mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-14 08:57:58 +00:00
381 lines
12 KiB
C
381 lines
12 KiB
C
|
// SPDX-License-Identifier: GPL-2.0
|
||
|
/*
|
||
|
* Copyright (C) 2016-2018 Intel Corporation <www.intel.com>
|
||
|
*
|
||
|
*/
|
||
|
|
||
|
#include <common.h>
|
||
|
#include <asm/io.h>
|
||
|
#include <asm/arch/clock_manager.h>
|
||
|
#include <asm/arch/handoff_s10.h>
|
||
|
#include <asm/arch/system_manager.h>
|
||
|
|
||
|
DECLARE_GLOBAL_DATA_PTR;
|
||
|
|
||
|
static const struct socfpga_clock_manager *clock_manager_base =
|
||
|
(struct socfpga_clock_manager *)SOCFPGA_CLKMGR_ADDRESS;
|
||
|
static const struct socfpga_system_manager *sysmgr_regs =
|
||
|
(struct socfpga_system_manager *)SOCFPGA_SYSMGR_ADDRESS;
|
||
|
|
||
|
/*
|
||
|
* function to write the bypass register which requires a poll of the
|
||
|
* busy bit
|
||
|
*/
|
||
|
static void cm_write_bypass_mainpll(u32 val)
|
||
|
{
|
||
|
writel(val, &clock_manager_base->main_pll.bypass);
|
||
|
cm_wait_for_fsm();
|
||
|
}
|
||
|
|
||
|
static void cm_write_bypass_perpll(u32 val)
|
||
|
{
|
||
|
writel(val, &clock_manager_base->per_pll.bypass);
|
||
|
cm_wait_for_fsm();
|
||
|
}
|
||
|
|
||
|
/* function to write the ctrl register which requires a poll of the busy bit */
|
||
|
static void cm_write_ctrl(u32 val)
|
||
|
{
|
||
|
writel(val, &clock_manager_base->ctrl);
|
||
|
cm_wait_for_fsm();
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* Setup clocks while making no assumptions about previous state of the clocks.
|
||
|
*/
|
||
|
void cm_basic_init(const struct cm_config * const cfg)
|
||
|
{
|
||
|
u32 mdiv, refclkdiv, mscnt, hscnt, vcocalib;
|
||
|
|
||
|
if (cfg == 0)
|
||
|
return;
|
||
|
|
||
|
/* Put all plls in bypass */
|
||
|
cm_write_bypass_mainpll(CLKMGR_BYPASS_MAINPLL_ALL);
|
||
|
cm_write_bypass_perpll(CLKMGR_BYPASS_PERPLL_ALL);
|
||
|
|
||
|
/* setup main PLL dividers where calculate the vcocalib value */
|
||
|
mdiv = (cfg->main_pll_fdbck >> CLKMGR_FDBCK_MDIV_OFFSET) &
|
||
|
CLKMGR_FDBCK_MDIV_MASK;
|
||
|
refclkdiv = (cfg->main_pll_pllglob >> CLKMGR_PLLGLOB_REFCLKDIV_OFFSET) &
|
||
|
CLKMGR_PLLGLOB_REFCLKDIV_MASK;
|
||
|
mscnt = CLKMGR_MSCNT_CONST / (CLKMGR_MDIV_CONST + mdiv) / refclkdiv;
|
||
|
hscnt = (mdiv + CLKMGR_MDIV_CONST) * mscnt / refclkdiv -
|
||
|
CLKMGR_HSCNT_CONST;
|
||
|
vcocalib = (hscnt & CLKMGR_VCOCALIB_HSCNT_MASK) |
|
||
|
