u-boot/include/ppc_asm.tmpl

287 lines
6.9 KiB
Cheetah
Raw Normal View History

/* SPDX-License-Identifier: GPL-2.0+ */
2002-08-20 21:10:12 +00:00
/*
* (C) Copyright 2000-2002
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*/
/*
* This file contains all the macros and symbols which define
* a PowerPC assembly language environment.
*/
#ifndef __PPC_ASM_TMPL__
#define __PPC_ASM_TMPL__
#include <config.h>
2002-08-20 21:10:12 +00:00
/***************************************************************************
*
* These definitions simplify the ugly declarations necessary for GOT
* definitions.
*
* Stolen from prepboot/bootldr.h, (C) 1998 Gabriel Paubert, paubert@iram.es
*
* Uses r12 to access the GOT
2002-08-20 21:10:12 +00:00
*/
#define START_GOT \
.section ".got2","aw"; \
.LCTOC1 = .+32768
#define END_GOT \
.text
#define GET_GOT \
bl 1f ; \
.text 2 ; \
0: .long .LCTOC1-1f ; \
.text ; \
1: mflr r12 ; \
lwz r0,0b-1b(r12) ; \
add r12,r0,r12 ;
2002-08-20 21:10:12 +00:00
#define GOT_ENTRY(NAME) .L_ ## NAME = . - .LCTOC1 ; .long NAME
#define GOT(NAME) .L_ ## NAME (r12)
2002-08-20 21:10:12 +00:00
/***************************************************************************
* Register names
*/
#define r0 0
#define r1 1
#define r2 2
#define r3 3
#define r4 4
#define r5 5
#define r6 6
#define r7 7
#define r8 8
#define r9 9
#define r10 10
#define r11 11
#define r12 12
#define r13 13
#define r14 14
#define r15 15
#define r16 16
#define r17 17
#define r18 18
#define r19 19
#define r20 20
#define r21 21
#define r22 22
#define r23 23
#define r24 24
#define r25 25
#define r26 26
#define r27 27
#define r28 28
#define r29 29
#define r30 30
#define r31 31
#if defined(CONFIG_MPC8xx)
powerpc: Partialy restore core of mpc8xx CS Systemes d'Information (CSSI) manufactures 8xx boards for critical communication systems. Those boards have been running U-Boot since 2010 and will have to be maintained until at least 2027. commit 5b8e76c35ec312a3f73126bd1a2d2c0965b98a9f ("powerpc, 8xx: remove support for 8xx") orphaned those boards by removing support for the mpc8xx CPU. This commit partially restores support for the 8xx, with the following limitations: - Restores support for MPC866 and MPC885 only - Does not restore IDE, PCMCIA, I2C, USB - Does not restore examples - Does not restore POST - Does not restore Ethernet on SCC - Does not restore console on SCC - Does not restore bedbug and kgdb support As the 866 and 885 do not support the following features, they are not restored either: - VIDEO / LCD - RTC clock The CPM uCODE patch is not restored either, because: - 866 and 885 already have support for I2C and SPI relocation without a uCODE patch - relocation of SMC, I2C or SPI is only needed for using SCCs for Ethernet or QMC The dynamic setup/calculation of clocks is removed, we expect the target being use with the clock and PLPRCR register defined in the configuration. All the clock settings for 8xx prior to 866 is removed as well as we now only support 866 and 885. This code is mature and addresses mature boards. Therefore all code enclosed in '#if 0/#endif' and '#if XX_DEBUG/#endif' is unneeded. The following files are not restored by this patch: - arch/powerpc/cpu/mpc8xx/bedbug_860.c - arch/powerpc/cpu/mpc8xx/fec.h - arch/powerpc/cpu/mpc8xx/kgdb.S - arch/powerpc/cpu/mpc8xx/plprcr_write.S - arch/powerpc/cpu/mpc8xx/scc.c - arch/powerpc/cpu/mpc8xx/upatch.c - arch/powerpc/cpu/mpc8xx/video.c - arch/powerpc/include/asm/status_led.h - arch/powerpc/lib/ide.c - arch/powerpc/lib/ide.h - doc/README.MPC866 - drivers/pcmcia/mpc8xx_pcmcia.c - drivers/rtc/mpc8xx.c - drivers/usb/gadget/mpc8xx_udc.c - drivers/video/mpc8xx_lcd.c - examples/standalone/test_burst.c - examples/standalone/test_burst.h - examples/standalone/test_burst_lib.S - examples/standalone/timer.c - include/mpc823_lcd.h - include/usb/mpc8xx_udc.h - post/cpu/mpc8xx/Makefile - post/cpu/mpc8xx/cache.c - post/cpu/mpc8xx/cache_8xx.S - post/cpu/mpc8xx/ether.c - post/cpu/mpc8xx/spr.c - post/cpu/mpc8xx/uart.c - post/cpu/mpc8xx/usb.c - post/cpu/mpc8xx/watchdog.c Some of the restored files are not located in a proper location. In order to keep traceability of the changes, they will be moved to their correct location and moved to Kconfig in a followup patch. This patch also declares CSSI as point of contact for the update of the 8xx platform, as those boards are the only ones still being maintained on the 8xx area. A later patch will add those boards to the tree. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
2017-07-06 08:23:22 +00:00
/* Some special registers */
#define ICR 148 /* Interrupt Cause Register (37-44) */
#define DER 149
#define COUNTA 150 /* Breakpoint Counter (37-44) */
#define COUNTB 151 /* Breakpoint Counter (37-44) */
#define LCTRL1 156 /* Load/Store Support (37-40) */
#define LCTRL2 157 /* Load/Store Support (37-41) */
#define ICTRL 158
#endif /* CONFIG_MPC8xx */
powerpc: Partialy restore core of mpc8xx CS Systemes d'Information (CSSI) manufactures 8xx boards for critical communication systems. Those boards have been running U-Boot since 2010 and will have to be maintained until at least 2027. commit 5b8e76c35ec312a3f73126bd1a2d2c0965b98a9f ("powerpc, 8xx: remove support for 8xx") orphaned those boards by removing support for the mpc8xx CPU. This commit partially restores support for the 8xx, with the following limitations: - Restores support for MPC866 and MPC885 only - Does not restore IDE, PCMCIA, I2C, USB - Does not restore examples - Does not restore POST - Does not restore Ethernet on SCC - Does not restore console on SCC - Does not restore bedbug and kgdb support As the 866 and 885 do not support the following features, they are not restored either: - VIDEO / LCD - RTC clock The CPM uCODE patch is not restored either, because: - 866 and 885 already have support for I2C and SPI relocation without a uCODE patch - relocation of SMC, I2C or SPI is only needed for using SCCs for Ethernet or QMC The dynamic setup/calculation of clocks is removed, we expect the target being use with the clock and PLPRCR register defined in the configuration. All the clock settings for 8xx prior to 866 is removed as well as we now only support 866 and 885. This code is mature and addresses mature boards. Therefore all code enclosed in '#if 0/#endif' and '#if XX_DEBUG/#endif' is unneeded. The following files are not restored by this patch: - arch/powerpc/cpu/mpc8xx/bedbug_860.c - arch/powerpc/cpu/mpc8xx/fec.h - arch/powerpc/cpu/mpc8xx/kgdb.S - arch/powerpc/cpu/mpc8xx/plprcr_write.S - arch/powerpc/cpu/mpc8xx/scc.c - arch/powerpc/cpu/mpc8xx/upatch.c - arch/powerpc/cpu/mpc8xx/video.c - arch/powerpc/include/asm/status_led.h - arch/powerpc/lib/ide.c - arch/powerpc/lib/ide.h - doc/README.MPC866 - drivers/pcmcia/mpc8xx_pcmcia.c - drivers/rtc/mpc8xx.c - drivers/usb/gadget/mpc8xx_udc.c - drivers/video/mpc8xx_lcd.c - examples/standalone/test_burst.c - examples/standalone/test_burst.h - examples/standalone/test_burst_lib.S - examples/standalone/timer.c - include/mpc823_lcd.h - include/usb/mpc8xx_udc.h - post/cpu/mpc8xx/Makefile - post/cpu/mpc8xx/cache.c - post/cpu/mpc8xx/cache_8xx.S - post/cpu/mpc8xx/ether.c - post/cpu/mpc8xx/spr.c - post/cpu/mpc8xx/uart.c - post/cpu/mpc8xx/usb.c - post/cpu/mpc8xx/watchdog.c Some of the restored files are not located in a proper location. In order to keep traceability of the changes, they will be moved to their correct location and moved to Kconfig in a followup patch. This patch also declares CSSI as point of contact for the update of the 8xx platform, as those boards are the only ones still being maintained on the 8xx area. A later patch will add those boards to the tree. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
2017-07-06 08:23:22 +00:00
#if defined(CONFIG_MPC8xx)
powerpc: Partialy restore core of mpc8xx CS Systemes d'Information (CSSI) manufactures 8xx boards for critical communication systems. Those boards have been running U-Boot since 2010 and will have to be maintained until at least 2027. commit 5b8e76c35ec312a3f73126bd1a2d2c0965b98a9f ("powerpc, 8xx: remove support for 8xx") orphaned those boards by removing support for the mpc8xx CPU. This commit partially restores support for the 8xx, with the following limitations: - Restores support for MPC866 and MPC885 only - Does not restore IDE, PCMCIA, I2C, USB - Does not restore examples - Does not restore POST - Does not restore Ethernet on SCC - Does not restore console on SCC - Does not restore bedbug and kgdb support As the 866 and 885 do not support the following features, they are not restored either: - VIDEO / LCD - RTC clock The CPM uCODE patch is not restored either, because: - 866 and 885 already have support for I2C and SPI relocation without a uCODE patch - relocation of SMC, I2C or SPI is only needed for using SCCs for Ethernet or QMC The dynamic setup/calculation of clocks is removed, we expect the target being use with the clock and PLPRCR register defined in the configuration. All the clock settings for 8xx prior to 866 is removed as well as we now only support 866 and 885. This code is mature and addresses mature boards. Therefore all code enclosed in '#if 0/#endif' and '#if XX_DEBUG/#endif' is unneeded. The following files are not restored by this patch: - arch/powerpc/cpu/mpc8xx/bedbug_860.c - arch/powerpc/cpu/mpc8xx/fec.h - arch/powerpc/cpu/mpc8xx/kgdb.S - arch/powerpc/cpu/mpc8xx/plprcr_write.S - arch/powerpc/cpu/mpc8xx/scc.c - arch/powerpc/cpu/mpc8xx/upatch.c - arch/powerpc/cpu/mpc8xx/video.c - arch/powerpc/include/asm/status_led.h - arch/powerpc/lib/ide.c - arch/powerpc/lib/ide.h - doc/README.MPC866 - drivers/pcmcia/mpc8xx_pcmcia.c - drivers/rtc/mpc8xx.c - drivers/usb/gadget/mpc8xx_udc.c - drivers/video/mpc8xx_lcd.c - examples/standalone/test_burst.c - examples/standalone/test_burst.h - examples/standalone/test_burst_lib.S - examples/standalone/timer.c - include/mpc823_lcd.h - include/usb/mpc8xx_udc.h - post/cpu/mpc8xx/Makefile - post/cpu/mpc8xx/cache.c - post/cpu/mpc8xx/cache_8xx.S - post/cpu/mpc8xx/ether.c - post/cpu/mpc8xx/spr.c - post/cpu/mpc8xx/uart.c - post/cpu/mpc8xx/usb.c - post/cpu/mpc8xx/watchdog.c Some of the restored files are not located in a proper location. In order to keep traceability of the changes, they will be moved to their correct location and moved to Kconfig in a followup patch. This patch also declares CSSI as point of contact for the update of the 8xx platform, as those boards are the only ones still being maintained on the 8xx area. A later patch will add those boards to the tree. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
2017-07-06 08:23:22 +00:00
/* Registers in the processor's internal memory map that we use.
