Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-11 13:56:30 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/arch/arm/mach-uniphier/board_init.c

151 lines
3.1 KiB
C
Raw Normal View History

ARM: UniPhier: move pin_init() to board_early_init_f() Currently, I/O pin settings are not necessary for SPL. The board_early_init_f() seems a suitable place to call pin_init(). Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2015-02-05 05:42:54 +00:00
/*
ARM: uniphier: merge board init functions into board_init() Currently, the UniPhier platform calls several init functions in the following order: [1] spl_board_init() [2] board_early_init_f() [3] board_init() [4] board_early_init_r() [5] board_late_init() The serial console is not ready at the point of [2], so we want to avoid using [2] from the view point of debuggability. Fortunately, all of the initialization in [2] can be delayed until [3]. I see no good reason to split into [3] and [4]. So, merge [2] through [4]. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-09-13 16:06:08 +00:00
* Copyright (C) 2012-2015 Panasonic Corporation
* Copyright (C) 2015-2016 Socionext Inc.
* Author: Masahiro Yamada <yamada.masahiro@socionext.com>
ARM: UniPhier: move pin_init() to board_early_init_f() Currently, I/O pin settings are not necessary for SPL. The board_early_init_f() seems a suitable place to call pin_init(). Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2015-02-05 05:42:54 +00:00
*
* SPDX-License-Identifier: GPL-2.0+
*/
ARM: uniphier: clean up board_init Remove unnecessary DECLARE_GLOBAL_DATA_PTR and header includes. <common.h> has been replaced with <linux/errno.h> and <linux/printk.h>. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-11-29 06:01:22 +00:00
#include <linux/errno.h>
ARM: uniphier: add external IRQ setup code I will carry this work-around until it is cared in the kernel. This looks up the AIDET node and sets up a register to handle active low interrupt signals. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-06-29 10:39:03 +00:00
#include <linux/io.h>
ARM: uniphier: clean up board_init Remove unnecessary DECLARE_GLOBAL_DATA_PTR and header includes. <common.h> has been replaced with <linux/errno.h> and <linux/printk.h>. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-11-29 06:01:22 +00:00
#include <linux/printk.h>
ARM: uniphier: add external IRQ setup code I will carry this work-around until it is cared in the kernel. This looks up the AIDET node and sets up a register to handle active low interrupt signals. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-06-29 10:39:03 +00:00
ARM: uniphier: move headers out of include/mach directory These headers are only included locally in arch/arm/mach-uniphier/. There is no reason to export them by putting in the mach/ directory. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-01-08 16:51:13 +00:00
#include "init.h"
#include "micro-support-card.h"
#include "soc-info.h"
ARM: UniPhier: move pin_init() to board_early_init_f() Currently, I/O pin settings are not necessary for SPL. The board_early_init_f() seems a suitable place to call pin_init(). Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2015-02-05 05:42:54 +00:00
ARM: uniphier: refactor board_init() The code here is cluttered due to the switch statement. Introduce a table of callbacks to clean up the initialization code across SoCs. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-15 05:59:08 +00:00
#ifdef CONFIG_ARCH_UNIPHIER_LD20
static void uniphier_ld20_misc_init(void)
ARM: UniPhier: move pin_init() to board_early_init_f() Currently, I/O pin settings are not necessary for SPL. The board_early_init_f() seems a suitable place to call pin_init(). Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2015-02-05 05:42:54 +00:00
{
ARM: uniphier: refactor board_init() The code here is cluttered due to the switch statement. Introduce a table of callbacks to clean up the initialization code across SoCs. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-15 05:59:08 +00:00
/* ES1 errata: increase VDD09 supply to suppress VBO noise */
if (uniphier_get_soc_revision() == 1) {
writel(0x00000003, 0x6184e004);
writel(0x00000100, 0x6184e040);
writel(0x0000b500, 0x6184e024);
writel(0x00000001, 0x6184e000);
}
}
#endif
struct uniphier_initdata {
