = "memory";
|
|
|
|
/* Memory size 512 MiB..8 GiB will be filled by U-Boot */
|
|
|
|
reg = <0x0 0x40000000 0 0x08000000>;
|
|
|
|
};
|
|
|
|
|
|
|
|
reg_eth_vio: regulator-eth-vio {
|
|
|
|
compatible = "regulator-fixed";
|
|
|
|
gpio = <&gpio2 10 GPIO_ACTIVE_LOW>;
|
|
|
|
pinctrl-0 = <&pinctrl_enet_vio>;
|
|
|
|
pinctrl-names = "default";
|
|
|
|
regulator-always-on;
|
|
|
|
regulator-boot-on;
|
|
|
|
regulator-min-microvolt = <3300000>;
|
|
|
|
regulator-max-microvolt = <3300000>;
|
|
|
|
regulator-name = "eth_vio";
|
|
|
|
vin-supply = <&buck4>;
|
|
|
|
};
|
|
|
|
|
|
|
|
reg_usdhc2_vmmc: regulator-usdhc2-vmmc {
|
|
|
|
compatible = "regulator-fixed";
|
|
|
|
enable-active-high;
|
|
|
|
gpio = <&gpio2 19 0>; /* SD2_RESET */
|
|
|
|
off-on-delay-us = <12000>;
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&pinctrl_usdhc2_vmmc>;
|
|
|
|
regulator-max-microvolt = <3300000>;
|
|
|
|
regulator-min-microvolt = <3300000>;
|
|
|
|
regulator-name = "VDD_3V3_SD";
|
|
|
|
startup-delay-us = <100>;
|
|
|
|
vin-supply = <&buck4>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
&A53_0 {
|
|
|
|
cpu-supply = <&buck2>;
|
|
|
|
};
|
|
|
|
|
|
|
|
&A53_1 {
|
|
|
|
cpu-supply = <&buck2>;
|
|
|
|
};
|
|
|
|
|
|
|
|
&A53_2 {
|
|
|
|
cpu-supply = <&buck2>;
|
|
|
|
};
|
|
|
|
|
|
|
|
&A53_3 {
|
|
|
|
cpu-supply = <&buck2>;
|
|
|
|
};
|
|
|
|
|
|
|
|
&ecspi1 {
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&pinctrl_ecspi1>;
|
2022-08-12 20:41:54 +00:00
|
|
|
cs-gpios = <&gpio5 17 GPIO_ACTIVE_LOW>;
|
2022-05-21 14:56:26 +00:00
|
|
|
status = "disabled";
|
|
|
|
};
|
|
|
|
|
|
|
|
&ecspi2 {
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&pinctrl_ecspi2>;
|
|
|
|
cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
|
|
|
|
status = "disabled";
|
|
|
|
};
|
|
|
|
|
|
|
|
&eqos { /* First ethernet */
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&pinctrl_eqos>;
|
|
|
|
phy-handle = <ðphy0g>;
|
|
|
|
phy-mode = "rgmii-id";
|
|
|
|
status = "okay";
|
|
|
|
|
|
|
|
mdio {
|
|
|
|
compatible = "snps,dwmac-mdio";
|
|
|
|
#address-cells = <1>;
|
|
|
|
#size-cells = <0>;
|
|
|
|
|
|
|
|
/* Up to one of these two PHYs may be populated. */
|
|
|
|
ethphy0f: ethernet-phy@1 { /* SMSC LAN8740Ai */
|
|
|
|
compatible = "ethernet-phy-id0007.c110",
|
|
|
|
"ethernet-phy-ieee802.3-c22";
|
|
|
|
interrupt-parent = <&gpio3>;
|
|
|
|
interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
|
|
|
|
pinctrl-0 = <&pinctrl_ethphy0>;
|
|
|
|
pinctrl-names = "default";
|
|
|
|
reg = <1>;
|
|
|
|
reset-assert-us = <1000>;
|
|
|
|
reset-deassert-us = <1000>;
|
|
|
|
reset-gpios = <&gpio3 20 GPIO_ACTIVE_LOW>;
|
|
|
|
/* Non-default PHY population option. */
|
|
|
|
status = "disabled";
|
|
|
|
};
|
|
|
|
|
|
|
|
ethphy0g: ethernet-phy@5 { /* Micrel KSZ9131RNXI */
|
|
|
|
compatible = "ethernet-phy-id0022.1642",
|
|
|
|
"ethernet-phy-ieee802.3-c22";
|
|
|
|
interrupt-parent = <&gpio3>;
|
|
|
|
interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
|
|
|
|
micrel,led-mode = <0>;
|
|
|
|
pinctrl-0 = <&pinctrl_ethphy0>;
|
|
|
|
pinctrl-names = "default";
|
|
|
|
reg = <5>;
|
|
|
|
reset-assert-us = <1000>;
|
