u-boot/arch/sh/include/asm/cpu_sh2.h

/* SPDX-License-Identifier: GPL-2.0+ */
/*
 * Copyright (C) 2007,2008 Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
 * Copyright (C) 2008 Renesas Solutions Corp.
 */

#ifndef _ASM_CPU_SH2_H_
#define _ASM_CPU_SH2_H_

/* cache control */
#define CCR_CACHE_STOP		0x00000008
#define CCR_CACHE_ENABLE	0x00000005
#define CCR_CACHE_ICI		0x00000008

#define CACHE_OC_ADDRESS_ARRAY	0xf0000000
#define CACHE_OC_WAY_SHIFT	13
#define CACHE_OC_NUM_ENTRIES	256
#define CACHE_OC_ENTRY_SHIFT	4

#if defined(CONFIG_CPU_SH7203)
# include <asm/cpu_sh7203.h>
#elif defined(CONFIG_CPU_SH7264)
# include <asm/cpu_sh7264.h>
#elif defined(CONFIG_CPU_SH7269)
# include <asm/cpu_sh7269.h>
#else
# error "Unknown SH2 variant"
#endif

#endif	/* _ASM_CPU_SH2_H_ */
SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com> 2018-05-06 21:58:06 +00:00			`/* SPDX-License-Identifier: GPL-2.0+ */`
sh: Add support SH2/SH2A which is CPU of Renesas Technology Add support SH2/SH2A basic function. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> 2008-08-31 13:48:33 +00:00			`/*`
			`* Copyright (C) 2007,2008 Nobuhiro Iwamatsu <iwamatsu@nigauri.org>`
			`* Copyright (C) 2008 Renesas Solutions Corp.`
			`*/`

			`#ifndef _ASM_CPU_SH2_H_`
			`#define _ASM_CPU_SH2_H_`

			`/* cache control */`
			`#define CCR_CACHE_STOP 0x00000008`
			`#define CCR_CACHE_ENABLE 0x00000005`
			`#define CCR_CACHE_ICI 0x00000008`

			`#define CACHE_OC_ADDRESS_ARRAY 0xf0000000`
			`#define CACHE_OC_WAY_SHIFT 13`
			`#define CACHE_OC_NUM_ENTRIES 256`
			`#define CACHE_OC_ENTRY_SHIFT 4`

			`#if defined(CONFIG_CPU_SH7203)`
			`# include <asm/cpu_sh7203.h>`
sh: Add Renesas rsk7264 board The rsk7264 (also know as rsk2+sh7264) is an SH2A based board with 64MB NAND flash and 64MB SDRAM. It is very similar to the rsk7203 board. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> 2011-06-01 06:35:13 +00:00			`#elif defined(CONFIG_CPU_SH7264)`
			`# include <asm/cpu_sh7264.h>`
sh: Add SH7269 device and RSK2+SH7269 board This is an sh2a device (max 266MHz) with FPU, video display controller (VDC), 8 serial ports, 4 I2C channels, 3 CAN ports, SD and on-chip USB. The RSK2+SH7269 board uses the SH7269 processor. It is often referred to as just rsk7269. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> 2012-05-15 22:15:51 +00:00			`#elif defined(CONFIG_CPU_SH7269)`
			`# include <asm/cpu_sh7269.h>`
sh: Add support SH2/SH2A which is CPU of Renesas Technology Add support SH2/SH2A basic function. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> 2008-08-31 13:48:33 +00:00			`#else`
			`# error "Unknown SH2 variant"`
			`#endif`

			`#endif /* _ASM_CPU_SH2_H_ */`