*/
#define SYPCR 0x00000004
#define BR0 0x00000100
#define OR0 0x00000104
#define BR1 0x00000108
#define OR1 0x0000010c
#define BR2 0x00000110
#define OR2 0x00000114
#define BR3 0x00000118
#define OR3 0x0000011c
#define BR4 0x00000120
#define OR4 0x00000124
#define MAR 0x00000164
#define MCR 0x00000168
#define MAMR 0x00000170
#define MBMR 0x00000174
#define MSTAT 0x00000178
#define MPTPR 0x0000017a
#define MDR 0x0000017c
#define TBSCR 0x00000200
#define TBREFF0 0x00000204
#define PLPRCR 0x00000284
#endif
2002-08-20 21:10:12 +00:00
#define curptr r2
#define SYNC \
sync; \
isync
/*
* Macros for storing registers into and loading registers from
* exception frames.
*/
#define SAVE_GPR(n, base) stw n,GPR0+4*(n)(base)
#define SAVE_2GPRS(n, base) SAVE_GPR(n, base); SAVE_GPR(n+1, base)
#define SAVE_4GPRS(n, base) SAVE_2GPRS(n, base); SAVE_2GPRS(n+2, base)
#define SAVE_8GPRS(n, base) SAVE_4GPRS(n, base); SAVE_4GPRS(n+4, base)
#define SAVE_10GPRS(n, base) SAVE_8GPRS(n, base); SAVE_2GPRS(n+8, base)
#define REST_GPR(n, base) lwz n,GPR0+4*(n)(base)
#define REST_2GPRS(n, base) REST_GPR(n, base); REST_GPR(n+1, base)
#define REST_4GPRS(n, base) REST_2GPRS(n, base); REST_2GPRS(n+2, base)
#define REST_8GPRS(n, base) REST_4GPRS(n, base); REST_4GPRS(n+4, base)
#define REST_10GPRS(n, base) REST_8GPRS(n, base); REST_2GPRS(n+8, base)
/*
* GCC sometimes accesses words at negative offsets from the stack
* pointer, although the SysV ABI says it shouldn't. To cope with
* this, we leave this much untouched space on the stack on exception
* entry.
*/
#define STACK_UNDERHEAD 64
/*
* Exception entry code. This code runs with address translation
* turned off, i.e. using physical addresses.
* We assume sprg3 has the physical address of the current
* task's thread_struct.
*/
#define EXCEPTION_PROLOG(reg1, reg2) \
2002-08-20 21:10:12 +00:00
mtspr SPRG0,r20; \
mtspr SPRG1,r21; \
mfcr r20; \
subi r21,r1,INT_FRAME_SIZE+STACK_UNDERHEAD; /* alloc exc. frame */\
stw r20,_CCR(r21); /* save registers */ \
stw r22,GPR22(r21); \
stw r23,GPR23(r21); \
mfspr r20,SPRG0; \
stw r20,GPR20(r21); \
mfspr r22,SPRG1; \
stw r22,GPR21(r21); \
mflr r20; \
stw r20,_LINK(r21); \
mfctr r22; \
stw r22,_CTR(r21); \
mfspr r20,XER; \
stw r20,_XER(r21); \
mfspr r20, DAR_DEAR; \
stw r20,_DAR(r21); \
mfspr r22,reg1; \
mfspr r23,reg2; \
2002-08-20 21:10:12 +00:00
stw r0,GPR0(r21); \
stw r1,GPR1(r21); \
stw r2,GPR2(r21); \
stw r1,0(r21); \
mr r1,r21; /* set new kernel sp */ \
SAVE_4GPRS(3, r21);
/*
* Note: code which follows this uses cr0.eq (set if from kernel),
* r21, r22 (SRR0), and r23 (SRR1).
