u-boot/drivers/net/phy/micrel.c

531 lines
13 KiB
C
Raw Normal View History

/*
* Micrel PHY drivers
*
* SPDX-License-Identifier: GPL-2.0+
*
* Copyright 2010-2011 Freescale Semiconductor, Inc.
* author Andy Fleming
* (C) 2012 NetModule AG, David Andrey, added KSZ9031
*/
#include <config.h>
#include <common.h>
#include <dm.h>
#include <errno.h>
#include <fdtdec.h>
#include <micrel.h>
#include <phy.h>
DECLARE_GLOBAL_DATA_PTR;
static struct phy_driver KSZ804_driver = {
.name = "Micrel KSZ804",
.uid = 0x221510,
.mask = 0xfffff0,
.features = PHY_BASIC_FEATURES,
.config = &genphy_config,
.startup = &genphy_startup,
.shutdown = &genphy_shutdown,
};
#define MII_KSZPHY_OMSO 0x16
#define KSZPHY_OMSO_B_CAST_OFF (1 << 9)
static int ksz_genconfig_bcastoff(struct phy_device *phydev)
{
int ret;
ret = phy_read(phydev, MDIO_DEVAD_NONE, MII_KSZPHY_OMSO);
if (ret < 0)
return ret;
ret = phy_write(phydev, MDIO_DEVAD_NONE, MII_KSZPHY_OMSO,
ret | KSZPHY_OMSO_B_CAST_OFF);
if (ret < 0)
return ret;
return genphy_config(phydev);
}
static struct phy_driver KSZ8031_driver = {
.name = "Micrel KSZ8021/KSZ8031",
.uid = 0x221550,
.mask = 0xfffff0,
.features = PHY_BASIC_FEATURES,
.config = &ksz_genconfig_bcastoff,
.startup = &genphy_startup,
.shutdown = &genphy_shutdown,
};
/**
* KSZ8051
*/
#define MII_KSZ8051_PHY_OMSO 0x16
#define MII_KSZ8051_PHY_OMSO_NAND_TREE_ON (1 << 5)
static int ksz8051_config(struct phy_device *phydev)
{
unsigned val;
/* Disable NAND-tree */
val = phy_read(phydev, MDIO_DEVAD_NONE, MII_KSZ8051_PHY_OMSO);
val &= ~MII_KSZ8051_PHY_OMSO_NAND_TREE_ON;
phy_write(phydev, MDIO_DEVAD_NONE, MII_KSZ8051_PHY_OMSO, val);
return genphy_config(phydev);
}
static struct phy_driver KSZ8051_driver = {
.name = "Micrel KSZ8051",
.uid = 0x221550,
.mask = 0xfffff0,
.features = PHY_BASIC_FEATURES,
.config = &ksz8051_config,
.startup = &genphy_startup,
.shutdown = &genphy_shutdown,
};
static struct phy_driver KSZ8081_driver = {
.name = "Micrel KSZ8081",
.uid = 0x221560,
.mask = 0xfffff0,
.features = PHY_BASIC_FEATURES,
.config = &ksz_genconfig_bcastoff,
.startup = &genphy_startup,
.shutdown = &genphy_shutdown,
};
/**
* KSZ8895
*/
static unsigned short smireg_to_phy(unsigned short reg)
{
return ((reg & 0xc0) >> 3) + 0x06 + ((reg & 0x20) >> 5);
}
static unsigned short smireg_to_reg(unsigned short reg)
{
return reg & 0x1F;
}
static void ksz8895_write_smireg(struct phy_device *phydev, int smireg, int val)
{
phydev->bus->write(phydev->bus, smireg_to_phy(smireg), MDIO_DEVAD_NONE,
smireg_to_reg(smireg), val);
}
#if 0
static int ksz8895_read_smireg(struct phy_device *phydev, int smireg)
{
return phydev->bus->read(phydev->bus, smireg_to_phy(smireg),
MDIO_DEVAD_NONE, smireg_to_reg(smireg));
}
#endif
int ksz8895_config(struct phy_device *phydev)
{
/* we are connected directly to the switch without
* dedicated PHY. SCONF1 == 001 */
phydev->link = 1;
phydev->duplex = DUPLEX_FULL;
phydev->speed = SPEED_100;
/* Force the switch to start */
ksz8895_write_smireg(phydev, 1, 1);
return 0;
}
static int ksz8895_startup(struct phy_device *phydev)
{
return 0;
}
static struct phy_driver ksz8895_driver = {
.name = "Micrel KSZ8895/KSZ8864",
.uid = 0x221450,
.mask = 0xffffe1,
.features = PHY_BASIC_FEATURES,
.config = &ksz8895_config,
.startup = &ksz8895_startup,
.shutdown = &genphy_shutdown,
};
#ifndef CONFIG_PHY_MICREL_KSZ9021
/*
* I can't believe Micrel used the exact same part number
* for the KSZ9021. Shame Micrel, Shame!
