Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-13 06:42:56 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/arch/riscv/cpu/nx25/start.S

293 lines
6.3 KiB
ArmAsm
Raw Normal View History

SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-06 21:58:06 +00:00
/* SPDX-License-Identifier: GPL-2.0+ */
riscv: cpu: Add nx25 to support RISC-V Add Andes nx25 cpu core (called AndesStar V5) to support RISC-V arch Verifications: 1. startup and relocation ok. 2. boot from rom or ram both ok. 2. timer driver ok. 3. uart driver ok 4. mmc driver ok 5. spi driver ok. 6. 32/64 bit both ok. Detail verification message please see doc/README.ae250. Signed-off-by: Rick Chen <rick@andestech.com> Signed-off-by: Rick Chen <rickchen36@gmail.com> Signed-off-by: Greentime Hu <green.hu@gmail.com> Cc: Padmarao Begari <Padmarao.Begari@microsemi.com>
2017-12-26 05:55:48 +00:00
/*
* Startup Code for RISC-V Core
*
* Copyright (c) 2017 Microsemi Corporation.
* Copyright (c) 2017 Padmarao Begari <Padmarao.Begari@microsemi.com>
*
* Copyright (C) 2017 Andes Technology Corporation
* Rick Chen, Andes Technology Corporation <rick@andestech.com>
*/
#include <asm-offsets.h>
#include <config.h>
#include <common.h>
#include <elf.h>
#include <asm/encoding.h>
#ifdef CONFIG_32BIT
#define LREG lw
#define SREG sw
#define REGBYTES 4
#define RELOC_TYPE R_RISCV_32
#define SYM_INDEX 0x8
#define SYM_SIZE 0x10
#else
#define LREG ld
#define SREG sd
#define REGBYTES 8
#define RELOC_TYPE R_RISCV_64
#define SYM_INDEX 0x20
#define SYM_SIZE 0x18
#endif
.section .text
.globl _start
_start:
j handle_reset
nmi_vector:
j nmi_vector
trap_vector:
j trap_entry
.global trap_entry
handle_reset:
riscv: ae250: Support DT provided by the board at runtime Enable CONFIG_OF_BOAD to support delivery dtb to u-boot at run time instead of embedded. There are two methods to delivery dtb. 1 Pass from loader: When u-boot boot from RAM, gdb or loader can pass dtb via a2 to u-boot dynamically. Of course gdb or loader shall be in charge of dtb delivery. 2 Configure CONFIG_SYS_FDT_BASE: It can be configured as RAM or ROM base statically, no mater u-boot boot from RAM or ROM. If it was configured as ROM base, dtb can be burned into ROM(spi flash) by spi driver. Meanwhile remove CONFIG_SKIP_LOWLEVEL_INIT which is useless in nx25-ae250 configuration. Signed-off-by: Rick Chen <rick@andestech.com> Signed-off-by: Rick Chen <rickchen36@gmail.com> Cc: Greentime Hu <green.hu@gmail.com>
2018-03-29 02:08:33 +00:00
li t0, CONFIG_SYS_SDRAM_BASE
SREG a2, 0(t0)
riscv: cpu: Add nx25 to support RISC-V Add Andes nx25 cpu core (called AndesStar V5) to support RISC-V arch Verifications: 1. startup and relocation ok. 2. boot from rom or ram both ok. 2. timer driver ok. 3. uart driver ok 4. mmc driver ok 5. spi driver ok. 6. 32/64 bit both ok. Detail verification message please see doc/README.ae250. Signed-off-by: Rick Chen <rick@andestech.com> Signed-off-by: Rick Chen <rickchen36@gmail.com> Signed-off-by: Greentime Hu <green.hu@gmail.com> Cc: Padmarao Begari <Padmarao.Begari@microsemi.com>
2017-12-26 05:55:48 +00:00
la t0, trap_entry
csrw mtvec, t0
csrwi mstatus, 0
csrwi mie, 0
/*
* Do CPU critical regs init only at reboot,
* not when booting from ram
*/
#ifdef CONFIG_INIT_CRITICAL
jal cpu_init_crit /* Do CPU critical regs init */
#endif
/*
* Set stackpointer in internal/ex RAM to call board_init_f
*/
call_board_init_f:
li t0, -16
li t1, CONFIG_SYS_INIT_SP_ADDR
and sp, t1, t0 /* force 16 byte alignment */
#ifdef CONFIG_DEBUG_UART
jal debug_uart_init
#endif
call_board_init_f_0:
mv a0, sp
jal board_init_f_alloc_reserve
mv sp, a0
jal board_init_f_init_reserve
mv a0, zero /* a0 <-- boot_flags = 0 */
la t5, board_init_f
jr t5 /* jump to board_init_f() */
/*
* void relocate_code (addr_sp, gd, addr_moni)
*
* This "function" does not return, instead it continues in RAM
* after relocating the monitor code.
