u-boot/doc/uImage.FIT/update_uboot.its

/*
 * Automatic software update for U-Boot
 * Make sure the flashing addresses ('load' prop) is correct for your board!
 */

/dts-v1/;

/ {
	description = "Automatic U-Boot update";
	#address-cells = <1>;

	images {
		update@1 {
			description = "U-Boot binary";
			data = /incbin/("./u-boot.bin");
			compression = "none";
			type = "firmware";
			load = <FFFC0000>;
			hash@1 {
				algo = "sha1";
			};
		};
	};
};
Automatic software update from TFTP server The auto-update feature allows to automatically download software updates from a TFTP server and store them in Flash memory during boot. Updates are contained in a FIT file and protected with SHA-1 checksum. More detailed description can be found in doc/README.update. Signed-off-by: Rafal Czubak <rcz@semihalf.com> Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> 2008-10-01 13:26:31 +00:00			`/*`
			`* Automatic software update for U-Boot`
			`* Make sure the flashing addresses ('load' prop) is correct for your board!`
			`*/`
Fix example FIT image source files The example FIT image source files do not compile with the latest dtc and mkimage. The following error message is produced: DTC: dts->dtb on file "kernel.its" Error: kernel.its 7:0 - 1:0 syntax error FATAL ERROR: Unable to parse input tree ./mkimage: Can't read kernel.itb.tmp: Invalid argument The FIT image source files are missing the "/dts-v1/;" directive at the beginning of the file. Add the directive to the examples. Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> 2009-11-04 21:37:59 +00:00
			`/dts-v1/;`

Automatic software update from TFTP server The auto-update feature allows to automatically download software updates from a TFTP server and store them in Flash memory during boot. Updates are contained in a FIT file and protected with SHA-1 checksum. More detailed description can be found in doc/README.update. Signed-off-by: Rafal Czubak <rcz@semihalf.com> Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> 2008-10-01 13:26:31 +00:00			`/ {`
			`description = "Automatic U-Boot update";`
			`#address-cells = <1>;`

			`images {`
			`update@1 {`
			`description = "U-Boot binary";`
			`data = /incbin/("./u-boot.bin");`
			`compression = "none";`
			`type = "firmware";`
			`load = <FFFC0000>;`
			`hash@1 {`
			`algo = "sha1";`
			`};`
			`};`
			`};`
			`};`