2018-05-06 21:58:06 +00:00
|
|
|
/* SPDX-License-Identifier: GPL-2.0 */
|
2015-01-19 10:33:41 +00:00
|
|
|
/*
|
|
|
|
|
* Copyright (C) Marvell International Ltd. and its affiliates
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#ifndef __BOARD_ENV_SPEC
|
|
|
|
|
#define __BOARD_ENV_SPEC
|
|
|
|
|
|
|
|
|
|
/* Board specific configuration */
|
|
|
|
|
|
|
|
|
|
/* KW40 */
|
|
|
|
|
#define MV_6710_DEV_ID 0x6710
|
|
|
|
|
|
|
|
|
|
#define MV_6710_Z1_REV 0x0
|
|
|
|
|
#define MV_6710_Z1_ID ((MV_6710_DEV_ID << 16) | MV_6710_Z1_REV)
|
|
|
|
|
#define MV_6710_Z1_NAME "MV6710 Z1"
|
|
|
|
|
|
|
|
|
|
/* Armada XP Family */
|
|
|
|
|
#define MV_78130_DEV_ID 0x7813
|
|
|
|
|
#define MV_78160_DEV_ID 0x7816
|
|
|
|
|
#define MV_78230_DEV_ID 0x7823
|
|
|
|
|
#define MV_78260_DEV_ID 0x7826
|
|
|
|
|
#define MV_78460_DEV_ID 0x7846
|
|
|
|
|
#define MV_78000_DEV_ID 0x7888
|
|
|
|
|
|
|
|
|
|
#define MV_FPGA_DEV_ID 0x2107
|
|
|
|
|
|
|
|
|
|
#define MV_78XX0_Z1_REV 0x0
|
|
|
|
|
|
|
|
|
|
/* boards ID numbers */
|
|
|
|
|
#define BOARD_ID_BASE 0x0
|
|
|
|
|
|
|
|
|
|
/* New board ID numbers */
|
2015-12-09 09:25:10 +00:00
|
|
|
#define DB_88F78XX0_BP_ID (BOARD_ID_BASE + 1)
|
2015-01-19 10:33:41 +00:00
|
|
|
#define RD_78460_SERVER_ID (DB_88F78XX0_BP_ID + 1)
|
|
|
|
|
#define DB_78X60_PCAC_ID (RD_78460_SERVER_ID + 1)
|
|
|
|
|
#define FPGA_88F78XX0_ID (DB_78X60_PCAC_ID + 1)
|
|
|
|
|
#define DB_88F78XX0_BP_REV2_ID (FPGA_88F78XX0_ID + 1)
|
|
|
|
|
#define RD_78460_NAS_ID (DB_88F78XX0_BP_REV2_ID + 1)
|
|
|
|
|
#define DB_78X60_AMC_ID (RD_78460_NAS_ID + 1)
|
|
|
|
|
#define DB_78X60_PCAC_REV2_ID (DB_78X60_AMC_ID + 1)
|
|
|
|
|
#define RD_78460_SERVER_REV2_ID (DB_78X60_PCAC_REV2_ID + 1)
|
|
|
|
|
#define DB_784MP_GP_ID (RD_78460_SERVER_REV2_ID + 1)
|
|
|
|
|
#define RD_78460_CUSTOMER_ID (DB_784MP_GP_ID + 1)
|
|
|
|
|
#define MV_MAX_BOARD_ID (RD_78460_CUSTOMER_ID + 1)
|
mvebu: Support Synology DS414
This adds support for the MV78230 based DS414 NAS by Synology. The
relevant bits have been extracted from the 'synogpl-5004-armadaxp'
package Synology kindly published, garnished with a fair amount of
trial-and-error.
Sadly, support is far from perfect. The major parts I have failed in
are SATA and XHCI support. Details about these and some other things
follow:
Device Tree
-----------
The device tree file armada-xp-synology-ds414.dts has been copied from
Linux and enhanced by recent U-Boot specific changes to
armada-xp-gp.dts.
SATA Support
------------
There is a Marvell 88SX7042 controller attached to PCIe which is
supported by Linux's sata_mv driver but sadly not U-Boot's sata_mv.