*
*/
.globl relocate_code
relocate_code:
mv s2, a0 /* save addr_sp */
mv s3, a1 /* save addr of gd */
mv s4, a2 /* save addr of destination */
/*
*Set up the stack
*/
stack_setup:
mv sp, s2
la t0, _start
sub t6, s4, t0 /* t6 <- relocation offset */
beq t0, s4, clear_bss /* skip relocation */
mv t1, s4 /* t1 <- scratch for copy_loop */
la t3, __bss_start
sub t3, t3, t0 /* t3 <- __bss_start_ofs */
add t2, t0, t3 /* t2 <- source end address */
copy_loop:
LREG t5, 0(t0)
addi t0, t0, REGBYTES
SREG t5, 0(t1)
addi t1, t1, REGBYTES
blt t0, t2, copy_loop
/*
* Update dynamic relocations after board_init_f
*/
fix_rela_dyn:
la t1, __rel_dyn_start
la t2, __rel_dyn_end
beq t1, t2, clear_bss
add t1, t1, t6 /* t1 <- rela_dyn_start in RAM */
add t2, t2, t6 /* t2 <- rela_dyn_end in RAM */
/*
* skip first reserved entry: address, type, addend
*/
bne t1, t2, 7f
6:
LREG t5, -(REGBYTES*2)(t1) /* t5 <-- relocation info:type */
li t3, R_RISCV_RELATIVE /* reloc type R_RISCV_RELATIVE */
bne t5, t3, 8f /* skip non-RISCV_RELOC entries */
LREG t3, -(REGBYTES*3)(t1)
LREG t5, -(REGBYTES)(t1) /* t5 <-- addend */
add t5, t5, t6 /* t5 <-- location to fix up in RAM */
add t3, t3, t6 /* t3 <-- location to fix up in RAM */
SREG t5, 0(t3)
7:
addi t1, t1, (REGBYTES*3)
ble t1, t2, 6b
8:
la t4, __dyn_sym_start
add t4, t4, t6
9:
LREG t5, -(REGBYTES*2)(t1) /* t5 <-- relocation info:type */
srli t0, t5, SYM_INDEX /* t0 <--- sym table index */
andi t5, t5, 0xFF /* t5 <--- relocation type */
li t3, RELOC_TYPE
bne t5, t3, 10f /* skip non-addned entries */
LREG t3, -(REGBYTES*3)(t1)
li t5, SYM_SIZE
mul t0, t0, t5
add s1, t4, t0
LREG t5, REGBYTES(s1)
add t5, t5, t6 /* t5 <-- location to fix up in RAM */
add t3, t3, t6 /* t3 <-- location to fix up in RAM */
SREG t5, 0(t3)
10:
addi t1, t1, (REGBYTES*3)
ble t1, t2, 9b
/*
* trap update
*/
la t0, trap_entry
add t0, t0, t6
csrw mtvec, t0
clear_bss:
la t0, __bss_start /* t0 <- rel __bss_start in FLASH */
add t0, t0, t6 /* t0 <- rel __bss_start in RAM */
la t1, __bss_end /* t1 <- rel __bss_end in FLASH */
add t1, t1, t6 /* t1 <- rel __bss_end in RAM */
li t2, 0x00000000 /* clear */
beq t0, t1, call_board_init_r
clbss_l:
SREG t2, 0(t0) /* clear loop... */
addi t0, t0, REGBYTES
bne t0, t1, clbss_l
/*
* We are done. Do not return, instead branch to second part of board
* initialization, now running from RAM.