ARM: uniphier: simplify SoC ID get function Currently, uniphier_get_soc_type() converts the SoC ID (this is read from the revision register) to an enum symbol to use it for SoC identification. Come to think of it, there is no need for the conversion in the first place. Using the SoC ID from the register as-is a straightforward way. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-21 09:05:26 +00:00
unsigned int soc_id;
ARM: uniphier: move SBC and Support Card init code to U-Boot proper Initialize SBC and Support Card in U-Boot proper instead of SPL. We may run different firmware (ex. ARM Trusted Firmware) before U-Boot, and basic SoC initialization may be done there. In that case, SPL may not be used. The motivation for preparing SBC and Support Card in SPL was to use LED for early debugging, but this is not mandatory to boot SoCs. With this commit, LED will be unavailable in SPL, but we can use a debug serial instead. So, this change will not be a big deal. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-15 05:59:10 +00:00
void (*sbc_init)(void);
ARM: uniphier: refactor board_init() The code here is cluttered due to the switch statement. Introduce a table of callbacks to clean up the initialization code across SoCs. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-15 05:59:08 +00:00
void (*pll_init)(void);
void (*clk_init)(void);
void (*misc_init)(void);
};
ARM: UniPhier: move pin_init() to board_early_init_f() Currently, I/O pin settings are not necessary for SPL. The board_early_init_f() seems a suitable place to call pin_init(). Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2015-02-05 05:42:54 +00:00
ARM: uniphier: add missing static and const qualifier These are file-internal and constant. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-21 09:05:21 +00:00
static const struct uniphier_initdata uniphier_initdata[] = {
ARM: uniphier: drop PH1- prefix from CONFIG options and file names The current CONFIG names like "CONFIG_ARCH_UNIPHIER_PH1_PRO4" is too long. It would not hurt to drop "PH1_" because "UNIPHIER_" already well specifies the SoC family. Also, rename files for consistency. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-03-18 07:41:43 +00:00
#if defined(CONFIG_ARCH_UNIPHIER_LD4)
ARM: uniphier: refactor board_init() The code here is cluttered due to the switch statement. Introduce a table of callbacks to clean up the initialization code across SoCs. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-15 05:59:08 +00:00
{
ARM: uniphier: simplify SoC ID get function Currently, uniphier_get_soc_type() converts the SoC ID (this is read from the revision register) to an enum symbol to use it for SoC identification. Come to think of it, there is no need for the conversion in the first place. Using the SoC ID from the register as-is a straightforward way. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-21 09:05:26 +00:00
.soc_id = UNIPHIER_LD4_ID,
ARM: uniphier: move SBC and Support Card init code to U-Boot proper Initialize SBC and Support Card in U-Boot proper instead of SPL. We may run different firmware (ex. ARM Trusted Firmware) before U-Boot, and basic SoC initialization may be done there. In that case, SPL may not be used. The motivation for preparing SBC and Support Card in SPL was to use LED for early debugging, but this is not mandatory to boot SoCs. With this commit, LED will be unavailable in SPL, but we can use a debug serial instead. So, this change will not be a big deal. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-15 05:59:10 +00:00
.sbc_init = uniphier_ld4_sbc_init,
ARM: uniphier: refactor board_init() The code here is cluttered due to the switch statement. Introduce a table of callbacks to clean up the initialization code across SoCs. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-15 05:59:08 +00:00
.pll_init = uniphier_ld4_pll_init,
.clk_init = uniphier_ld4_clk_init,
},
ARM: uniphier: allow to enable multiple SoCs Before this commit, the Kconfig menu in mach-uniphier only allowed us to choose one SoC to be compiled. Each SoC has its own defconfig file for the build-test coverage. Consequently, some defconfig files are duplicated with only the difference in CONFIG_DEFAULT_DEVICE_TREE and CONFIG_{SOC_NAME}=y. Now, most of board-specific parameters have been moved to device trees, so it makes sense to include init code of multiple SoCs into a single image as long as the SoCs have similar architecture. In fact, some SoCs of UniPhier family are very similar: - PH1-LD4 and PH1-sLD8 - PH1-LD6b and ProXstream2 (will be added in the upcoming commit) This commit will be helpful to merge some defconfig files for better maintainability. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-09-21 15:27:39 +00:00