I'm not sure if extending the latter to support PCI devices is worth the
effort at all. Porting sata_mv from Linux exceeded my brain's
capacities. :(
XHCI Support
------------
There is an EtronTech EJ168A XHCI controller attached to PCIe which
drives the two rear USB3 ports. After a bit of playing around I managed
to get it recognized by xhci-pci, but never was able to access any
devices attached to it. Enabling it in ds414 board config shows that it
does not respond to commands for whatever reason. The (somewhat) bright
side to it is that it is not even supported in Synology's customized
U-Boot, but that also means nowhere to steal the relevant bits from.
EHCI Support
------------
This seems functional after issuing 'usb start'. At least it detects USB
storage devices, and IIRC reading from them was OK. OTOH Linux fails to
register the controller if 'usb start' wasn't given before in U-Boot.
According to Synology sources, this board seems to support USB device
(gadget?) mode. Though I didn't play around with it.
PCIe Support
------------
This is fine, but trying to gate the clocks of unused lanes will hang
PCI enum. In addition to that, pci_mvebu seems not to support DM_PCI.
DDR3 Training
-------------
Marvell/Synology uses eight PUPs instead of four. Does not look like
this is meant to be customized in mainline U-Boot at all. OTOH I have
no idea what a "PUP" actually is.
PEX Init
--------
Synology uses different values than mainline U-Boot with this patch:
pex_max_unit_get returns 2, pex_max_if_get returns 7 and
max_serdes_lines is set to 7. Not changing this seems to not have an
impact, although I'm not entirely sure it does not cause issues I am not
aware of.
Static Environment
------------------
This allows to boot stock Synology firmware at least. In order to be a
little more flexible when it comes to booting custom kernels, do not
only load zImage partition, but also rd.gz into memory. This way it is
possible to use about 7MB for kernel with piggyback initramfs.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Acked-by: Stefan Roese <sr@denx.de>
Reviewed-by: Tom Rini <trini@konsulko.com>
2015-12-25 13:41:25 +00:00
|
|
|
#define INVALID_BOARD_ID 0xFFFFFFFF
|
2015-01-19 10:33:41 +00:00
|
|
|
|
|
|
|
|
/* Sample at Reset */
|
|
|
|
|
#define MPP_SAMPLE_AT_RESET(id) (0x18230 + (id * 4))
|
|
|
|
|
|
|
|
|
|
/* BIOS Modes related defines */
|
|
|
|
|
|
|
|
|
|
#define SAR0_BOOTWIDTH_OFFSET 3
|
|
|
|
|
#define SAR0_BOOTWIDTH_MASK (0x3 << SAR0_BOOTWIDTH_OFFSET)
|
|
|
|
|
#define SAR0_BOOTSRC_OFFSET 5
|
|
|
|
|
#define SAR0_BOOTSRC_MASK (0xF << SAR0_BOOTSRC_OFFSET)
