u-boot/arch/arm/dts/armada-37xx.dtsi

525 lines
12 KiB
Text
Raw Normal View History

// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Device Tree Include file for Marvell Armada 37xx family of SoCs.
*
* Copyright (C) 2016 Marvell
*
* Gregory CLEMENT <gregory.clement@free-electrons.com>
*
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
/ {
model = "Marvell Armada 37xx SoC";
compatible = "marvell,armada3700";
interrupt-parent = <&gic>;
#address-cells = <2>;
#size-cells = <2>;
aliases {
serial0 = &uart0;
serial1 = &uart1;
};
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
/*
* The PSCI firmware region depicted below is the default one
* and should be updated by the bootloader.
*/
psci-area@4000000 {
reg = <0 0x4000000 0 0x200000>;
no-map;
};
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0>;
clocks = <&nb_periph_clk 16>;
enable-method = "psci";
};
};
psci {
compatible = "arm,psci-0.2";
method = "smc";
};
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>,
<GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>,
<GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>,
<GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>;
};
pmu {
compatible = "arm,armv8-pmuv3";
interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
};
soc {
compatible = "simple-bus";
#address-cells = <2>;
#size-cells = <2>;
ranges;
internal-regs@d0000000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
/* 32M internal register @ 0xd000_0000 */
ranges = <0x0 0x0 0xd0000000 0x2000000>;
wdt: watchdog@8300 {
compatible = "marvell,armada-3700-wdt";
reg = <0x8300 0x40>;
marvell,system-controller = <&cpu_misc>;
clocks = <&xtalclk>;
};
cpu_misc: system-controller@d000 {
compatible = "marvell,armada-3700-cpu-misc",
"syscon";
reg = <0xd000 0x1000>;
};
spi0: spi@10600 {
compatible = "marvell,armada-3700-spi";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x10600 0xA00>;
clocks = <&nb_periph_clk 7>;
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
num-cs = <4>;
status = "disabled";
};
i2c0: i2c@11000 {
compatible = "marvell,armada-3700-i2c";
reg = <0x11000 0x24>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&nb_periph_clk 10>;
interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
mrvl,i2c-fast-mode;
status = "disabled";
};
i2c1: i2c@11080 {
compatible = "marvell,armada-3700-i2c";
reg = <0x11080 0x24>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&nb_periph_clk 9>;
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
mrvl,i2c-fast-mode;
status = "disabled";
};
avs: avs@11500 {
compatible = "marvell,armada-3700-avs",
"syscon";
reg = <0x11500 0x40>;
};
uart0: serial@12000 {
compatible = "marvell,armada-3700-uart";
reg = <0x12000 0x18>;
clocks = <&xtalclk>;
interrupts =
<GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "uart-sum", "uart-tx", "uart-rx";
status = "disabled";
};
uart1: serial@12200 {
compatible = "marvell,armada-3700-uart-ext";
reg = <0x12200 0x30>;
clocks = <&xtalclk>;
interrupts =
<GIC_SPI 30 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 31 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "uart-tx", "uart-rx";
status = "disabled";
};
nb_periph_clk: nb-periph-clk@13000 {
compatible = "marvell,armada-3700-periph-clock-nb",
"syscon";
reg = <0x13000 0x100>;
clocks = <&tbg 0>, <&tbg 1>, <&tbg 2>,
<&tbg 3>, <&xtalclk>;
#clock-cells = <1>;
};
sb_periph_clk: sb-periph-clk@18000 {
compatible = "marvell,armada-3700-periph-clock-sb";