#endif
ARM: uniphier: drop PH1- prefix from CONFIG options and file names The current CONFIG names like "CONFIG_ARCH_UNIPHIER_PH1_PRO4" is too long. It would not hurt to drop "PH1_" because "UNIPHIER_" already well specifies the SoC family. Also, rename files for consistency. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-03-18 07:41:43 +00:00
#if defined(CONFIG_ARCH_UNIPHIER_PRO4)
ARM: uniphier: refactor board_init() The code here is cluttered due to the switch statement. Introduce a table of callbacks to clean up the initialization code across SoCs. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-15 05:59:08 +00:00
{
ARM: uniphier: simplify SoC ID get function Currently, uniphier_get_soc_type() converts the SoC ID (this is read from the revision register) to an enum symbol to use it for SoC identification. Come to think of it, there is no need for the conversion in the first place. Using the SoC ID from the register as-is a straightforward way. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-21 09:05:26 +00:00
.soc_id = UNIPHIER_PRO4_ID,
ARM: uniphier: move SBC and Support Card init code to U-Boot proper Initialize SBC and Support Card in U-Boot proper instead of SPL. We may run different firmware (ex. ARM Trusted Firmware) before U-Boot, and basic SoC initialization may be done there. In that case, SPL may not be used. The motivation for preparing SBC and Support Card in SPL was to use LED for early debugging, but this is not mandatory to boot SoCs. With this commit, LED will be unavailable in SPL, but we can use a debug serial instead. So, this change will not be a big deal. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-15 05:59:10 +00:00
.sbc_init = uniphier_sbc_init_savepin,
ARM: uniphier: refactor board_init() The code here is cluttered due to the switch statement. Introduce a table of callbacks to clean up the initialization code across SoCs. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-15 05:59:08 +00:00
.pll_init = uniphier_pro4_pll_init,
.clk_init = uniphier_pro4_clk_init,
},
ARM: uniphier: allow to enable multiple SoCs Before this commit, the Kconfig menu in mach-uniphier only allowed us to choose one SoC to be compiled. Each SoC has its own defconfig file for the build-test coverage. Consequently, some defconfig files are duplicated with only the difference in CONFIG_DEFAULT_DEVICE_TREE and CONFIG_{SOC_NAME}=y. Now, most of board-specific parameters have been moved to device trees, so it makes sense to include init code of multiple SoCs into a single image as long as the SoCs have similar architecture. In fact, some SoCs of UniPhier family are very similar: - PH1-LD4 and PH1-sLD8 - PH1-LD6b and ProXstream2 (will be added in the upcoming commit) This commit will be helpful to merge some defconfig files for better maintainability. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-09-21 15:27:39 +00:00
#endif
ARM: uniphier: drop PH1- prefix from CONFIG options and file names The current CONFIG names like "CONFIG_ARCH_UNIPHIER_PH1_PRO4" is too long. It would not hurt to drop "PH1_" because "UNIPHIER_" already well specifies the SoC family. Also, rename files for consistency. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-03-18 07:41:43 +00:00
#if defined(CONFIG_ARCH_UNIPHIER_SLD8)
ARM: uniphier: refactor board_init() The code here is cluttered due to the switch statement. Introduce a table of callbacks to clean up the initialization code across SoCs. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-15 05:59:08 +00:00
{
ARM: uniphier: simplify SoC ID get function Currently, uniphier_get_soc_type() converts the SoC ID (this is read from the revision register) to an enum symbol to use it for SoC identification. Come to think of it, there is no need for the conversion in the first place. Using the SoC ID from the register as-is a straightforward way. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-21 09:05:26 +00:00
.soc_id = UNIPHIER_SLD8_ID,