|
|
|
|
|
|
|
|
|
|
#define SAR0_L2_SIZE_OFFSET 19
|
|
|
|
|
#define SAR0_L2_SIZE_MASK (0x3 << SAR0_L2_SIZE_OFFSET)
|
|
|
|
|
#define SAR0_CPU_FREQ_OFFSET 21
|
|
|
|
|
#define SAR0_CPU_FREQ_MASK (0x7 << SAR0_CPU_FREQ_OFFSET)
|
|
|
|
|
#define SAR0_FABRIC_FREQ_OFFSET 24
|
|
|
|
|
#define SAR0_FABRIC_FREQ_MASK (0xF << SAR0_FABRIC_FREQ_OFFSET)
|
|
|
|
|
#define SAR0_CPU0CORE_OFFSET 31
|
|
|
|
|
#define SAR0_CPU0CORE_MASK (0x1 << SAR0_CPU0CORE_OFFSET)
|
|
|
|
|
#define SAR1_CPU0CORE_OFFSET 0
|
|
|
|
|
#define SAR1_CPU0CORE_MASK (0x1 << SAR1_CPU0CORE_OFFSET)
|
|
|
|
|
|
|
|
|
|
#define PEX_CLK_100MHZ_OFFSET 2
|
|
|
|
|
#define PEX_CLK_100MHZ_MASK (0x1 << PEX_CLK_100MHZ_OFFSET)
|
|
|
|
|
|
|
|
|
|
#define SAR1_FABRIC_MODE_OFFSET 19
|
|
|
|
|
#define SAR1_FABRIC_MODE_MASK (0x1 << SAR1_FABRIC_MODE_OFFSET)
|
|
|
|
|
#define SAR1_CPU_MODE_OFFSET 20
|
|
|
|
|
#define SAR1_CPU_MODE_MASK (0x1 << SAR1_CPU_MODE_OFFSET)
|
|
|
|
|
|
|
|
|
|
#define SAR_CPU_FAB_GET(cpu, fab) (((cpu & 0x7) << 21) | ((fab & 0xF) << 24))
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
#define CORE_AVS_CONTROL_0REG 0x18300
|
|
|
|
|
#define CORE_AVS_CONTROL_2REG 0x18308
|
|
|
|
|
#define CPU_AVS_CONTROL2_REG 0x20868
|
|
|
|
|
#define CPU_AVS_CONTROL0_REG 0x20860
|
|
|
|
|
#define GENERAL_PURPOSE_RESERVED0_REG 0x182E0
|
|
|
|
|
|
|
|
|
|
#define MSAR_TCLK_OFFS 28
|
|
|
|
|
#define MSAR_TCLK_MASK (0x1 << MSAR_TCLK_OFFS)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
/* Controler environment registers offsets */
|
|
|
|
|
#define GEN_PURP_RES_1_REG 0x182F4
|
|
|
|
|
#define GEN_PURP_RES_2_REG 0x182F8
|
|
|
|
|
|
|
|
|
|
/* registers offsets */
|
|
|
|
|
#define MV_GPP_REGS_OFFSET(unit) (0x18100 + ((unit) * 0x40))
|
|
|
|
|
#define MPP_CONTROL_REG(id) (0x18000 + (id * 4))
|
|
|
|
|
#define MV_GPP_REGS_BASE(unit) (MV_GPP_REGS_OFFSET(unit))
|
|
|
|
|
#define MV_GPP_REGS_BASE_0 (MV_GPP_REGS_OFFSET_0)
|
|
|
|
|
|
|
|
|
|
#define GPP_DATA_OUT_REG(grp) (MV_GPP_REGS_BASE(grp) + 0x00)
|
|
|
|
|
#define GPP_DATA_OUT_REG_0 (MV_GPP_REGS_BASE_0 + 0x00) /* Used in .S files */
|
|
|
|
|
#define GPP_DATA_OUT_EN_REG(grp) (MV_GPP_REGS_BASE(grp) + 0x04)
|
|
|
|
|
#define GPP_BLINK_EN_REG(grp) (MV_GPP_REGS_BASE(grp) + 0x08)
|
|
|
|
|
#define GPP_DATA_IN_POL_REG(grp) (MV_GPP_REGS_BASE(grp) + 0x0C)
|
|
|
|
|
#define GPP_DATA_IN_REG(grp) (MV_GPP_REGS_BASE(grp) + 0x10)
|
|
|
|
|
#define GPP_INT_CAUSE_REG(grp) (MV_GPP_REGS_BASE(grp) + 0x14)
|
|
|
|
|
#define GPP_INT_MASK_REG(grp) (MV_GPP_REGS_BASE(grp) + 0x18)
|
|
|
|
|
#define GPP_INT_LVL_REG(grp) (MV_GPP_REGS_BASE(grp) + 0x1C)
