Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-06 05:04:26 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/arch/arm/dts/zynqmp-zcu208-revA.dts

591 lines
14 KiB
Text
Raw Normal View History

arm64: zynqmp: Add support for zcu208 The board is very similar to zcu216 with zu49dr device. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-11-25 07:38:25 +00:00
// SPDX-License-Identifier: GPL-2.0+
/*
* dts file for Xilinx ZynqMP ZCU208
*
arm64: zynqmp: Update Copyright years to 2020 Trivial change. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-02-18 07:38:06 +00:00
* (C) Copyright 2017 - 2020, Xilinx, Inc.
arm64: zynqmp: Add support for zcu208 The board is very similar to zcu216 with zu49dr device. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-11-25 07:38:25 +00:00
*
* Michal Simek <michal.simek@xilinx.com>
*/
/dts-v1/;
#include "zynqmp.dtsi"
#include "zynqmp-clk-ccf.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/phy/phy.h>
/ {
model = "ZynqMP ZCU208 RevA";
compatible = "xlnx,zynqmp-zcu208-revA", "xlnx,zynqmp-zcu208", "xlnx,zynqmp";
aliases {
ethernet0 = &gem3;
gpio0 = &gpio;
i2c0 = &i2c0;
i2c1 = &i2c1;
mmc0 = &sdhci1;
rtc0 = &rtc;
serial0 = &uart0;
serial1 = &dcc;
spi0 = &qspi;
usb0 = &usb0;
};
chosen {
bootargs = "earlycon";
stdout-path = "serial0:115200n8";
xlnx,eeprom = &eeprom;
};
memory@0 {
device_type = "memory";
reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>;
};
gpio-keys {
compatible = "gpio-keys";
autorepeat;
sw19 {
label = "sw19";
gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_DOWN>;
arm64: zynqmp: Replace gpio-key,wakeup with wakeup source The same change has been done for Zynq by commit 1241c72b6db1 ("ARM: dts: zynq: replace gpio-key,wakeup with wakeup-source property") in mainline Linux kernel. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-02-18 11:06:14 +00:00
wakeup-source;
arm64: zynqmp: Add support for zcu208 The board is very similar to zcu216 with zu49dr device. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-11-25 07:38:25 +00:00
autorepeat;
};
};
leds {
compatible = "gpio-leds";
heartbeat_led {
label = "heartbeat";
gpios = <&gpio 23 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
};
};
ina226-vccint {
compatible = "iio-hwmon";
io-channels = <&vccint 0>, <&vccint 1>, <&vccint 2>, <&vccint 3>;
};
ina226-vccint-io-bram-ps {
compatible = "iio-hwmon";
io-channels = <&vccint_io_bram_ps 0>, <&vccint_io_bram_ps 1>, <&vccint_io_bram_ps 2>, <&vccint_io_bram_ps 3>;
};
ina226-vcc1v8 {
compatible = "iio-hwmon";
io-channels = <&vcc1v8 0>, <&vcc1v8 1>, <&vcc1v8 2>, <&vcc1v8 3>;
};
ina226-vcc1v2 {
compatible = "iio-hwmon";
io-channels = <&vcc1v2 0>, <&vcc1v2 1>, <&vcc1v2 2>, <&vcc1v2 3>;
};
ina226-vadj-fmc {
compatible = "iio-hwmon";
io-channels = <&vadj_fmc 0>, <&vadj_fmc 1>, <&vadj_fmc 2>, <&vadj_fmc 3>;
};
