2010-09-09 21:03:31 +00:00
|
|
|
/*
|
|
|
|
* (C) Copyright 2003-2005
|
|
|
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
|
|
*
|
|
|
|
* (C) Copyright 2010
|
|
|
|
* Sergei Poselenov, Emcraft Systems, sposelenov@emcraft.com.
|
|
|
|
*
|
2013-10-07 11:07:26 +00:00
|
|
|
* SPDX-License-Identifier: GPL-2.0+
|
2010-09-09 21:03:31 +00:00
|
|
|
*/
|
|
|
|
|
|
|
|
#ifndef __CONFIG_H
|
|
|
|
#define __CONFIG_H
|
|
|
|
|
|
|
|
/*
|
|
|
|
* High Level Configuration Options
|
|
|
|
* (easy to change)
|
|
|
|
*/
|
|
|
|
|
2014-01-16 02:03:07 +00:00
|
|
|
#define CONFIG_MPC5200 1 /* This is a MPC5200 CPU */
|
2010-09-09 21:03:31 +00:00
|
|
|
#define CONFIG_A4M072 1 /* ... on A4M072 board */
|
|
|
|
#define CONFIG_MPC5200_DDR 1 /* ... use DDR RAM */
|
2014-11-19 08:37:46 +00:00
|
|
|
#define CONFIG_DISPLAY_BOARDINFO
|
2010-09-09 21:03:31 +00:00
|
|
|
|
2010-10-18 21:43:37 +00:00
|
|
|
#define CONFIG_SYS_TEXT_BASE 0xFE000000
|
|
|
|
|
2010-09-09 21:03:31 +00:00
|
|
|
#define CONFIG_MISC_INIT_R
|
|
|
|
|
|
|
|
#define CONFIG_SYS_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */
|
|
|
|
|
|
|
|
#define CONFIG_HIGH_BATS 1 /* High BATs supported */
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Serial console configuration
|
|
|
|
*/
|
|
|
|
#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */
|
|
|
|
#define CONFIG_BAUDRATE 9600 /* ... at 9600 bps */
|
|
|
|
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
|
|
|
|
/* define to enable silent console */
|
|
|
|
#define CONFIG_SILENT_CONSOLE
|
|
|
|
#define CONFIG_SYS_DEVICE_NULLDEV 1 /* include nulldev device */
|
|
|
|
|
|
|
|
/*
|
|
|
|
* PCI Mapping:
|
|
|
|
* 0x40000000 - 0x4fffffff - PCI Memory
|
|
|
|
* 0x50000000 - 0x50ffffff - PCI IO Space
|
|
|
|
*/
|
|
|
|
#define CONFIG_PCI
|
|
|
|
|
|
|
|
#if defined(CONFIG_PCI)
|
|
|
|
#define CONFIG_PCI_PNP 1
|
|
|
|
#define CONFIG_PCI_SCAN_SHOW 1
|
|
|
|
#define CONFIG_PCIAUTO_SKIP_HOST_BRIDGE 1
|
|
|
|
|
|
|
|
#define CONFIG_PCI_MEM_BUS 0x40000000
|
|
|
|
#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS
|
|
|
|
#define CONFIG_PCI_MEM_SIZE 0x10000000
|
|
|
|
|
|
|
|
#define CONFIG_PCI_IO_BUS 0x50000000
|
|
|
|
#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS
|
|
|
|
#define CONFIG_PCI_IO_SIZE 0x01000000
|
|
|
|
#endif
|
|
|
|
|
|
|
|
#define CONFIG_SYS_XLB_PIPELINING 1
|
|
|
|
|
2010-10-27 20:48:30 +00:00
|
|
|
#undef CONFIG_EEPRO100
|
2010-09-09 21:03:31 +00:00
|
|
|
|
|
|
|
/* Partitions */
|
|
|
|
#define CONFIG_MAC_PARTITION
|
|
|
|
#define CONFIG_DOS_PARTITION
|
|
|
|
|
|
|
|
/* USB */
|
|
|
|
#define CONFIG_USB_OHCI_NEW
|
|
|
|
#define CONFIG_USB_STORAGE
|
|
|
|
#define CONFIG_SYS_OHCI_BE_CONTROLLER
|
|
|
|
#undef CONFIG_SYS_USB_OHCI_BOARD_INIT
|
|
|
|
#define CONFIG_SYS_USB_OHCI_CPU_INIT 1
|
|
|
|
#define CONFIG_SYS_USB_OHCI_REGS_BASE MPC5XXX_USB
|
|
|
|
#define CONFIG_SYS_USB_OHCI_SLOT_NAME "mpc5200"
|
|
|
|
#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 15
|
|
|
|
|
|
|
|
#define CONFIG_TIMESTAMP /* Print image info with timestamp */
|
|
|
|
|
|
|
|
/*
|
|
|
|
* BOOTP options
|
|
|
|
*/
|
|
|
|
#define CONFIG_BOOTP_BOOTFILESIZE
|
|
|
|
#define CONFIG_BOOTP_BOOTPATH
|
|
|
|
#define CONFIG_BOOTP_GATEWAY
|
|
|
|
#define CONFIG_BOOTP_HOSTNAME
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Command line configuration.