((mscnt & CLKMGR_VCOCALIB_MSCNT_MASK) <<
|
||
|
CLKMGR_VCOCALIB_MSCNT_OFFSET);
|
||
|
|
||
|
writel((cfg->main_pll_pllglob & ~CLKMGR_PLLGLOB_PD_MASK &
|
||
|
~CLKMGR_PLLGLOB_RST_MASK),
|
||
|
&clock_manager_base->main_pll.pllglob);
|
||
|
writel(cfg->main_pll_fdbck, &clock_manager_base->main_pll.fdbck);
|
||
|
writel(vcocalib, &clock_manager_base->main_pll.vcocalib);
|
||
|
writel(cfg->main_pll_pllc0, &clock_manager_base->main_pll.pllc0);
|
||
|
writel(cfg->main_pll_pllc1, &clock_manager_base->main_pll.pllc1);
|
||
|
writel(cfg->main_pll_nocdiv, &clock_manager_base->main_pll.nocdiv);
|
||
|
|
||
|
/* setup peripheral PLL dividers */
|
||
|
/* calculate the vcocalib value */
|
||
|
mdiv = (cfg->per_pll_fdbck >> CLKMGR_FDBCK_MDIV_OFFSET) &
|
||
|
CLKMGR_FDBCK_MDIV_MASK;
|
||
|
refclkdiv = (cfg->per_pll_pllglob >> CLKMGR_PLLGLOB_REFCLKDIV_OFFSET) &
|
||
|
CLKMGR_PLLGLOB_REFCLKDIV_MASK;
|
||
|
mscnt = CLKMGR_MSCNT_CONST / (CLKMGR_MDIV_CONST + mdiv) / refclkdiv;
|
||
|
hscnt = (mdiv + CLKMGR_MDIV_CONST) * mscnt / refclkdiv -
|
||
|
CLKMGR_HSCNT_CONST;
|
||
|
vcocalib = (hscnt & CLKMGR_VCOCALIB_HSCNT_MASK) |
|
||
|
((mscnt & CLKMGR_VCOCALIB_MSCNT_MASK) <<
|
||
|
CLKMGR_VCOCALIB_MSCNT_OFFSET);
|
||
|
|
||
|
writel((cfg->per_pll_pllglob & ~CLKMGR_PLLGLOB_PD_MASK &
|
||
|
~CLKMGR_PLLGLOB_RST_MASK),
|
||
|
&clock_manager_base->per_pll.pllglob);
|
||
|
writel(cfg->per_pll_fdbck, &clock_manager_base->per_pll.fdbck);
|
||
|
writel(vcocalib, &clock_manager_base->per_pll.vcocalib);
|
||
|
writel(cfg->per_pll_pllc0, &clock_manager_base->per_pll.pllc0);
|
||
|
writel(cfg->per_pll_pllc1, &clock_manager_base->per_pll.pllc1);
|
||
|
writel(cfg->per_pll_emacctl, &clock_manager_base->per_pll.emacctl);
|
||
|
writel(cfg->per_pll_gpiodiv, &clock_manager_base->per_pll.gpiodiv);
|
||
|
|
||
|
/* Take both PLL out of reset and power up */
|
||
|
setbits_le32(&clock_manager_base->main_pll.pllglob,
|
||
|
CLKMGR_PLLGLOB_PD_MASK | CLKMGR_PLLGLOB_RST_MASK);
|
||
|
setbits_le32(&clock_manager_base->per_pll.pllglob,
|
||
|
CLKMGR_PLLGLOB_PD_MASK | CLKMGR_PLLGLOB_RST_MASK);
|
||
|
|
||
|
#define LOCKED_MASK \
|
||
|
(CLKMGR_STAT_MAINPLL_LOCKED | \
|
||
|
CLKMGR_STAT_PERPLL_LOCKED)
|
||
|
|
||
|
cm_wait_for_lock(LOCKED_MASK);
|
||
|
|
||
|
/*
|
||
|
* Dividers for C2 to C9 only init after PLLs are lock. As dividers
|
||
|
* only take effect upon value change, we shall set a maximum value as
|
||
|
* default value.
