2018-05-06 21:58:06 +00:00
|
|
|
/* SPDX-License-Identifier: GPL-2.0+ */
|
powerpc/t1024qds: Add T1024 QDS board support
T1024QDS is a high-performance computing evaluation, development and
test platform for T1024 QorIQ Power Architecture processor.
T1024QDS board Overview
-----------------------
- T1024 SoC integrating two 64-bit e5500 cores up to 1.4GHz
- CoreNet fabric supporting coherent and noncoherent transactions with
prioritization and bandwidth allocation
- 32-/64-bit DDR3L/DDR4 SDRAM memory controller with ECC and interleaving support
- Accelerator: DPAA components consist of FMan, BMan, QMan, DCE and SEC
- Ethernet interfaces:
- Two 10M/100M/1G RGMII ports on-board
- Three 1G/2.5Gbps SGMII ports
- Four 1Gbps QSGMII ports
- one 10Gbps XFI or 10Base-KR interface
- SerDes: 4 lanes up to 10.3125GHz Supporting SGMII/QSGMII, XFI, PCIe, SATA and Aurora
- PCIe: Three PCI Express controllers with five PCIe slots.
- IFC: 128MB NOR Flash, 2GB NAND Flash, PromJet debug port and Qixis FPGA
- Video: DIU supports video up to 1280x1024x32 bpp.
- Chrontel CH7201 for HDMI connection.
- TI DS90C387R for direct LCD connection.
- Raw (not encoded) video connector for testing or other encoders.
- QUICC Engine block
- 32-bit RISC controller for flexible support of the communications peripherals
- Serial DMA channel for receive and transmit on all serial channels
- Two universal communication controllers, supporting TDM, HDLC, and UART
- Deep Sleep power implementaion (wakeup from GPIO/Timer/Ethernet/USB)
- eSPI: Three SPI flash devices.
- SATA: one SATA 2.O.
- USB: Two USB2.0 ports with internal PHY (one Type-A + one micro Type mini-AB)
- eSDHC: Support SD, SDHC, SDXC and MMC/eMMC.
- I2C: Four I2C controllers.
- UART: Two UART on board.
Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
[York Sun: Fix ft_board_setup() type, fix MAINTAINERS for SECURE_BOOT
Fix Kconfig by adding SUPPORT_SPL]
Reviewed-by: York Sun <yorksun@freescale.com>
2014-11-24 09:11:55 +00:00
|
|
|
/*
|
|
|
|
* Copyright 2014 Freescale Semiconductor, Inc.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#ifndef __T1024QDS_QIXIS_H__
|
|
|
|
#define __T1024QDS_QIXIS_H__
|
|
|
|
|
|
|
|
/* Definitions of QIXIS Registers for T1024/T1023 QDS */
|
|
|
|
|
|
|
|
/* BRDCFG4[4:7]] select EC1 and EC2 as a pair */
|
|
|
|
#define BRDCFG4_EMISEL_MASK 0xE0
|
|
|
|
#define BRDCFG4_EMISEL_SHIFT 5
|
|
|
|
|
|
|
|
/* BRDCFG5[0:1] controls routing and use of I2C3 & I2C4 ports*/
|
|
|
|
#define BRDCFG5_IMX_MASK 0xC0
|
|
|
|
#define BRDCFG5_IMX_DIU 0x80
|
|
|
|
|
2014-11-24 09:11:58 +00:00
|
|
|
#define BRDCFG5_SPIRTE_MASK 0x07
|
|
|
|
#define BRDCFG5_SPIRTE_TDM 0x01
|
|
|
|
#define BRDCFG5_SPIRTE_SDHC 0x02
|
powerpc/t1024qds: Add T1024 QDS board support
T1024QDS is a high-performance computing evaluation, development and
test platform for T1024 QorIQ Power Architecture processor.
T1024QDS board Overview
-----------------------
- T1024 SoC integrating two 64-bit e5500 cores up to 1.4GHz
- CoreNet fabric supporting coherent and noncoherent transactions with
prioritization and bandwidth allocation
- 32-/64-bit DDR3L/DDR4 SDRAM memory controller with ECC and interleaving support
- Accelerator: DPAA components consist of FMan, BMan, QMan, DCE and SEC
- Ethernet interfaces:
- Two 10M/100M/1G RGMII ports on-board
- Three 1G/2.5Gbps SGMII ports
- Four 1Gbps QSGMII ports
- one 10Gbps XFI or 10Base-KR interface
- SerDes: 4 lanes up to 10.3125GHz Supporting SGMII/QSGMII, XFI, PCIe, SATA and Aurora
- PCIe: Three PCI Express controllers with five PCIe slots.
- IFC: 128MB NOR Flash, 2GB NAND Flash, PromJet debug port and Qixis FPGA
- Video: DIU supports video up to 1280x1024x32 bpp.
- Chrontel CH7201 for HDMI connection.
- TI DS90C387R for direct LCD connection.
- Raw (not encoded) video connector for testing or other encoders.
- QUICC Engine block
- 32-bit RISC controller for flexible support of the communications peripherals
- Serial DMA channel for receive and transmit on all serial channels
- Two universal communication controllers, supporting TDM, HDLC, and UART
- Deep Sleep power implementaion (wakeup from GPIO/Timer/Ethernet/USB)
- eSPI: Three SPI flash devices.
- SATA: one SATA 2.O.
- USB: Two USB2.0 ports with internal PHY (one Type-A + one micro Type mini-AB)
- eSDHC: Support SD, SDHC, SDXC and MMC/eMMC.