|
|
|
reset-deassert-us = <1000>;
|
|
|
|
reset-gpios = <&gpio3 20 GPIO_ACTIVE_LOW>;
|
|
|
|
/* Default PHY population option. */
|
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
&fec { /* Second ethernet */
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&pinctrl_fec>;
|
|
|
|
phy-handle = <ðphy1f>;
|
|
|
|
phy-mode = "rgmii";
|
|
|
|
fsl,magic-packet;
|
|
|
|
status = "okay";
|
|
|
|
|
|
|
|
mdio {
|
|
|
|
#address-cells = <1>;
|
|
|
|
#size-cells = <0>;
|
|
|
|
|
|
|
|
/* Up to one PHY may be populated. */
|
|
|
|
ethphy1f: ethernet-phy@1 { /* SMSC LAN8740Ai */
|
|
|
|
compatible = "ethernet-phy-id0007.c110",
|
|
|
|
"ethernet-phy-ieee802.3-c22";
|
|
|
|
interrupt-parent = <&gpio4>;
|
|
|
|
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
|
|
|
|
pinctrl-0 = <&pinctrl_ethphy1>;
|
|
|
|
pinctrl-names = "default";
|
|
|
|
reg = <1>;
|
|
|
|
reset-assert-us = <1000>;
|
|
|
|
reset-deassert-us = <1000>;
|
|
|
|
reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
|
|
|
|
/* Non-default PHY population option. */
|
|
|
|
status = "disabled";
|
|
|
|
};
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
&flexcan1 {
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&pinctrl_flexcan1>;
|
|
|
|
status = "disabled";
|
|
|
|
};
|
|
|
|
|
|
|
|
&flexcan2 {
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&pinctrl_flexcan2>;
|
|
|
|
status = "disabled";
|
|
|
|
};
|
|
|
|
|
|
|
|
&flexspi {
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&pinctrl_flexspi>;
|
|
|
|
status = "okay";
|
|
|
|
|
|
|
|
flash@0 { /* W25Q128JWPIM */
|
|
|
|
compatible = "jedec,spi-nor";
|
|
|
|
reg = <0>;
|
|
|
|
spi-max-frequency = <80000000>;
|
|
|
|
spi-tx-bus-width = <4>;
|
|
|
|
spi-rx-bus-width = <4>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
&gpio1 {
|
|
|
|
gpio-line-names =
|
|
|
|
"DHCOM-G", "", "", "", "", "DHCOM-I", "DHCOM-J", "DHCOM-L",
|
|
|
|
"DHCOM-B", "DHCOM-A", "", "DHCOM-H", "", "", "", "",
|
|
|
|
"", "", "", "", "", "", "", "",
|
|
|
|
"", "", "", "", "", "", "", "";
|
|
|
|
};
|
|
|
|
|
|
|
|
&gpio2 {
|
|
|
|
gpio-line-names =
|
|
|
|
"", "", "", "", "", "", "", "",
|
|
|
|
"", "", "", "DHCOM-K", "", "", "", "",
|
|
|
|
"", "", "", "", "DHCOM-INT", "", "", "",
|
|
|
|
"", "", "", "", "", "", "", "";
|
|
|
|
};
|
|
|
|
|
|
|
|
&gpio3 {
|
|
|
|
gpio-line-names =
|
|
|
|
"", "", "", "", "", "", "", "",
|
|
|
|
"", "", "", "", "", "", "SOM-HW0", "",
|
|
|
|
"", "", "", "", "", "", "SOM-MEM0", "SOM-MEM1",
|
|
|
|
"SOM-MEM2", "SOM-HW2", "", "", "", "", "", "";
|
|
|
|
};
|
|
|
|
|
|
|
|
&gpio4 {
|
|
|
|
gpio-line-names =
|
|
|
|
"", "", "", "", "", "", "", "",
|
|
|
|
"", "", "", "", "", "", "", "",
|
|
|
|
"", "", "", "SOM-HW1", "", "", "", "",
|
|
|
|
"", "", "", "DHCOM-D", "", "", "", "";
|
|
|
|
};
|
|
|
|
|
|
|
|
&gpio5 {
|
|
|
|
gpio-line-names =
|
|
|
|
"", "", "DHCOM-C", "", "", "", "", "",
|
|
|
|
"", "", "", "", "", "", "", "",
|
|
|
|
"", "", "", "", "", "", "DHCOM-E", "DHCOM-F",
|
|
|
|
"", "", "", "", "", "", "", "";
|
|
|
|
};
|
|
|
|
|
|
|
|
&i2c3 {
|
|
|
|
/*
|
|
|
|
* iMX8MP 1P33A Errata ERR007805
|
|
|
|
* I2C is limited to 384 kHz due to SoC bug.