|
|
|
|
*/
|
|
|
|
#define CONFIG_CMD_EEPROM
|
|
|
|
#define CONFIG_CMD_FAT
|
|
|
|
#define CONFIG_CMD_I2C
|
|
|
|
#define CONFIG_CMD_IDE
|
|
|
|
#define CONFIG_CMD_SNTP
|
|
|
|
#define CONFIG_CMD_USB
|
|
|
|
#define CONFIG_CMD_MII
|
|
|
|
#define CONFIG_CMD_DHCP
|
|
|
|
#define CONFIG_CMD_PING
|
2010-09-09 21:03:33 +00:00
|
|
|
#define CONFIG_CMD_DISPLAY
|
2010-09-09 21:03:31 +00:00
|
|
|
|
|
|
|
#if defined(CONFIG_PCI)
|
|
|
|
#define CONFIG_CMD_PCI
|
|
|
|
#endif
|
|
|
|
|
2010-10-18 21:43:37 +00:00
|
|
|
#if (CONFIG_SYS_TEXT_BASE == 0xFE000000) /* Boot low with 32 MB Flash */
|
2010-09-09 21:03:31 +00:00
|
|
|
#define CONFIG_SYS_LOWBOOT 1
|
|
|
|
#define CONFIG_SYS_LOWBOOT32 1
|
|
|
|
#endif
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Autobooting
|
|
|
|
*/
|
|
|
|
#define CONFIG_BOOTDELAY 2 /* autoboot after 2 seconds */
|
|
|
|
|
|
|
|
#define CONFIG_SYS_AUTOLOAD "n"
|
|
|
|
|
|
|
|
#undef CONFIG_BOOTARGS
|
|
|
|
#define CONFIG_PREBOOT "run try_update"
|
|
|
|
|
|
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
2010-10-21 15:20:09 +00:00
|
|
|
"bk=run add_mtd ; run add_consolespec ; bootm 200000\0" \
|
|
|
|
"cf1=diskboot 200000 0:1\0" \
|
|
|
|
"bootcmd_cf1=run bcf1\0" \
|
|
|
|
"bcf=setenv bootargs root=/dev/hda3\0" \
|
|
|
|
"bootcmd_nfs=run bnfs\0" \
|
|
|
|
"norargs=setenv bootargs root=/dev/mtdblock3 rootfstype=cramfs "\
|
|
|
|
"panic=1\0" \
|
|
|
|
"bootcmd_nor=cp.b ${kernel_addr} 200000 100000;" \
|
|
|
|
"run norargs addip; run bk\0" \
|
|
|
|
"bnfs=nfs 200000 ${rootpath}/boot/uImage;" \
|
|
|
|
"run nfsargs addip ; run bk\0" \
|
|
|
|
"nfsargs=setenv bootargs root=/dev/nfs rw " \
|
|
|
|
"nfsroot=${serverip}:${rootpath}\0" \
|
|
|
|
"try_update=usb start;sleep 2;usb start;sleep 1;" \
|
|
|
|
"fatload usb 0 2F0000 PCPUUPDT 2FF;usb stop;" \
|
|
|
|
"source 2F0000\0" \
|
|
|
|
"env_addr=FE060000\0" \
|
|
|
|
"kernel_addr=FE100000\0" \
|
|
|
|
"rootfs_addr=FE200000\0" \
|
|
|
|
"add_mtd=setenv bootargs ${bootargs} mtdparts=" \
|
|
|
|
"phys_mapped_flash:384k(u),640k(e),1m(k),30m(r)\0" \
|
|
|
|
"bcf1=run cf1; run bcf; run addip; run bk\0" \
|
|
|
|
"add_consolespec=setenv bootargs ${bootargs} " \
|
|
|
|
"console=/dev/null quiet\0" \
|
|
|
|
"addip=if test -n ${ethaddr};" \
|
|
|
|
"then if test -n ${ipaddr};" \
|
|
|
|
"then setenv bootargs ${bootargs} " \
|
|
|
|
"ip=${ipaddr}:${serverip}:${gatewayip}:"\
|
|
|
|
"${netmask}:${hostname}:${netdev}:off;" \
|
|
|
|
"fi;" \
|
|
|
|
"else;" \
|
|
|
|
"setenv bootargs ${bootargs} no_ethaddr;" \
|
|
|
|
"fi\0" \
|
|
|
|
"hostname=CPUP0\0" \
|
|
|
|
"netdev=eth0\0" \
|
|
|
|
"bootcmd=run bootcmd_nor\0" \
|
2010-09-09 21:03:31 +00:00
|
|
|
""
|
|
|
|
/*
|
|
|
|
* IPB Bus clocking configuration.