ARM: uniphier: move SBC and Support Card init code to U-Boot proper Initialize SBC and Support Card in U-Boot proper instead of SPL. We may run different firmware (ex. ARM Trusted Firmware) before U-Boot, and basic SoC initialization may be done there. In that case, SPL may not be used. The motivation for preparing SBC and Support Card in SPL was to use LED for early debugging, but this is not mandatory to boot SoCs. With this commit, LED will be unavailable in SPL, but we can use a debug serial instead. So, this change will not be a big deal. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-15 05:59:10 +00:00
.sbc_init = uniphier_ld4_sbc_init,
ARM: uniphier: refactor board_init() The code here is cluttered due to the switch statement. Introduce a table of callbacks to clean up the initialization code across SoCs. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-15 05:59:08 +00:00
.pll_init = uniphier_ld4_pll_init,
.clk_init = uniphier_ld4_clk_init,
},
ARM: uniphier: add PH1-Pro5 support The DDR SDRAM initialization code has not been mainlined yet, but U-Boot proper should work. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-09-21 15:27:40 +00:00
#endif
ARM: uniphier: drop PH1- prefix from CONFIG options and file names The current CONFIG names like "CONFIG_ARCH_UNIPHIER_PH1_PRO4" is too long. It would not hurt to drop "PH1_" because "UNIPHIER_" already well specifies the SoC family. Also, rename files for consistency. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-03-18 07:41:43 +00:00
#if defined(CONFIG_ARCH_UNIPHIER_PRO5)
ARM: uniphier: refactor board_init() The code here is cluttered due to the switch statement. Introduce a table of callbacks to clean up the initialization code across SoCs. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-15 05:59:08 +00:00
{
ARM: uniphier: simplify SoC ID get function Currently, uniphier_get_soc_type() converts the SoC ID (this is read from the revision register) to an enum symbol to use it for SoC identification. Come to think of it, there is no need for the conversion in the first place. Using the SoC ID from the register as-is a straightforward way. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-21 09:05:26 +00:00
.soc_id = UNIPHIER_PRO5_ID,
ARM: uniphier: move SBC and Support Card init code to U-Boot proper Initialize SBC and Support Card in U-Boot proper instead of SPL. We may run different firmware (ex. ARM Trusted Firmware) before U-Boot, and basic SoC initialization may be done there. In that case, SPL may not be used. The motivation for preparing SBC and Support Card in SPL was to use LED for early debugging, but this is not mandatory to boot SoCs. With this commit, LED will be unavailable in SPL, but we can use a debug serial instead. So, this change will not be a big deal. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-15 05:59:10 +00:00
.sbc_init = uniphier_sbc_init_savepin,
ARM: uniphier: refactor board_init() The code here is cluttered due to the switch statement. Introduce a table of callbacks to clean up the initialization code across SoCs. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-15 05:59:08 +00:00
.clk_init = uniphier_pro5_clk_init,
},
ARM: uniphier: add ProXstream2 and PH1-LD6b support The DDR SDRAM initialization code has not been mainlined yet, but U-Boot proper should work. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-09-21 15:27:41 +00:00
#endif
ARM: uniphier: drop PH1- prefix from CONFIG options and file names The current CONFIG names like "CONFIG_ARCH_UNIPHIER_PH1_PRO4" is too long. It would not hurt to drop "PH1_" because "UNIPHIER_" already well specifies the SoC family. Also, rename files for consistency. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-03-18 07:41:43 +00:00
#if defined(CONFIG_ARCH_UNIPHIER_PXS2)
ARM: uniphier: refactor board_init() The code here is cluttered due to the switch statement. Introduce a table of callbacks to clean up the initialization code across SoCs. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-15 05:59:08 +00:00
{
ARM: uniphier: simplify SoC ID get function Currently, uniphier_get_soc_type() converts the SoC ID (this is read from the revision register) to an enum symbol to use it for SoC identification. Come to think of it, there is no need for the conversion in the first place. Using the SoC ID from the register as-is a straightforward way. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-21 09:05:26 +00:00