|
||
|
*/
|
||
|
writel(0xff, &clock_manager_base->main_pll.mpuclk);
|
||
|
writel(0xff, &clock_manager_base->main_pll.nocclk);
|
||
|
writel(0xff, &clock_manager_base->main_pll.cntr2clk);
|
||
|
writel(0xff, &clock_manager_base->main_pll.cntr3clk);
|
||
|
writel(0xff, &clock_manager_base->main_pll.cntr4clk);
|
||
|
writel(0xff, &clock_manager_base->main_pll.cntr5clk);
|
||
|
writel(0xff, &clock_manager_base->main_pll.cntr6clk);
|
||
|
writel(0xff, &clock_manager_base->main_pll.cntr7clk);
|
||
|
writel(0xff, &clock_manager_base->main_pll.cntr8clk);
|
||
|
writel(0xff, &clock_manager_base->main_pll.cntr9clk);
|
||
|
writel(0xff, &clock_manager_base->per_pll.cntr2clk);
|
||
|
writel(0xff, &clock_manager_base->per_pll.cntr3clk);
|
||
|
writel(0xff, &clock_manager_base->per_pll.cntr4clk);
|
||
|
writel(0xff, &clock_manager_base->per_pll.cntr5clk);
|
||
|
writel(0xff, &clock_manager_base->per_pll.cntr6clk);
|
||
|
writel(0xff, &clock_manager_base->per_pll.cntr7clk);
|
||
|
writel(0xff, &clock_manager_base->per_pll.cntr8clk);
|
||
|
writel(0xff, &clock_manager_base->per_pll.cntr9clk);
|
||
|
|
||
|
writel(cfg->main_pll_mpuclk, &clock_manager_base->main_pll.mpuclk);
|
||
|
writel(cfg->main_pll_nocclk, &clock_manager_base->main_pll.nocclk);
|
||
|
writel(cfg->main_pll_cntr2clk, &clock_manager_base->main_pll.cntr2clk);
|
||
|
writel(cfg->main_pll_cntr3clk, &clock_manager_base->main_pll.cntr3clk);
|
||
|
writel(cfg->main_pll_cntr4clk, &clock_manager_base->main_pll.cntr4clk);
|
||
|
writel(cfg->main_pll_cntr5clk, &clock_manager_base->main_pll.cntr5clk);
|
||
|
writel(cfg->main_pll_cntr6clk, &clock_manager_base->main_pll.cntr6clk);
|
||
|
writel(cfg->main_pll_cntr7clk, &clock_manager_base->main_pll.cntr7clk);
|
||
|
writel(cfg->main_pll_cntr8clk, &clock_manager_base->main_pll.cntr8clk);
|
||
|
writel(cfg->main_pll_cntr9clk, &clock_manager_base->main_pll.cntr9clk);
|
||
|
writel(cfg->per_pll_cntr2clk, &clock_manager_base->per_pll.cntr2clk);
|
||
|
writel(cfg->per_pll_cntr3clk, &clock_manager_base->per_pll.cntr3clk);
|
||
|
writel(cfg->per_pll_cntr4clk, &clock_manager_base->per_pll.cntr4clk);
|
||
|
writel(cfg->per_pll_cntr5clk, &clock_manager_base->per_pll.cntr5clk);
|
||
|
writel(cfg->per_pll_cntr6clk, &clock_manager_base->per_pll.cntr6clk);
|
||
|
writel(cfg->per_pll_cntr7clk, &clock_manager_base->per_pll.cntr7clk);
