u-boot/boot/pxe_utils.c

1634 lines
36 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2010-2011 Calxeda, Inc.
* Copyright (c) 2014, NVIDIA CORPORATION. All rights reserved.
*/
#include <common.h>
#include <command.h>
#include <dm.h>
#include <env.h>
#include <image.h>
#include <log.h>
#include <malloc.h>
#include <mapmem.h>
#include <net.h>
#include <fdt_support.h>
#include <video.h>
#include <linux/libfdt.h>
#include <linux/string.h>
#include <linux/ctype.h>
#include <errno.h>
#include <linux/list.h>
#ifdef CONFIG_DM_RNG
#include <rng.h>
#endif
#include <splash.h>
#include <asm/io.h>
#include "menu.h"
#include "cli.h"
#include "pxe_utils.h"
#define MAX_TFTP_PATH_LEN 512
int pxe_get_file_size(ulong *sizep)
{
const char *val;
val = from_env("filesize");
if (!val)
return -ENOENT;
if (strict_strtoul(val, 16, sizep) < 0)
return -EINVAL;
return 0;
}
/**
* format_mac_pxe() - obtain a MAC address in the PXE format
*
* This produces a MAC-address string in the format for the current ethernet
* device:
*
* 01-aa-bb-cc-dd-ee-ff
*
* where aa-ff is the MAC address in hex
*
* @outbuf: Buffer to write string to
* @outbuf_len: length of buffer
* Return: 1 if OK, -ENOSPC if buffer is too small, -ENOENT is there is no
* current ethernet device
*/
int format_mac_pxe(char *outbuf, size_t outbuf_len)
{
uchar ethaddr[6];
if (outbuf_len < 21) {
printf("outbuf is too small (%zd < 21)\n", outbuf_len);
return -ENOSPC;
}
if (!eth_env_get_enetaddr_by_index("eth", eth_get_dev_index(), ethaddr))
return -ENOENT;
sprintf(outbuf, "01-%02x-%02x-%02x-%02x-%02x-%02x",
ethaddr[0], ethaddr[1], ethaddr[2],
ethaddr[3], ethaddr[4], ethaddr[5]);
return 1;
}
/**
* get_relfile() - read a file relative to the PXE file
*
* As in pxelinux, paths to files referenced from files we retrieve are
* relative to the location of bootfile. get_relfile takes such a path and
* joins it with the bootfile path to get the full path to the target file. If
* the bootfile path is NULL, we use file_path as is.
*
* @ctx: PXE context
* @file_path: File path to read (relative to the PXE file)
* @file_addr: Address to load file to
* @filesizep: If not NULL, returns the file size in bytes
* Returns 1 for success, or < 0 on error
*/
static int get_relfile(struct pxe_context *ctx, const char *file_path,
unsigned long file_addr, ulong *filesizep)
{
size_t path_len;
char relfile[MAX_TFTP_PATH_LEN + 1];
char addr_buf[18];
ulong size;
int ret;
if (file_path[0] == '/' && ctx->allow_abs_path)
*relfile = '\0';
else
strncpy(relfile, ctx->bootdir, MAX_TFTP_PATH_LEN);
path_len = strlen(file_path) + strlen(relfile);
if (path_len > MAX_TFTP_PATH_LEN) {
printf("Base path too long (%s%s)\n", relfile, file_path);
return -ENAMETOOLONG;
}
strcat(relfile, file_path);
printf("Retrieving file: %s\n", relfile);
sprintf(addr_buf, "%lx", file_addr);
ret = ctx->getfile(ctx, relfile, addr_buf, &size);
if (ret < 0)
return log_msg_ret("get", ret);
if (filesizep)
*filesizep = size;
return 1;
}
/**
* get_pxe_file() - read a file
*
* The file is read and nul-terminated
*
* @ctx: PXE context
* @file_path: File path to read (relative to the PXE file)
* @file_addr: Address to load file to
* Returns 1 for success, or < 0 on error
*/
int get_pxe_file(struct pxe_context *ctx, const char *file_path,
ulong file_addr)
{
ulong size;
int err;
char *buf;
err = get_relfile(ctx, file_path, file_addr, &size);
if (err < 0)
return err;
buf = map_sysmem(file_addr + size, 1);
*buf = '\0';
unmap_sysmem(buf);
return 1;
}
#define PXELINUX_DIR "pxelinux.cfg/"
/**
* get_pxelinux_path() - Get a file in the pxelinux.cfg/ directory
*
* @ctx: PXE context
* @file: Filename to process (relative to pxelinux.cfg/)
* Returns 1 for success, -ENAMETOOLONG if the resulting path is too long.
* or other value < 0 on other error
*/
int get_pxelinux_path(struct pxe_context *ctx, const char *file,
unsigned long pxefile_addr_r)
{
size_t base_len = strlen(PXELINUX_DIR);
char path[MAX_TFTP_PATH_LEN + 1];
if (base_len + strlen(file) > MAX_TFTP_PATH_LEN) {
printf("path (%s%s) too long, skipping\n",
PXELINUX_DIR, file);
return -ENAMETOOLONG;
}
sprintf(path, PXELINUX_DIR "%s", file);
return get_pxe_file(ctx, path, pxefile_addr_r);
}
/**
* get_relfile_envaddr() - read a file to an address in an env var
*
* Wrapper to make it easier to store the file at file_path in the location
* specified by envaddr_name. file_path will be joined to the bootfile path,
* if any is specified.
*
* @ctx: PXE context
* @file_path: File path to read (relative to the PXE file)
* @envaddr_name: Name of environment variable which contains the address to
* load to
* @filesizep: Returns the file size in bytes
* Returns 1 on success, -ENOENT if @envaddr_name does not exist as an
* environment variable, -EINVAL if its format is not valid hex, or other
* value < 0 on other error
*/
static int get_relfile_envaddr(struct pxe_context *ctx, const char *file_path,
const char *envaddr_name, ulong *filesizep)
{
unsigned long file_addr;
char *envaddr;
envaddr = from_env(envaddr_name);
if (!envaddr)
return -ENOENT;
if (strict_strtoul(envaddr, 16, &file_addr) < 0)
return -EINVAL;
return get_relfile(ctx, file_path, file_addr, filesizep);
}
/**
* label_create() - crate a new PXE label
*
* Allocates memory for and initializes a pxe_label. This uses malloc, so the
* result must be free()'d to reclaim the memory.