|
|
|
|
*/
|
|
|
|
#undef CONFIG_SYS_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */
|
|
|
|
|
|
|
|
/*
|
|
|
|
* I2C configuration
|
|
|
|
*/
|
|
|
|
#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
|
|
|
|
#define CONFIG_SYS_I2C_MODULE 2 /* Select I2C module #1 or #2 */
|
|
|
|
|
|
|
|
#define CONFIG_SYS_I2C_SPEED 100000 /* 100 kHz */
|
|
|
|
#define CONFIG_SYS_I2C_SLAVE 0x7F
|
|
|
|
|
|
|
|
/*
|
|
|
|
* EEPROM configuration
|
|
|
|
*/
|
|
|
|
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x52 /* 1010010x */
|
|
|
|
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
|
|
|
|
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6
|
|
|
|
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
|
|
|
|
#define CONFIG_SYS_EEPROM_WREN 1
|
|
|
|
#define CONFIG_SYS_EEPROM_WP GPIO_PSC2_4
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Flash configuration
|
|
|
|
*/
|
|
|
|
#define CONFIG_SYS_FLASH_BASE 0xFE000000
|
|
|
|
#define CONFIG_SYS_FLASH_SIZE 0x02000000
|
|
|
|
#if !defined(CONFIG_SYS_LOWBOOT)
|
|
|
|
#error "CONFIG_SYS_LOWBOOT not defined?"
|
|
|
|
#else /* CONFIG_SYS_LOWBOOT */
|
|
|
|
#if defined(CONFIG_SYS_LOWBOOT32)
|
|
|
|
#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x00060000)
|
|
|
|
#endif
|
|
|
|
#endif /* CONFIG_SYS_LOWBOOT */
|
|
|
|
|
|
|
|
#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of memory banks */
|
|
|
|
#define CONFIG_SYS_MAX_FLASH_SECT 256 /* max num of sects on one chip */
|
|
|
|
#define CONFIG_FLASH_CFI_DRIVER
|
|
|
|
#define CONFIG_SYS_FLASH_CFI
|
|
|
|
#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
|
|
|
|
#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_CS0_START}
|
2010-10-21 15:20:13 +00:00
|
|
|
#define CONFIG_SYS_FLASH_BANKS_SIZES {CONFIG_SYS_CS0_SIZE}
|
2010-09-09 21:03:31 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Environment settings
|
|
|
|
*/
|
|
|
|
#define CONFIG_ENV_IS_IN_FLASH 1
|
|
|
|
#define CONFIG_ENV_SIZE 0x10000
|
|
|
|
#define CONFIG_ENV_SECT_SIZE 0x20000
|
|
|
|
#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
|
|
|
|
#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
|
|
|
|
|
|
|
|
#define CONFIG_ENV_OVERWRITE 1
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Memory map
|
|
|
|
*/
|
|
|
|
#define CONFIG_SYS_MBAR 0xF0000000
|
|
|
|
#define CONFIG_SYS_SDRAM_BASE 0x00000000
|
|
|
|
#define CONFIG_SYS_DEFAULT_MBAR 0x80000000
|
|
|
|
|
|
|
|
/* Use SRAM until RAM will be available */
|
|
|
|
#define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM
|
2010-10-26 11:32:32 +00:00
|
|
|
#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE /* Size of used area in DPRAM */
|
2010-09-09 21:03:31 +00:00
|
|
|
|
|
|
|
|
2010-10-26 12:34:52 +00:00
|
|
|
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
|
2010-09-09 21:03:31 +00:00
|
|
|
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
|
|
|
|
|
2010-10-18 21:43:37 +00:00
|
|
|
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
|
2010-09-09 21:03:31 +00:00
|
|
|
#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
|
|
|
|
# define CONFIG_SYS_RAMBOOT 1
|