|
||
|
writel(cfg->per_pll_cntr8clk, &clock_manager_base->per_pll.cntr8clk);
|
||
|
writel(cfg->per_pll_cntr9clk, &clock_manager_base->per_pll.cntr9clk);
|
||
|
|
||
|
/* Take all PLLs out of bypass */
|
||
|
cm_write_bypass_mainpll(0);
|
||
|
cm_write_bypass_perpll(0);
|
||
|
|
||
|
/* clear safe mode / out of boot mode */
|
||
|
cm_write_ctrl(readl(&clock_manager_base->ctrl)
|
||
|
& ~(CLKMGR_CTRL_SAFEMODE));
|
||
|
|
||
|
/* Now ungate non-hw-managed clocks */
|
||
|
writel(~0, &clock_manager_base->main_pll.en);
|
||
|
writel(~0, &clock_manager_base->per_pll.en);
|
||
|
|
||
|
/* Clear the loss of lock bits (write 1 to clear) */
|
||
|
writel(CLKMGR_INTER_PERPLLLOST_MASK | CLKMGR_INTER_MAINPLLLOST_MASK,
|
||
|
&clock_manager_base->intrclr);
|
||
|
}
|
||
|
|
||
|
static unsigned long cm_get_main_vco_clk_hz(void)
|
||
|
{
|
||
|
unsigned long fref, refdiv, mdiv, reg, vco;
|
||
|
|
||
|
reg = readl(&clock_manager_base->main_pll.pllglob);
|
||
|
|
||
|
fref = (reg >> CLKMGR_PLLGLOB_VCO_PSRC_OFFSET) &
|
||
|
CLKMGR_PLLGLOB_VCO_PSRC_MASK;
|
||
|
switch (fref) {
|
||
|
case CLKMGR_VCO_PSRC_EOSC1:
|
||
|
fref = cm_get_osc_clk_hz();
|
||
|
break;
|
||
|
case CLKMGR_VCO_PSRC_INTOSC:
|
||
|
fref = cm_get_intosc_clk_hz();
|
||
|
break;
|
||
|
case CLKMGR_VCO_PSRC_F2S:
|
||
|
fref = cm_get_fpga_clk_hz();
|
||
|
break;
|
||
|
}
|
||
|
|
||
|
refdiv = (reg >> CLKMGR_PLLGLOB_REFCLKDIV_OFFSET) &
|
||
|
CLKMGR_PLLGLOB_REFCLKDIV_MASK;
|
||
|
|
||
|
reg = readl(&clock_manager_base->main_pll.fdbck);
|
||
|
mdiv = (reg >> CLKMGR_FDBCK_MDIV_OFFSET) & CLKMGR_FDBCK_MDIV_MASK;
|
||
|
|
||
|
vco = fref / refdiv;
|
||
|
vco = vco * (CLKMGR_MDIV_CONST + mdiv);
|
||
|
return vco;
|
||
|
}
|
||
|
|
||
|
static unsigned long cm_get_per_vco_clk_hz(void)
|
||
|
{
|
||
|
unsigned long fref, refdiv, mdiv, reg, vco;
|
||
|
|
||
|
reg = readl(&clock_manager_base->per_pll.pllglob);
|
||
|
|
||
|
fref = (reg >> CLKMGR_PLLGLOB_VCO_PSRC_OFFSET) &
|
||
|
CLKMGR_PLLGLOB_VCO_PSRC_MASK;
|
||
|
switch (fref) {
|
||
|
case CLKMGR_VCO_PSRC_EOSC1:
|
||
|
fref = cm_get_osc_clk_hz();
|
||
|
break;
|
||
|
case CLKMGR_VCO_PSRC_INTOSC:
|
||
|
fref = cm_get_intosc_clk_hz();
|
||
|
break;
|
||
|
case CLKMGR_VCO_PSRC_F2S:
|
||
|
fref = cm_get_fpga_clk_hz();
|
||
|
break;
|
||
|
}
|
||
|
|
||
|
