Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-14 17:07:38 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/common/spl/spl_semihosting.c

72 lines
1.5 KiB
C
Raw Normal View History

spl: Add semihosting boot method This adds a boot method for loading the next stage from the host. It is mostly modeled off of spl_load_image_ext. I am not really sure why/how spl_load_image_fat uses three different methods to load the image, but the simple case seems to work OK for now. To control the presence of this boot method, we add a config symbol. While we're at it, we update the original semihosting config symbol. I think semihosting has some advantages of other forms of JTAG boot. Common other ways to boot from JTAG include: - Implementing DDR initialization through JTAG (typically with dozens of lines of TCL) and then loading U-Boot. The DDR initialization typically uses hard-coded register writes, and is not easily adapted to different boards. BOOT_DEVICE_SMH allows booting with SPL, leveraging U-Boot's existing DDR initialization code. This is the method used by NXP's CodeWarrior IDE on Layerscape processors (see AN12270). - Loading a bootloader into SDRAM, waiting for it to initialize DDR, and then loading U-Boot. This is tricky, because the debugger must stop the boot after the bootloader has completed its work. Trying to load U-Boot too early can cause failure to boot. This is the method used by Xilinx with its Zynq(MP) processors. - Loading SPL with BOOT_DEVICE_RAM and breaking before SPL loads the image to load U-Boot at the appropriate place. This can be a bit tricky, because the load address is dependent on the header size. An elf with symbols must also be used in order to stop at the appropriate point. BOOT_DEVICE_SMH can be viewed as an extension of this process, where SPL automatically stops and tells the host where to place the image. Signed-off-by: Sean Anderson <sean.anderson@seco.com>
2022-03-22 20:59:19 +00:00
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2022 Sean Anderson <sean.anderson@seco.com>
*/
#include <common.h>
#include <image.h>
#include <log.h>
#include <semihosting.h>
#include <spl.h>
static int smh_read_full(long fd, void *memp, size_t len)
{
long read;
read = smh_read(fd, memp, len);
if (read < 0)
return read;
if (read != len)
return -EIO;
return 0;
}
static int spl_smh_load_image(struct spl_image_info *spl_image,
struct spl_boot_device *bootdev)
{
const char *filename = CONFIG_SPL_FS_LOAD_PAYLOAD_NAME;
int ret;
long fd, len;
treewide: Drop image_header_t typedef This is not needed and we should avoid typedefs. Use the struct instead and rename it to indicate that it really is a legacy struct. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-09-07 02:26:52 +00:00
struct legacy_img_hdr *header =
spl: Add semihosting boot method This adds a boot method for loading the next stage from the host. It is mostly modeled off of spl_load_image_ext. I am not really sure why/how spl_load_image_fat uses three different methods to load the image, but the simple case seems to work OK for now. To control the presence of this boot method, we add a config symbol. While we're at it, we update the original semihosting config symbol. I think semihosting has some advantages of other forms of JTAG boot. Common other ways to boot from JTAG include: - Implementing DDR initialization through JTAG (typically with dozens of lines of TCL) and then loading U-Boot. The DDR initialization typically uses hard-coded register writes, and is not easily adapted to different boards. BOOT_DEVICE_SMH allows booting with SPL, leveraging U-Boot's existing DDR initialization code. This is the method used by NXP's CodeWarrior IDE on Layerscape processors (see AN12270). - Loading a bootloader into SDRAM, waiting for it to initialize DDR, and then loading U-Boot. This is tricky, because the debugger must stop the boot after the bootloader has completed its work. Trying to load U-Boot too early can cause failure to boot. This is the method used by Xilinx with its Zynq(MP) processors. - Loading SPL with BOOT_DEVICE_RAM and breaking before SPL loads the image to load U-Boot at the appropriate place. This can be a bit tricky, because the load address is dependent on the header size. An elf with symbols must also be used in order to stop at the appropriate point. BOOT_DEVICE_SMH can be viewed as an extension of this process, where SPL automatically stops and tells the host where to place the image. Signed-off-by: Sean Anderson <sean.anderson@seco.com>
2022-03-22 20:59:19 +00:00
spl_get_load_buffer(-sizeof(*header), sizeof(*header));
fd = smh_open(filename, MODE_READ | MODE_BINARY);
if (fd < 0) {
log_debug("could not open %s: %ld\n", filename, fd);
return fd;
}
ret = smh_flen(fd);
if (ret < 0) {
log_debug("could not get length of image: %d\n", ret);
goto out;
}
len = ret;
treewide: Drop image_header_t typedef This is not needed and we should avoid typedefs. Use the struct instead and rename it to indicate that it really is a legacy struct. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-09-07 02:26:52 +00:00
ret = smh_read_full(fd, header, sizeof(struct legacy_img_hdr));
spl: Add semihosting boot method This adds a boot method for loading the next stage from the host. It is mostly modeled off of spl_load_image_ext. I am not really sure why/how spl_load_image_fat uses three different methods to load the image, but the simple case seems to work OK for now. To control the presence of this boot method, we add a config symbol. While we're at it, we update the original semihosting config symbol. I think semihosting has some advantages of other forms of JTAG boot. Common other ways to boot from JTAG include: - Implementing DDR initialization through JTAG (typically with dozens of lines of TCL) and then loading U-Boot. The DDR initialization typically uses hard-coded register writes, and is not easily adapted to different boards. BOOT_DEVICE_SMH allows booting with SPL, leveraging U-Boot's existing DDR initialization code. This is the method used by NXP's CodeWarrior IDE on Layerscape processors (see AN12270). - Loading a bootloader into SDRAM, waiting for it to initialize DDR, and then loading U-Boot. This is tricky, because the debugger must stop the boot after the bootloader has completed its work. Trying to load U-Boot too early can cause failure to boot. This is the method used by Xilinx with its Zynq(MP) processors. - Loading SPL with BOOT_DEVICE_RAM and breaking before SPL loads the image to load U-Boot at the appropriate place. This can be a bit tricky, because the load address is dependent on the header size. An elf with symbols must also be used in order to stop at the appropriate point. BOOT_DEVICE_SMH can be viewed as an extension of this process, where SPL automatically stops and tells the host where to place the image. Signed-off-by: Sean Anderson <sean.anderson@seco.com>
2022-03-22 20:59:19 +00:00
if (ret) {
log_debug("could not read image header: %d\n", ret);
goto out;
}
ret = spl_parse_image_header(spl_image, bootdev, header);
if (ret) {
log_debug("failed to parse image header: %d\n", ret);
goto out;
}
ret = smh_seek(fd, 0);
if (ret) {
log_debug("could not seek to start of image: %d\n", ret);
goto out;
}
ret = smh_read_full(fd, (void *)spl_image->load_addr, len);
if (ret)
log_debug("could not read %s: %d\n", filename, ret);
out:
smh_close(fd);
return ret;
}
SPL_LOAD_IMAGE_METHOD("SEMIHOSTING", 0, BOOT_DEVICE_SMH, spl_smh_load_image);
Reference in a new issue Copy permalink