*
* Returns a pointer to the label, or NULL if out of memory
*/
static struct pxe_label *label_create(void)
{
struct pxe_label *label;
label = malloc(sizeof(struct pxe_label));
if (!label)
return NULL;
memset(label, 0, sizeof(struct pxe_label));
return label;
}
/**
* label_destroy() - free the memory used by a pxe_label
*
* This frees @label itself as well as memory used by its name,
* kernel, config, append, initrd, fdt, fdtdir and fdtoverlay members, if
* they're non-NULL.
*
* So - be sure to only use dynamically allocated memory for the members of
* the pxe_label struct, unless you want to clean it up first. These are
* currently only created by the pxe file parsing code.
*
* @label: Label to free
*/
static void label_destroy(struct pxe_label *label)
{
free(label->name);
cmd: pxe: support INITRD and FDT selection with FIT Since the commit d5ba6188dfbf ("cmd: pxe_utils: Check fdtcontroladdr in label_boot") the FDT or the FDTDIR label is required in extlinux.conf and the fallback done by bootm command when only the device tree present in this command parameters is no more performed when FIT is used for kernel. When the label FDT or FDTDIR are absent or if the device tree file is absent, the PXE command in U-Boot uses the default U-Boot device tree selected by fdtcontroladdr = gd->fdt_blob, it is the "Scenario 3". With this scenario the bootm FIP fallback is no more possible with the extlinux.conf when only "kernel" label is present and is a FIP: kernel <path>#<conf>[#<extra-conf[#...]] As the U-Boot FDT is always provided in the third bootm argument, the device tree found in FIP is not used as fallback, it was done previously in boot_get_fdt(). This patch adds a new field kernel_label to save the full kernel label. The FDT bootm parameters use the kernel address (to avoid to load a second time the same FIP) and the config when this full label is reused for "fdt" or "initrd" label. This FIP support in extlinux.conf is restored when the "FDT" label can be found and select the same FIP (identical file and configuration): kernel <path>#<conf>[#<extra-conf[#...]] fdt <path>#<conf>[#<extra-conf[#...]] The patch add also this possibility for initrd. initrd <path>#<conf>[#<extra-conf[#...]] Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
2022-10-28 09:01:19 +00:00
free(label->kernel_label);
free(label->kernel);
free(label->config);
free(label->append);
free(label->initrd);
free(label->fdt);
free(label->fdtdir);
free(label->fdtoverlays);
free(label);
}
/**
* label_print() - Print a label and its string members if they're defined
*
* This is passed as a callback to the menu code for displaying each
* menu entry.
*
* @data: Label to print (is cast to struct pxe_label *)
*/
static void label_print(void *data)
{
struct pxe_label *label = data;
const char *c = label->menu ? label->menu : label->name;
printf("%s:\t%s\n", label->num, c);
}
/**
* label_localboot() - Boot a label that specified 'localboot'
*
* This requires that the 'localcmd' environment variable is defined. Its
* contents will be executed as U-Boot commands. If the label specified an
* 'append' line, its contents will be used to overwrite the contents of the
* 'bootargs' environment variable prior to running 'localcmd'.
*
* @label: Label to process
* Returns 1 on success or < 0 on error
*/
static int label_localboot(struct pxe_label *label)
{
char *localcmd;
localcmd = from_env("localcmd");
if (!localcmd)
return -ENOENT;
if (label->append) {
char bootargs[CONFIG_SYS_CBSIZE];
cli_simple_process_macros(label->append, bootargs,
sizeof(bootargs));
env_set("bootargs", bootargs);
}
debug("running: %s\n", localcmd);
return run_command_list(localcmd, strlen(localcmd), 0);
}
/*
* label_boot_kaslrseed generate kaslrseed from hw rng
*/
static void label_boot_kaslrseed(void)
{
#ifdef CONFIG_DM_RNG
ulong fdt_addr;
struct fdt_header *working_fdt;
size_t n = 0x8;
struct udevice *dev;
u64 *buf;
int nodeoffset;
int err;
/* Get the main fdt and map it */
fdt_addr = hextoul(env_get("fdt_addr_r"), NULL);
working_fdt = map_sysmem(fdt_addr, 0);
err = fdt_check_header(working_fdt);
if (err)
return;
/* add extra size for holding kaslr-seed */
/* err is new fdt size, 0 or negtive */
err = fdt_shrink_to_minimum(working_fdt, 512);
if (err <= 0)
return;
if (uclass_get_device(UCLASS_RNG, 0, &dev) || !dev) {
printf("No RNG device\n");
return;
}
nodeoffset = fdt_find_or_add_subnode(working_fdt, 0, "chosen");
if (nodeoffset < 0) {
printf("Reading chosen node failed\n");
return;
}
buf = malloc(n);
if (!buf) {
printf("Out of memory\n");
return;
}
if (dm_rng_read(dev, buf, n)) {
printf("Reading RNG failed\n");
goto err;
}
err = fdt_setprop(working_fdt, nodeoffset, "kaslr-seed", buf, sizeof(buf));
if (err < 0) {
printf("Unable to set kaslr-seed on chosen node: %s\n", fdt_strerror(err));
goto err;
}
err:
free(buf);
#endif
return;
}
/**
* label_boot_fdtoverlay() - Loads fdt overlays specified in 'fdtoverlays'
* or 'devicetree-overlay'
*
* @ctx: PXE context
* @label: Label to process
*/
#ifdef CONFIG_OF_LIBFDT_OVERLAY
static void label_boot_fdtoverlay(struct pxe_context *ctx,
struct pxe_label *label)
{
char *fdtoverlay = label->fdtoverlays;
struct fdt_header *working_fdt;
char *fdtoverlay_addr_env;
ulong fdtoverlay_addr;
ulong fdt_addr;
int err;
/* Get the main fdt and map it */
fdt_addr = hextoul(env_get("fdt_addr_r"), NULL);
working_fdt = map_sysmem(fdt_addr, 0);
err = fdt_check_header(working_fdt);
if (err)
return;
/* Get the specific overlay loading address */
fdtoverlay_addr_env = env_get("fdtoverlay_addr_r");
if (!fdtoverlay_addr_env) {
printf("Invalid fdtoverlay_addr_r for loading overlays\n");
return;
}
fdtoverlay_addr = hextoul(fdtoverlay_addr_env, NULL);
/* Cycle over the overlay files and apply them in order */
do {
struct fdt_header *blob;
char *overlayfile;
char *end;
int len;
/* Drop leading spaces */
while (*fdtoverlay == ' ')
++fdtoverlay;