refdiv = (reg >> CLKMGR_PLLGLOB_REFCLKDIV_OFFSET) &
|
||
|
CLKMGR_PLLGLOB_REFCLKDIV_MASK;
|
||
|
|
||
|
reg = readl(&clock_manager_base->per_pll.fdbck);
|
||
|
mdiv = (reg >> CLKMGR_FDBCK_MDIV_OFFSET) & CLKMGR_FDBCK_MDIV_MASK;
|
||
|
|
||
|
vco = fref / refdiv;
|
||
|
vco = vco * (CLKMGR_MDIV_CONST + mdiv);
|
||
|
return vco;
|
||
|
}
|
||
|
|
||
|
unsigned long cm_get_mpu_clk_hz(void)
|
||
|
{
|
||
|
unsigned long clock = readl(&clock_manager_base->main_pll.mpuclk);
|
||
|
|
||
|
clock = (clock >> CLKMGR_CLKSRC_OFFSET) & CLKMGR_CLKSRC_MASK;
|
||
|
|
||
|
switch (clock) {
|
||
|
case CLKMGR_CLKSRC_MAIN:
|
||
|
clock = cm_get_main_vco_clk_hz();
|
||
|
clock /= (readl(&clock_manager_base->main_pll.pllc0) &
|
||
|
CLKMGR_PLLC0_DIV_MASK);
|
||
|
break;
|
||
|
|
||
|
case CLKMGR_CLKSRC_PER:
|
||
|
clock = cm_get_per_vco_clk_hz();
|
||
|
clock /= (readl(&clock_manager_base->per_pll.pllc0) &
|
||
|
CLKMGR_CLKCNT_MSK);
|
||
|
break;
|
||
|
|
||
|
case CLKMGR_CLKSRC_OSC1:
|
||
|
clock = cm_get_osc_clk_hz();
|
||
|
break;
|
||
|
|
||
|
case CLKMGR_CLKSRC_INTOSC:
|
||
|
clock = cm_get_intosc_clk_hz();
|
||
|
break;
|
||
|
|
||
|
case CLKMGR_CLKSRC_FPGA:
|
||
|
clock = cm_get_fpga_clk_hz();
|
||
|
break;
|
||
|
}
|
||
|
|
||
|
clock /= 1 + (readl(&clock_manager_base->main_pll.mpuclk) &
|
||
|
CLKMGR_CLKCNT_MSK);
|
||
|
return clock;
|
||
|
}
|
||
|
|
||
|
unsigned int cm_get_l3_main_clk_hz(void)
|
||
|
{
|
||
|
u32 clock = readl(&clock_manager_base->main_pll.nocclk);
|
||
|
|
||
|
clock = (clock >> CLKMGR_CLKSRC_OFFSET) & CLKMGR_CLKSRC_MASK;
|
||
|
|
||
|
switch (clock) {
|
||
|
case CLKMGR_CLKSRC_MAIN:
|
||
|
clock = cm_get_main_vco_clk_hz();
|
||
|
clock /= (readl(&clock_manager_base->main_pll.pllc1) &
|
||
|
CLKMGR_PLLC0_DIV_MASK);
|
||
|
break;
|
||
|
|
||
|
case CLKMGR_CLKSRC_PER:
|
||
|
clock = cm_get_per_vco_clk_hz();
|
||
|
clock /= (readl(&clock_manager_base->per_pll.pllc1) &
|
||
|
CLKMGR_CLKCNT_MSK);
|
||
|
break;
|
||
|
|
||
|
case CLKMGR_CLKSRC_OSC1:
|
||
|
clock = cm_get_osc_clk_hz();
|
||
|
break;
|
||
|
|
||
|
case CLKMGR_CLKSRC_INTOSC:
|
||
|
clock = cm_get_intosc_clk_hz();
|
||
|
break;
|
||
|
|
||
|
case CLKMGR_CLKSRC_FPGA:
|
||
|
clock = cm_get_fpga_clk_hz();
|
||
|
break;
|
||
|
}
|
||
|
|
||
|
clock /= 1 + (readl(&clock_manager_base->main_pll.nocclk) &
|
||
|
CLKMGR_CLKCNT_MSK);
|