|
|
|
#endif
|
|
|
|
|
|
|
|
#define CONFIG_SYS_MONITOR_LEN (384 << 10) /* Reserve 384 kB for Monitor */
|
|
|
|
#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
|
|
|
|
#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Ethernet configuration
|
|
|
|
*/
|
|
|
|
#define CONFIG_MPC5xxx_FEC 1
|
|
|
|
#define CONFIG_MPC5xxx_FEC_MII100
|
|
|
|
/*
|
|
|
|
* Define CONFIG_MPC5xxx_FEC_MII10 to force FEC at 10Mb
|
|
|
|
*/
|
|
|
|
/* #define CONFIG_MPC5xxx_FEC_MII10 */
|
|
|
|
#define CONFIG_PHY_ADDR 0x1f
|
|
|
|
#define CONFIG_PHY_TYPE 0x79c874 /* AMD Phy Controller */
|
|
|
|
|
|
|
|
/*
|
|
|
|
* GPIO configuration
|
|
|
|
*/
|
2010-09-09 21:03:33 +00:00
|
|
|
#define CONFIG_SYS_GPS_PORT_CONFIG 0x18000004
|
2010-09-09 21:03:31 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Miscellaneous configurable options
|
|
|
|
*/
|
|
|
|
#define CONFIG_SYS_HUSH_PARSER
|
|
|
|
#define CONFIG_CMDLINE_EDITING 1
|
|
|
|
#define CONFIG_SYS_LONGHELP /* undef to save memory */
|
|
|
|
#if defined(CONFIG_CMD_KGDB)
|
|
|
|
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
|
|
|
|
#else
|
|
|
|
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
|
|
|
|
#endif
|
|
|
|
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
|
|
|
|
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
|
|
|
|
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
|
|
|
|
|
|
|
|
#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */
|
|
|
|
#define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */
|
|
|
|
|
|
|
|
#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
|
|
|
|
|
|
|
|
#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
|
|
|
|
#if defined(CONFIG_CMD_KGDB)
|
|
|
|
# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Various low-level settings
|
|
|
|
*/
|
|
|
|
#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI
|
|
|
|
#define CONFIG_SYS_HID0_FINAL HID0_ICE
|
|
|
|
/* Flash at CSBoot, CS0 */
|
|
|
|
#define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE
|
|
|
|
#define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE
|
|
|
|
#define CONFIG_SYS_BOOTCS_CFG 0x0002DD00
|
|
|
|
#define CONFIG_SYS_CS0_START CONFIG_SYS_FLASH_BASE
|
|
|
|
#define CONFIG_SYS_CS0_SIZE CONFIG_SYS_FLASH_SIZE
|
|
|
|
/* External SRAM at CS1 */
|
|
|
|
#define CONFIG_SYS_CS1_START 0x62000000
|
|
|
|
#define CONFIG_SYS_CS1_SIZE 0x00400000
|
|
|
|
#define CONFIG_SYS_CS1_CFG 0x00009930
|
|
|
|
#define CONFIG_SYS_SRAM_BASE CONFIG_SYS_CS1_START
|
|
|
|
#define CONFIG_SYS_SRAM_SIZE CONFIG_SYS_CS1_SIZE
|
2010-09-09 21:03:33 +00:00
|
|
|
/* LED display at CS7 */
|
|
|
|
#define CONFIG_SYS_CS7_START 0x6a000000
|
|
|
|
#define CONFIG_SYS_CS7_SIZE (64*1024)
|
|
|
|
#define CONFIG_SYS_CS7_CFG 0x0000bf30
|
2010-09-09 21:03:31 +00:00
|
|
|
|
|
|
|
#define CONFIG_SYS_CS_BURST 0x00000000
|
|
|
|
#define CONFIG_SYS_CS_DEADCYCLE 0x33333003
|
|
|
|
|
|
|
|
#define CONFIG_SYS_RESET_ADDRESS 0xff000000
|
|
|
|
|
|
|
|
/*-----------------------------------------------------------------------
|
|
|
|
* USB stuff
|
|
|
|
*-----------------------------------------------------------------------