.soc_id = UNIPHIER_PXS2_ID,
ARM: uniphier: move SBC and Support Card init code to U-Boot proper Initialize SBC and Support Card in U-Boot proper instead of SPL. We may run different firmware (ex. ARM Trusted Firmware) before U-Boot, and basic SoC initialization may be done there. In that case, SPL may not be used. The motivation for preparing SBC and Support Card in SPL was to use LED for early debugging, but this is not mandatory to boot SoCs. With this commit, LED will be unavailable in SPL, but we can use a debug serial instead. So, this change will not be a big deal. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-15 05:59:10 +00:00
.sbc_init = uniphier_pxs2_sbc_init,
ARM: uniphier: refactor board_init() The code here is cluttered due to the switch statement. Introduce a table of callbacks to clean up the initialization code across SoCs. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-15 05:59:08 +00:00
.clk_init = uniphier_pxs2_clk_init,
},
ARM: uniphier: add ProXstream2 and PH1-LD6b support The DDR SDRAM initialization code has not been mainlined yet, but U-Boot proper should work. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-09-21 15:27:41 +00:00
#endif
ARM: uniphier: drop PH1- prefix from CONFIG options and file names The current CONFIG names like "CONFIG_ARCH_UNIPHIER_PH1_PRO4" is too long. It would not hurt to drop "PH1_" because "UNIPHIER_" already well specifies the SoC family. Also, rename files for consistency. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-03-18 07:41:43 +00:00
#if defined(CONFIG_ARCH_UNIPHIER_LD6B)
ARM: uniphier: refactor board_init() The code here is cluttered due to the switch statement. Introduce a table of callbacks to clean up the initialization code across SoCs. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-15 05:59:08 +00:00
{
ARM: uniphier: simplify SoC ID get function Currently, uniphier_get_soc_type() converts the SoC ID (this is read from the revision register) to an enum symbol to use it for SoC identification. Come to think of it, there is no need for the conversion in the first place. Using the SoC ID from the register as-is a straightforward way. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-21 09:05:26 +00:00
.soc_id = UNIPHIER_LD6B_ID,
ARM: uniphier: move SBC and Support Card init code to U-Boot proper Initialize SBC and Support Card in U-Boot proper instead of SPL. We may run different firmware (ex. ARM Trusted Firmware) before U-Boot, and basic SoC initialization may be done there. In that case, SPL may not be used. The motivation for preparing SBC and Support Card in SPL was to use LED for early debugging, but this is not mandatory to boot SoCs. With this commit, LED will be unavailable in SPL, but we can use a debug serial instead. So, this change will not be a big deal. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-15 05:59:10 +00:00
.sbc_init = uniphier_pxs2_sbc_init,
ARM: uniphier: refactor board_init() The code here is cluttered due to the switch statement. Introduce a table of callbacks to clean up the initialization code across SoCs. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-15 05:59:08 +00:00
.clk_init = uniphier_pxs2_clk_init,
},
ARM: uniphier: add PH1-LD20 SoC support This is the first ARMv8 SoC from Socionext Inc. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-04-21 05:43:18 +00:00
#endif
ARM: uniphier: add PH1-LD11 SoC support This is a low-cost ARMv8 SoC from Socionext Inc. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-05-24 12:14:01 +00:00
#if defined(CONFIG_ARCH_UNIPHIER_LD11)
ARM: uniphier: refactor board_init() The code here is cluttered due to the switch statement. Introduce a table of callbacks to clean up the initialization code across SoCs. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-15 05:59:08 +00:00
{
ARM: uniphier: simplify SoC ID get function Currently, uniphier_get_soc_type() converts the SoC ID (this is read from the revision register) to an enum symbol to use it for SoC identification. Come to think of it, there is no need for the conversion in the first place. Using the SoC ID from the register as-is a straightforward way. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-21 09:05:26 +00:00
.soc_id = UNIPHIER_LD11_ID,