*/
static struct phy_driver KS8721_driver = {
.name = "Micrel KS8721BL",
.uid = 0x221610,
.mask = 0xfffff0,
.features = PHY_BASIC_FEATURES,
.config = &genphy_config,
.startup = &genphy_startup,
.shutdown = &genphy_shutdown,
};
#endif
/*
* KSZ9021 - KSZ9031 common
*/
#define MII_KSZ90xx_PHY_CTL 0x1f
#define MIIM_KSZ90xx_PHYCTL_1000 (1 << 6)
#define MIIM_KSZ90xx_PHYCTL_100 (1 << 5)
#define MIIM_KSZ90xx_PHYCTL_10 (1 << 4)
#define MIIM_KSZ90xx_PHYCTL_DUPLEX (1 << 3)
static int ksz90xx_startup(struct phy_device *phydev)
{
unsigned phy_ctl;
int ret;
ret = genphy_update_link(phydev);
if (ret)
return ret;
phy_ctl = phy_read(phydev, MDIO_DEVAD_NONE, MII_KSZ90xx_PHY_CTL);
if (phy_ctl & MIIM_KSZ90xx_PHYCTL_DUPLEX)
phydev->duplex = DUPLEX_FULL;
else
phydev->duplex = DUPLEX_HALF;
if (phy_ctl & MIIM_KSZ90xx_PHYCTL_1000)
phydev->speed = SPEED_1000;
else if (phy_ctl & MIIM_KSZ90xx_PHYCTL_100)
phydev->speed = SPEED_100;
else if (phy_ctl & MIIM_KSZ90xx_PHYCTL_10)
phydev->speed = SPEED_10;
return 0;
}
/* Common OF config bits for KSZ9021 and KSZ9031 */
#if defined(CONFIG_PHY_MICREL_KSZ9021) || defined(CONFIG_PHY_MICREL_KSZ9031)
#ifdef CONFIG_DM_ETH
struct ksz90x1_reg_field {
const char *name;
const u8 size; /* Size of the bitfield, in bits */
const u8 off; /* Offset from bit 0 */
const u8 dflt; /* Default value */
};
struct ksz90x1_ofcfg {
const u16 reg;
const u16 devad;
const struct ksz90x1_reg_field *grp;
const u16 grpsz;
};
static const struct ksz90x1_reg_field ksz90x1_rxd_grp[] = {
{ "rxd0-skew-ps", 4, 0, 0x7 }, { "rxd1-skew-ps", 4, 4, 0x7 },
{ "rxd2-skew-ps", 4, 8, 0x7 }, { "rxd3-skew-ps", 4, 12, 0x7 }
};
static const struct ksz90x1_reg_field ksz90x1_txd_grp[] = {
{ "txd0-skew-ps", 4, 0, 0x7 }, { "txd1-skew-ps", 4, 4, 0x7 },
{ "txd2-skew-ps", 4, 8, 0x7 }, { "txd3-skew-ps", 4, 12, 0x7 },
};
static int ksz90x1_of_config_group(struct phy_device *phydev,
struct ksz90x1_ofcfg *ofcfg)
{
struct udevice *dev = phydev->dev;
struct phy_driver *drv = phydev->drv;
const int ps_to_regval = 60;
int val[4];
int i, changed = 0, offset, max;
u16 regval = 0;
if (!drv || !drv->writeext)
return -EOPNOTSUPP;
for (i = 0; i < ofcfg->grpsz; i++) {
val[i] = fdtdec_get_uint(gd->fdt_blob, dev->of_offset,
ofcfg->grp[i].name, -1);
offset = ofcfg->grp[i].off;
if (val[i] == -1) {
/* Default register value for KSZ9021 */
regval |= ofcfg->grp[i].dflt << offset;
} else {
changed = 1; /* Value was changed in OF */
/* Calculate the register value and fix corner cases */
if (val[i] > ps_to_regval * 0xf) {
max = (1 << ofcfg->grp[i].size) - 1;
regval |= max << offset;
} else {
regval |= (val[i] / ps_to_regval) << offset;
}
}
}
if (!changed)
return 0;
return drv->writeext(phydev, 0, ofcfg->devad, ofcfg->reg, regval);
}
#endif
#endif
