mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-17 00:33:06 +00:00
43 lines
1.4 KiB
Text
43 lines
1.4 KiB
Text
|
QSPI Boot source support Overview
|
||
|
-------------------
|
||
|
1. LS1043A
|
||
|
LS1043AQDS
|
||
|
2. LS2080A
|
||
|
LS2080AQDS
|
||
|
3. LS1012A
|
||
|
LS1012AQDS
|
||
|
LS1012ARDB
|
||
|
4. LS1046A
|
||
|
LS1046AQDS
|
||
|
LS1046ARDB
|
||
|
|
||
|
Booting from QSPI
|
||
|
-------------------
|
||
|
Booting from QSPI requires two images, RCW and u-boot-dtb.bin.
|
||
|
The difference between QSPI boot RCW image and NOR boot image is the PBI
|
||
|
command sequence for setting the boot location pointer. It's should point
|
||
|
to the address for u-boot in QSPI flash.
|
||
|
|
||
|
RCW image should be written to the beginning of QSPI flash device.
|
||
|
Example of using u-boot command
|
||
|
|
||
|
=> sf probe 0:0
|
||
|
SF: Detected S25FL256S_64K with page size 256 Bytes, erase size 64 KiB, total 32 MiB
|
||
|
=> sf erase 0 +<size of rcw image>
|
||
|
SF: 65536 bytes @ 0x0 Erased: OK
|
||
|
=> sf write <rcw image in memory> 0 <size of rcw image>
|
||
|
SF: 164 bytes @ 0x0 Written: OK
|
||
|
|
||
|
To get the QSPI image, build u-boot with QSPI config, for example,
|
||
|
<board_name>_qspi_defconfig. The image needed is u-boot-dtb.bin.
|
||
|
The u-boot image should be written to 0x10000(but 0x1000 for LS1043A, LS2080A).
|
||
|
|
||
|
=> sf probe 0:0
|
||
|
SF: Detected S25FL256S_64K with page size 256 Bytes, erase size 64 KiB, total 32 MiB
|
||
|
=> sf erase 10000 +<size of u-boot image>
|
||
|
SF: 589824 bytes @ 0x10000 Erased: OK
|
||
|
=> sf write <u-boot image in memory> 10000 <size of u-boot image>
|
||
|
SF: 580966 bytes @ 0x10000 Written: OK
|
||
|
|
||
|
With these two images in QSPI flash device, the board can boot from QSPI.
|