/* Copy a single filename if multiple provided */
end = strstr(fdtoverlay, " ");
if (end) {
len = (int)(end - fdtoverlay);
overlayfile = malloc(len + 1);
strncpy(overlayfile, fdtoverlay, len);
overlayfile[len] = '\0';
} else
overlayfile = fdtoverlay;
if (!strlen(overlayfile))
goto skip_overlay;
/* Load overlay file */
err = get_relfile_envaddr(ctx, overlayfile, "fdtoverlay_addr_r",
NULL);
if (err < 0) {
printf("Failed loading overlay %s\n", overlayfile);
goto skip_overlay;
}
/* Resize main fdt */
fdt_shrink_to_minimum(working_fdt, 8192);
blob = map_sysmem(fdtoverlay_addr, 0);
err = fdt_check_header(blob);
if (err) {
printf("Invalid overlay %s, skipping\n",
overlayfile);
goto skip_overlay;
}
err = fdt_overlay_apply_verbose(working_fdt, blob);
if (err) {
printf("Failed to apply overlay %s, skipping\n",
overlayfile);
goto skip_overlay;
}
skip_overlay:
if (end)
free(overlayfile);
} while ((fdtoverlay = strstr(fdtoverlay, " ")));
}
#endif
/**
* label_boot() - Boot according to the contents of a pxe_label
*
* If we can't boot for any reason, we return. A successful boot never
* returns.
*
* The kernel will be stored in the location given by the 'kernel_addr_r'
* environment variable.
*
* If the label specifies an initrd file, it will be stored in the location
* given by the 'ramdisk_addr_r' environment variable.
*
* If the label specifies an 'append' line, its contents will overwrite that
* of the 'bootargs' environment variable.
*
* @ctx: PXE context
* @label: Label to process
* Returns does not return on success, otherwise returns 0 if a localboot
* label was processed, or 1 on error
*/
static int label_boot(struct pxe_context *ctx, struct pxe_label *label)
{
char *bootm_argv[] = { "bootm", NULL, NULL, NULL, NULL };
char *zboot_argv[] = { "zboot", NULL, "0", NULL, NULL };
char *kernel_addr = NULL;
char *initrd_addr_str = NULL;
char initrd_filesize[10];
char initrd_str[28];
char mac_str[29] = "";
char ip_str[68] = "";
char *fit_addr = NULL;
int bootm_argc = 2;
int zboot_argc = 3;
int len = 0;
ulong kernel_addr_r;
void *buf;
label_print(label);
label->attempted = 1;
if (label->localboot) {
if (label->localboot_val >= 0)
label_localboot(label);
return 0;
}
if (!label->kernel) {
printf("No kernel given, skipping %s\n",
label->name);
return 1;
}
if (get_relfile_envaddr(ctx, label->kernel, "kernel_addr_r",
NULL) < 0) {
printf("Skipping %s for failure retrieving kernel\n",
label->name);
return 1;
}
kernel_addr = env_get("kernel_addr_r");
/* for FIT, append the configuration identifier */
if (label->config) {
int len = strlen(kernel_addr) + strlen(label->config) + 1;
fit_addr = malloc(len);
if (!fit_addr) {
printf("malloc fail (FIT address)\n");
return 1;
}
snprintf(fit_addr, len, "%s%s", kernel_addr, label->config);
kernel_addr = fit_addr;
}
cmd: pxe: support INITRD and FDT selection with FIT Since the commit d5ba6188dfbf ("cmd: pxe_utils: Check fdtcontroladdr in label_boot") the FDT or the FDTDIR label is required in extlinux.conf and the fallback done by bootm command when only the device tree present in this command parameters is no more performed when FIT is used for kernel. When the label FDT or FDTDIR are absent or if the device tree file is absent, the PXE command in U-Boot uses the default U-Boot device tree selected by fdtcontroladdr = gd->fdt_blob, it is the "Scenario 3". With this scenario the bootm FIP fallback is no more possible with the extlinux.conf when only "kernel" label is present and is a FIP: kernel <path>#<conf>[#<extra-conf[#...]] As the U-Boot FDT is always provided in the third bootm argument, the device tree found in FIP is not used as fallback, it was done previously in boot_get_fdt(). This patch adds a new field kernel_label to save the full kernel label. The FDT bootm parameters use the kernel address (to avoid to load a second time the same FIP) and the config when this full label is reused for "fdt" or "initrd" label. This FIP support in extlinux.conf is restored when the "FDT" label can be found and select the same FIP (identical file and configuration): kernel <path>#<conf>[#<extra-conf[#...]] fdt <path>#<conf>[#<extra-conf[#...]] The patch add also this possibility for initrd. initrd <path>#<conf>[#<extra-conf[#...]] Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
2022-10-28 09:01:19 +00:00
/* For FIT, the label can be identical to kernel one */
if (label->initrd && !strcmp(label->kernel_label, label->initrd)) {
initrd_addr_str = kernel_addr;
} else if (label->initrd) {
ulong size;
if (get_relfile_envaddr(ctx, label->initrd, "ramdisk_addr_r",
&size) < 0) {
printf("Skipping %s for failure retrieving initrd\n",
label->name);
goto cleanup;
}
strcpy(initrd_filesize, simple_xtoa(size));
initrd_addr_str = env_get("ramdisk_addr_r");
size = snprintf(initrd_str, sizeof(initrd_str), "%s:%lx",
initrd_addr_str, size);
if (size >= sizeof(initrd_str))
goto cleanup;
}
if (label->ipappend & 0x1) {
sprintf(ip_str, " ip=%s:%s:%s:%s",
env_get("ipaddr"), env_get("serverip"),
env_get("gatewayip"), env_get("netmask"));
}
if (IS_ENABLED(CONFIG_CMD_NET)) {
if (label->ipappend & 0x2) {
int err;
strcpy(mac_str, " BOOTIF=");
err = format_mac_pxe(mac_str + 8, sizeof(mac_str) - 8);
if (err < 0)
mac_str[0] = '\0';
}
}
if ((label->ipappend & 0x3) || label->append) {
char bootargs[CONFIG_SYS_CBSIZE] = "";
char finalbootargs[CONFIG_SYS_CBSIZE];
if (strlen(label->append ?: "") +
strlen(ip_str) + strlen(mac_str) + 1 > sizeof(bootargs)) {
printf("bootarg overflow %zd+%zd+%zd+1 > %zd\n",
strlen(label->append ?: ""),
strlen(ip_str), strlen(mac_str),
sizeof(bootargs));
goto cleanup;
}
if (label->append)
strncpy(bootargs, label->append, sizeof(bootargs));
strcat(bootargs, ip_str);
strcat(bootargs, mac_str);
cli_simple_process_macros(bootargs, finalbootargs,
sizeof(finalbootargs));
env_set("bootargs", finalbootargs);
printf("append: %s\n", finalbootargs);
}
/*
* fdt usage is optional:
* It handles the following scenarios.
