u-boot/include/configs/bcm_ep_board.h

/* SPDX-License-Identifier: GPL-2.0+ */
/*
 * Copyright 2014 Broadcom Corporation.
 */

#ifndef __BCM_EP_BOARD_H
#define __BCM_EP_BOARD_H

#include <asm/arch/configs.h>

#define CONFIG_SKIP_LOWLEVEL_INIT

/*
 * Memory configuration
 * (these must be defined elsewhere)
 */
#ifndef CONFIG_SYS_TEXT_BASE
#error	CONFIG_SYS_TEXT_BASE must be defined!
#endif
#ifndef CONFIG_SYS_SDRAM_BASE
#error	CONFIG_SYS_SDRAM_BASE must be defined!
#endif
#ifndef CONFIG_SYS_SDRAM_SIZE
#error	CONFIG_SYS_SDRAM_SIZE must be defined!
#endif

#define CONFIG_SYS_MALLOC_LEN		(4 * 1024 * 1024)

/* Some commands use this as the default load address */
#define CONFIG_SYS_LOAD_ADDR		CONFIG_SYS_SDRAM_BASE

/*
 * This is the initial SP which is used only briefly for relocating the u-boot
 * image to the top of SDRAM. After relocation u-boot moves the stack to the
 * proper place.
 */
#define CONFIG_SYS_INIT_SP_ADDR		CONFIG_SYS_TEXT_BASE

/* Serial Info */
#define CONFIG_SYS_NS16550_SERIAL

/* console configuration */
#define CONFIG_SYS_CBSIZE		1024	/* Console buffer size */
#define CONFIG_SYS_MAXARGS		64
#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE

/* version string, parser, etc */

/* Enable Time Command */

#endif /* __BCM_EP_BOARD_H */
SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com> 2018-05-06 21:58:06 +00:00			`/* SPDX-License-Identifier: GPL-2.0+ */`
arm: add Cygnus and NSP boards The bcm_ep board configuration is used by a number of boards including Cygnus and NSP. Add builds for the bcm958300k and the bcm958622hr boards. Signed-off-by: Scott Branden <sbranden@broadcom.com> Signed-off-by: Steve Rae <srae@broadcom.com> 2014-08-11 20:58:25 +00:00			`/*`
			`* Copyright 2014 Broadcom Corporation.`
			`*/`

			`#ifndef __BCM_EP_BOARD_H`
			`#define __BCM_EP_BOARD_H`

			`#include <asm/arch/configs.h>`

			`#define CONFIG_SKIP_LOWLEVEL_INIT`

			`/*`
			`* Memory configuration`
			`* (these must be defined elsewhere)`
			`*/`
			`#ifndef CONFIG_SYS_TEXT_BASE`
			`#error CONFIG_SYS_TEXT_BASE must be defined!`
			`#endif`
			`#ifndef CONFIG_SYS_SDRAM_BASE`
			`#error CONFIG_SYS_SDRAM_BASE must be defined!`
			`#endif`
			`#ifndef CONFIG_SYS_SDRAM_SIZE`
			`#error CONFIG_SYS_SDRAM_SIZE must be defined!`
			`#endif`

			`#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024)`

			`/* Some commands use this as the default load address */`
			`#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE`

			`/*`
			`* This is the initial SP which is used only briefly for relocating the u-boot`
			`* image to the top of SDRAM. After relocation u-boot moves the stack to the`
			`* proper place.`
			`*/`
			`#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_TEXT_BASE`

			`/* Serial Info */`
			`#define CONFIG_SYS_NS16550_SERIAL`

			`/* console configuration */`
			`#define CONFIG_SYS_CBSIZE 1024 /* Console buffer size */`
			`#define CONFIG_SYS_MAXARGS 64`
			`#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE`

			`/* version string, parser, etc */`

			`/* Enable Time Command */`

			`#endif /* __BCM_EP_BOARD_H */`