u-boot/include/renesas/ddr_ctrl.h

/* SPDX-License-Identifier: BSD-2-Clause */
/*
 * Cadence DDR Controller
 *
 * Copyright (C) 2015 Renesas Electronics Europe Ltd
 */

#ifndef CADENCE_DDR_CTRL_H
#define CADENCE_DDR_CTRL_H

enum cdns_ddr_range_prot {
	CDNS_DDR_RANGE_PROT_BITS_PRIV_SECURE = 0,
	CDNS_DDR_RANGE_PROT_BITS_SECURE = 1,
	CDNS_DDR_RANGE_PROT_BITS_PRIV = 2,
	CDNS_DDR_RANGE_PROT_BITS_FULL = 3,
};

/**
 * Initialise the Cadence DDR Controller, but doesn't start it.
 *
 * It sets up the controller so that all 4 AXI slave ports allow access to all
 * of the DDR with the same settings. This means that:
 *  - Full access permisions.
 *  - All read/write priorities are set to 2.
 *  - Bandwidth is set to 50%, overflow is allowed, i.e. it's a soft limit.
 * If you want different properties for different ports and/or addr ranges, call
 * the other functions before calling cdns_ddr_ctrl_start().
 *
 * @ddr_ctrl_base  Physical address of the DDR Controller.
 * @async          0 if DDR clock is synchronous with the controller clock
 *                 otherwise 1.
 * @reg0           Pointer to array of 32-bit values to be written to registers
 *                 0 to 87. The values are generated by Cadence TCL scripts.
 * @reg350         Pointer to array of 32-bit values to be written to registers
 *                 350 to 374. The values are generated by Cadence TCL scripts.
 * @ddr_start_addr Physical address of the start of DDR.
 * @ddr_size       Size of the DDR in bytes. The controller will set the port
 *                 protection range to match this size.
 * @enable_ecc     0 to disable ECC, 1 to enable it.
 * @enable_8bit    0 to use 16-bit bus width, 1 to use 8-bit bus width.
 */
void cdns_ddr_ctrl_init(void *ddr_ctrl_base, int async,
			const u32 *reg0, const u32 *reg350,
			u32 ddr_start_addr, u32 ddr_size,
			int enable_ecc, int enable_8bit);

/**
 * Start the Cadence DDR Controller.
 *
 * @ddr_ctrl_base  Physical address of the DDR Controller.
 */
void cdns_ddr_ctrl_start(void *ddr_ctrl_base);

/**
 * Set the priority for read and write operations for a specific AXI slave port.
 *
 * @base      Physical address of the DDR Controller.
 * @port      Port number. Range is 0 to 3.
 * @read_pri  Priority for reads.  Range is 0 to 3, where 0 is highest priority.
 * @write_pri Priority for writes. Range is 0 to 3, where 0 is highest priority.
 */
void cdns_ddr_set_port_rw_priority(void *base, int port,
				   u8 read_pri, u8 write_pri);

/**
 * Specify address range for a protection entry, for a specific AXI slave port.
 *
 * @base       Physical address of the DDR Controller.
 * @port       Port number. Range is 0 to 3.
 * @entry      The protection entry. Range is 0 to 15.
 * @start_addr Physical of the address range, must be aligned to 16KB.
 * @size       Size of the address range, must be multiple of 16KB.
 */
void cdns_ddr_enable_port_addr_range(void *base, int port, int entry,
				     u32 addr_start, u32 size);

/**
 * Specify address range for a protection entry, for all AXI slave ports.
 *
 * @base       Physical address of the DDR Controller.
 * @entry      The protection entry. Range is 0 to 15.
 * @start_addr Physical of the address range, must be aligned to 16KB.
 * @size       Size of the address range, must be multiple of 16KB.
 */
void cdns_ddr_enable_addr_range(void *base, int entry,
				u32 addr_start, u32 size);