ARM: uniphier: move SBC and Support Card init code to U-Boot proper Initialize SBC and Support Card in U-Boot proper instead of SPL. We may run different firmware (ex. ARM Trusted Firmware) before U-Boot, and basic SoC initialization may be done there. In that case, SPL may not be used. The motivation for preparing SBC and Support Card in SPL was to use LED for early debugging, but this is not mandatory to boot SoCs. With this commit, LED will be unavailable in SPL, but we can use a debug serial instead. So, this change will not be a big deal. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-15 05:59:10 +00:00
.sbc_init = uniphier_ld11_sbc_init,
ARM: uniphier: refactor board_init() The code here is cluttered due to the switch statement. Introduce a table of callbacks to clean up the initialization code across SoCs. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-15 05:59:08 +00:00
.pll_init = uniphier_ld11_pll_init,
.clk_init = uniphier_ld11_clk_init,
},
ARM: uniphier: add PH1-LD11 SoC support This is a low-cost ARMv8 SoC from Socionext Inc. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-05-24 12:14:01 +00:00
#endif
ARM: uniphier: add PH1-LD20 SoC support This is the first ARMv8 SoC from Socionext Inc. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-04-21 05:43:18 +00:00
#if defined(CONFIG_ARCH_UNIPHIER_LD20)
ARM: uniphier: refactor board_init() The code here is cluttered due to the switch statement. Introduce a table of callbacks to clean up the initialization code across SoCs. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-15 05:59:08 +00:00
{
ARM: uniphier: simplify SoC ID get function Currently, uniphier_get_soc_type() converts the SoC ID (this is read from the revision register) to an enum symbol to use it for SoC identification. Come to think of it, there is no need for the conversion in the first place. Using the SoC ID from the register as-is a straightforward way. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-21 09:05:26 +00:00
.soc_id = UNIPHIER_LD20_ID,
ARM: uniphier: move SBC and Support Card init code to U-Boot proper Initialize SBC and Support Card in U-Boot proper instead of SPL. We may run different firmware (ex. ARM Trusted Firmware) before U-Boot, and basic SoC initialization may be done there. In that case, SPL may not be used. The motivation for preparing SBC and Support Card in SPL was to use LED for early debugging, but this is not mandatory to boot SoCs. With this commit, LED will be unavailable in SPL, but we can use a debug serial instead. So, this change will not be a big deal. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-15 05:59:10 +00:00
.sbc_init = uniphier_ld11_sbc_init,
ARM: uniphier: refactor board_init() The code here is cluttered due to the switch statement. Introduce a table of callbacks to clean up the initialization code across SoCs. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-15 05:59:08 +00:00
.pll_init = uniphier_ld20_pll_init,
ARM: uniphier: deassert RST_n of eMMC device for LD11/LD20 For LD11 and LD20 SoCs, the RST_n pin is asserted by default. If the EXT_CSD[162], bit[1:0] (RST_n_ENABLE) is fused, the eMMC device would stay in the reset state until its RST_n pin is deasserted by software. Currently, this is cared by an ad-hoc way because the eMMC hardware reset provider is not supported in U-Boot for now. This code should be re-written once the "mmc-pwrseq-emmc" binding is supported. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-02-17 07:17:22 +00:00
.clk_init = uniphier_ld20_clk_init,
ARM: uniphier: refactor board_init() The code here is cluttered due to the switch statement. Introduce a table of callbacks to clean up the initialization code across SoCs. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-15 05:59:08 +00:00
.misc_init = uniphier_ld20_misc_init,
},
ARM: uniphier: allow to enable multiple SoCs Before this commit, the Kconfig menu in mach-uniphier only allowed us to choose one SoC to be compiled. Each SoC has its own defconfig file for the build-test coverage. Consequently, some defconfig files are duplicated with only the difference in CONFIG_DEFAULT_DEVICE_TREE and CONFIG_{SOC_NAME}=y. Now, most of board-specific parameters have been moved to device trees, so it makes sense to include init code of multiple SoCs into a single image as long as the SoCs have similar architecture. In fact, some SoCs of UniPhier family are very similar: - PH1-LD4 and PH1-sLD8 - PH1-LD6b and ProXstream2 (will be added in the upcoming commit) This commit will be helpful to merge some defconfig files for better maintainability. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-09-21 15:27:39 +00:00