|
|
|
|
*/
|
|
|
|
clock-frequency = <100000>;
|
|
|
|
pinctrl-names = "default", "gpio";
|
|
|
|
pinctrl-0 = <&pinctrl_i2c3>;
|
|
|
|
pinctrl-1 = <&pinctrl_i2c3_gpio>;
|
|
|
|
scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
|
|
|
|
sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
|
|
|
|
status = "okay";
|
|
|
|
|
|
|
|
pmic: pmic@25 {
|
|
|
|
compatible = "nxp,pca9450c";
|
|
|
|
reg = <0x25>;
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&pinctrl_pmic>;
|
|
|
|
interrupt-parent = <&gpio1>;
|
|
|
|
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
|
|
|
|
sd-vsel-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* i.MX 8M Plus Data Sheet for Consumer Products
|
|
|
|
* 3.1.4 Operating ranges
|
|
|
|
* MIMX8ML8CVNKZAB
|
|
|
|
*/
|
|
|
|
regulators {
|
|
|
|
buck1: BUCK1 { /* VDD_SOC (dual-phase with BUCK3) */
|
|
|
|
regulator-compatible = "BUCK1";
|
|
|
|
regulator-min-microvolt = <850000>;
|
|
|
|
regulator-max-microvolt = <1000000>;
|
|
|
|
regulator-ramp-delay = <3125>;
|
|
|
|
regulator-always-on;
|
|
|
|
regulator-boot-on;
|
|
|
|
};
|
|
|
|
|
|
|
|
buck2: BUCK2 { /* VDD_ARM */
|
|
|
|
regulator-compatible = "BUCK2";
|
|
|
|
regulator-min-microvolt = <850000>;
|
|
|
|
regulator-max-microvolt = <1000000>;
|
|
|
|
regulator-ramp-delay = <3125>;
|
|
|
|
regulator-always-on;
|
|
|
|
regulator-boot-on;
|
|
|
|
};
|
|
|
|
|
|
|
|
buck4: BUCK4 { /* VDD_3V3 */
|
|
|
|
regulator-compatible = "BUCK4";
|
|
|
|
regulator-min-microvolt = <3300000>;
|
|
|
|
regulator-max-microvolt = <3300000>;
|
|
|
|
regulator-always-on;
|
|
|
|
regulator-boot-on;
|
|
|
|
};
|
|
|
|
|
|
|
|
buck5: BUCK5 { /* VDD_1V8 */
|
|
|
|
regulator-compatible = "BUCK5";
|
|
|
|
regulator-min-microvolt = <1800000>;
|
|
|
|
regulator-max-microvolt = <1800000>;
|
|
|
|
regulator-always-on;
|
|
|
|
regulator-boot-on;
|
|
|
|
};
|
|
|
|
|
|
|
|
buck6: BUCK6 { /* NVCC_DRAM_1V1 */
|
|
|
|
regulator-compatible = "BUCK6";
|
|
|
|
regulator-min-microvolt = <1100000>;
|
|
|
|
regulator-max-microvolt = <1100000>;
|
|
|
|
regulator-always-on;
|
|
|
|
regulator-boot-on;
|
|
|
|
};
|
|
|
|
|
|
|
|
ldo1: LDO1 { /* NVCC_SNVS_1V8 */
|
|
|
|
regulator-compatible = "LDO1";
|
|
|
|
regulator-min-microvolt = <1800000>;
|
|
|
|
regulator-max-microvolt = <1800000>;
|
|
|
|
regulator-always-on;
|
|
|
|
regulator-boot-on;
|
|
|
|
};
|
|
|
|
|
|
|
|
ldo3: LDO3 { /* VDDA_1V8 */
|
|
|
|
regulator-compatible = "LDO3";
|
|
|
|
regulator-min-microvolt = <1800000>;
|
|
|
|
regulator-max-microvolt = <1800000>;
|
|
|
|
regulator-always-on;
|
|
|
|
regulator-boot-on;
|
|
|
|
};
|
|
|
|
|
|
|
|
ldo4: LDO4 { /* PMIC_LDO4 */
|
|
|
|
regulator-compatible = "LDO4";
|
|
|
|
regulator-min-microvolt = <3300000>;
|
|
|
|
regulator-max-microvolt = <3300000>;
|
|
|
|
};
|
|
|
|
|
|
|
|
ldo5: LDO5 { /* NVCC_SD2 */
|
|
|
|
regulator-compatible = "LDO5";
|
|
|
|
regulator-min-microvolt = <1800000>;
|
|
|
|
regulator-max-microvolt = <3300000>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
adc@48 {
|
|
|
|
compatible = "ti,tla2024";
|
|
|
|
reg = <0x48>;
|
|
|
|
#address-cells = <1>;
|
|
|
|
#size-cells = <0>;
|
|
|
|
|
|
|
|
channel@0 { /* Voltage over AIN0 and AIN1. */
|
|
|
|
reg = <0>;
|
|
|
|
};
|
|
|
|
|
|
|
|
channel@1 { /* Voltage over AIN0 and AIN3. */
|
|
|
|
reg = <1>;
|
|
|
|
};
|
|
|
|
|
|
|
|
channel@2 { /* Voltage over AIN1 and AIN3. */
|
|
|
|
reg = <2>;
|
|
|
|
};
|
|
|
|
|
|
|
|
channel@3 { /* Voltage over AIN2 and AIN3. */
|
|
|
|
reg = <3>;
|
|
|
|
};
|
|
|
|
|
|
|
|
channel@4 { /* Voltage over AIN0 and GND. */
|
|
|
|
reg = <4>;
|
|
|
|
};
|
|
|
|
|
|
|
|
channel@5 { /* Voltage over AIN1 and GND. */
|
|
|
|
reg = <5>;
|
|
|
|
};
|
|
|
|
|
|
|
|
channel@6 { /* Voltage over AIN2 and GND. */
|
|
|
|
reg = <6>;
|
|
|
|
};
|
|
|
|
|
|
|
|
channel@7 { /* Voltage over AIN3 and GND. */
|
|
|
|
reg = <7>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
touchscreen@49 {
|
|
|
|
compatible = "ti,tsc2004";
|
|
|
|
reg = <0x49>;
|
|
|
|
interrupts-extended = <&gpio4 0 IRQ_TYPE_EDGE_FALLING>;
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&pinctrl_touch>;
|
|
|
|
vio-supply = <&buck4>;
|
|
|
|
};
|
|
|
|
|
|
|
|
eeprom0: eeprom@50 { /* EEPROM with EQoS MAC address */
|
|
|
|
compatible = "atmel,24c02";
|
|
|
|
pagesize = <16>;
|
|
|
|
reg = <0x50>;
|
|
|
|
};
|
|
|
|
|
|
|
|
rv3032: rtc@51 {
|
|
|
|
compatible = "microcrystal,rv3032";
|
|
|
|
reg = <0x51>;
|
|
|
|
interrupts-extended = <&gpio5 5 IRQ_TYPE_LEVEL_LOW>;
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&pinctrl_rtc>;
|
|
|
|
};
|
|
|
|
|
|
|
|
eeprom1: eeprom@53 { /* EEPROM with FEC MAC address */
|
|
|
|
compatible = "atmel,24c02";
|
|
|
|
pagesize = <16>;
|
|
|
|
reg = <0x53>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
&i2c4 {
|
|
|
|
/*
|
|
|
|
* iMX8MP 1P33A Errata ERR007805
|
|
|
|
* I2C is limited to 384 kHz due to SoC bug.
