u-boot/configs/chiliboard_defconfig

CONFIG_ARM=y
CONFIG_ARCH_OMAP2PLUS=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_AM33XX=y
CONFIG_TARGET_CHILIBOARD=y
CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_SPL_NAND_SUPPORT=y
CONFIG_SPL_WATCHDOG_SUPPORT=y
CONFIG_SPL_STACK_R_ADDR=0x82000000
CONFIG_SPL_FAT_SUPPORT=y
CONFIG_ENV_IS_IN_MMC=y
CONFIG_BOOTDELAY=1
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_SPL=y
CONFIG_SPL_STACK_R=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_POWER_SUPPORT=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
# CONFIG_CMD_IMLS is not set
CONFIG_CMD_ASKENV=y
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_NAND=y
CONFIG_CMD_USB=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_EXT4=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
CONFIG_CMD_MTDPARTS=y
CONFIG_DM_GPIO=y
CONFIG_MMC_OMAP_HS=y
CONFIG_NAND=y
CONFIG_PHYLIB=y
CONFIG_SYS_NS16550=y
CONFIG_OMAP3_SPI=y
CONFIG_USB=y
CONFIG_USB_MUSB_HOST=y
CONFIG_USB_STORAGE=y
CONFIG_FAT_WRITE=y
CONFIG_LZO=y
CONFIG_OF_LIBFDT=y
board/chiliboard: Add support for chiliBoard chiliBoard is a development board which uses chiliSOM as its base. Hardware specification: * chiliSOM (TI AM335x, DRAM, NAND) * Ethernet PHY (id 0) * USB host (usb1) * MicroSD slot (mmc0) Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com> Reviewed-by: Tom Rini <trini@konsulko.com> 2017-01-25 08:53:08 +00:00			`CONFIG_ARM=y`
ARM: omap2+: rename config to ARCH_OMAP2PLUS and consolidate Kconfig In Linux, CONFIG_ARCH_OMAP2PLUS is used for OMAP2 or later SoCs. Rename CONFIG_ARCH_OMAP2 to CONFIG_ARCH_OMAP2PLUS to follow this naming. Move the OMAP2+ board/SoC choice down to mach-omap2/Kconfig to slim down the arch/arm/Kconfig level. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Tom Rini <trini@konsulko.com> 2017-04-25 04:10:11 +00:00			`CONFIG_ARCH_OMAP2PLUS=y`
board/chiliboard: Add support for chiliBoard chiliBoard is a development board which uses chiliSOM as its base. Hardware specification: * chiliSOM (TI AM335x, DRAM, NAND) * Ethernet PHY (id 0) * USB host (usb1) * MicroSD slot (mmc0) Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com> Reviewed-by: Tom Rini <trini@konsulko.com> 2017-01-25 08:53:08 +00:00			`CONFIG_SPL_LIBCOMMON_SUPPORT=y`
			`CONFIG_SPL_LIBGENERIC_SUPPORT=y`
ARM: omap2+: rename config to ARCH_OMAP2PLUS and consolidate Kconfig In Linux, CONFIG_ARCH_OMAP2PLUS is used for OMAP2 or later SoCs. Rename CONFIG_ARCH_OMAP2 to CONFIG_ARCH_OMAP2PLUS to follow this naming. Move the OMAP2+ board/SoC choice down to mach-omap2/Kconfig to slim down the arch/arm/Kconfig level. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Tom Rini <trini@konsulko.com> 2017-04-25 04:10:11 +00:00			`CONFIG_AM33XX=y`
configs: Re-sync Signed-off-by: Tom Rini <trini@konsulko.com> 2017-03-13 17:48:42 +00:00			`CONFIG_TARGET_CHILIBOARD=y`
board/chiliboard: Add support for chiliBoard chiliBoard is a development board which uses chiliSOM as its base. Hardware specification: * chiliSOM (TI AM335x, DRAM, NAND) * Ethernet PHY (id 0) * USB host (usb1) * MicroSD slot (mmc0) Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com> Reviewed-by: Tom Rini <trini@konsulko.com> 2017-01-25 08:53:08 +00:00			`CONFIG_SPL_MMC_SUPPORT=y`
			`CONFIG_SPL_SERIAL_SUPPORT=y`
configs: Re-sync Signed-off-by: Tom Rini <trini@konsulko.com> 2017-03-13 17:48:42 +00:00			`CONFIG_SPL_LIBDISK_SUPPORT=y`
			`CONFIG_SPL_NAND_SUPPORT=y`
board/chiliboard: Add support for chiliBoard chiliBoard is a development board which uses chiliSOM as its base. Hardware specification: * chiliSOM (TI AM335x, DRAM, NAND) * Ethernet PHY (id 0) * USB host (usb1) * MicroSD slot (mmc0) Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com> Reviewed-by: Tom Rini <trini@konsulko.com> 2017-01-25 08:53:08 +00:00			`CONFIG_SPL_WATCHDOG_SUPPORT=y`