*
* Scenario 1: If fdt_addr_r specified and "fdt" or "fdtdir" label is
* defined in pxe file, retrieve fdt blob from server. Pass fdt_addr_r to
* bootm, and adjust argc appropriately.
*
* If retrieve fails and no exact fdt blob is specified in pxe file with
* "fdt" label, try Scenario 2.
*
* Scenario 2: If there is an fdt_addr specified, pass it along to
* bootm, and adjust argc appropriately.
*
* Scenario 3: If there is an fdtcontroladdr specified, pass it along to
* bootm, and adjust argc appropriately, unless the image type is fitImage.
*
* Scenario 4: fdt blob is not available.
*/
bootm_argv[3] = env_get("fdt_addr_r");
cmd: pxe: support INITRD and FDT selection with FIT Since the commit d5ba6188dfbf ("cmd: pxe_utils: Check fdtcontroladdr in label_boot") the FDT or the FDTDIR label is required in extlinux.conf and the fallback done by bootm command when only the device tree present in this command parameters is no more performed when FIT is used for kernel. When the label FDT or FDTDIR are absent or if the device tree file is absent, the PXE command in U-Boot uses the default U-Boot device tree selected by fdtcontroladdr = gd->fdt_blob, it is the "Scenario 3". With this scenario the bootm FIP fallback is no more possible with the extlinux.conf when only "kernel" label is present and is a FIP: kernel <path>#<conf>[#<extra-conf[#...]] As the U-Boot FDT is always provided in the third bootm argument, the device tree found in FIP is not used as fallback, it was done previously in boot_get_fdt(). This patch adds a new field kernel_label to save the full kernel label. The FDT bootm parameters use the kernel address (to avoid to load a second time the same FIP) and the config when this full label is reused for "fdt" or "initrd" label. This FIP support in extlinux.conf is restored when the "FDT" label can be found and select the same FIP (identical file and configuration): kernel <path>#<conf>[#<extra-conf[#...]] fdt <path>#<conf>[#<extra-conf[#...]] The patch add also this possibility for initrd. initrd <path>#<conf>[#<extra-conf[#...]] Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
2022-10-28 09:01:19 +00:00
/* For FIT, the label can be identical to kernel one */
if (label->fdt && !strcmp(label->kernel_label, label->fdt)) {
bootm_argv[3] = kernel_addr;
/* if fdt label is defined then get fdt from server */
cmd: pxe: support INITRD and FDT selection with FIT Since the commit d5ba6188dfbf ("cmd: pxe_utils: Check fdtcontroladdr in label_boot") the FDT or the FDTDIR label is required in extlinux.conf and the fallback done by bootm command when only the device tree present in this command parameters is no more performed when FIT is used for kernel. When the label FDT or FDTDIR are absent or if the device tree file is absent, the PXE command in U-Boot uses the default U-Boot device tree selected by fdtcontroladdr = gd->fdt_blob, it is the "Scenario 3". With this scenario the bootm FIP fallback is no more possible with the extlinux.conf when only "kernel" label is present and is a FIP: kernel <path>#<conf>[#<extra-conf[#...]] As the U-Boot FDT is always provided in the third bootm argument, the device tree found in FIP is not used as fallback, it was done previously in boot_get_fdt(). This patch adds a new field kernel_label to save the full kernel label. The FDT bootm parameters use the kernel address (to avoid to load a second time the same FIP) and the config when this full label is reused for "fdt" or "initrd" label. This FIP support in extlinux.conf is restored when the "FDT" label can be found and select the same FIP (identical file and configuration): kernel <path>#<conf>[#<extra-conf[#...]] fdt <path>#<conf>[#<extra-conf[#...]] The patch add also this possibility for initrd. initrd <path>#<conf>[#<extra-conf[#...]] Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
2022-10-28 09:01:19 +00:00
} else if (bootm_argv[3]) {
char *fdtfile = NULL;
char *fdtfilefree = NULL;
if (label->fdt) {
fdtfile = label->fdt;
} else if (label->fdtdir) {
char *f1, *f2, *f3, *f4, *slash;
f1 = env_get("fdtfile");
if (f1) {
f2 = "";
f3 = "";
f4 = "";
} else {
/*
* For complex cases where this code doesn't
* generate the correct filename, the board
* code should set $fdtfile during early boot,
* or the boot scripts should set $fdtfile
* before invoking "pxe" or "sysboot".