ina226-mgtavcc {
compatible = "iio-hwmon";
io-channels = <&mgtavcc 0>, <&mgtavcc 1>, <&mgtavcc 2>, <&mgtavcc 3>;
};
ina226-mgt1v2 {
compatible = "iio-hwmon";
io-channels = <&mgt1v2 0>, <&mgt1v2 1>, <&mgt1v2 2>, <&mgt1v2 3>;
};
ina226-mgt1v8 {
compatible = "iio-hwmon";
io-channels = <&mgt1v8 0>, <&mgt1v8 1>, <&mgt1v8 2>, <&mgt1v8 3>;
};
ina226-vccint-ams {
compatible = "iio-hwmon";
io-channels = <&vccint_ams 0>, <&vccint_ams 1>, <&vccint_ams 2>, <&vccint_ams 3>;
};
ina226-dac-avtt {
compatible = "iio-hwmon";
io-channels = <&dac_avtt 0>, <&dac_avtt 1>, <&dac_avtt 2>, <&dac_avtt 3>;
};
ina226-dac-avccaux {
compatible = "iio-hwmon";
io-channels = <&dac_avccaux 0>, <&dac_avccaux 1>, <&dac_avccaux 2>, <&dac_avccaux 3>;
};
ina226-adc-avcc {
compatible = "iio-hwmon";
io-channels = <&adc_avcc 0>, <&adc_avcc 1>, <&adc_avcc 2>, <&adc_avcc 3>;
};
ina226-adc-avccaux {
compatible = "iio-hwmon";
io-channels = <&adc_avccaux 0>, <&adc_avccaux 1>, <&adc_avccaux 2>, <&adc_avccaux 3>;
};
ina226-dac-avcc {
compatible = "iio-hwmon";
io-channels = <&dac_avcc 0>, <&dac_avcc 1>, <&dac_avcc 2>, <&dac_avcc 3>;
};
};
&dcc {
status = "okay";
};
&fpd_dma_chan1 {
status = "okay";
};
&fpd_dma_chan2 {
status = "okay";
};
&fpd_dma_chan3 {
status = "okay";
};
&fpd_dma_chan4 {
status = "okay";
};
&fpd_dma_chan5 {
status = "okay";
};
&fpd_dma_chan6 {
status = "okay";
};
&fpd_dma_chan7 {
status = "okay";
};
&fpd_dma_chan8 {
status = "okay";
};
&gem3 {
status = "okay";
phy-handle = <&phy0>;
phy-mode = "rgmii-id";
phy0: ethernet-phy@c {
reg = <0xc>;
ti,rx-internal-delay = <0x8>;
ti,tx-internal-delay = <0xa>;
ti,fifo-depth = <0x1>;
ti,dp83867-rxctrl-strap-quirk;
};
};
&gpio {
status = "okay";
gpio-line-names = "QSPI_LWR_CLK", "QSPI_LWR_DQ1", "QSPI_LWR_DQ2", "QSPI_LWR_DQ3", "QSPI_LWR_DQ0", /* 0 - 4 */
"QSPI_LWR_CS_B", "", "QSPI_UPR_CS_B", "QSPI_UPR_DQ0", "QSPI_UPR_DQ1", /* 5 - 9 */
"QSPI_UPR_DQ2", "QSPI_UPR_DQ3", "QSPI_UPR_CLK", "PS_GPIO2", "I2C0_SCL", /* 10 - 14 */
"I2C0_SDA", "I2C1_SCL", "I2C1_SDA", "UART0_TXD", "UART0_RXD", /* 15 - 19 */
"", "", "BUTTON", "LED", "", /* 20 - 24 */
"", "PMU_INPUT", "", "", "", /* 25 - 29 */
"", "", "PMU_GPO0", "PMU_GPO1", "PMU_GPO2", /* 30 - 34 */
"PMU_GPO3", "PMU_GPO4", "PMU_GPO5", "PS_GPIO1", "SDIO_SEL", /* 35 - 39 */
"SDIO_DIR_CMD", "SDIO_DIR_DAT0", "SDIO_DIR_DAT1", "", "", /* 40 - 44 */
"SDIO_DETECT", "SDIO_DAT0", "SDIO_DAT1", "SDIO_DAT2", "SDIO_DAT3", /* 45 - 49 */
"SDIO_CMD", "SDIO_CLK", "USB_CLK", "USB_DIR", "USB_DATA2", /* 50 - 54 */
"USB_NXT", "USB_DATA0", "USB_DATA1", "USB_STP", "USB_DATA3", /* 55 - 59 */
"USB_DATA4", "USB_DATA5", "USB_DATA6", "USB_DATA7", "ENET_TX_CLK", /* 60 - 64 */
"ENET_TX_D0", "ENET_TX_D1", "ENET_TX_D2", "ENET_TX_D3", "ENET_TX_CTRL", /* 65 - 69 */
"ENET_RX_CLK", "ENET_RX_D0", "ENET_RX_D1", "ENET_RX_D2", "ENET_RX_D3", /* 70 - 74 */