			`CONFIG_SPL_STACK_R_ADDR=0x82000000`
configs: Resync defconfigs Signed-off-by: Tom Rini <trini@konsulko.com> 2017-06-19 13:47:40 +00:00			`CONFIG_SPL_FAT_SUPPORT=y`
Convert CONFIG_ENV_IS_IN_MMC/NAND/UBI and NOWHERE to Kconfig This converts the following to Kconfig: CONFIG_ENV_IS_IN_MMC CONFIG_ENV_IS_IN_NAND CONFIG_ENV_IS_IN_UBI CONFIG_ENV_IS_NOWHERE In fact this already exists for sunxi as a 'choice' config. However not all the choices are available in Kconfig yet so we cannot use that. It would lead to more than one option being set. In addition, one purpose of this series is to allow the environment to be stored in more than one place. So the existing choice is converted to a normal config allowing each option to be set independently. There are not many opportunities for Kconfig updates to reduce the size of this patch. This was tested with ./tools/moveconfig.py -i CONFIG_ENV_IS_IN_MMC And then manual updates. This is because for CHAIN_OF_TRUST boards they can only have ENV_IS_NOWHERE set, so we enforce that via Kconfig logic now. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com> 2017-07-24 03:19:39 +00:00			`CONFIG_ENV_IS_IN_MMC=y`
board/chiliboard: Add support for chiliBoard chiliBoard is a development board which uses chiliSOM as its base. Hardware specification: * chiliSOM (TI AM335x, DRAM, NAND) * Ethernet PHY (id 0) * USB host (usb1) * MicroSD slot (mmc0) Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com> Reviewed-by: Tom Rini <trini@konsulko.com> 2017-01-25 08:53:08 +00:00			`CONFIG_BOOTDELAY=1`
			`CONFIG_SYS_CONSOLE_INFO_QUIET=y`
			`CONFIG_SPL=y`
			`CONFIG_SPL_STACK_R=y`
configs: Re-sync Signed-off-by: Tom Rini <trini@konsulko.com> 2017-03-13 17:48:42 +00:00			`CONFIG_SPL_I2C_SUPPORT=y`
configs: Resync defconfigs Signed-off-by: Tom Rini <trini@konsulko.com> 2017-06-19 13:47:40 +00:00			`CONFIG_SPL_POWER_SUPPORT=y`
board/chiliboard: Add support for chiliBoard chiliBoard is a development board which uses chiliSOM as its base. Hardware specification: * chiliSOM (TI AM335x, DRAM, NAND) * Ethernet PHY (id 0) * USB host (usb1) * MicroSD slot (mmc0) Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com> Reviewed-by: Tom Rini <trini@konsulko.com> 2017-01-25 08:53:08 +00:00			`CONFIG_HUSH_PARSER=y`
			`CONFIG_CMD_BOOTZ=y`
			`# CONFIG_CMD_IMLS is not set`
			`CONFIG_CMD_ASKENV=y`
			`# CONFIG_CMD_FLASH is not set`
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com> 2017-08-14 23:58:53 +00:00			`CONFIG_CMD_GPIO=y`
			`CONFIG_CMD_I2C=y`
board/chiliboard: Add support for chiliBoard chiliBoard is a development board which uses chiliSOM as its base. Hardware specification: * chiliSOM (TI AM335x, DRAM, NAND) * Ethernet PHY (id 0) * USB host (usb1) * MicroSD slot (mmc0) Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com> Reviewed-by: Tom Rini <trini@konsulko.com> 2017-01-25 08:53:08 +00:00			`CONFIG_CMD_MMC=y`
configs: Migrate CMD_NAND* Migrate all remaining instances of CMD_NAND, CMD_NAND_TRIMFFS CMD_NAND_LOCK_UNLOCK and CMD_NAND_TORTURE from the headers into the defconfig files. Tested-by: Adam Ford <aford173@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> 2017-07-29 01:31:42 +00:00			`CONFIG_CMD_NAND=y`
board/chiliboard: Add support for chiliBoard chiliBoard is a development board which uses chiliSOM as its base. Hardware specification: * chiliSOM (TI AM335x, DRAM, NAND) * Ethernet PHY (id 0) * USB host (usb1) * MicroSD slot (mmc0) Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com> Reviewed-by: Tom Rini <trini@konsulko.com> 2017-01-25 08:53:08 +00:00			`CONFIG_CMD_USB=y`