|
|
|
|
|
#define GPP_OUT_SET_REG(grp) (0x18130 + ((grp) * 0x40))
|
|
|
|
|
#define GPP_64_66_DATA_OUT_SET_REG 0x181A4
|
|
|
|
|
#define GPP_OUT_CLEAR_REG(grp) (0x18134 + ((grp) * 0x40))
|
|
|
|
|
#define GPP_64_66_DATA_OUT_CLEAR_REG 0x181B0
|
|
|
|
|
#define GPP_FUNC_SELECT_REG (MV_GPP_REGS_BASE(0) + 0x40)
|
|
|
|
|
|
|
|
|
|
#define MV_GPP66 (1 << 2)
|
|
|
|
|
|
|
|
|
|
/* Relevant for MV78XX0 */
|
|
|
|
|
#define GPP_DATA_OUT_SET_REG (MV_GPP_REGS_BASE(0) + 0x20)
|
|
|
|
|
#define GPP_DATA_OUT_CLEAR_REG (MV_GPP_REGS_BASE(0) + 0x24)
|
|
|
|
|
|
|
|
|
|
/* This define describes the maximum number of supported PEX Interfaces */
|
|
|
|
|
#define MV_PEX_MAX_IF 10
|
|
|
|
|
#define MV_PEX_MAX_UNIT 4
|
|
|
|
|
|
|
|
|
|
#define MV_SERDES_NUM_TO_PEX_NUM(num) ((num < 8) ? (num) : (8 + (num / 12)))
|
|
|
|
|
|
|
|
|
|
#define PEX_PHY_ACCESS_REG(unit) (0x40000 + ((unit) % 2 * 0x40000) + \
|
|
|
|
|
((unit)/2 * 0x2000) + 0x1B00)
|
|
|
|
|
|
|
|
|
|
#define SATA_BASE_REG(port) (0xA2000 + (port)*0x2000)
|
|
|
|
|
|
|
|
|
|
#define SATA_PWR_PLL_CTRL_REG(port) (SATA_BASE_REG(port) + 0x804)
|
|
|
|
|
#define SATA_DIG_LP_ENA_REG(port) (SATA_BASE_REG(port) + 0x88C)
|
|
|
|
|
#define SATA_REF_CLK_SEL_REG(port) (SATA_BASE_REG(port) + 0x918)
|
|
|
|
|
#define SATA_COMPHY_CTRL_REG(port) (SATA_BASE_REG(port) + 0x920)
|
|
|
|
|
#define SATA_LP_PHY_EXT_CTRL_REG(port) (SATA_BASE_REG(port) + 0x058)
|
|
|
|
|
#define SATA_LP_PHY_EXT_STAT_REG(port) (SATA_BASE_REG(port) + 0x05C)
|
|
|
|
|
#define SATA_IMP_TX_SSC_CTRL_REG(port) (SATA_BASE_REG(port) + 0x810)
|
|
|
|
|
#define SATA_GEN_1_SET_0_REG(port) (SATA_BASE_REG(port) + 0x834)
|
|
|
|
|
#define SATA_GEN_1_SET_1_REG(port) (SATA_BASE_REG(port) + 0x838)
|
|
|
|
|
#define SATA_GEN_2_SET_0_REG(port) (SATA_BASE_REG(port) + 0x83C)
|
|
|
|
|
#define SATA_GEN_2_SET_1_REG(port) (SATA_BASE_REG(port) + 0x840)
|
|
|
|
|
|
|
|
|
|
#define MV_ETH_BASE_ADDR (0x72000)
|
|
|
|
|
#define MV_ETH_REGS_OFFSET(port) (MV_ETH_BASE_ADDR - ((port) / 2) * \
|
|
|
|
|
0x40000 + ((port) % 2) * 0x4000)
|
|
|
|
|
#define MV_ETH_REGS_BASE(port) MV_ETH_REGS_OFFSET(port)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
#define SGMII_PWR_PLL_CTRL_REG(port) (MV_ETH_REGS_BASE(port) + 0xE04)
|
|
|
|
|
#define SGMII_DIG_LP_ENA_REG(port) (MV_ETH_REGS_BASE(port) + 0xE8C)
|
|
|
|
|
#define SGMII_REF_CLK_SEL_REG(port) (MV_ETH_REGS_BASE(port) + 0xF18)
|
|
|
|
|
#define SGMII_SERDES_CFG_REG(port) (MV_ETH_REGS_BASE(port) + 0x4A0)
|
|
|
|
|
#define SGMII_SERDES_STAT_REG(port) (MV_ETH_REGS_BASE(port) + 0x4A4)
|
|
|
|
|
#define SGMII_COMPHY_CTRL_REG(port) (MV_ETH_REGS_BASE(port) + 0xF20)