"ENET_RX_CTRL", "ENET_MDC", "ENET_MDIO", /* 75 - 77, MIO end and EMIO start */
"", "", /* 78 - 79 */
"", "", "", "", "", /* 80 - 84 */
"", "", "", "", "", /* 85 -89 */
"", "", "", "", "", /* 90 - 94 */
"", "", "", "", "", /* 95 - 99 */
"", "", "", "", "", /* 100 - 104 */
"", "", "", "", "", /* 105 - 109 */
"", "", "", "", "", /* 110 - 114 */
"", "", "", "", "", /* 115 - 119 */
"", "", "", "", "", /* 120 - 124 */
"", "", "", "", "", /* 125 - 129 */
"", "", "", "", "", /* 130 - 134 */
"", "", "", "", "", /* 135 - 139 */
"", "", "", "", "", /* 140 - 144 */
"", "", "", "", "", /* 145 - 149 */
"", "", "", "", "", /* 150 - 154 */
"", "", "", "", "", /* 155 - 159 */
"", "", "", "", "", /* 160 - 164 */
"", "", "", "", "", /* 165 - 169 */
"", "", "", ""; /* 170 - 174 */
};
&i2c0 {
status = "okay";
clock-frequency = <400000>;
tca6416_u15: gpio@20 { /* u15 */
compatible = "ti,tca6416";
reg = <0x20>;
gpio-controller; /* interrupt not connected */
#gpio-cells = <2>;
gpio-line-names = "MAX6643_OT_B", "MAX6643_FANFAIL_B", "MIO26_PMU_INPUT_LS", "DAC_AVTT_VOUT_SEL", /* 0 - 3 */
"", "IIC_MUX_RESET_B", "GEM3_EXP_RESET_B", "MAX6643_FULL_SPEED", /* 4 - 7 */
"FMCP_HSPC_PRSNT_M2C_B", "", "", "VCCINT_VRHOT_B", /* 10 - 13 */
"", "8A34001_EXP_RST_B", "IRPS5401_ALERT_B", "INA226_PMBUS_ALERT"; /* 14 - 17 */
};
i2c-mux@75 { /* u17 */
compatible = "nxp,pca9544";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x75>;
i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
/* PS_PMBUS */
/* PMBUS_ALERT done via pca9544 */
vccint: ina226@40 { /* u65 */
compatible = "ti,ina226";
#io-channel-cells = <1>;
label = "ina226-vccint";
reg = <0x40>;
shunt-resistor = <5000>;
};
vccint_io_bram_ps: ina226@41 { /* u57 */
compatible = "ti,ina226";
#io-channel-cells = <1>;
label = "ina226-vccint-io-bram-ps";
reg = <0x41>;
shunt-resistor = <5000>;
};
vcc1v8: ina226@42 { /* u60 */
compatible = "ti,ina226";
#io-channel-cells = <1>;
label = "ina226-vcc1v8";
reg = <0x42>;
shunt-resistor = <2000>;
};
vcc1v2: ina226@43 { /* u58 */
compatible = "ti,ina226";
#io-channel-cells = <1>;
label = "ina226-vcc1v2";
reg = <0x43>;
shunt-resistor = <5000>;
};
vadj_fmc: ina226@45 { /* u62 */
compatible = "ti,ina226";
#io-channel-cells = <1>;
label = "ina226-vadj-fmc";
reg = <0x45>;
shunt-resistor = <5000>;
};
mgtavcc: ina226@46 { /* u67 */
compatible = "ti,ina226";
#io-channel-cells = <1>;
label = "ina226-mgtavcc";
reg = <0x46>;
shunt-resistor = <2000>;
};
mgt1v2: ina226@47 { /* u63 */
compatible = "ti,ina226";
#io-channel-cells = <1>;
label = "ina226-mgt1v2";
reg = <0x47>;
shunt-resistor = <5000>;
};
mgt1v8: ina226@48 { /* u64 */
compatible = "ti,ina226";
#io-channel-cells = <1>;
label = "ina226-mgt1v8";
reg = <0x48>;
shunt-resistor = <5000>;
};
vccint_ams: ina226@49 { /* u61 */
compatible = "ti,ina226";
#io-channel-cells = <1>;
label = "ina226-vccint-ams";
reg = <0x49>;