*/
f1 = env_get("soc");
f2 = "-";
f3 = env_get("board");
f4 = ".dtb";
if (!f1) {
f1 = "";
f2 = "";
}
if (!f3) {
f2 = "";
f3 = "";
}
}
len = strlen(label->fdtdir);
if (!len)
slash = "./";
else if (label->fdtdir[len - 1] != '/')
slash = "/";
else
slash = "";
len = strlen(label->fdtdir) + strlen(slash) +
strlen(f1) + strlen(f2) + strlen(f3) +
strlen(f4) + 1;
fdtfilefree = malloc(len);
if (!fdtfilefree) {
printf("malloc fail (FDT filename)\n");
goto cleanup;
}
snprintf(fdtfilefree, len, "%s%s%s%s%s%s",
label->fdtdir, slash, f1, f2, f3, f4);
fdtfile = fdtfilefree;
}
if (fdtfile) {
int err = get_relfile_envaddr(ctx, fdtfile,
"fdt_addr_r", NULL);
free(fdtfilefree);
if (err < 0) {
bootm_argv[3] = NULL;
if (label->fdt) {
printf("Skipping %s for failure retrieving FDT\n",
label->name);
goto cleanup;
}
}
if (label->kaslrseed)
label_boot_kaslrseed();
#ifdef CONFIG_OF_LIBFDT_OVERLAY
if (label->fdtoverlays)
label_boot_fdtoverlay(ctx, label);
#endif
} else {
bootm_argv[3] = NULL;
}
}
bootm_argv[1] = kernel_addr;
zboot_argv[1] = kernel_addr;
if (initrd_addr_str) {
bootm_argv[2] = initrd_str;
bootm_argc = 3;
zboot_argv[3] = initrd_addr_str;
zboot_argv[4] = initrd_filesize;
zboot_argc = 5;
}
if (!bootm_argv[3])
bootm_argv[3] = env_get("fdt_addr");
kernel_addr_r = genimg_get_kernel_addr(kernel_addr);
buf = map_sysmem(kernel_addr_r, 0);
if (!bootm_argv[3] && genimg_get_format(buf) != IMAGE_FORMAT_FIT)
bootm_argv[3] = env_get("fdtcontroladdr");
if (bootm_argv[3]) {
if (!bootm_argv[2])
bootm_argv[2] = "-";
bootm_argc = 4;
}
/* Try bootm for legacy and FIT format image */
if (genimg_get_format(buf) != IMAGE_FORMAT_INVALID &&
IS_ENABLED(CONFIG_CMD_BOOTM))
do_bootm(ctx->cmdtp, 0, bootm_argc, bootm_argv);
/* Try booting an AArch64 Linux kernel image */
else if (IS_ENABLED(CONFIG_CMD_BOOTI))
do_booti(ctx->cmdtp, 0, bootm_argc, bootm_argv);
/* Try booting a Image */
else if (IS_ENABLED(CONFIG_CMD_BOOTZ))
do_bootz(ctx->cmdtp, 0, bootm_argc, bootm_argv);
/* Try booting an x86_64 Linux kernel image */
else if (IS_ENABLED(CONFIG_CMD_ZBOOT))
do_zboot_parent(ctx->cmdtp, 0, zboot_argc, zboot_argv, NULL);
unmap_sysmem(buf);
cleanup:
free(fit_addr);
return 1;
}
/** enum token_type - Tokens for the pxe file parser */
enum token_type {
T_EOL,
T_STRING,
T_EOF,
T_MENU,
T_TITLE,
T_TIMEOUT,
T_LABEL,
T_KERNEL,
T_LINUX,
T_APPEND,
T_INITRD,
T_LOCALBOOT,
T_DEFAULT,
T_PROMPT,
T_INCLUDE,
T_FDT,
T_FDTDIR,
T_FDTOVERLAYS,
T_ONTIMEOUT,
T_IPAPPEND,
T_BACKGROUND,
T_KASLRSEED,
T_INVALID
};
/** struct token - token - given by a value and a type */
struct token {
char *val;
enum token_type type;
};
/* Keywords recognized */
static const struct token keywords[] = {
{"menu", T_MENU},
{"title", T_TITLE},
{"timeout", T_TIMEOUT},
{"default", T_DEFAULT},
{"prompt", T_PROMPT},
{"label", T_LABEL},
{"kernel", T_KERNEL},
{"linux", T_LINUX},
{"localboot", T_LOCALBOOT},
{"append", T_APPEND},
{"initrd", T_INITRD},
{"include", T_INCLUDE},
{"devicetree", T_FDT},
{"fdt", T_FDT},
{"devicetreedir", T_FDTDIR},
{"fdtdir", T_FDTDIR},
{"fdtoverlays", T_FDTOVERLAYS},
{"devicetree-overlay", T_FDTOVERLAYS},
{"ontimeout", T_ONTIMEOUT,},
{"ipappend", T_IPAPPEND,},
{"background", T_BACKGROUND,},
{"kaslrseed", T_KASLRSEED,},
{NULL, T_INVALID}
};
/**
* enum lex_state - lexer state
*
* Since pxe(linux) files don't have a token to identify the start of a
* literal, we have to keep track of when we're in a state where a literal is
* expected vs when we're in a state a keyword is expected.
*/
enum lex_state {
L_NORMAL = 0,
L_KEYWORD,
L_SLITERAL
};
/**
* get_string() - retrieves a string from *p and stores it as a token in *t.
*
* This is used for scanning both string literals and keywords.
*
* Characters from *p are copied into t-val until a character equal to
* delim is found, or a NUL byte is reached. If delim has the special value of
* ' ', any whitespace character will be used as a delimiter.
*
* If lower is unequal to 0, uppercase characters will be converted to
* lowercase in the result. This is useful to make keywords case
* insensitive.
*
* The location of *p is updated to point to the first character after the end
* of the token - the ending delimiter.
*
* Memory for t->val is allocated using malloc and must be free()'d to reclaim
* it.
*
* @p: Points to a pointer to the current position in the input being processed.
* Updated to point at the first character after the current token
* @t: Pointers to a token to fill in
* @delim: Delimiter character to look for, either newline or space
* @lower: true to convert the string to lower case when storing
* Returns the new value of t->val, on success, NULL if out of memory
*/
static char *get_string(char **p, struct token *t, char delim, int lower)
{
char *b, *e;
size_t len, i;
/*
* b and e both start at the beginning of the input stream.
*
* e is incremented until we find the ending delimiter, or a NUL byte
* is reached. Then, we take e - b to find the length of the token.