reg = <0x18000 0x100>;
clocks = <&tbg 0>, <&tbg 1>, <&tbg 2>,
<&tbg 3>, <&xtalclk>;
#clock-cells = <1>;
};
tbg: tbg@13200 {
compatible = "marvell,armada-3700-tbg-clock";
reg = <0x13200 0x100>;
clocks = <&xtalclk>;
#clock-cells = <1>;
};
pinctrl_nb: pinctrl@13800 {
compatible = "marvell,armada3710-nb-pinctrl",
"syscon", "simple-mfd";
reg = <0x13800 0x100>, <0x13C00 0x20>;
/* MPP1[19:0] */
gpionb: gpio {
#gpio-cells = <2>;
gpio-ranges = <&pinctrl_nb 0 0 36>;
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
interrupts =
<GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
};
xtalclk: xtal-clk {
compatible = "marvell,armada-3700-xtal-clock";
clock-output-names = "xtal";
#clock-cells = <0>;
};
spi_quad_pins: spi-quad-pins {
groups = "spi_quad";
function = "spi";
};
spi_cs1_pins: spi-cs1-pins {
groups = "spi_cs1";
function = "spi";
};
i2c1_pins: i2c1-pins {
groups = "i2c1";
function = "i2c";
};
i2c2_pins: i2c2-pins {
groups = "i2c2";
function = "i2c";
};
uart1_pins: uart1-pins {
groups = "uart1";
function = "uart";
};
uart2_pins: uart2-pins {
groups = "uart2";
function = "uart";
};
mmc_pins: mmc-pins {
groups = "emmc_nb";
function = "emmc";
};
};
nb_pm: syscon@14000 {
compatible = "marvell,armada-3700-nb-pm",
"syscon";
reg = <0x14000 0x60>;
};
comphy: phy@18300 {
compatible = "marvell,comphy-a3700";
reg = <0x18300 0x300>,
<0x1F000 0x400>,
<0x5C000 0x400>,
<0xe0178 0x8>;
reg-names = "comphy",
"lane1_pcie_gbe",
"lane0_usb3_gbe",
"lane2_sata_usb3";
#address-cells = <1>;
#size-cells = <0>;
clocks = <&xtalclk>;
clock-names = "xtal";
comphy0: phy@0 {
reg = <0>;
#phy-cells = <1>;
};
comphy1: phy@1 {
reg = <1>;
#phy-cells = <1>;
};
comphy2: phy@2 {
reg = <2>;
#phy-cells = <1>;
};
};
pinctrl_sb: pinctrl@18800 {
compatible = "marvell,armada3710-sb-pinctrl",
"syscon", "simple-mfd";
reg = <0x18800 0x100>, <0x18C00 0x20>;
/* MPP2[23:0] */
gpiosb: gpio {
#gpio-cells = <2>;
gpio-ranges = <&pinctrl_sb 0 0 30>;
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
interrupts =
<GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
};
rgmii_pins: mii-pins {
groups = "rgmii";
function = "mii";
};
smi_pins: smi-pins {
groups = "smi";
function = "smi";
};
sdio_pins: sdio-pins {
groups = "sdio_sb";
function = "sdio";
};
pcie_reset_pins: pcie-reset-pins {
groups = "pcie1"; /* this actually controls "pcie1_reset" */
function = "gpio";
};
pcie_clkreq_pins: pcie-clkreq-pins {
groups = "pcie1_clkreq";
function = "pcie";
};
};
eth0: ethernet@30000 {
compatible = "marvell,armada-3700-neta";
reg = <0x30000 0x4000>;
interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&sb_periph_clk 8>;
status = "disabled";
};
mdio: mdio@32004 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "marvell,orion-mdio";
reg = <0x32004 0x4>;
};
eth1: ethernet@40000 {
compatible = "marvell,armada-3700-neta";
reg = <0x40000 0x4000>;
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&sb_periph_clk 7>;
status = "disabled";
};
usb3: usb@58000 {
compatible = "marvell,armada3700-xhci",
"generic-xhci";
reg = <0x58000 0x4000>;
marvell,usb-misc-reg = <&usb32_syscon>;
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&sb_periph_clk 12>;
phys = <&comphy0 0>, <&usb2_utmi_otg_phy>;
phy-names = "usb3-phy", "usb2-utmi-otg-phy";
status = "disabled";
};
usb2_utmi_otg_phy: phy@5d000 {
compatible = "marvell,a3700-utmi-otg-phy";
reg = <0x5d000 0x800>;
marvell,usb-misc-reg = <&usb32_syscon>;
#phy-cells = <0>;
};
usb32_syscon: system-controller@5d800 {