#ifdef CONFIG_PHY_MICREL_KSZ9021
/*
* KSZ9021
*/
/* PHY Registers */
#define MII_KSZ9021_EXTENDED_CTRL 0x0b
#define MII_KSZ9021_EXTENDED_DATAW 0x0c
#define MII_KSZ9021_EXTENDED_DATAR 0x0d
#define CTRL1000_PREFER_MASTER (1 << 10)
#define CTRL1000_CONFIG_MASTER (1 << 11)
#define CTRL1000_MANUAL_CONFIG (1 << 12)
drivers: net: phy: micrel: fix build errors with CONFIG_DM_ETH When Micrel phy is selected without CONFIG_PHY_MICREL_KSZ9031 or CONFIG_PHY_MICREL_KSZ9021 there is a build error. Fixing this by adding proper ifdefs drivers/net/phy/micrel.c:370:39: error: array type has incomplete element type static const struct ksz90x1_reg_field ksz9031_ctl_grp[] = ^ drivers/net/phy/micrel.c:372:39: error: array type has incomplete element type static const struct ksz90x1_reg_field ksz9031_clk_grp[] = ^ drivers/net/phy/micrel.c: In function ‘ksz9031_of_config’: drivers/net/phy/micrel.c:377:23: error: array type has incomplete element type struct ksz90x1_ofcfg ofcfg[] = { ^ drivers/net/phy/micrel.c:379:13: error: ‘ksz90x1_rxd_grp’ undeclared (first use in this function) { MII_KSZ9031_EXT_RGMII_RX_DATA_SKEW, 2, ksz90x1_rxd_grp, 4 }, ^ drivers/net/phy/micrel.c:379:13: note: each undeclared identifier is reported only once for each function it appears in drivers/net/phy/micrel.c:380:13: error: ‘ksz90x1_txd_grp’ undeclared (first use in this function) { MII_KSZ9031_EXT_RGMII_TX_DATA_SKEW, 2, ksz90x1_txd_grp, 4 }, ^ drivers/net/phy/micrel.c:386:3: warning: implicit declaration of function ‘ksz90x1_of_config_group’ [-Wimplicit-function-declaration] ret = ksz90x1_of_config_group(phydev, &(ofcfg[i])); ^ drivers/net/phy/micrel.c:377:23: warning: unused variable ‘ofcfg’ [-Wunused-variable] struct ksz90x1_ofcfg ofcfg[] = { ^ drivers/net/phy/micrel.c: At top level: drivers/net/phy/micrel.c:370:39: warning: ‘ksz9031_ctl_grp’ defined but not used [-Wunused-variable] static const struct ksz90x1_reg_field ksz9031_ctl_grp[] = ^ drivers/net/phy/micrel.c:372:39: warning: ‘ksz9031_clk_grp’ defined but not used [-Wunused-variable] static const struct ksz90x1_reg_field ksz9031_clk_grp[] = ^ scripts/Makefile.build:277: recipe for target 'drivers/net/phy/micrel.o' failed make[1]: *** [drivers/net/phy/micrel.o] Error 1 Makefile:1201: recipe for target 'drivers/net/phy' failed make: *** [drivers/net/phy] Error 2 make: *** Waiting for unfinished jobs.... Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-02-02 10:21:32 +00:00
#if defined(CONFIG_DM_ETH) && (defined(CONFIG_PHY_MICREL_KSZ9021) || \
defined(CONFIG_PHY_MICREL_KSZ9031))
static const struct ksz90x1_reg_field ksz9021_clk_grp[] = {
{ "txen-skew-ps", 4, 0, 0x7 }, { "txc-skew-ps", 4, 4, 0x7 },
{ "rxdv-skew-ps", 4, 8, 0x7 }, { "rxc-skew-ps", 4, 12, 0x7 },
};