- I2C: Four I2C controllers.
- UART: Two UART on board.
Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
[York Sun: Fix ft_board_setup() type, fix MAINTAINERS for SECURE_BOOT
Fix Kconfig by adding SUPPORT_SPL]
Reviewed-by: York Sun <yorksun@freescale.com>
2014-11-24 09:11:55 +00:00
|
|
|
#define BRDCFG9_XFI_TX_DISABLE 0x10
|
|
|
|
|
|
|
|
/* BRDCFG13[0:5] TDM configuration and setup */
|
|
|
|
#define BRDCFG13_TDM_MASK 0xfc
|
|
|
|
#define BRDCFG13_TDM_INTERFACE 0x37
|
|
|
|
#define BRDCFG13_HDLC_LOOPBACK 0x29
|
|
|
|
#define BRDCFG13_TDM_LOOPBACK 0x31
|
|
|
|
|
|
|
|
/* BRDCFG15[3] controls LCD Panel Powerdown */
|
|
|
|
#define BRDCFG15_LCDFM 0x20
|
|
|
|
#define BRDCFG15_LCDPD 0x10
|
|
|
|
#define BRDCFG15_LCDPD_MASK 0x10
|
|
|
|
#define BRDCFG15_LCDPD_ENABLED 0x00
|
|
|
|
|
|
|
|
/* BRDCFG15[6:7] controls DIU MUX selction*/
|
|
|
|
#define BRDCFG15_DIUSEL_MASK 0x03
|
|
|
|
#define BRDCFG15_DIUSEL_HDMI 0x00
|
|
|
|
#define BRDCFG15_DIUSEL_LCD 0x01
|
2014-11-24 09:11:58 +00:00
|
|
|
#define BRDCFG15_DIUSEL_UCC 0x02
|
|
|
|
#define BRDCFG15_DIUSEL_TDM 0x03
|
powerpc/t1024qds: Add T1024 QDS board support
T1024QDS is a high-performance computing evaluation, development and
test platform for T1024 QorIQ Power Architecture processor.
T1024QDS board Overview
-----------------------
- T1024 SoC integrating two 64-bit e5500 cores up to 1.4GHz
- CoreNet fabric supporting coherent and noncoherent transactions with
prioritization and bandwidth allocation
- 32-/64-bit DDR3L/DDR4 SDRAM memory controller with ECC and interleaving support
- Accelerator: DPAA components consist of FMan, BMan, QMan, DCE and SEC
- Ethernet interfaces:
- Two 10M/100M/1G RGMII ports on-board
- Three 1G/2.5Gbps SGMII ports
- Four 1Gbps QSGMII ports
- one 10Gbps XFI or 10Base-KR interface
- SerDes: 4 lanes up to 10.3125GHz Supporting SGMII/QSGMII, XFI, PCIe, SATA and Aurora
- PCIe: Three PCI Express controllers with five PCIe slots.
- IFC: 128MB NOR Flash, 2GB NAND Flash, PromJet debug port and Qixis FPGA
- Video: DIU supports video up to 1280x1024x32 bpp.
- Chrontel CH7201 for HDMI connection.
- TI DS90C387R for direct LCD connection.
- Raw (not encoded) video connector for testing or other encoders.
- QUICC Engine block
- 32-bit RISC controller for flexible support of the communications peripherals
- Serial DMA channel for receive and transmit on all serial channels
- Two universal communication controllers, supporting TDM, HDLC, and UART
- Deep Sleep power implementaion (wakeup from GPIO/Timer/Ethernet/USB)
- eSPI: Three SPI flash devices.
- SATA: one SATA 2.O.
- USB: Two USB2.0 ports with internal PHY (one Type-A + one micro Type mini-AB)
- eSDHC: Support SD, SDHC, SDXC and MMC/eMMC.
- I2C: Four I2C controllers.
- UART: Two UART on board.
Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
[York Sun: Fix ft_board_setup() type, fix MAINTAINERS for SECURE_BOOT
Fix Kconfig by adding SUPPORT_SPL]
Reviewed-by: York Sun <yorksun@freescale.com>
2014-11-24 09:11:55 +00:00
|
|
|
|
|
|
|
/* SYSCLK */
|
|
|
|
#define QIXIS_SYSCLK_66 0x0
|
|
|
|
#define QIXIS_SYSCLK_83 0x1
|
|
|
|
#define QIXIS_SYSCLK_100 0x2
|
|
|
|
#define QIXIS_SYSCLK_125 0x3
|
|
|
|
#define QIXIS_SYSCLK_133 0x4
|
|
|
|
#define QIXIS_SYSCLK_150 0x5
|
|
|
|
#define QIXIS_SYSCLK_160 0x6
|
|
|
|
#define QIXIS_SYSCLK_166 0x7
|
|
|
|
#define QIXIS_SYSCLK_64 0x8
|
|
|
|
|
|
|
|
/* DDRCLK */
|
|
|
|
#define QIXIS_DDRCLK_66 0x0
|
|
|
|
#define QIXIS_DDRCLK_100 0x1
|
|
|
|
#define QIXIS_DDRCLK_125 0x2
|
|
|
|
#define QIXIS_DDRCLK_133 0x3
|
|
|
|
|
|
|
|
|
|
|
|
#define QIXIS_SRDS1CLK_122 0x5a
|
|
|
|
#define QIXIS_SRDS1CLK_125 0x5e
|
|
|
|
#endif
|