u-boot/arch/x86/lib/Makefile

98 lines
2.3 KiB
Makefile
Raw Normal View History

# SPDX-License-Identifier: GPL-2.0+
#
# (C) Copyright 2002-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
ifndef CONFIG_X86_64
ifndef CONFIG_TPL_BUILD
obj-y += bios.o
obj-y += bios_asm.o
obj-y += bios_interrupts.o
endif
obj-y += string.o
endif
ifndef CONFIG_SPL_BUILD
obj-$(CONFIG_CMD_BOOTM) += bootm.o
endif
obj-y += cmd_boot.o
obj-$(CONFIG_SEABIOS) += coreboot_table.o
obj-y += early_cmos.o
obj-y += e820.o
obj-y += init_helpers.o
obj-y += interrupts.o
obj-y += lpc-uclass.o
obj-y += mpspec.o
obj-$(CONFIG_ENABLE_MRC_CACHE) += mrccache.o
obj-y += northbridge-uclass.o
obj-$(CONFIG_I8259_PIC) += i8259.o
obj-$(CONFIG_I8254_TIMER) += i8254.o
obj-$(CONFIG_PINCTRL_ICH6) += pinctrl_ich6.o
obj-y += pirq_routing.o
obj-y += relocate.o
obj-y += physmem.o
obj-$(CONFIG_INTEL_MID) += pmu.o
x86: ivybridge: Implement SDRAM init Implement SDRAM init using the Memory Reference Code (mrc.bin) provided in the board directory and the SDRAM SPD information in the device tree. This also needs the Intel Management Engine (me.bin) to work. Binary blobs everywhere: so far we have MRC, ME and microcode. SDRAM init works by setting up various parameters and calling the MRC. This in turn does some sort of magic to work out how much memory there is and the timing parameters to use. It also sets up the DRAM controllers. When the MRC returns, we use the information it provides to map out the available memory in U-Boot. U-Boot normally moves itself to the top of RAM. On x86 the RAM is not generally contiguous, and anyway some RAM may be above 4GB which doesn't work in 32-bit mode. So we relocate to the top of the largest block of RAM we can find below 4GB. Memory above 4GB is accessible with special functions (see physmem). It would be possible to build U-Boot in 64-bit mode but this wouldn't necessarily provide any more memory, since the largest block is often below 4GB. Anyway U-Boot doesn't need huge amounts of memory - even a very large ramdisk seldom exceeds 100-200MB. U-Boot has support for booting 64-bit kernels directly so this does not pose a limitation in that area. Also there are probably parts of U-Boot that will not work correctly in 64-bit mode. The MRC is one. There is some work remaining in this area. Since memory init is very slow (over 500ms) it is possible to save the parameters in SPI flash to speed it up next time. Suspend/resume support is not fully implemented, or at least it is not efficient. With this patch, link boots to a prompt. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-13 05:42:28 +00:00
obj-$(CONFIG_X86_RAMTEST) += ramtest.o
obj-$(CONFIG_INTEL_MID) += scu.o
obj-y += sections.o
obj-y += sfi.o
obj-y += acpi.o
obj-$(CONFIG_HAVE_ACPI_RESUME) += acpi_s3.o
ifndef CONFIG_QEMU
obj-$(CONFIG_GENERATE_ACPI_TABLE) += acpi_table.o
endif
obj-y += tables.o
ifndef CONFIG_SPL_BUILD
obj-$(CONFIG_CMD_ZBOOT) += zimage.o
endif
obj-$(CONFIG_USE_HOB) += hob.o
obj-$(CONFIG_HAVE_FSP) += fsp/
obj-$(CONFIG_FSP_VERSION1) += fsp1/
obj-$(CONFIG_FSP_VERSION2) += fsp2/
ifdef CONFIG_SPL_BUILD
ifdef CONFIG_TPL_BUILD
obj-y += tpl.o
else
obj-y += spl.o
endif
endif
lib-$(CONFIG_USE_PRIVATE_LIBGCC) += div64.o
ifeq ($(CONFIG_$(SPL_)X86_64),)
obj-$(CONFIG_EFI_APP) += crt0_ia32_efi.o reloc_ia32_efi.o
endif
ifneq ($(CONFIG_EFI_STUB),)
CFLAGS_REMOVE_reloc_ia32_efi.o += -mregparm=3
CFLAGS_reloc_ia32_efi.o += -fpic -fshort-wchar
# When building for 64-bit we must remove the i386-specific flags
CFLAGS_REMOVE_reloc_x86_64_efi.o += -mregparm=3 -march=i386 -m32
CFLAGS_reloc_x86_64_efi.o += -fpic -fshort-wchar -m64
AFLAGS_REMOVE_crt0_x86_64_efi.o += -mregparm=3 -march=i386 -m32
AFLAGS_crt0_x86_64_efi.o += -fpic -fshort-wchar -m64
extra-$(CONFIG_EFI_STUB_32BIT) += crt0_ia32_efi.o reloc_ia32_efi.o
extra-$(CONFIG_EFI_STUB_64BIT) += crt0_x86_64_efi.o reloc_x86_64_efi.o
endif
ifdef CONFIG_EFI_STUB
ifeq ($(CONFIG_$(SPL_)X86_64),)
extra-y += $(EFI_CRT0) $(EFI_RELOC)
endif
else
ifndef CONFIG_SPL_BUILD
ifneq ($(CONFIG_CMD_BOOTEFI_SELFTEST)$(CONFIG_CMD_BOOTEFI_HELLO_COMPILE),)
extra-y += $(EFI_CRT0) $(EFI_RELOC)
endif
endif
endif