|
|
|
|
*/
|
|
|
|
clock-frequency = <100000>;
|
|
|
|
pinctrl-names = "default", "gpio";
|
|
|
|
pinctrl-0 = <&pinctrl_i2c4>;
|
|
|
|
pinctrl-1 = <&pinctrl_i2c4_gpio>;
|
|
|
|
scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
|
|
|
|
sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
|
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
|
|
|
&i2c5 { /* HDMI EDID bus */
|
|
|
|
/*
|
|
|
|
* iMX8MP 1P33A Errata ERR007805
|
|
|
|
* I2C is limited to 384 kHz due to SoC bug.
|
|
|
|
*/
|
|
|
|
clock-frequency = <100000>;
|
|
|
|
pinctrl-names = "default", "gpio";
|
|
|
|
pinctrl-0 = <&pinctrl_i2c5>;
|
|
|
|
pinctrl-1 = <&pinctrl_i2c5_gpio>;
|
2022-08-12 20:41:55 +00:00
|
|
|
scl-gpios = <&gpio3 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
|
|
|
|
sda-gpios = <&gpio3 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
|
2022-05-21 14:56:26 +00:00
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
|
|
|
&pwm1 {
|
|
|
|
pinctrl-0 = <&pinctrl_pwm1>;
|
|
|
|
pinctrl-names = "default";
|
|
|
|
status = "disabled";
|
|
|
|
};
|
|
|
|
|
|
|
|
&uart1 {
|
|
|
|
/* CA53 console */
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&pinctrl_uart1>;
|
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
|
|
|
&uart2 {
|
|
|
|
/* Bluetooth */
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&pinctrl_uart2>;
|
|
|
|
uart-has-rtscts;
|
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
|
|
|
&uart3 {
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&pinctrl_uart3>;
|
|
|
|
uart-has-rtscts;
|
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
|
|
|
&uart4 {
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&pinctrl_uart4>;
|
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
|
|
|
&usb3_phy0 {
|
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
|
|
|
&usb3_0 {
|
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
|
|
|
&usb_dwc3_0 {
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&pinctrl_usb0_vbus>;
|
|
|
|
dr_mode = "otg";
|
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
|
|
|
&usb3_phy1 {
|
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
|
|
|
&usb3_1 {
|
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
|
|
|
&usb_dwc3_1 {
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&pinctrl_usb1_vbus>;
|
|
|
|
dr_mode = "host";
|
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
|
|
|
/* SDIO WiFi */
|
|
|
|
&usdhc1 {
|
|
|
|
pinctrl-names = "default", "state_100mhz", "state_200mhz";
|
|
|
|
pinctrl-0 = <&pinctrl_usdhc1>;
|
|
|
|
pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
|
|
|
|
pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
|
|
|
|
vmmc-supply = <&buck4>;
|
|
|
|
bus-width = <4>;
|
|
|
|
non-removable;
|
|
|
|
cap-power-off-card;
|
|
|
|
keep-power-in-suspend;
|
|
|
|
status = "okay";
|
|
|
|
|
|
|
|
#address-cells = <1>;
|
|
|
|
#size-cells = <0>;
|
|
|
|
|
|
|
|
brcmf: bcrmf@1 { /* muRata 2AE */
|
|
|
|
reg = <1>;
|
|
|
|
compatible = "cypress,cyw4373-fmac", "brcm,bcm4329-fmac";
|
|
|
|
/*
|
|
|
|
* The "host-wake" interrupt output is by default not
|
|
|
|
* connected to the SoC, but can be connected on to
|
|
|
|
* SoC pin on the carrier board.