|
|
|
|
|
#define QSGMII_GEN_1_SETTING_REG(port) (MV_ETH_REGS_BASE(port) + 0xE38)
|
|
|
|
|
#define QSGMII_SERDES_CFG_REG(port) (MV_ETH_REGS_BASE(port) + 0x4a0)
|
|
|
|
|
|
|
|
|
|
#define SERDES_LINE_MUX_REG_0_7 0x18270
|
|
|
|
|
#define SERDES_LINE_MUX_REG_8_15 0x18274
|
|
|
|
|
#define QSGMII_CONTROL_1_REG 0x18404
|
|
|
|
|
|
|
|
|
|
/* SOC_CTRL_REG fields */
|
|
|
|
|
#define SCR_PEX_ENA_OFFS(pex) ((pex) & 0x3)
|
|
|
|
|
#define SCR_PEX_ENA_MASK(pex) (1 << pex)
|
|
|
|
|
|
|
|
|
|
#define PCIE0_QUADX1_EN (1<<7)
|
|
|
|
|
#define PCIE1_QUADX1_EN (1<<8)
|
|
|
|
|
|
|
|
|
|
#define SCR_PEX_4BY1_OFFS(pex) ((pex) + 7)
|
|
|
|
|
#define SCR_PEX_4BY1_MASK(pex) (1 << SCR_PEX_4BY1_OFFS(pex))
|
|
|
|
|
|
|
|
|
|
#define PCIE1_CLK_OUT_EN_OFF 5
|
|
|
|
|
#define PCIE1_CLK_OUT_EN_MASK (1 << PCIE1_CLK_OUT_EN_OFF)
|
|
|
|
|
|
|
|
|
|
#define PCIE0_CLK_OUT_EN_OFF 4
|
|
|
|
|
#define PCIE0_CLK_OUT_EN_MASK (1 << PCIE0_CLK_OUT_EN_OFF)
|
|
|
|
|
|
|
|
|
|
#define SCR_PEX0_4BY1_OFFS 7
|
|
|
|
|
#define SCR_PEX0_4BY1_MASK (1 << SCR_PEX0_4BY1_OFFS)
|
|
|
|
|
|
|
|
|
|
#define SCR_PEX1_4BY1_OFFS 8
|
|
|
|
|
#define SCR_PEX1_4BY1_MASK (1 << SCR_PEX1_4BY1_OFFS)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
#define MV_MISC_REGS_OFFSET (0x18200)
|
|
|
|
|
#define MV_MISC_REGS_BASE (MV_MISC_REGS_OFFSET)
|
|
|
|
|
#define SOC_CTRL_REG (MV_MISC_REGS_BASE + 0x4)
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* PCI Express Control and Status Registers
|
|
|
|
|
*/
|
|
|
|
|
#define MAX_PEX_DEVICES 32
|
|
|
|
|
#define MAX_PEX_FUNCS 8
|
|
|
|
|
#define MAX_PEX_BUSSES 256
|
|
|
|
|
|
|
|
|
|
#define PXSR_PEX_BUS_NUM_OFFS 8 /* Bus Number Indication */
|
|
|
|
|
#define PXSR_PEX_BUS_NUM_MASK (0xff << PXSR_PEX_BUS_NUM_OFFS)
|
|
|
|
|
|
|
|
|
|
#define PXSR_PEX_DEV_NUM_OFFS 16 /* Device Number Indication */
|
|
|
|
|
#define PXSR_PEX_DEV_NUM_MASK (0x1f << PXSR_PEX_DEV_NUM_OFFS)
|
|
|
|
|
|
|
|
|
|
#define PXSR_DL_DOWN 0x1 /* DL_Down indication. */
|
|
|
|
|
#define PXCAR_CONFIG_EN (1 << 31)
|
|
|
|
|
#define PEX_STATUS_AND_COMMAND 0x004
|
|
|
|
|
#define PXSAC_MABORT (1 << 29) /* Recieved Master Abort */
|
|
|
|
|
|
|
|
|
|
/* PCI Express Configuration Address Register */
|
|
|
|
|
|
|
|
|
|
/* PEX_CFG_ADDR_REG (PXCAR) */
|
|
|
|
|
#define PXCAR_REG_NUM_OFFS 2
|
|
|
|
|
#define PXCAR_REG_NUM_MAX 0x3F
|
|
|
|
|
#define PXCAR_REG_NUM_MASK (PXCAR_REG_NUM_MAX << PXCAR_REG_NUM_OFFS)
|
|
|
|
|
#define PXCAR_FUNC_NUM_OFFS 8
|
|
|
|
|
#define PXCAR_FUNC_NUM_MAX 0x7
|
|
|
|
|
#define PXCAR_FUNC_NUM_MASK (PXCAR_FUNC_NUM_MAX << PXCAR_FUNC_NUM_OFFS)
|
