u-boot/drivers/mmc/bcmstb_sdhci.c

162 lines
4.3 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2018 Cisco Systems, Inc.
* (C) Copyright 2019 Synamedia
*
* Author: Thomas Fitzsimmons <fitzsim@fitzsim.org>
*/
#include <common.h>
#include <dm.h>
#include <mach/sdhci.h>
#include <malloc.h>
#include <sdhci.h>
/*
* The BCMSTB SDHCI has a quirk in that its actual maximum frequency
* capability is 100 MHz. The divisor that is eventually written to
* SDHCI_CLOCK_CONTROL is calculated based on what the MMC device
* reports, and relative to this maximum frequency.
*
* This define used to be set to 52000000 (52 MHz), the desired
* maximum frequency, but that would result in the communication
* actually running at 100 MHz (seemingly without issue), which is
* out-of-spec.
*
* Now, by setting this to 0 (auto-detect), 100 MHz will be read from
* the capabilities register, and the resulting divisor will be
* doubled, meaning that the clock control register will be set to the
* in-spec 52 MHz value.
*/
#define BCMSTB_SDHCI_MAXIMUM_CLOCK_FREQUENCY 0
/*
* When the minimum clock frequency is set to 0 (auto-detect), U-Boot
* sets it to 100 MHz divided by SDHCI_MAX_DIV_SPEC_300, or 48,875 Hz,
* which results in the controller timing out when trying to
* communicate with the MMC device. Hard-code this value to 400000
* (400 kHz) to prevent this.
*/
#define BCMSTB_SDHCI_MINIMUM_CLOCK_FREQUENCY 400000
#define SDIO_CFG_CTRL 0x0
#define SDIO_CFG_CTRL_SDCD_N_TEST_EN BIT(31)
#define SDIO_CFG_CTRL_SDCD_N_TEST_LEV BIT(30)
#define SDIO_CFG_SD_PIN_SEL 0x44
#define SDIO_CFG_SD_PIN_SEL_MASK 0x3
#define SDIO_CFG_SD_PIN_SEL_CARD BIT(1)
struct sdhci_bcmstb_plat {
struct mmc_config cfg;
struct mmc mmc;
};
struct sdhci_brcmstb_dev_priv {
int (*init)(struct udevice *dev);
};
static int sdhci_brcmstb_init_2712(struct udevice *dev)
{
struct sdhci_host *host = dev_get_priv(dev);
void *cfg_regs;
u32 reg;
/* Map in the non-standard CFG registers */
cfg_regs = dev_remap_addr_name(dev, "cfg");
if (!cfg_regs)
return -ENOENT;
if ((host->mmc->host_caps & MMC_CAP_NONREMOVABLE) ||
(host->mmc->host_caps & MMC_CAP_NEEDS_POLL)) {
/* Force presence */
reg = readl(cfg_regs + SDIO_CFG_CTRL);
reg &= ~SDIO_CFG_CTRL_SDCD_N_TEST_LEV;
reg |= SDIO_CFG_CTRL_SDCD_N_TEST_EN;
writel(reg, cfg_regs + SDIO_CFG_CTRL);
} else {
/* Enable card detection line */
reg = readl(cfg_regs + SDIO_CFG_SD_PIN_SEL);
reg &= ~SDIO_CFG_SD_PIN_SEL_MASK;
reg |= SDIO_CFG_SD_PIN_SEL_CARD;
writel(reg, cfg_regs + SDIO_CFG_SD_PIN_SEL);
}
return 0;
}
static int sdhci_bcmstb_bind(struct udevice *dev)
{
struct sdhci_bcmstb_plat *plat = dev_get_plat(dev);
return sdhci_bind(dev, &plat->mmc, &plat->cfg);
}
/* No specific SDHCI operations are required */
static const struct sdhci_ops bcmstb_sdhci_ops = { 0 };
static int sdhci_bcmstb_probe(struct udevice *dev)
{
struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev);
struct sdhci_bcmstb_plat *plat = dev_get_plat(dev);
struct sdhci_host *host = dev_get_priv(dev);
struct sdhci_brcmstb_dev_priv *dev_priv;
fdt_addr_t base;
int ret;
dev_priv = (struct sdhci_brcmstb_dev_priv *)dev_get_driver_data(dev);
base = dev_read_addr(dev);
if (base == FDT_ADDR_T_NONE)
return -EINVAL;
host->name = dev->name;
host->ioaddr = (void *)base;
ret = mmc_of_parse(dev, &plat->cfg);
if (ret)
return ret;
host->mmc = &plat->mmc;
host->mmc->dev = dev;
host->ops = &bcmstb_sdhci_ops;
ret = sdhci_setup_cfg(&plat->cfg, host,
BCMSTB_SDHCI_MAXIMUM_CLOCK_FREQUENCY,
BCMSTB_SDHCI_MINIMUM_CLOCK_FREQUENCY);
if (ret)
return ret;
upriv->mmc = &plat->mmc;
host->mmc->priv = host;
if (dev_priv && dev_priv->init) {
ret = dev_priv->init(dev);
if (ret)
return ret;
}
return sdhci_probe(dev);
}
static const struct sdhci_brcmstb_dev_priv match_priv_2712 = {
.init = sdhci_brcmstb_init_2712,
};
static const struct udevice_id sdhci_bcmstb_match[] = {
{ .compatible = "brcm,bcm2712-sdhci", .data = (ulong)&match_priv_2712 },
{ .compatible = "brcm,bcm7425-sdhci" },
{ .compatible = "brcm,sdhci-brcmstb" },
{ }
};
U_BOOT_DRIVER(sdhci_bcmstb) = {
.name = "sdhci-bcmstb",
.id = UCLASS_MMC,
.of_match = sdhci_bcmstb_match,
.ops = &sdhci_ops,
.bind = sdhci_bcmstb_bind,
.probe = sdhci_bcmstb_probe,
.priv_auto = sizeof(struct sdhci_host),
.plat_auto = sizeof(struct sdhci_bcmstb_plat),
};