			`# CONFIG_CMD_SETEXPR is not set`
			`CONFIG_CMD_DHCP=y`
			`CONFIG_CMD_MII=y`
			`CONFIG_CMD_PING=y`
			`CONFIG_CMD_EXT2=y`
			`CONFIG_CMD_EXT4=y`
			`CONFIG_CMD_EXT4_WRITE=y`
			`CONFIG_CMD_FAT=y`
			`CONFIG_CMD_FS_GENERIC=y`
configs: Migrate RBTREE, LZO, CMD_MTDPARTS, CMD_UBI and CMD_UBIFS The above CONFIG options are in Kconfig, and now have correct depends and inter-dependencies. Migrate these to configs/ from include/configs/. In the case of CMD_UBIFS also change it to be a default y if CMD_UBI. Signed-off-by: Tom Rini <trini@konsulko.com> 2017-07-22 22:36:16 +00:00			`CONFIG_CMD_MTDPARTS=y`
board/chiliboard: Add support for chiliBoard chiliBoard is a development board which uses chiliSOM as its base. Hardware specification: * chiliSOM (TI AM335x, DRAM, NAND) * Ethernet PHY (id 0) * USB host (usb1) * MicroSD slot (mmc0) Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com> Reviewed-by: Tom Rini <trini@konsulko.com> 2017-01-25 08:53:08 +00:00			`CONFIG_DM_GPIO=y`
			`CONFIG_MMC_OMAP_HS=y`
Convert CONFIG_NAND to Kconfig This converts the following to Kconfig: CONFIG_NAND Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Sync up a few more, add imply's] Signed-off-by: Tom Rini <trini@konsulko.com> 2017-08-07 21:37:18 +00:00			`CONFIG_NAND=y`
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com> 2017-08-14 23:58:53 +00:00			`CONFIG_PHYLIB=y`
board/chiliboard: Add support for chiliBoard chiliBoard is a development board which uses chiliSOM as its base. Hardware specification: * chiliSOM (TI AM335x, DRAM, NAND) * Ethernet PHY (id 0) * USB host (usb1) * MicroSD slot (mmc0) Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com> Reviewed-by: Tom Rini <trini@konsulko.com> 2017-01-25 08:53:08 +00:00			`CONFIG_SYS_NS16550=y`
Convert CONFIG_OMAP3_SPI to Kconfig This converts the following to Kconfig: CONFIG_OMAP3_SPI Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Minor comment tweaks] Signed-off-by: Tom Rini <trini@konsulko.com> 2017-07-27 03:25:30 +00:00			`CONFIG_OMAP3_SPI=y`
board/chiliboard: Add support for chiliBoard chiliBoard is a development board which uses chiliSOM as its base. Hardware specification: * chiliSOM (TI AM335x, DRAM, NAND) * Ethernet PHY (id 0) * USB host (usb1) * MicroSD slot (mmc0) Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com> Reviewed-by: Tom Rini <trini@konsulko.com> 2017-01-25 08:53:08 +00:00			`CONFIG_USB=y`
			`CONFIG_USB_MUSB_HOST=y`
			`CONFIG_USB_STORAGE=y`
Kconfig: Migrate FS_FAT / FAT_WRITE Now that these symbols are in Kconfig, migrate all users. Use imply on a number of platforms that default to having this enabled. As part of this we must migrate some straglers for CMD_FAT and DOS_PARTITION. Signed-off-by: Tom Rini <trini@konsulko.com> 2017-06-02 15:03:50 +00:00			`CONFIG_FAT_WRITE=y`
configs: Migrate RBTREE, LZO, CMD_MTDPARTS, CMD_UBI and CMD_UBIFS The above CONFIG options are in Kconfig, and now have correct depends and inter-dependencies. Migrate these to configs/ from include/configs/. In the case of CMD_UBIFS also change it to be a default y if CMD_UBI. Signed-off-by: Tom Rini <trini@konsulko.com> 2017-07-22 22:36:16 +00:00			`CONFIG_LZO=y`
board/chiliboard: Add support for chiliBoard chiliBoard is a development board which uses chiliSOM as its base. Hardware specification: * chiliSOM (TI AM335x, DRAM, NAND) * Ethernet PHY (id 0) * USB host (usb1) * MicroSD slot (mmc0) Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com> Reviewed-by: Tom Rini <trini@konsulko.com> 2017-01-25 08:53:08 +00:00			`CONFIG_OF_LIBFDT=y`