static int ksz9021_of_config(struct phy_device *phydev)
{
struct ksz90x1_ofcfg ofcfg[] = {
{ MII_KSZ9021_EXT_RGMII_RX_DATA_SKEW, 0, ksz90x1_rxd_grp, 4 },
{ MII_KSZ9021_EXT_RGMII_TX_DATA_SKEW, 0, ksz90x1_txd_grp, 4 },
{ MII_KSZ9021_EXT_RGMII_CLOCK_SKEW, 0, ksz9021_clk_grp, 4 },
};
int i, ret = 0;
for (i = 0; i < ARRAY_SIZE(ofcfg); i++)
ret = ksz90x1_of_config_group(phydev, &(ofcfg[i]));
if (ret)
return ret;
return 0;
}
#else
static int ksz9021_of_config(struct phy_device *phydev)
{
return 0;
}
#endif
int ksz9021_phy_extended_write(struct phy_device *phydev, int regnum, u16 val)
{
/* extended registers */
phy_write(phydev, MDIO_DEVAD_NONE,
MII_KSZ9021_EXTENDED_CTRL, regnum | 0x8000);
return phy_write(phydev, MDIO_DEVAD_NONE,
MII_KSZ9021_EXTENDED_DATAW, val);
}
int ksz9021_phy_extended_read(struct phy_device *phydev, int regnum)
{
/* extended registers */
phy_write(phydev, MDIO_DEVAD_NONE, MII_KSZ9021_EXTENDED_CTRL, regnum);
return phy_read(phydev, MDIO_DEVAD_NONE, MII_KSZ9021_EXTENDED_DATAR);
}
static int ksz9021_phy_extread(struct phy_device *phydev, int addr, int devaddr,
int regnum)
{
return ksz9021_phy_extended_read(phydev, regnum);
}
static int ksz9021_phy_extwrite(struct phy_device *phydev, int addr,
int devaddr, int regnum, u16 val)
{
return ksz9021_phy_extended_write(phydev, regnum, val);
}
/* Micrel ksz9021 */
static int ksz9021_config(struct phy_device *phydev)
{
unsigned ctrl1000 = 0;
const unsigned master = CTRL1000_PREFER_MASTER |
CTRL1000_CONFIG_MASTER | CTRL1000_MANUAL_CONFIG;
unsigned features = phydev->drv->features;
int ret;
ret = ksz9021_of_config(phydev);
if (ret)
return ret;
if (getenv("disable_giga"))
features &= ~(SUPPORTED_1000baseT_Half |
SUPPORTED_1000baseT_Full);
/* force master mode for 1000BaseT due to chip errata */
if (features & SUPPORTED_1000baseT_Half)
ctrl1000 |= ADVERTISE_1000HALF | master;
if (features & SUPPORTED_1000baseT_Full)
ctrl1000 |= ADVERTISE_1000FULL | master;
phydev->advertising = phydev->supported = features;
phy_write(phydev, MDIO_DEVAD_NONE, MII_CTRL1000, ctrl1000);
genphy_config_aneg(phydev);
genphy_restart_aneg(phydev);
return 0;
}
static struct phy_driver ksz9021_driver = {
.name = "Micrel ksz9021",
.uid = 0x221610,
.mask = 0xfffff0,
.features = PHY_GBIT_FEATURES,
.config = &ksz9021_config,
.startup = &ksz90xx_startup,
.shutdown = &genphy_shutdown,
.writeext = &ksz9021_phy_extwrite,
.readext = &ksz9021_phy_extread,
};
#endif
/**
* KSZ9031
*/
/* PHY Registers */
#define MII_KSZ9031_MMD_ACCES_CTRL 0x0d
#define MII_KSZ9031_MMD_REG_DATA 0x0e