|
|
|
|
#define PXCAR_DEVICE_NUM_OFFS 11
|
|
|
|
|
#define PXCAR_DEVICE_NUM_MAX 0x1F
|
|
|
|
|
#define PXCAR_DEVICE_NUM_MASK (PXCAR_DEVICE_NUM_MAX << PXCAR_DEVICE_NUM_OFFS)
|
|
|
|
|
#define PXCAR_BUS_NUM_OFFS 16
|
|
|
|
|
#define PXCAR_BUS_NUM_MAX 0xFF
|
|
|
|
|
#define PXCAR_BUS_NUM_MASK (PXCAR_BUS_NUM_MAX << PXCAR_BUS_NUM_OFFS)
|
|
|
|
|
#define PXCAR_EXT_REG_NUM_OFFS 24
|
|
|
|
|
#define PXCAR_EXT_REG_NUM_MAX 0xF
|
|
|
|
|
|
|
|
|
|
#define PXCAR_REAL_EXT_REG_NUM_OFFS 8
|
|
|
|
|
#define PXCAR_REAL_EXT_REG_NUM_MASK (0xF << PXCAR_REAL_EXT_REG_NUM_OFFS)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
#define PEX_CAPABILITIES_REG(if) ((MV_PEX_IF_REGS_BASE(if)) + 0x60)
|
|
|
|
|
#define PEX_LINK_CAPABILITIES_REG(if) ((MV_PEX_IF_REGS_BASE(if)) + 0x6C)
|
|
|
|
|
#define PEX_LINK_CTRL_STATUS_REG(if) ((MV_PEX_IF_REGS_BASE(if)) + 0x70)
|
|
|
|
|
#define PEX_LINK_CTRL_STATUS2_REG(if) ((MV_PEX_IF_REGS_BASE(if)) + 0x90)
|
|
|
|
|
#define PEX_CTRL_REG(if) ((MV_PEX_IF_REGS_BASE(if)) + 0x1A00)
|
|
|
|
|
#define PEX_STATUS_REG(if) ((MV_PEX_IF_REGS_BASE(if)) + 0x1A04)
|
|
|
|
|
#define PEX_COMPLT_TMEOUT_REG(if) ((MV_PEX_IF_REGS_BASE(if)) + 0x1A10)
|
|
|
|
|
#define PEX_PWR_MNG_EXT_REG(if) ((MV_PEX_IF_REGS_BASE(if)) + 0x1A18)
|
|
|
|
|
#define PEX_FLOW_CTRL_REG(if) ((MV_PEX_IF_REGS_BASE(if)) + 0x1A20)
|
|
|
|
|
#define PEX_DYNMC_WIDTH_MNG_REG(if) ((MV_PEX_IF_REGS_BASE(if)) + 0x1A30)
|
|
|
|
|
#define PEX_ROOT_CMPLX_SSPL_REG(if) ((MV_PEX_IF_REGS_BASE(if)) + 0x1A0C)
|
|
|
|
|
#define PEX_RAM_PARITY_CTRL_REG(if) ((MV_PEX_IF_REGS_BASE(if)) + 0x1A50)
|
|
|
|
|
#define PEX_DBG_CTRL_REG(if) ((MV_PEX_IF_REGS_BASE(if)) + 0x1A60)
|
|
|
|
|
#define PEX_DBG_STATUS_REG(if) ((MV_PEX_IF_REGS_BASE(if)) + 0x1A64)
|
|
|
|
|
|
|
|
|
|
#define PXLCSR_NEG_LNK_GEN_OFFS 16 /* Negotiated Link GEN */
|
|
|
|
|
#define PXLCSR_NEG_LNK_GEN_MASK (0xf << PXLCSR_NEG_LNK_GEN_OFFS)
|
|
|
|
|
#define PXLCSR_NEG_LNK_GEN_1_1 (0x1 << PXLCSR_NEG_LNK_GEN_OFFS)
|
|
|
|
|
#define PXLCSR_NEG_LNK_GEN_2_0 (0x2 << PXLCSR_NEG_LNK_GEN_OFFS)
|
|
|
|
|
|
|
|
|
|
#define PEX_CFG_ADDR_REG(if) ((MV_PEX_IF_REGS_BASE(if)) + 0x18F8)
|
|
|
|
|
#define PEX_CFG_DATA_REG(if) ((MV_PEX_IF_REGS_BASE(if)) + 0x18FC)
|
|
|
|
|
#define PEX_CAUSE_REG(if) ((MV_PEX_IF_REGS_BASE(if)) + 0x1900)
|
|
|
|
|
|
|
|
|
|
#define PEX_CAPABILITY_REG 0x60
|
|
|
|
|
#define PEX_DEV_CAPABILITY_REG 0x64
|
|
|
|
|
#define PEX_DEV_CTRL_STAT_REG 0x68
|
|
|
|
|
#define PEX_LINK_CAPABILITY_REG 0x6C
|
|
|
|
|
#define PEX_LINK_CTRL_STAT_REG 0x70
|
|
|
|
|
#define PEX_LINK_CTRL_STAT_2_REG 0x90
|
|
|
|
|
|
|
|
|
|
#endif /* __BOARD_ENV_SPEC */
|