||
|
return clock;
|
||
|
}
|
||
|
|
||
|
unsigned int cm_get_mmc_controller_clk_hz(void)
|
||
|
{
|
||
|
u32 clock = readl(&clock_manager_base->per_pll.cntr6clk);
|
||
|
|
||
|
clock = (clock >> CLKMGR_CLKSRC_OFFSET) & CLKMGR_CLKSRC_MASK;
|
||
|
|
||
|
switch (clock) {
|
||
|
case CLKMGR_CLKSRC_MAIN:
|
||
|
clock = cm_get_l3_main_clk_hz();
|
||
|
clock /= 1 + (readl(&clock_manager_base->main_pll.cntr6clk) &
|
||
|
CLKMGR_CLKCNT_MSK);
|
||
|
break;
|
||
|
|
||
|
case CLKMGR_CLKSRC_PER:
|
||
|
clock = cm_get_l3_main_clk_hz();
|
||
|
clock /= 1 + (readl(&clock_manager_base->per_pll.cntr6clk) &
|
||
|
CLKMGR_CLKCNT_MSK);
|
||
|
break;
|
||
|
|
||
|
case CLKMGR_CLKSRC_OSC1:
|
||
|
clock = cm_get_osc_clk_hz();
|
||
|
break;
|
||
|
|
||
|
case CLKMGR_CLKSRC_INTOSC:
|
||
|
clock = cm_get_intosc_clk_hz();
|
||
|
break;
|
||
|
|
||
|
case CLKMGR_CLKSRC_FPGA:
|
||
|
clock = cm_get_fpga_clk_hz();
|
||
|
break;
|
||
|
}
|
||
|
return clock / 4;
|
||
|
}
|
||
|
|
||
|
unsigned int cm_get_l4_sp_clk_hz(void)
|
||
|
{
|
||
|
u32 clock = cm_get_l3_main_clk_hz();
|
||
|
|
||
|
clock /= (1 << ((readl(&clock_manager_base->main_pll.nocdiv) >>
|
||
|
CLKMGR_NOCDIV_L4SPCLK_OFFSET) & CLKMGR_CLKCNT_MSK));
|
||
|
return clock;
|
||
|
}
|
||
|
|
||
|
unsigned int cm_get_qspi_controller_clk_hz(void)
|
||
|
{
|
||
|
return readl(&sysmgr_regs->boot_scratch_cold0);
|
||
|
}
|
||
|
|
||
|
unsigned int cm_get_spi_controller_clk_hz(void)
|
||
|
{
|
||
|
u32 clock = cm_get_l3_main_clk_hz();
|
||
|
|
||
|
clock /= (1 << ((readl(&clock_manager_base->main_pll.nocdiv) >>
|
||
|
CLKMGR_NOCDIV_L4MAIN_OFFSET) & CLKMGR_CLKCNT_MSK));
|
||
|
return clock;
|
||
|
}
|
||
|
|
||
|
unsigned int cm_get_l4_sys_free_clk_hz(void)
|
||
|
{
|
||
|
return cm_get_l3_main_clk_hz() / 4;
|
||
|
}
|
||
|
|
||
|
void cm_print_clock_quick_summary(void)
|
||
|
{
|
||
|
printf("MPU %d kHz\n", (u32)(cm_get_mpu_clk_hz() / 1000));
|
||
|
printf("L3 main %d kHz\n", cm_get_l3_main_clk_hz() / 1000);
|
||
|
printf("Main VCO %d kHz\n", (u32)(cm_get_main_vco_clk_hz() / 1000));
|
||
|
printf("Per VCO %d kHz\n", (u32)(cm_get_per_vco_clk_hz() / 1000));
|
||
|
printf("EOSC1 %d kHz\n", cm_get_osc_clk_hz() / 1000);
|
||
|
printf("HPS MMC %d kHz\n", cm_get_mmc_controller_clk_hz() / 1000);
|
||
|
printf("UART %d kHz\n", cm_get_l4_sp_clk_hz() / 1000);
|
||
|
}
|