*/
call_board_init_r:
la t0, board_init_r
mv t4, t0 /* offset of board_init_r() */
add t4, t4, t6 /* real address of board_init_r() */
/*
* setup parameters for board_init_r
*/
mv a0, s3 /* gd_t */
mv a1, s4 /* dest_addr */
/*
* jump to it ...
*/
jr t4 /* jump to board_init_r() */
/*
* trap entry
*/
trap_entry:
addi sp, sp, -32*REGBYTES
SREG x1, 1*REGBYTES(sp)
SREG x2, 2*REGBYTES(sp)
SREG x3, 3*REGBYTES(sp)
SREG x4, 4*REGBYTES(sp)
SREG x5, 5*REGBYTES(sp)
SREG x6, 6*REGBYTES(sp)
SREG x7, 7*REGBYTES(sp)
SREG x8, 8*REGBYTES(sp)
SREG x9, 9*REGBYTES(sp)
SREG x10, 10*REGBYTES(sp)
SREG x11, 11*REGBYTES(sp)
SREG x12, 12*REGBYTES(sp)
SREG x13, 13*REGBYTES(sp)
SREG x14, 14*REGBYTES(sp)
SREG x15, 15*REGBYTES(sp)
SREG x16, 16*REGBYTES(sp)
SREG x17, 17*REGBYTES(sp)
SREG x18, 18*REGBYTES(sp)
SREG x19, 19*REGBYTES(sp)
SREG x20, 20*REGBYTES(sp)
SREG x21, 21*REGBYTES(sp)
SREG x22, 22*REGBYTES(sp)
SREG x23, 23*REGBYTES(sp)
SREG x24, 24*REGBYTES(sp)
SREG x25, 25*REGBYTES(sp)
SREG x26, 26*REGBYTES(sp)
SREG x27, 27*REGBYTES(sp)
SREG x28, 28*REGBYTES(sp)
SREG x29, 29*REGBYTES(sp)
SREG x30, 30*REGBYTES(sp)
SREG x31, 31*REGBYTES(sp)
csrr a0, mcause
csrr a1, mepc
mv a2, sp
jal handle_trap
csrw mepc, a0
/*
* Remain in M-mode after mret
*/
li t0, MSTATUS_MPP
csrs mstatus, t0
LREG x1, 1*REGBYTES(sp)
LREG x2, 2*REGBYTES(sp)
LREG x3, 3*REGBYTES(sp)
LREG x4, 4*REGBYTES(sp)
LREG x5, 5*REGBYTES(sp)
LREG x6, 6*REGBYTES(sp)
LREG x7, 7*REGBYTES(sp)
LREG x8, 8*REGBYTES(sp)
LREG x9, 9*REGBYTES(sp)
LREG x10, 10*REGBYTES(sp)
LREG x11, 11*REGBYTES(sp)
LREG x12, 12*REGBYTES(sp)
LREG x13, 13*REGBYTES(sp)
LREG x14, 14*REGBYTES(sp)
LREG x15, 15*REGBYTES(sp)
LREG x16, 16*REGBYTES(sp)
LREG x17, 17*REGBYTES(sp)
LREG x18, 18*REGBYTES(sp)
LREG x19, 19*REGBYTES(sp)
LREG x20, 20*REGBYTES(sp)
LREG x21, 21*REGBYTES(sp)
LREG x22, 22*REGBYTES(sp)
LREG x23, 23*REGBYTES(sp)
LREG x24, 24*REGBYTES(sp)
LREG x25, 25*REGBYTES(sp)
LREG x26, 26*REGBYTES(sp)
LREG x27, 27*REGBYTES(sp)
LREG x28, 28*REGBYTES(sp)
LREG x29, 29*REGBYTES(sp)
LREG x30, 30*REGBYTES(sp)
LREG x31, 31*REGBYTES(sp)
addi sp, sp, 32*REGBYTES
mret
#ifdef CONFIG_INIT_CRITICAL
cpu_init_crit:
ret
#endif
Reference in a new issue Copy permalink