*/
/*
* Exception vectors.
*
* The data words for `hdlr' and `int_return' are initialized with
* OFFSET values only; they must be relocated first before they can
* be used!
*/
#define COPY_EE(d, s) rlwimi d,s,0,16,16
#define NOCOPY(d, s)
#ifdef CONFIG_E500
#define EXC_XFER_TEMPLATE(n, label, hdlr, msr, copyee) \
stw r22,_NIP(r21); \
stw r23,_MSR(r21); \
li r23,n; \
stw r23,TRAP(r21); \
li r20,msr; \
copyee(r20,r23); \
rlwimi r20,r23,0,25,25; \
mtmsr r20; \
bl 1f; \
1: mflr r23; \
addis r23,r23,(hdlr - 1b)@ha; \
addi r23,r23,(hdlr - 1b)@l; \
b transfer_to_handler
#define STD_EXCEPTION(n, label, hdlr) \
.align 4; \
label: \
EXCEPTION_PROLOG(SRR0, SRR1); \
addi r3,r1,STACK_FRAME_OVERHEAD; \
EXC_XFER_TEMPLATE(n, label, hdlr, MSR_KERNEL, NOCOPY) \
#define CRIT_EXCEPTION(n, label, hdlr) \
.align 4; \
label: \
EXCEPTION_PROLOG(CSRR0, CSRR1); \
addi r3,r1,STACK_FRAME_OVERHEAD; \
EXC_XFER_TEMPLATE(n, label, hdlr, \
MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE), NOCOPY) \
#define MCK_EXCEPTION(n, label, hdlr) \
.align 4; \
label: \
EXCEPTION_PROLOG(MCSRR0, MCSRR1); \
addi r3,r1,STACK_FRAME_OVERHEAD; \
EXC_XFER_TEMPLATE(n, label, hdlr, \
MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE), NOCOPY) \
#else /* !E500 */
#define EXC_XFER_TEMPLATE(label, hdlr, msr, copyee) \
bl 1f; \
1: mflr r20; \
lwz r20,(.L_ ## label)-1b+8(r20); \
mtlr r20; \
li r20,msr; \
copyee(r20,r23); \
2002-08-20 21:10:12 +00:00
rlwimi r20,r23,0,25,25; \
blrl; \
2002-08-20 21:10:12 +00:00
.L_ ## label : \
.long hdlr - _start + _START_OFFSET; \
.long int_return - _start + _START_OFFSET; \
.long transfer_to_handler - _start + _START_OFFSET
#define STD_EXCEPTION(n, label, hdlr) \
. = n; \
label: \
EXCEPTION_PROLOG(SRR0, SRR1); \
addi r3,r1,STACK_FRAME_OVERHEAD; \
EXC_XFER_TEMPLATE(label, hdlr, MSR_KERNEL, NOCOPY) \
#define CRIT_EXCEPTION(n, label, hdlr) \
. = n; \
label: \
EXCEPTION_PROLOG(CSRR0, CSRR1); \
addi r3,r1,STACK_FRAME_OVERHEAD; \
EXC_XFER_TEMPLATE(label, hdlr, \
MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE), NOCOPY) \
#define MCK_EXCEPTION(n, label, hdlr) \
. = n; \
label: \
EXCEPTION_PROLOG(MCSRR0, MCSRR1); \
addi r3,r1,STACK_FRAME_OVERHEAD; \
EXC_XFER_TEMPLATE(label, hdlr, \
MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE), NOCOPY) \
2002-08-20 21:10:12 +00:00
#endif /* !E500 */
2002-08-20 21:10:12 +00:00
#endif /* __PPC_ASM_TMPL__ */