*/
b = *p;
e = *p;
while (*e) {
if ((delim == ' ' && isspace(*e)) || delim == *e)
break;
e++;
}
len = e - b;
/*
* Allocate memory to hold the string, and copy it in, converting
* characters to lowercase if lower is != 0.
*/
t->val = malloc(len + 1);
if (!t->val)
return NULL;
for (i = 0; i < len; i++, b++) {
if (lower)
t->val[i] = tolower(*b);
else
t->val[i] = *b;
}
t->val[len] = '\0';
/* Update *p so the caller knows where to continue scanning */
*p = e;
t->type = T_STRING;
return t->val;
}
/**
* get_keyword() - Populate a keyword token with a type and value
*
* Updates the ->type field based on the keyword string in @val
* @t: Token to populate
*/
static void get_keyword(struct token *t)
{
int i;
for (i = 0; keywords[i].val; i++) {
if (!strcmp(t->val, keywords[i].val)) {
t->type = keywords[i].type;
break;
}
}
}
/**
* get_token() - Get the next token
*
* We have to keep track of which state we're in to know if we're looking to get
* a string literal or a keyword.
*
* @p: Points to a pointer to the current position in the input being processed.
* Updated to point at the first character after the current token
*/
static void get_token(char **p, struct token *t, enum lex_state state)
{
char *c = *p;
t->type = T_INVALID;
/* eat non EOL whitespace */
while (isblank(*c))
c++;
/*
* eat comments. note that string literals can't begin with #, but
* can contain a # after their first character.
*/
if (*c == '#') {
while (*c && *c != '\n')
c++;
}
if (*c == '\n') {
t->type = T_EOL;
c++;
} else if (*c == '\0') {
t->type = T_EOF;
c++;
} else if (state == L_SLITERAL) {
get_string(&c, t, '\n', 0);
} else if (state == L_KEYWORD) {
/*
* when we expect a keyword, we first get the next string
* token delimited by whitespace, and then check if it
* matches a keyword in our keyword list. if it does, it's
* converted to a keyword token of the appropriate type, and
* if not, it remains a string token.
*/
get_string(&c, t, ' ', 1);
get_keyword(t);
}
*p = c;
}
/**
* eol_or_eof() - Find end of line
*
* Increment *c until we get to the end of the current line, or EOF
*
* @c: Points to a pointer to the current position in the input being processed.
* Updated to point at the first character after the current token
*/
static void eol_or_eof(char **c)
{
while (**c && **c != '\n')
(*c)++;
}
/*
* All of these parse_* functions share some common behavior.
*
* They finish with *c pointing after the token they parse, and return 1 on
* success, or < 0 on error.
*/
/*
* Parse a string literal and store a pointer it at *dst. String literals
* terminate at the end of the line.
*/
static int parse_sliteral(char **c, char **dst)
{
struct token t;
char *s = *c;
get_token(c, &t, L_SLITERAL);
if (t.type != T_STRING) {
printf("Expected string literal: %.*s\n", (int)(*c - s), s);
return -EINVAL;
}
*dst = t.val;
return 1;
}
/*
* Parse a base 10 (unsigned) integer and store it at *dst.
*/
static int parse_integer(char **c, int *dst)
{
struct token t;
char *s = *c;
get_token(c, &t, L_SLITERAL);
if (t.type != T_STRING) {
printf("Expected string: %.*s\n", (int)(*c - s), s);
return -EINVAL;
}
*dst = simple_strtol(t.val, NULL, 10);
free(t.val);
return 1;
}
static int parse_pxefile_top(struct pxe_context *ctx, char *p, ulong base,
struct pxe_menu *cfg, int nest_level);
/*
* Parse an include statement, and retrieve and parse the file it mentions.
*
* base should point to a location where it's safe to store the file, and
* nest_level should indicate how many nested includes have occurred. For this
* include, nest_level has already been incremented and doesn't need to be
* incremented here.
*/
static int handle_include(struct pxe_context *ctx, char **c, unsigned long base,
struct pxe_menu *cfg, int nest_level)
{
char *include_path;
char *s = *c;
int err;
char *buf;
int ret;
err = parse_sliteral(c, &include_path);
if (err < 0) {
printf("Expected include path: %.*s\n", (int)(*c - s), s);
return err;
}
err = get_pxe_file(ctx, include_path, base);
if (err < 0) {
printf("Couldn't retrieve %s\n", include_path);
return err;
}
buf = map_sysmem(base, 0);
ret = parse_pxefile_top(ctx, buf, base, cfg, nest_level);
unmap_sysmem(buf);
return ret;
}
/*
* Parse lines that begin with 'menu'.
*
* base and nest are provided to handle the 'menu include' case.
*
* base should point to a location where it's safe to store the included file.
*
* nest_level should be 1 when parsing the top level pxe file, 2 when parsing
* a file it includes, 3 when parsing a file included by that file, and so on.
*/
static int parse_menu(struct pxe_context *ctx, char **c, struct pxe_menu *cfg,
unsigned long base, int nest_level)
{
struct token t;
char *s = *c;
int err = 0;
get_token(c, &t, L_KEYWORD);
switch (t.type) {
case T_TITLE:
err = parse_sliteral(c, &cfg->title);
break;
case T_INCLUDE:
err = handle_include(ctx, c, base, cfg, nest_level + 1);
break;
case T_BACKGROUND:
err = parse_sliteral(c, &cfg->bmp);
break;
default:
printf("Ignoring malformed menu command: %.*s\n",
(int)(*c - s), s);
}
if (err < 0)
return err;
eol_or_eof(c);
return 1;
}
/*
* Handles parsing a 'menu line' when we're parsing a label.
*/
static int parse_label_menu(char **c, struct pxe_menu *cfg,
struct pxe_label *label)
{
struct token t;
char *s;
s = *c;
get_token(c, &t, L_KEYWORD);
switch (t.type) {
case T_DEFAULT:
if (!cfg->default_label)
cfg->default_label = strdup(label->name);
if (!cfg->default_label)
return -ENOMEM;
break;
case T_LABEL:
parse_sliteral(c, &label->menu);
break;
default:
printf("Ignoring malformed menu command: %.*s\n",
(int)(*c - s), s);
}
eol_or_eof(c);
return 0;
}
/*
* Handles parsing a 'kernel' label.