compatible = "marvell,armada-3700-usb2-host-device-misc",
"syscon";
reg = <0x5d800 0x800>;
};
usb2: usb@5e000 {
compatible = "marvell,armada-3700-ehci";
reg = <0x5e000 0x1000>;
marvell,usb-misc-reg = <&usb2_syscon>;
interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
phys = <&usb2_utmi_host_phy>;
phy-names = "usb2-utmi-host-phy";
status = "disabled";
};
usb2_utmi_host_phy: phy@5f000 {
compatible = "marvell,a3700-utmi-host-phy";
reg = <0x5f000 0x800>;
marvell,usb-misc-reg = <&usb2_syscon>;
#phy-cells = <0>;
};
usb2_syscon: system-controller@5f800 {
compatible = "marvell,armada-3700-usb2-host-misc",
"syscon";
reg = <0x5f800 0x800>;
};
xor@60900 {
compatible = "marvell,armada-3700-xor";
reg = <0x60900 0x100>,
<0x60b00 0x100>;
xor10 {
interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
};
xor11 {
interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
};
};
crypto: crypto@90000 {
compatible = "inside-secure,safexcel-eip97ies";
reg = <0x90000 0x20000>;
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "mem", "ring0", "ring1",
"ring2", "ring3", "eip";
clocks = <&nb_periph_clk 15>;
};
rwtm: mailbox@b0000 {
compatible = "marvell,armada-3700-rwtm-mailbox";
reg = <0xb0000 0x100>;
interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
#mbox-cells = <1>;
};
sdhci1: sdhci@d0000 {
compatible = "marvell,armada-3700-sdhci",
"marvell,sdhci-xenon";
reg = <0xd0000 0x300>,
<0x1e808 0x4>;
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&nb_periph_clk 0>;
clock-names = "core";
status = "disabled";
};
sdhci0: sdhci@d8000 {
compatible = "marvell,armada-3700-sdhci",
"marvell,sdhci-xenon";
reg = <0xd8000 0x300>,
<0x17808 0x4>;
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&nb_periph_clk 0>;
clock-names = "core";
status = "disabled";
};
sata: sata@e0000 {
compatible = "marvell,armada-3700-ahci";
reg = <0xe0000 0x178>;
interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&nb_periph_clk 1>;
phys = <&comphy2 0>;
phy-names = "sata-phy";
status = "disabled";
};
gic: interrupt-controller@1d00000 {
compatible = "arm,gic-v3";
#interrupt-cells = <3>;
interrupt-controller;
reg = <0x1d00000 0x10000>, /* GICD */
<0x1d40000 0x40000>, /* GICR */
<0x1d80000 0x2000>, /* GICC */
<0x1d90000 0x2000>, /* GICH */
<0x1da0000 0x20000>; /* GICV */
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
};
};
pcie0: pcie@d0070000 {
compatible = "marvell,armada-3700-pcie";
device_type = "pci";
status = "disabled";
reg = <0 0xd0070000 0 0x20000>;
#address-cells = <3>;
#size-cells = <2>;
bus-range = <0x00 0xff>;
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <1>;
msi-parent = <&pcie0>;
msi-controller;
/*
* The 128 MiB address range [0xe8000000-0xf0000000] is
* dedicated for PCIe and can be assigned to 8 windows
* with size a power of two. Use one 1 MiB window for
* IO at the end and the remaining seven windows
* (totaling 127 MiB) for MEM.
*/
ranges = <0x82000000 0 0xe8000000 0 0xe8000000 0 0x07f00000 /* Port 0 MEM */
0x81000000 0 0x00000000 0 0xeff00000 0 0x00100000>; /* Port 0 IO */
interrupt-map-mask = <0 0 0 7>;
interrupt-map = <0 0 0 1 &pcie_intc 0>,
<0 0 0 2 &pcie_intc 1>,
<0 0 0 3 &pcie_intc 2>,
<0 0 0 4 &pcie_intc 3>;
max-link-speed = <2>;
phys = <&comphy1 0>;
pcie_intc: interrupt-controller {
interrupt-controller;
#interrupt-cells = <1>;
};
};
};
firmware {
armada-3700-rwtm {
compatible = "marvell,armada-3700-rwtm-firmware";
mboxes = <&rwtm 0>;
status = "okay";
};
};
};