drivers: net: phy: micrel: fix build errors with CONFIG_DM_ETH When Micrel phy is selected without CONFIG_PHY_MICREL_KSZ9031 or CONFIG_PHY_MICREL_KSZ9021 there is a build error. Fixing this by adding proper ifdefs drivers/net/phy/micrel.c:370:39: error: array type has incomplete element type static const struct ksz90x1_reg_field ksz9031_ctl_grp[] = ^ drivers/net/phy/micrel.c:372:39: error: array type has incomplete element type static const struct ksz90x1_reg_field ksz9031_clk_grp[] = ^ drivers/net/phy/micrel.c: In function ‘ksz9031_of_config’: drivers/net/phy/micrel.c:377:23: error: array type has incomplete element type struct ksz90x1_ofcfg ofcfg[] = { ^ drivers/net/phy/micrel.c:379:13: error: ‘ksz90x1_rxd_grp’ undeclared (first use in this function) { MII_KSZ9031_EXT_RGMII_RX_DATA_SKEW, 2, ksz90x1_rxd_grp, 4 }, ^ drivers/net/phy/micrel.c:379:13: note: each undeclared identifier is reported only once for each function it appears in drivers/net/phy/micrel.c:380:13: error: ‘ksz90x1_txd_grp’ undeclared (first use in this function) { MII_KSZ9031_EXT_RGMII_TX_DATA_SKEW, 2, ksz90x1_txd_grp, 4 }, ^ drivers/net/phy/micrel.c:386:3: warning: implicit declaration of function ‘ksz90x1_of_config_group’ [-Wimplicit-function-declaration] ret = ksz90x1_of_config_group(phydev, &(ofcfg[i])); ^ drivers/net/phy/micrel.c:377:23: warning: unused variable ‘ofcfg’ [-Wunused-variable] struct ksz90x1_ofcfg ofcfg[] = { ^ drivers/net/phy/micrel.c: At top level: drivers/net/phy/micrel.c:370:39: warning: ‘ksz9031_ctl_grp’ defined but not used [-Wunused-variable] static const struct ksz90x1_reg_field ksz9031_ctl_grp[] = ^ drivers/net/phy/micrel.c:372:39: warning: ‘ksz9031_clk_grp’ defined but not used [-Wunused-variable] static const struct ksz90x1_reg_field ksz9031_clk_grp[] = ^ scripts/Makefile.build:277: recipe for target 'drivers/net/phy/micrel.o' failed make[1]: *** [drivers/net/phy/micrel.o] Error 1 Makefile:1201: recipe for target 'drivers/net/phy' failed make: *** [drivers/net/phy] Error 2 make: *** Waiting for unfinished jobs.... Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-02-02 10:21:32 +00:00
#if defined(CONFIG_DM_ETH) && (defined(CONFIG_PHY_MICREL_KSZ9021) || \
defined(CONFIG_PHY_MICREL_KSZ9031))
static const struct ksz90x1_reg_field ksz9031_ctl_grp[] =
{ { "txen-skew-ps", 4, 0, 0x7 }, { "rxdv-skew-ps", 4, 4, 0x7 } };
static const struct ksz90x1_reg_field ksz9031_clk_grp[] =
{ { "rxc-skew-ps", 5, 0, 0xf }, { "txc-skew-ps", 5, 5, 0xf } };
static int ksz9031_of_config(struct phy_device *phydev)
{
struct ksz90x1_ofcfg ofcfg[] = {
{ MII_KSZ9031_EXT_RGMII_CTRL_SIG_SKEW, 2, ksz9031_ctl_grp, 2 },
{ MII_KSZ9031_EXT_RGMII_RX_DATA_SKEW, 2, ksz90x1_rxd_grp, 4 },
{ MII_KSZ9031_EXT_RGMII_TX_DATA_SKEW, 2, ksz90x1_txd_grp, 4 },
{ MII_KSZ9031_EXT_RGMII_CLOCK_SKEW, 2, ksz9031_clk_grp, 2 },
};
int i, ret = 0;
for (i = 0; i < ARRAY_SIZE(ofcfg); i++)
ret = ksz90x1_of_config_group(phydev, &(ofcfg[i]));
if (ret)
return ret;