#endif
ARM: uniphier: add PXs3 SoC support Initial support for PXs3 SoC. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-21 09:05:31 +00:00
#if defined(CONFIG_ARCH_UNIPHIER_PXS3)
{
.soc_id = UNIPHIER_PXS3_ID,
.sbc_init = uniphier_pxs2_sbc_init,
.pll_init = uniphier_pxs3_pll_init,
ARM: uniphier: add more init code for PXs3 Add the boot device table and reset deassertion for eMMC. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-05-15 05:26:33 +00:00
.clk_init = uniphier_pxs3_clk_init,
ARM: uniphier: add PXs3 SoC support Initial support for PXs3 SoC. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-21 09:05:31 +00:00
},
#endif
ARM: uniphier: refactor board_init() The code here is cluttered due to the switch statement. Introduce a table of callbacks to clean up the initialization code across SoCs. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-15 05:59:08 +00:00
};
ARM: uniphier: add macro to generate SoC data look-up function There are similar functions that look up SoC data by the SoC ID. The new macro UNIPHIER_DEFINE_SOCDATA_FUNC will be helpful to avoid the code duplication. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-21 09:05:27 +00:00
UNIPHIER_DEFINE_SOCDATA_FUNC(uniphier_get_initdata, uniphier_initdata)
ARM: uniphier: refactor board_init() The code here is cluttered due to the switch statement. Introduce a table of callbacks to clean up the initialization code across SoCs. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-15 05:59:08 +00:00
int board_init(void)
{
ARM: uniphier: add missing static and const qualifier These are file-internal and constant. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-21 09:05:21 +00:00
const struct uniphier_initdata *initdata;
ARM: uniphier: refactor board_init() The code here is cluttered due to the switch statement. Introduce a table of callbacks to clean up the initialization code across SoCs. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-15 05:59:08 +00:00
led_puts("U0");
ARM: uniphier: add macro to generate SoC data look-up function There are similar functions that look up SoC data by the SoC ID. The new macro UNIPHIER_DEFINE_SOCDATA_FUNC will be helpful to avoid the code duplication. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-21 09:05:27 +00:00
initdata = uniphier_get_initdata();
ARM: uniphier: refactor board_init() The code here is cluttered due to the switch statement. Introduce a table of callbacks to clean up the initialization code across SoCs. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-15 05:59:08 +00:00
if (!initdata) {
ARM: uniphier: add macro to generate SoC data look-up function There are similar functions that look up SoC data by the SoC ID. The new macro UNIPHIER_DEFINE_SOCDATA_FUNC will be helpful to avoid the code duplication. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-21 09:05:27 +00:00
pr_err("unsupported SoC\n");
ARM: uniphier: refactor board_init() The code here is cluttered due to the switch statement. Introduce a table of callbacks to clean up the initialization code across SoCs. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-15 05:59:08 +00:00
return -EINVAL;
}
ARM: uniphier: move SBC and Support Card init code to U-Boot proper Initialize SBC and Support Card in U-Boot proper instead of SPL. We may run different firmware (ex. ARM Trusted Firmware) before U-Boot, and basic SoC initialization may be done there. In that case, SPL may not be used. The motivation for preparing SBC and Support Card in SPL was to use LED for early debugging, but this is not mandatory to boot SoCs. With this commit, LED will be unavailable in SPL, but we can use a debug serial instead. So, this change will not be a big deal. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-15 05:59:10 +00:00
initdata->sbc_init();
support_card_init();
led_puts("U0");
ARM: uniphier: refactor board_init() The code here is cluttered due to the switch statement. Introduce a table of callbacks to clean up the initialization code across SoCs. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-15 05:59:08 +00:00
if (initdata->pll_init)
initdata->pll_init();