* expecting "filename" or "<fit_filename>#cfg"
*/
static int parse_label_kernel(char **c, struct pxe_label *label)
{
char *s;
int err;
err = parse_sliteral(c, &label->kernel);
if (err < 0)
return err;
cmd: pxe: support INITRD and FDT selection with FIT Since the commit d5ba6188dfbf ("cmd: pxe_utils: Check fdtcontroladdr in label_boot") the FDT or the FDTDIR label is required in extlinux.conf and the fallback done by bootm command when only the device tree present in this command parameters is no more performed when FIT is used for kernel. When the label FDT or FDTDIR are absent or if the device tree file is absent, the PXE command in U-Boot uses the default U-Boot device tree selected by fdtcontroladdr = gd->fdt_blob, it is the "Scenario 3". With this scenario the bootm FIP fallback is no more possible with the extlinux.conf when only "kernel" label is present and is a FIP: kernel <path>#<conf>[#<extra-conf[#...]] As the U-Boot FDT is always provided in the third bootm argument, the device tree found in FIP is not used as fallback, it was done previously in boot_get_fdt(). This patch adds a new field kernel_label to save the full kernel label. The FDT bootm parameters use the kernel address (to avoid to load a second time the same FIP) and the config when this full label is reused for "fdt" or "initrd" label. This FIP support in extlinux.conf is restored when the "FDT" label can be found and select the same FIP (identical file and configuration): kernel <path>#<conf>[#<extra-conf[#...]] fdt <path>#<conf>[#<extra-conf[#...]] The patch add also this possibility for initrd. initrd <path>#<conf>[#<extra-conf[#...]] Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
2022-10-28 09:01:19 +00:00
/* copy the kernel label to compare with FDT / INITRD when FIT is used */
label->kernel_label = strdup(label->kernel);
if (!label->kernel_label)
return -ENOMEM;
s = strstr(label->kernel, "#");
if (!s)
return 1;
label->config = strdup(s);
if (!label->config)
return -ENOMEM;
*s = 0;
return 1;
}
/*
* Parses a label and adds it to the list of labels for a menu.
*
* A label ends when we either get to the end of a file, or
* get some input we otherwise don't have a handler defined
* for.
*
*/
static int parse_label(char **c, struct pxe_menu *cfg)
{
struct token t;
int len;
char *s = *c;
struct pxe_label *label;
int err;
label = label_create();
if (!label)
return -ENOMEM;
err = parse_sliteral(c, &label->name);
if (err < 0) {
printf("Expected label name: %.*s\n", (int)(*c - s), s);
label_destroy(label);
return -EINVAL;
}
list_add_tail(&label->list, &cfg->labels);
while (1) {
s = *c;
get_token(c, &t, L_KEYWORD);
err = 0;
switch (t.type) {
case T_MENU:
err = parse_label_menu(c, cfg, label);
break;
case T_KERNEL:
case T_LINUX:
err = parse_label_kernel(c, label);
break;
case T_APPEND:
err = parse_sliteral(c, &label->append);
if (label->initrd)
break;
s = strstr(label->append, "initrd=");
if (!s)
break;
s += 7;
len = (int)(strchr(s, ' ') - s);
label->initrd = malloc(len + 1);
strncpy(label->initrd, s, len);
label->initrd[len] = '\0';
break;
case T_INITRD:
if (!label->initrd)
err = parse_sliteral(c, &label->initrd);
break;
case T_FDT:
if (!label->fdt)
err = parse_sliteral(c, &label->fdt);
break;
case T_FDTDIR:
if (!label->fdtdir)
err = parse_sliteral(c, &label->fdtdir);
break;
case T_FDTOVERLAYS:
if (!label->fdtoverlays)
err = parse_sliteral(c, &label->fdtoverlays);
break;
case T_LOCALBOOT:
label->localboot = 1;
err = parse_integer(c, &label->localboot_val);
break;
case T_IPAPPEND:
err = parse_integer(c, &label->ipappend);
break;
case T_KASLRSEED:
label->kaslrseed = 1;
break;
case T_EOL:
break;
default:
/*
* put the token back! we don't want it - it's the end
* of a label and whatever token this is, it's
* something for the menu level context to handle.
*/
*c = s;
return 1;
}
if (err < 0)
return err;
}
}
/*
* This 16 comes from the limit pxelinux imposes on nested includes.
*
* There is no reason at all we couldn't do more, but some limit helps prevent
* infinite (until crash occurs) recursion if a file tries to include itself.
*/
#define MAX_NEST_LEVEL 16
/*
* Entry point for parsing a menu file. nest_level indicates how many times
* we've nested in includes. It will be 1 for the top level menu file.
*
* Returns 1 on success, < 0 on error.