shunt-resistor = <5000>;
};
dac_avtt: ina226@4a { /* u59 */
compatible = "ti,ina226";
#io-channel-cells = <1>;
label = "ina226-dac-avtt";
reg = <0x4a>;
shunt-resistor = <5000>;
};
dac_avccaux: ina226@4b { /* u124 */
compatible = "ti,ina226";
#io-channel-cells = <1>;
label = "ina226-dac-avccaux";
reg = <0x4b>;
shunt-resistor = <5000>;
};
adc_avcc: ina226@4c { /* u75 */
compatible = "ti,ina226";
#io-channel-cells = <1>;
label = "ina226-adc-avcc";
reg = <0x4c>;
shunt-resistor = <5000>;
};
adc_avccaux: ina226@4d { /* u71 */
compatible = "ti,ina226";
#io-channel-cells = <1>;
label = "ina226-adc-avccaux";
reg = <0x4d>;
shunt-resistor = <5000>;
};
dac_avcc: ina226@4e { /* u77 */
compatible = "ti,ina226";
#io-channel-cells = <1>;
label = "ina226-dac-avcc";
reg = <0x4e>;
shunt-resistor = <5000>;
};
};
i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
/* NC */
};
i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <2>;
/* u104 - ir35215 0x10/0x40 */
/* u127 - ir38164 0x1b/0x4b */
/* u112 - ir38164 0x13/0x43 */
/* u123 - ir38164 0x1c/0x4c */
arm64: zynqmp: Fix irps5401 device nodes - Do not use irps54012 as device node which is not correct. - Fix addresses of irps5401/u180 on zcu104 revisions. - Remove clock-cells property. It is PMIC without any clock output. - Define irps5401 nodes in zynqmp-e-a2197 Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-03-30 09:35:38 +00:00
irps5401_44: irps5401@44 { /* IRPS5401 - u53 */
arm64: zynqmp: Add support for zcu208 The board is very similar to zcu216 with zu49dr device. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-11-25 07:38:25 +00:00
compatible = "infineon,irps5401";
reg = <0x44>; /* i2c addr 0x14 */
};
arm64: zynqmp: Fix irps5401 device nodes - Do not use irps54012 as device node which is not correct. - Fix addresses of irps5401/u180 on zcu104 revisions. - Remove clock-cells property. It is PMIC without any clock output. - Define irps5401 nodes in zynqmp-e-a2197 Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-03-30 09:35:38 +00:00
irps5401_45: irps5401@45 { /* IRPS5401 - u55 */
arm64: zynqmp: Add support for zcu208 The board is very similar to zcu216 with zu49dr device. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-11-25 07:38:25 +00:00
compatible = "infineon,irps5401";
reg = <0x45>; /* i2c addr 0x15 */
};
/* J21 header too */
};
i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <3>;
/* SYSMON */
};
};
/* u38 MPS430 */
};
&i2c1 {
status = "okay";
clock-frequency = <400000>;
i2c-mux@74 {
compatible = "nxp,pca9548"; /* u20 */
#address-cells = <1>;
#size-cells = <0>;
reg = <0x74>;
/* FIXME reset-gpios = <&tca6416_u15 SYSCTLR_IIC_MUX0_RESET_B GPIO_ACTIVE_HIGH>; */
i2c_eeprom: i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
/*
* IIC_EEPROM 1kB memory which uses 256B blocks
* where every block has different address.