|
|
|
|
*/
|
|
|
|
reset-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
/* SD slot */
|
|
|
|
&usdhc2 {
|
|
|
|
pinctrl-names = "default", "state_100mhz", "state_200mhz";
|
|
|
|
pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
|
|
|
|
pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
|
|
|
|
pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
|
|
|
|
cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
|
|
|
|
vmmc-supply = <®_usdhc2_vmmc>;
|
|
|
|
bus-width = <4>;
|
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
|
|
|
/* eMMC */
|
|
|
|
&usdhc3 {
|
|
|
|
pinctrl-names = "default", "state_100mhz", "state_200mhz";
|
|
|
|
pinctrl-0 = <&pinctrl_usdhc3>;
|
|
|
|
pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
|
|
|
|
pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
|
|
|
|
vmmc-supply = <&buck4>;
|
|
|
|
vqmmc-supply = <&buck5>;
|
|
|
|
bus-width = <8>;
|
|
|
|
non-removable;
|
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
|
|
|
&wdog1 {
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&pinctrl_wdog>;
|
|
|
|
fsl,ext-reset-output;
|
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
|
|
|
&iomuxc {
|
|
|
|
pinctrl-0 = <&pinctrl_hog_base
|
|
|
|
&pinctrl_dhcom_a &pinctrl_dhcom_b &pinctrl_dhcom_c
|
|
|
|
&pinctrl_dhcom_d &pinctrl_dhcom_e &pinctrl_dhcom_f
|
|
|
|
&pinctrl_dhcom_g &pinctrl_dhcom_h &pinctrl_dhcom_i
|
|
|
|
&pinctrl_dhcom_j &pinctrl_dhcom_k &pinctrl_dhcom_l
|
|
|
|
/* GPIO_M is connected to CLKOUT2 */
|
|
|
|
&pinctrl_dhcom_int>;
|
|
|
|
pinctrl-names = "default";
|
|
|
|
|
|
|
|
pinctrl_dhcom_a: dhcom-a-grp {
|
|
|
|
fsl,pins = <
|
|
|
|
/* ENET_QOS_EVENT0-OUT */
|
|
|
|
MX8MP_IOMUXC_GPIO1_IO09__GPIO1_IO09 0x2
|
|
|
|
>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pinctrl_dhcom_b: dhcom-b-grp {
|
|
|
|
fsl,pins = <
|
|
|
|
/* ENET_QOS_EVENT0-IN */
|
|
|
|
MX8MP_IOMUXC_GPIO1_IO08__GPIO1_IO08 0x2
|
|
|
|
>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pinctrl_dhcom_c: dhcom-c-grp {
|
|
|
|
fsl,pins = <
|
|
|
|
/* GPIO_C */
|
|
|
|
MX8MP_IOMUXC_SAI3_MCLK__GPIO5_IO02 0x2
|
|
|
|
>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pinctrl_dhcom_d: dhcom-d-grp {
|
|
|
|
fsl,pins = <
|
|
|
|
/* GPIO_D */
|
|
|
|
MX8MP_IOMUXC_SAI2_MCLK__GPIO4_IO27 0x2
|
|
|
|
>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pinctrl_dhcom_e: dhcom-e-grp {
|
|
|
|
fsl,pins = <
|
|
|
|
/* GPIO_E */
|
|
|
|
MX8MP_IOMUXC_UART1_RXD__GPIO5_IO22 0x2
|
|
|
|
>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pinctrl_dhcom_f: dhcom-f-grp {
|
|
|
|
fsl,pins = <
|
|
|
|
/* GPIO_F */
|
|
|
|
MX8MP_IOMUXC_UART1_TXD__GPIO5_IO23 0x2
|
|
|
|
>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pinctrl_dhcom_g: dhcom-g-grp {
|
|
|
|
fsl,pins = <
|
|
|
|
/* GPIO_G */
|
|
|
|
MX8MP_IOMUXC_GPIO1_IO00__GPIO1_IO00 0x2
|
|
|
|
>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pinctrl_dhcom_h: dhcom-h-grp {
|
|
|
|
fsl,pins = <
|
|
|
|
/* GPIO_H */
|
|
|
|
MX8MP_IOMUXC_GPIO1_IO11__GPIO1_IO11 0x2
|
|
|
|
>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pinctrl_dhcom_i: dhcom-i-grp {
|
|
|
|
fsl,pins = <
|
|
|
|
/* CSI1_SYNC */
|
|
|
|
MX8MP_IOMUXC_GPIO1_IO05__GPIO1_IO05 0x2
|
|
|
|
>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pinctrl_dhcom_j: dhcom-j-grp {
|
|
|
|
fsl,pins = <
|
|
|
|
/* CSIx_#RST */
|
|
|
|
MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06 0x2
|
|
|
|
>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pinctrl_dhcom_k: dhcom-k-grp {
|
|
|
|
fsl,pins = <
|
|
|
|
/* CSIx_PWDN */
|
|
|
|
MX8MP_IOMUXC_SD1_STROBE__GPIO2_IO11 0x2
|
|
|
|
>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pinctrl_dhcom_l: dhcom-l-grp {
|
|
|
|
fsl,pins = <
|
|
|
|
/* CSI2_SYNC */
|
|
|
|
MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07 0x2
|
|
|
|
>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pinctrl_dhcom_int: dhcom-int-grp {
|
|
|
|
fsl,pins = <
|
|
|
|
/* INT_HIGHEST_PRIO */
|
|
|
|
MX8MP_IOMUXC_SD2_WP__GPIO2_IO20 0x2
|
|
|
|
>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pinctrl_hog_base: dhcom-hog-base-grp {
|
|
|
|
fsl,pins = <
|
|
|
|
/* GPIOs for memory coding */
|
|
|
|
MX8MP_IOMUXC_SAI5_RXD1__GPIO3_IO22 0x40000080
|
|
|
|
MX8MP_IOMUXC_SAI5_RXD2__GPIO3_IO23 0x40000080
|
|
|
|
MX8MP_IOMUXC_SAI5_RXD3__GPIO3_IO24 0x40000080
|
|
|
|
/* GPIOs for hardware coding */
|
|
|
|
MX8MP_IOMUXC_NAND_DQS__GPIO3_IO14 0x40000080
|
|
|
|
MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19 0x40000080
|
|
|
|
MX8MP_IOMUXC_SAI5_MCLK__GPIO3_IO25 0x40000080
|
|
|
|
>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pinctrl_ecspi1: dhcom-ecspi1-grp {
|
|
|
|
fsl,pins = <
|
2022-08-12 20:41:54 +00:00
|
|
|
MX8MP_IOMUXC_I2C1_SCL__ECSPI1_SCLK 0x44
|
|
|
|
MX8MP_IOMUXC_I2C1_SDA__ECSPI1_MOSI 0x44
|
|
|
|
MX8MP_IOMUXC_I2C2_SCL__ECSPI1_MISO 0x44
|
|
|
|
MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17 0x40
|
2022-05-21 14:56:26 +00:00
|
|
|
>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pinctrl_ecspi2: dhcom-ecspi2-grp {
|
|
|
|
fsl,pins = <
|
|
|
|
MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK 0x44
|
|
|
|
MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI 0x44