ARM: uniphier: add external IRQ setup code I will carry this work-around until it is cared in the kernel. This looks up the AIDET node and sets up a register to handle active low interrupt signals. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-06-29 10:39:03 +00:00
ARM: uniphier: remove ad-hoc pin settings for NAND This is now set up by the pinctrl driver when the NAND driver is probed. Remove the legacy code. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-08-26 08:58:03 +00:00
led_puts("U1");
ARM: UniPhier: split clkrst_init() into two functions Split the current clkrst_init() into two functions: - early_clkrst_init(): called from SPL Deassert the reset signals of the memory controller and some other basic cores. - clkrst_init(): called from main U-boot Deassert the reset signals that are necessary for the access to peripherals etc. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2015-02-26 17:26:51 +00:00
ARM: uniphier: refactor board_init() The code here is cluttered due to the switch statement. Introduce a table of callbacks to clean up the initialization code across SoCs. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-15 05:59:08 +00:00
if (initdata->clk_init)
initdata->clk_init();
ARM: uniphier: merge board init functions into board_init() Currently, the UniPhier platform calls several init functions in the following order: [1] spl_board_init() [2] board_early_init_f() [3] board_init() [4] board_early_init_r() [5] board_late_init() The serial console is not ready at the point of [2], so we want to avoid using [2] from the view point of debuggability. Fortunately, all of the initialization in [2] can be delayed until [3]. I see no good reason to split into [3] and [4]. So, merge [2] through [4]. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-09-13 16:06:08 +00:00
ARM: uniphier: remove ad-hoc pin settings for NAND This is now set up by the pinctrl driver when the NAND driver is probed. Remove the legacy code. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-08-26 08:58:03 +00:00
led_puts("U2");
ARM: uniphier: merge board init functions into board_init() Currently, the UniPhier platform calls several init functions in the following order: [1] spl_board_init() [2] board_early_init_f() [3] board_init() [4] board_early_init_r() [5] board_late_init() The serial console is not ready at the point of [2], so we want to avoid using [2] from the view point of debuggability. Fortunately, all of the initialization in [2] can be delayed until [3]. I see no good reason to split into [3] and [4]. So, merge [2] through [4]. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-09-13 16:06:08 +00:00
ARM: uniphier: refactor board_init() The code here is cluttered due to the switch statement. Introduce a table of callbacks to clean up the initialization code across SoCs. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-15 05:59:08 +00:00
if (initdata->misc_init)
initdata->misc_init();
ARM: uniphier: remove ad-hoc pin settings for NAND This is now set up by the pinctrl driver when the NAND driver is probed. Remove the legacy code. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-08-26 08:58:03 +00:00
led_puts("U3");
ARM: uniphier: refactor board_init() The code here is cluttered due to the switch statement. Introduce a table of callbacks to clean up the initialization code across SoCs. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-15 05:59:08 +00:00
support_card_late_init();
ARM: uniphier: merge board init functions into board_init() Currently, the UniPhier platform calls several init functions in the following order: [1] spl_board_init() [2] board_early_init_f() [3] board_init() [4] board_early_init_r() [5] board_late_init() The serial console is not ready at the point of [2], so we want to avoid using [2] from the view point of debuggability. Fortunately, all of the initialization in [2] can be delayed until [3]. I see no good reason to split into [3] and [4]. So, merge [2] through [4]. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-09-13 16:06:08 +00:00
led_puts("Uboo");
ARM: UniPhier: move pin_init() to board_early_init_f() Currently, I/O pin settings are not necessary for SPL. The board_early_init_f() seems a suitable place to call pin_init(). Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2015-02-05 05:42:54 +00:00
return 0;
}
Reference in a new issue Copy permalink