u-boot/include/configs/zc5202.h

/* SPDX-License-Identifier: GPL-2.0+ */
/*
 * Copyright (C) Stefano Babic <sbabic@denx.de>
 *
 * Configuration settings for the E+L i.MX6Q DO82 board.
 */

#ifndef __EL_ZC5202_H
#define __EL_ZC5202_H

#define CONFIG_MXC_UART_BASE	UART2_BASE
#define CONSOLE_DEV		"ttymxc1"
#define CONFIG_MMCROOT			"/dev/mmcblk0p2"

#include "el6x_common.h"

/* Ethernet */
#define CONFIG_FEC_MXC
#define IMX_FEC_BASE				ENET_BASE_ADDR
#define CONFIG_FEC_XCV_TYPE			MII100
#define CONFIG_ETHPRIME				"FEC"
#define CONFIG_FEC_MXC_PHYADDR			0

#define CONFIG_PCI_SCAN_SHOW
#define CONFIG_PCIE_IMX

#endif                         /*__EL6Q_CONFIG_H */
SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com> 2018-05-06 21:58:06 +00:00			`/* SPDX-License-Identifier: GPL-2.0+ */`
mx6: add support for el6x board Custom Board based on MX6 Dual, 1GB RAM and eMMC. There are two variants of the board with and without PCIe (ZC5202 and ZC5601). Signed-off-by: Stefano Babic <sbabic@denx.de> 2016-06-06 09:19:42 +00:00			`/*`
			`* Copyright (C) Stefano Babic <sbabic@denx.de>`
			`*`
			`* Configuration settings for the E+L i.MX6Q DO82 board.`
			`*/`

			`#ifndef __EL_ZC5202_H`
			`#define __EL_ZC5202_H`

			`#define CONFIG_MXC_UART_BASE UART2_BASE`
config: Drop CONFIG_CONSOLE_DEV This is not really a config. Rename it to avoid confusion. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Jagan Teki <jteki@openedev.com> 2016-10-18 02:12:39 +00:00			`#define CONSOLE_DEV "ttymxc1"`
mx6: add support for el6x board Custom Board based on MX6 Dual, 1GB RAM and eMMC. There are two variants of the board with and without PCIe (ZC5202 and ZC5601). Signed-off-by: Stefano Babic <sbabic@denx.de> 2016-06-06 09:19:42 +00:00			`#define CONFIG_MMCROOT "/dev/mmcblk0p2"`

			`#include "el6x_common.h"`

			`/* Ethernet */`
			`#define CONFIG_FEC_MXC`
			`#define IMX_FEC_BASE ENET_BASE_ADDR`
			`#define CONFIG_FEC_XCV_TYPE MII100`
			`#define CONFIG_ETHPRIME "FEC"`
			`#define CONFIG_FEC_MXC_PHYADDR 0`

			`#define CONFIG_PCI_SCAN_SHOW`
			`#define CONFIG_PCIE_IMX`

			`#endif /__EL6Q_CONFIG_H /`