|
|
|
|
MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO 0x44
|
|
|
|
MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13 0x40
|
|
|
|
>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pinctrl_eqos: dhcom-eqos-grp { /* RGMII */
|
|
|
|
fsl,pins = <
|
|
|
|
MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x3
|
|
|
|
MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO 0x3
|
|
|
|
MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x1f
|
|
|
|
MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x1f
|
|
|
|
MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x1f
|
|
|
|
MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x1f
|
|
|
|
MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x1f
|
|
|
|
MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x1f
|
|
|
|
MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x91
|
|
|
|
MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x91
|
|
|
|
MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x91
|
|
|
|
MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x91
|
|
|
|
MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2 0x91
|
|
|
|
MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3 0x91
|
|
|
|
>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pinctrl_enet_vio: dhcom-enet-vio-grp {
|
|
|
|
fsl,pins = <
|
|
|
|
MX8MP_IOMUXC_SD1_RESET_B__GPIO2_IO10 0x22
|
|
|
|
>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pinctrl_ethphy0: dhcom-ethphy0-grp {
|
|
|
|
fsl,pins = <
|
|
|
|
/* ENET1_#RST Reset */
|
|
|
|
MX8MP_IOMUXC_SAI5_RXC__GPIO3_IO20 0x22
|
|
|
|
/* ENET1_#INT Interrupt */
|
|
|
|
MX8MP_IOMUXC_SAI5_RXFS__GPIO3_IO19 0x22
|
|
|
|
>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pinctrl_ethphy1: dhcom-ethphy1-grp {
|
|
|
|
fsl,pins = <
|
|
|
|
/* ENET1_#RST Reset */
|
|
|
|
MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02 0x11
|
|
|
|
/* ENET1_#INT Interrupt */
|
|
|
|
MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03 0x11
|
|
|
|
>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pinctrl_fec: dhcom-fec-grp {
|
|
|
|
fsl,pins = <
|
|
|
|
MX8MP_IOMUXC_SAI1_MCLK__ENET1_TX_CLK 0x1f
|
|
|
|
MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC 0x3
|
|
|
|
MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO 0x3
|
|
|
|
MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0 0x91
|
|
|
|
MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1 0x91
|
|
|
|
MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2 0x91
|
|
|
|
MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3 0x91
|
|
|
|
MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC 0x91
|
|
|
|
MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL 0x91
|
|
|
|
MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0 0x1f
|
|
|
|
MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1 0x1f
|
|
|
|
MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2 0x1f
|
|
|
|
MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3 0x1f
|
|
|
|
MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL 0x1f
|
|
|
|
MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC 0x1f
|
|
|
|
MX8MP_IOMUXC_SAI1_TXD6__ENET1_RX_ER 0x1f
|
|
|
|
>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pinctrl_flexcan1: dhcom-flexcan1-grp {
|
|
|
|
fsl,pins = <
|
|
|
|
MX8MP_IOMUXC_SPDIF_RX__CAN1_RX 0x154
|
|
|
|
MX8MP_IOMUXC_SPDIF_TX__CAN1_TX 0x154
|
|
|
|
>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pinctrl_flexcan2: dhcom-flexcan2-grp {
|
|
|
|
fsl,pins = <
|
|
|
|
MX8MP_IOMUXC_UART3_RXD__CAN2_TX 0x154
|
|
|
|
MX8MP_IOMUXC_UART3_TXD__CAN2_RX 0x154
|
|
|
|
>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pinctrl_flexspi: dhcom-flexspi-grp {
|
|
|
|
fsl,pins = <
|
|
|
|
MX8MP_IOMUXC_NAND_ALE__FLEXSPI_A_SCLK 0x1c2
|
|
|
|
MX8MP_IOMUXC_NAND_CE0_B__FLEXSPI_A_SS0_B 0x82
|
|
|
|
MX8MP_IOMUXC_NAND_DATA00__FLEXSPI_A_DATA00 0x82
|
|
|
|
MX8MP_IOMUXC_NAND_DATA01__FLEXSPI_A_DATA01 0x82
|
|
|
|
MX8MP_IOMUXC_NAND_DATA02__FLEXSPI_A_DATA02 0x82
|
|
|
|
MX8MP_IOMUXC_NAND_DATA03__FLEXSPI_A_DATA03 0x82
|
|
|
|
>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pinctrl_hdmi: dhcom-hdmi-grp {
|
|
|
|
fsl,pins = <
|
|
|
|
MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC 0x154
|
|
|
|
MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD 0x154
|
|
|
|
>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pinctrl_i2c3: dhcom-i2c3-grp {
|
|
|
|
fsl,pins = <
|
|
|
|
MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL 0x40000084
|
|
|
|
MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA 0x40000084
|
|
|
|
>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pinctrl_i2c3_gpio: dhcom-i2c3-gpio-grp {
|
|
|
|
fsl,pins = <
|
|
|
|
MX8MP_IOMUXC_I2C3_SCL__GPIO5_IO18 0x84
|
|
|
|
MX8MP_IOMUXC_I2C3_SDA__GPIO5_IO19 0x84
|
|
|
|
>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pinctrl_i2c4: dhcom-i2c4-grp {
|
|
|
|
fsl,pins = <
|
|
|
|
MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL 0x40000084
|
|
|
|
MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA 0x40000084
|
|
|
|
>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pinctrl_i2c4_gpio: dhcom-i2c4-gpio-grp {
|
|
|
|
fsl,pins = <
|
|
|
|