return 0;
}
#else
static int ksz9031_of_config(struct phy_device *phydev)
{
return 0;
}
#endif
/* Accessors to extended registers*/
int ksz9031_phy_extended_write(struct phy_device *phydev,
int devaddr, int regnum, u16 mode, u16 val)
{
/*select register addr for mmd*/
phy_write(phydev, MDIO_DEVAD_NONE,
MII_KSZ9031_MMD_ACCES_CTRL, devaddr);
/*select register for mmd*/
phy_write(phydev, MDIO_DEVAD_NONE,
MII_KSZ9031_MMD_REG_DATA, regnum);
/*setup mode*/
phy_write(phydev, MDIO_DEVAD_NONE,
MII_KSZ9031_MMD_ACCES_CTRL, (mode | devaddr));
/*write the value*/
return phy_write(phydev, MDIO_DEVAD_NONE,
MII_KSZ9031_MMD_REG_DATA, val);
}
int ksz9031_phy_extended_read(struct phy_device *phydev, int devaddr,
int regnum, u16 mode)
{
phy_write(phydev, MDIO_DEVAD_NONE,
MII_KSZ9031_MMD_ACCES_CTRL, devaddr);
phy_write(phydev, MDIO_DEVAD_NONE,
MII_KSZ9031_MMD_REG_DATA, regnum);
phy_write(phydev, MDIO_DEVAD_NONE,
MII_KSZ9031_MMD_ACCES_CTRL, (devaddr | mode));
return phy_read(phydev, MDIO_DEVAD_NONE, MII_KSZ9031_MMD_REG_DATA);
}
static int ksz9031_phy_extread(struct phy_device *phydev, int addr, int devaddr,
int regnum)
{
return ksz9031_phy_extended_read(phydev, devaddr, regnum,
MII_KSZ9031_MOD_DATA_NO_POST_INC);
};
static int ksz9031_phy_extwrite(struct phy_device *phydev, int addr,
int devaddr, int regnum, u16 val)
{
return ksz9031_phy_extended_write(phydev, devaddr, regnum,
MII_KSZ9031_MOD_DATA_POST_INC_RW, val);
};
static int ksz9031_config(struct phy_device *phydev)
{
int ret;
ret = ksz9031_of_config(phydev);
if (ret)
return ret;
return genphy_config(phydev);
}
static struct phy_driver ksz9031_driver = {
.name = "Micrel ksz9031",
.uid = 0x221620,
.mask = 0xfffff0,
.features = PHY_GBIT_FEATURES,
.config = &ksz9031_config,
.startup = &ksz90xx_startup,
.shutdown = &genphy_shutdown,
.writeext = &ksz9031_phy_extwrite,
.readext = &ksz9031_phy_extread,
};
int ksz886x_config(struct phy_device *phydev)
{
/* we are connected directly to the switch without
* dedicated PHY. */
phydev->link = 1;
phydev->duplex = DUPLEX_FULL;
phydev->speed = SPEED_100;
return 0;
}
static int ksz886x_startup(struct phy_device *phydev)
{
return 0;
}
static struct phy_driver ksz886x_driver = {
.name = "Micrel KSZ886x Switch",
.uid = 0x00221430,
.mask = 0xfffff0,
.features = PHY_BASIC_FEATURES,
.config = &ksz886x_config,
.startup = &ksz886x_startup,
.shutdown = &genphy_shutdown,
};
int phy_micrel_init(void)
{
phy_register(&KSZ804_driver);
phy_register(&KSZ8031_driver);
phy_register(&KSZ8051_driver);
phy_register(&KSZ8081_driver);
#ifdef CONFIG_PHY_MICREL_KSZ9021
phy_register(&ksz9021_driver);
#else
phy_register(&KS8721_driver);
#endif
phy_register(&ksz9031_driver);
phy_register(&ksz8895_driver);
phy_register(&ksz886x_driver);
return 0;
}