* 0 - 256B address 0x54
* 256B - 512B address 0x55
* 512B - 768B address 0x56
* 768B - 1024B address 0x57
*/
eeprom: eeprom@54 { /* u21 */
compatible = "atmel,24c128";
reg = <0x54>;
};
};
i2c_si5341: i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
si5341: clock-generator@36 { /* SI5341 - u43 */
compatible = "si5341";
reg = <0x36>;
};
};
i2c_si570_user_c0: i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <2>;
si570_1: clock-generator@5d { /* USER C0 SI570 - u47 */
#clock-cells = <0>;
compatible = "silabs,si570";
reg = <0x5d>;
temperature-stability = <50>;
factory-fout = <300000000>;
clock-frequency = <300000000>;
clock-output-names = "si570_user_c0";
};
};
i2c_si570_mgt: i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <3>;
si570_2: clock-generator@5d { /* USER MGT SI570 - u48 */
#clock-cells = <0>;
compatible = "silabs,si570";
reg = <0x5d>;
temperature-stability = <50>;
factory-fout = <156250000>;
clock-frequency = <148500000>;
clock-output-names = "si570_mgt";
};
};
i2c_8a34001: i2c@4 {
#address-cells = <1>;
#size-cells = <0>;
reg = <4>;
/* U409B - 8a34001 */
};
i2c_clk104: i2c@5 {
#address-cells = <1>;
#size-cells = <0>;
reg = <5>;
/* CLK104_SDA */
};
i2c@6 {
#address-cells = <1>;
#size-cells = <0>;
reg = <6>;
/* RFMCP connector */
};
/* 7 NC */
};
i2c-mux@75 {
compatible = "nxp,pca9548"; /* u22 */
#address-cells = <1>;
#size-cells = <0>;
reg = <0x75>;
/* FIXME reset-gpios = <&tca6416_u15 SYSCTLR_IIC_MUX0_RESET_B GPIO_ACTIVE_HIGH>; */
i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
/* FMCP_HSPC_IIC */
};
i2c_si570_user_c1: i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
si570_3: clock-generator@5d { /* USER C1 SI570 - u130 */
#clock-cells = <0>;
compatible = "silabs,si570";
reg = <0x5d>;
temperature-stability = <50>;
factory-fout = <300000000>;
clock-frequency = <300000000>;
clock-output-names = "si570_user_c1";
};
};
i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <2>;
/* SYSMON */
};
i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <3>;
/* DDR4 SODIMM */
};
i2c@4 {
#address-cells = <1>;
#size-cells = <0>;
reg = <4>;
/* SFP3 */
};
i2c@5 {
#address-cells = <1>;
#size-cells = <0>;
reg = <5>;
/* SFP2 */
};
i2c@6 {
#address-cells = <1>;
#size-cells = <0>;
reg = <6>;
/* SFP1 */
};
i2c@7 {
#address-cells = <1>;
#size-cells = <0>;
reg = <7>;
/* SFP0 */
};
};
/* MSP430 */
};
&qspi {
status = "okay";
is-dual = <1>;
flash@0 {
compatible = "m25p80", "jedec,spi-nor"; /* U11 and U12 MT25QU02GCBBE12 1Gb */
#address-cells = <1>;
#size-cells = <1>;
reg = <0>;
spi-tx-bus-width = <1>;
spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */
spi-max-frequency = <108000000>; /* Based on DC1 spec */
};
};
&rtc {
status = "okay";
};
&sata {
status = "okay";
/* SATA OOB timing settings */
ceva,p0-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>;
ceva,p0-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>;
ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
ceva,p1-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>;
ceva,p1-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>;
ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
phy-names = "sata-phy";
phys = <&lane3 PHY_TYPE_SATA 1 3 125000000>;
};
/* SD1 with level shifter */
&sdhci1 {
status = "okay";
disable-wp;
arm64: zynqmp: Add 'no-1-8-v' property for ZynqMP Boards Modify dts files to add 'no-1-8-v' property for all the ZynqMP boards. User can remove this property to enable the UHS mode. This is to keep the same speed (HS) modes across all the stages of the Linux Boot. Due to power cycling limitation of some of the ZynqMP boards, some SD cards don't get power cycled and are failing in Linux. Signed-off-by: Manish Narani <manish.narani@xilinx.com>
2020-02-14 06:37:30 +00:00
/*
* This property should be removed for supporting UHS mode
*/
no-1-8-v;
arm64: zynqmp: Add support for zcu208 The board is very similar to zcu216 with zu49dr device. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-11-25 07:38:25 +00:00
xlnx,mio_bank = <1>;
};
&serdes {
status = "okay";
};
&uart0 {
status = "okay";
};
/* ULPI SMSC USB3320 */
&usb0 {
status = "okay";
};
&dwc3_0 {
status = "okay";
dr_mode = "host";
snps,usb3_lpm_capable;
phy-names = "usb3-phy";
phys = <&lane2 PHY_TYPE_USB3 0 2 26000000>;
};
Reference in a new issue Copy permalink