MX8MP_IOMUXC_I2C4_SCL__GPIO5_IO20 0x84
|
|
|
|
MX8MP_IOMUXC_I2C4_SDA__GPIO5_IO21 0x84
|
|
|
|
>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pinctrl_i2c5: dhcom-i2c5-grp {
|
|
|
|
fsl,pins = <
|
|
|
|
MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL 0x40000084
|
|
|
|
MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA 0x40000084
|
|
|
|
>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pinctrl_i2c5_gpio: dhcom-i2c5-gpio-grp {
|
|
|
|
fsl,pins = <
|
|
|
|
MX8MP_IOMUXC_HDMI_DDC_SCL__GPIO3_IO26 0x84
|
|
|
|
MX8MP_IOMUXC_HDMI_DDC_SDA__GPIO3_IO27 0x84
|
|
|
|
>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pinctrl_pmic: dhcom-pmic-grp {
|
|
|
|
fsl,pins = <
|
|
|
|
/* PMIC_nINT */
|
|
|
|
MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03 0x40000090
|
|
|
|
>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pinctrl_pwm1: dhcom-pwm1-grp {
|
|
|
|
fsl,pins = <
|
|
|
|
MX8MP_IOMUXC_GPIO1_IO01__PWM1_OUT 0x6
|
|
|
|
>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pinctrl_rtc: dhcom-rtc-grp {
|
|
|
|
fsl,pins = <
|
|
|
|
/* RTC_#INT Interrupt */
|
|
|
|
MX8MP_IOMUXC_SPDIF_EXT_CLK__GPIO5_IO05 0x400001c6
|
|
|
|
>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pinctrl_touch: dhcom-touch-grp {
|
|
|
|
fsl,pins = <
|
|
|
|
/* #TOUCH_INT */
|
|
|
|
MX8MP_IOMUXC_SAI1_RXFS__GPIO4_IO00 0x40000080
|
|
|
|
>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pinctrl_uart1: dhcom-uart1-grp {
|
|
|
|
fsl,pins = <
|
|
|
|
/* Console UART */
|
|
|
|
MX8MP_IOMUXC_SAI2_RXC__UART1_DCE_RX 0x49
|
|
|
|
MX8MP_IOMUXC_SAI2_RXFS__UART1_DCE_TX 0x49
|
|
|
|
MX8MP_IOMUXC_SAI2_RXD0__UART1_DCE_RTS 0x49
|
|
|
|
MX8MP_IOMUXC_SAI2_TXFS__UART1_DCE_CTS 0x49
|
|
|
|
>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pinctrl_uart2: dhcom-uart2-grp {
|
|
|
|
fsl,pins = <
|
|
|
|
/* Bluetooth UART */
|
|
|
|
MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX 0x49
|
|
|
|
MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX 0x49
|
|
|
|
MX8MP_IOMUXC_SD1_DATA4__UART2_DCE_RTS 0x49
|
|
|
|
MX8MP_IOMUXC_SD1_DATA5__UART2_DCE_CTS 0x49
|
|
|
|
>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pinctrl_uart3: dhcom-uart3-grp {
|
|
|
|
fsl,pins = <
|
|
|
|
MX8MP_IOMUXC_ECSPI1_SCLK__UART3_DCE_RX 0x49
|
|
|
|
MX8MP_IOMUXC_ECSPI1_MOSI__UART3_DCE_TX 0x49
|
|
|
|
MX8MP_IOMUXC_ECSPI1_SS0__UART3_DCE_RTS 0x49
|
|
|
|
MX8MP_IOMUXC_ECSPI1_MISO__UART3_DCE_CTS 0x49
|
|
|
|
>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pinctrl_uart4: dhcom-uart4-grp {
|
|
|
|
fsl,pins = <
|
|
|
|
MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX 0x49
|
|
|
|
MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX 0x49
|
|
|
|
>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pinctrl_usb0_vbus: dhcom-usb0-grp {
|
|
|
|
fsl,pins = <
|
|
|
|
MX8MP_IOMUXC_GPIO1_IO10__USB1_OTG_ID 0x0
|
|
|
|
>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pinctrl_usb1_vbus: dhcom-usb1-grp {
|
|
|
|
fsl,pins = <
|
|
|
|
MX8MP_IOMUXC_GPIO1_IO14__USB2_OTG_PWR 0x6
|
|
|
|
MX8MP_IOMUXC_GPIO1_IO15__USB2_OTG_OC 0x80
|
|
|
|
>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pinctrl_usdhc1: dhcom-usdhc1-grp {
|
|
|
|
fsl,pins = <
|
|
|
|
MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK 0x190
|
|
|
|
MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD 0x1d0
|
|
|
|
MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0 0x1d0
|
|
|
|
MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1 0x1d0
|
|
|
|
MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2 0x1d0
|
|
|
|
MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3 0x1d0
|
|
|
|
/* BT_REG_EN */
|
|
|
|
MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12 0x144
|
|
|
|
/* WL_REG_EN */
|
|
|
|
MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13 0x144
|
|
|
|
>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pinctrl_usdhc1_100mhz: dhcom-usdhc1-100mhz-grp {
|
|
|
|
fsl,pins = <
|
|
|
|
MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK 0x194
|
|
|
|
MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD 0x1d4
|
|
|
|
MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0 0x1d4
|
|
|
|
MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1 0x1d4
|
|
|
|
MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2 0x1d4
|
|
|
|
MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3 0x1d4
|
|
|
|
/* BT_REG_EN */
|
|
|
|
MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12 0x144
|
|
|
|
/* WL_REG_EN */
|
|
|
|
MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13 0x144
|
|
|
|
>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pinctrl_usdhc1_200mhz: dhcom-usdhc1-200mhz-grp {
|
|
|
|
fsl,pins = <
|
|
|
|
MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK 0x196
|
|
|
|
MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD 0x1d6
|
|
|
|
MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0 0x1d6
|
|
|
|
MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1 0x1d6
|
|
|
|
MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2 0x1d6
|
|
|
|
MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3 0x1d6
|
|
|
|
/* BT_REG_EN */
|
|
|
|
MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12 0x144
|
|
|