|
|
|
|
*/
|
|
|
|
#define CONFIG_USB_CLOCK 0x0001BBBB
|
|
|
|
#define CONFIG_USB_CONFIG 0x00001000 /* 0x4000 for SE mode */
|
|
|
|
|
|
|
|
/*-----------------------------------------------------------------------
|
|
|
|
* IDE/ATA stuff Supports IDE harddisk
|
|
|
|
*-----------------------------------------------------------------------
|
|
|
|
*/
|
|
|
|
|
|
|
|
#undef CONFIG_IDE_8xx_PCCARD /* Use IDE with PC Card Adapter */
|
|
|
|
|
|
|
|
#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
|
|
|
|
#undef CONFIG_IDE_LED /* LED for ide not supported */
|
|
|
|
|
|
|
|
#define CONFIG_IDE_PREINIT
|
|
|
|
|
|
|
|
#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */
|
|
|
|
#define CONFIG_SYS_IDE_MAXDEVICE 1 /* max. 2 drives per IDE bus */
|
|
|
|
|
|
|
|
#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000
|
|
|
|
|
|
|
|
#define CONFIG_SYS_ATA_BASE_ADDR MPC5XXX_ATA
|
|
|
|
|
|
|
|
/* Offset for data I/O */
|
|
|
|
#define CONFIG_SYS_ATA_DATA_OFFSET (0x0060)
|
|
|
|
|
|
|
|
/* Offset for normal register accesses */
|
|
|
|
#define CONFIG_SYS_ATA_REG_OFFSET (CONFIG_SYS_ATA_DATA_OFFSET)
|
|
|
|
|
|
|
|
/* Offset for alternate registers */
|
|
|
|
#define CONFIG_SYS_ATA_ALT_OFFSET (0x005C)
|
|
|
|
|
|
|
|
/* Interval between registers */
|
|
|
|
#define CONFIG_SYS_ATA_STRIDE 4
|
|
|
|
|
|
|
|
#define CONFIG_ATAPI 1
|
|
|
|
|
|
|
|
/*-----------------------------------------------------------------------
|
|
|
|
* Open firmware flat tree support
|
|
|
|
*-----------------------------------------------------------------------
|
|
|
|
*/
|
|
|
|
#define OF_CPU "PowerPC,5200@0"
|
|
|
|
#define OF_SOC "soc5200@f0000000"
|
|
|
|
#define OF_TBCLK (bd->bi_busfreq / 4)
|
|
|
|
#define OF_STDOUT_PATH "/soc5200@f0000000/serial@2000"
|
|
|
|
|
2010-09-09 21:03:33 +00:00
|
|
|
/* Support for the 7-segment display */
|
|
|
|
#define CONFIG_SYS_DISP_CHR_RAM CONFIG_SYS_CS7_START
|
|
|
|
#define CONFIG_SHOW_ACTIVITY /* used for display realization */
|
|
|
|
|
a4m072: support for SHOW_BOOT_PROGRESS feature using LED display
This patch adds support for displaying boot progress codes on a4m072 board
using LED display. As we can display only one symbol at any time on the hardware
(two symbols with blinking) we can't display progress codes directly and have
to map them to 2-symbol codes.
We use the following mapping on the a4m972 board:
[1, 8] U [100, 108] -> 5
[-9, -1] U [-101, -100] U [-113, -103] -> -5
[9, 14] U [120, 123] U [125, 129] -> 8
[-13, -10] U [-122, -120] U [-127, -124] U {-129} -> -8
{15} -> 9
[-32, -30] -> -A
[-40, -35] U [-51, -42] U [-58, -53] U
[-83, -80] U {-64, -130, -140, -150} -> -B
Other progress code are ignored. One symbol codes are displayed steady while
two-symbol codes are displayed using blinking. Boot progress codes are
displayed with decimal got unset (as opposed to 'display' command output).
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
2010-09-09 21:03:34 +00:00
|
|
|
#define CONFIG_SHOW_BOOT_PROGRESS
|
|
|
|
|
2010-09-09 21:03:31 +00:00
|
|
|
#endif /* __CONFIG_H */
|