/**
 * Specify protection entry details, for a specific AXI slave port.
 *
 * See the hardware manual for details of the range check bits.
 *
 * @base       Physical address of the DDR Controller.
 * @port       Port number. Range is 0 to 3.
 * @entry      The protection entry. Range is 0 to 15.
 */
void cdns_ddr_enable_port_prot(void *base, int port, int entry,
			       enum cdns_ddr_range_prot range_protection_bits,
			       u16 range_RID_check_bits,
			       u16 range_WID_check_bits,
			       u8 range_RID_check_bits_ID_lookup,
			       u8 range_WID_check_bits_ID_lookup);

/**
 * Specify protection entry details, for all AXI slave ports.
 *
 * See the hardware manual for details of the range check bits.
 *
 * @base       Physical address of the DDR Controller.
 * @entry      The protection entry. Range is 0 to 15.
 */
void cdns_ddr_enable_prot(void *base, int entry,
			  enum cdns_ddr_range_prot range_protection_bits,
			  u16 range_RID_check_bits,
			  u16 range_WID_check_bits,
			  u8 range_RID_check_bits_ID_lookup,
			  u8 range_WID_check_bits_ID_lookup);

/**
 * Specify bandwidth for each AXI port.
 *
 * See the hardware manual for details of the range check bits.
 *
 * @base       Physical address of the DDR Controller.
 * @port       Port number. Range is 0 to 3.
 * @max_percent     0 to 100.
 */
void cdns_ddr_set_port_bandwidth(void *base, int port,
				 u8 max_percent, u8 overflow_ok);

/* Standard JEDEC registers */
#define MODE_REGISTER_MASK		(3 << 14)
#define MODE_REGISTER_MR0		(0 << 14)
#define MODE_REGISTER_MR1		(1 << 14)
#define MODE_REGISTER_MR2		(2 << 14)
#define MODE_REGISTER_MR3		(3 << 14)
#define MR1_DRIVE_STRENGTH_MASK		((1 << 5) | (1 << 1))
#define MR1_DRIVE_STRENGTH_34_OHMS	((0 << 5) | (1 << 1))
#define MR1_DRIVE_STRENGTH_40_OHMS	((0 << 5) | (0 << 1))
#define MR1_ODT_IMPEDANCE_MASK		((1 << 9) | (1 << 6) | (1 << 2))
#define MR1_ODT_IMPEDANCE_60_OHMS	((0 << 9) | (0 << 6) | (1 << 2))
#define MR1_ODT_IMPEDANCE_120_OHMS	((0 << 9) | (1 << 6) | (0 << 2))
#define MR1_ODT_IMPEDANCE_40_OHMS	((0 << 9) | (1 << 6) | (1 << 2))
#define MR1_ODT_IMPEDANCE_20_OHMS	((1 << 9) | (0 << 6) | (0 << 2))
#define MR1_ODT_IMPEDANCE_30_OHMS	((1 << 9) | (0 << 6) | (1 << 2))
#define MR2_DYNAMIC_ODT_MASK		(3 << 9)
#define MR2_DYNAMIC_ODT_OFF		(0 << 9)
#define MR2_SELF_REFRESH_TEMP_MASK	(1 << 7)
#define MR2_SELF_REFRESH_TEMP_EXT	(1 << 7)

/**
 * Set certain fields of the JEDEC MR1 register.
 */
void cdns_ddr_set_mr1(void *base, int cs, u16 odt_impedance, u16 drive_strength);

/**
 * Set certain fields of the JEDEC MR2 register.
 */
void cdns_ddr_set_mr2(void *base, int cs, u16 dynamic_odt, u16 self_refresh_temp);

/**
 * Set ODT map of the DDR Controller.
 */
void cdns_ddr_set_odt_map(void *base, int cs, u16 odt_map);

/**
 * Set ODT settings in the DDR Controller.
 */
void cdns_ddr_set_odt_times(void *base, u8 TODTL_2CMD, u8 TODTH_WR, u8 TODTH_RD,
			    u8 WR_TO_ODTH, u8 RD_TO_ODTH);

void cdns_ddr_set_same_cs_delays(void *base, u8 r2r, u8 r2w, u8 w2r, u8 w2w);
void cdns_ddr_set_diff_cs_delays(void *base, u8 r2r, u8 r2w, u8 w2r, u8 w2w);

#endif