|
/* WL_REG_EN */
|
|
|
|
MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13 0x144
|
|
|
|
>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pinctrl_usdhc2: dhcom-usdhc2-grp {
|
|
|
|
fsl,pins = <
|
|
|
|
MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x190
|
|
|
|
MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d0
|
|
|
|
MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d0
|
|
|
|
MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d0
|
|
|
|
MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d0
|
|
|
|
MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d0
|
|
|
|
MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1
|
|
|
|
>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pinctrl_usdhc2_100mhz: dhcom-usdhc2-100mhz-grp {
|
|
|
|
fsl,pins = <
|
|
|
|
MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x194
|
|
|
|
MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d4
|
|
|
|
MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d4
|
|
|
|
MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d4
|
|
|
|
MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d4
|
|
|
|
MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d4
|
|
|
|
MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1
|
|
|
|
>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pinctrl_usdhc2_200mhz: dhcom-usdhc2-200mhz-grp {
|
|
|
|
fsl,pins = <
|
|
|
|
MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x196
|
|
|
|
MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d6
|
|
|
|
MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d6
|
|
|
|
MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d6
|
|
|
|
MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d6
|
|
|
|
MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d6
|
|
|
|
MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1
|
|
|
|
>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pinctrl_usdhc2_vmmc: dhcom-usdhc2-vmmc-grp {
|
|
|
|
fsl,pins = <
|
|
|
|
MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x20
|
|
|
|
>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pinctrl_usdhc2_gpio: dhcom-usdhc2-gpio-grp {
|
|
|
|
fsl,pins = <
|
|
|
|
MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12 0x40000080
|
|
|
|
>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pinctrl_usdhc3: dhcom-usdhc3-grp {
|
|
|
|
fsl,pins = <
|
|
|
|
MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x190
|
|
|
|
MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d0
|
|
|
|
MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d0
|
|
|
|
MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d0
|
|
|
|
MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d0
|
|
|
|
MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d0
|
|
|
|
MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d0
|
|
|
|
MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d0
|
|
|
|
MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d0
|
|
|
|
MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d0
|
|
|
|
MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x190
|
|
|
|
MX8MP_IOMUXC_NAND_READY_B__USDHC3_RESET_B 0x141
|
|
|
|
>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pinctrl_usdhc3_100mhz: dhcom-usdhc3-100mhz-grp {
|
|
|
|
fsl,pins = <
|
|
|
|
MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x194
|
|
|
|
MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d4
|
|
|
|
MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d4
|
|
|
|
MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d4
|
|
|
|
MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d4
|
|
|
|
MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d4
|
|
|
|
MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d4
|
|
|
|
MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d4
|
|
|
|
MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d4
|
|
|
|
MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d4
|
|
|
|
MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x194
|
|
|
|
MX8MP_IOMUXC_NAND_READY_B__USDHC3_RESET_B 0x141
|
|
|
|
>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pinctrl_usdhc3_200mhz: dhcom-usdhc3-200mhz-grp {
|
|
|
|
fsl,pins = <
|
|
|
|
MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x196
|
|
|
|
MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d6
|
|
|
|
MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d6
|
|
|
|
MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d6
|
|
|
|
MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d6
|
|
|
|
MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d6
|
|
|
|
MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d6
|
|
|
|
MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d6
|
|
|
|
MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d6
|
|
|
|
MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d6
|
|
|
|
MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x196
|
|
|
|
MX8MP_IOMUXC_NAND_READY_B__USDHC3_RESET_B 0x141
|
|
|
|
>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pinctrl_wdog: dhcom-wdog-grp {
|
|
|
|
fsl,pins = <
|
|
|
|
MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B 0xc6
|
|
|
|
>;
|
|
|
|
};
|
|
|
|
};
|