*/
static int parse_pxefile_top(struct pxe_context *ctx, char *p, unsigned long base,
struct pxe_menu *cfg, int nest_level)
{
struct token t;
char *s, *b, *label_name;
int err;
b = p;
if (nest_level > MAX_NEST_LEVEL) {
printf("Maximum nesting (%d) exceeded\n", MAX_NEST_LEVEL);
return -EMLINK;
}
while (1) {
s = p;
get_token(&p, &t, L_KEYWORD);
err = 0;
switch (t.type) {
case T_MENU:
cfg->prompt = 1;
err = parse_menu(ctx, &p, cfg,
base + ALIGN(strlen(b) + 1, 4),
nest_level);
break;
case T_TIMEOUT:
err = parse_integer(&p, &cfg->timeout);
break;
case T_LABEL:
err = parse_label(&p, cfg);
break;
case T_DEFAULT:
case T_ONTIMEOUT:
err = parse_sliteral(&p, &label_name);
if (label_name) {
if (cfg->default_label)
free(cfg->default_label);
cfg->default_label = label_name;
}
break;
case T_INCLUDE:
err = handle_include(ctx, &p,
base + ALIGN(strlen(b), 4), cfg,
nest_level + 1);
break;
case T_PROMPT:
err = parse_integer(&p, &cfg->prompt);
// Do not fail if prompt configuration is undefined
if (err < 0)
eol_or_eof(&p);
break;
case T_EOL:
break;
case T_EOF:
return 1;
default:
printf("Ignoring unknown command: %.*s\n",
(int)(p - s), s);
eol_or_eof(&p);
}
if (err < 0)
return err;
}
}
/*
*/
void destroy_pxe_menu(struct pxe_menu *cfg)
{
struct list_head *pos, *n;
struct pxe_label *label;
free(cfg->title);
free(cfg->default_label);
list_for_each_safe(pos, n, &cfg->labels) {
label = list_entry(pos, struct pxe_label, list);
label_destroy(label);
}
free(cfg);
}
struct pxe_menu *parse_pxefile(struct pxe_context *ctx, unsigned long menucfg)
{
struct pxe_menu *cfg;
char *buf;
int r;
cfg = malloc(sizeof(struct pxe_menu));
if (!cfg)
return NULL;
memset(cfg, 0, sizeof(struct pxe_menu));
INIT_LIST_HEAD(&cfg->labels);
buf = map_sysmem(menucfg, 0);
r = parse_pxefile_top(ctx, buf, menucfg, cfg, 1);
unmap_sysmem(buf);
if (r < 0) {
destroy_pxe_menu(cfg);
return NULL;
}
return cfg;
}
/*
* Converts a pxe_menu struct into a menu struct for use with U-Boot's generic
* menu code.
*/
static struct menu *pxe_menu_to_menu(struct pxe_menu *cfg)
{
struct pxe_label *label;
struct list_head *pos;
struct menu *m;
char *label_override;
int err;
int i = 1;
char *default_num = NULL;
char *override_num = NULL;
/*
* Create a menu and add items for all the labels.
*/
m = menu_create(cfg->title, DIV_ROUND_UP(cfg->timeout, 10),
cfg->prompt, NULL, label_print, NULL, NULL);
if (!m)
return NULL;
label_override = env_get("pxe_label_override");
list_for_each(pos, &cfg->labels) {
label = list_entry(pos, struct pxe_label, list);
sprintf(label->num, "%d", i++);
if (menu_item_add(m, label->num, label) != 1) {
menu_destroy(m);
return NULL;
}
if (cfg->default_label &&
(strcmp(label->name, cfg->default_label) == 0))
default_num = label->num;
if (label_override && !strcmp(label->name, label_override))
override_num = label->num;
}
if (label_override) {
if (override_num)
default_num = override_num;
else
printf("Missing override pxe label: %s\n",
label_override);
}
/*
* After we've created items for each label in the menu, set the
* menu's default label if one was specified.
*/
if (default_num) {
err = menu_default_set(m, default_num);
if (err != 1) {
if (err != -ENOENT) {
menu_destroy(m);
return NULL;
}
printf("Missing default: %s\n", cfg->default_label);
}
}
return m;
}
/*
* Try to boot any labels we have yet to attempt to boot.
*/
static void boot_unattempted_labels(struct pxe_context *ctx,
struct pxe_menu *cfg)
{
struct list_head *pos;
struct pxe_label *label;
list_for_each(pos, &cfg->labels) {
label = list_entry(pos, struct pxe_label, list);
if (!label->attempted)
label_boot(ctx, label);
}
}
void handle_pxe_menu(struct pxe_context *ctx, struct pxe_menu *cfg)
{
void *choice;
struct menu *m;
int err;
if (IS_ENABLED(CONFIG_CMD_BMP)) {
/* display BMP if available */
if (cfg->bmp) {
if (get_relfile(ctx, cfg->bmp, image_load_addr, NULL)) {
#if defined(CONFIG_VIDEO)
struct udevice *dev;
err = uclass_first_device_err(UCLASS_VIDEO, &dev);
if (!err)
video_clear(dev);
#endif
bmp_display(image_load_addr,
BMP_ALIGN_CENTER, BMP_ALIGN_CENTER);
} else {
printf("Skipping background bmp %s for failure\n",
cfg->bmp);
}
}
}
m = pxe_menu_to_menu(cfg);
if (!m)
return;
err = menu_get_choice(m, &choice);
menu_destroy(m);
/*
* err == 1 means we got a choice back from menu_get_choice.
*
* err == -ENOENT if the menu was setup to select the default but no
* default was set. in that case, we should continue trying to boot
* labels that haven't been attempted yet.
*
* otherwise, the user interrupted or there was some other error and
* we give up.
*/
if (err == 1) {
err = label_boot(ctx, choice);
if (!err)
return;
} else if (err != -ENOENT) {
return;
}
boot_unattempted_labels(ctx, cfg);
}
int pxe_setup_ctx(struct pxe_context *ctx, struct cmd_tbl *cmdtp,
pxe_getfile_func getfile, void *userdata,
bool allow_abs_path, const char *bootfile, bool use_ipv6)
{
const char *last_slash;
size_t path_len = 0;
memset(ctx, '\0', sizeof(*ctx));
ctx->cmdtp = cmdtp;
ctx->getfile = getfile;
ctx->userdata = userdata;
ctx->allow_abs_path = allow_abs_path;
ctx->use_ipv6 = use_ipv6;
/* figure out the boot directory, if there is one */
if (bootfile && strlen(bootfile) >= MAX_TFTP_PATH_LEN)
return -ENOSPC;
ctx->bootdir = strdup(bootfile ? bootfile : "");
if (!ctx->bootdir)
return -ENOMEM;
if (bootfile) {
last_slash = strrchr(bootfile, '/');
if (last_slash)
path_len = (last_slash - bootfile) + 1;
}
ctx->bootdir[path_len] = '\0';
return 0;
}
void pxe_destroy_ctx(struct pxe_context *ctx)
{
free(ctx->bootdir);
}
int pxe_process(struct pxe_context *ctx, ulong pxefile_addr_r, bool prompt)
{
struct pxe_menu *cfg;
cfg = parse_pxefile(ctx, pxefile_addr_r);
if (!cfg) {
printf("Error parsing config file\n");
return 1;
}
if (prompt)
cfg->prompt = 1;
handle_pxe_menu(ctx, cfg);
destroy_pxe_menu(cfg);
return 0;
}