u-boot/configs/zynq_zc770_xm013_defconfig

CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="ZC770_XM013"
CONFIG_ARM=y
CONFIG_ZYNQ=y
CONFIG_TARGET_ZYNQ_ZC770=y
CONFIG_OF_CONTROL=y
CONFIG_DEFAULT_DEVICE_TREE="zynq-zc770-xm013"
# CONFIG_SYS_MALLOC_F is not set
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_FIT_SIGNATURE=y
CONFIG_DM=y
kconfig: add board Kconfig and defconfig files This commit adds: - arch/${ARCH}/Kconfig provide a menu to select target boards - board/${VENDOR}/${BOARD}/Kconfig or board/${BOARD}/Kconfig set CONFIG macros to the appropriate values for each board - configs/${TARGET_BOARD}_defconfig default setting of each board (This commit was automatically generated by a conversion script based on boards.cfg) In Linux Kernel, defconfig files are located under arch/${ARCH}/configs/ directory. It works in Linux Kernel since ARCH is always given from the command line for cross compile. But in U-Boot, ARCH is not given from the command line. Which means we cannot know ARCH until the board configuration is done. That is why all the "*_defconfig" files should be gathered into a single directory ./configs/. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Simon Glass <sjg@chromium.org> 2014-07-30 05:08:14 +00:00			`CONFIG_SPL=y`
			`CONFIG_SYS_EXTRA_OPTIONS="ZC770_XM013"`
kconfig: remove meaningless prefixes in defconfig files Since commit e02ee2548afe (kconfig: switch to single .config configuration), the prefixes in defconfig files such as "+S:", "+ST:", etc., are meaningless. This commit was generated by the following command: find configs -name '_defconfig' \| xargs sed -i 's/^+ST://' Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> 2015-03-12 04:24:39 +00:00			`CONFIG_ARM=y`
			`CONFIG_ZYNQ=y`
			`CONFIG_TARGET_ZYNQ_ZC770=y`
kconfig: move CONFIG_OF_* to Kconfig This commit moves: CONFIG_OF_CONTROL CONFIG_OF_SEPARATE CONFIG_OF_EMBED CONFIG_OF_HOSTFILE Because these options are currently not supported for SPL, the "Device Tree Control" menu does not appear in the SPL configuration. Note: zynq-common.h should be adjusted so as not to change the default value of CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Simon Glass <sjg@chromium.org> Cc: Stephen Warren <swarren@nvidia.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Acked-by: Michal Simek <michal.simek@xilinx.com> 2014-09-22 10:59:05 +00:00			`CONFIG_OF_CONTROL=y`
kconfig: move CONFIG_DEFAULT_DEVICE_TREE to kconfig This option specifies the default Device Tree used for the run-time configuration of U-Boot. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Simon Glass <sjg@chromium.org> Cc: Stephen Warren <swarren@nvidia.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Michal Simek <michal.simek@xilinx.com> 2014-09-22 10:59:06 +00:00			`CONFIG_DEFAULT_DEVICE_TREE="zynq-zc770-xm013"`
ARM: zynq: disable CONFIG_SYS_MALLOC_F to fix MMC boot Since commit 326a682358c1 (malloc_f: enable SYS_MALLOC_F by default if DM is on), Zynq MMC boot hangs up after printing the following: U-Boot SPL 2015.04-rc5-00053-gadcc570 (Apr 08 2015 - 12:59:11) mmc boot reading system.dtb Prior to commit 326a682358c1, Zynq boards enabled CONFIG_DM, but not CONFIG_SYS_MALLOC_F. That commit forcibly turned on CONFIG_SYS_MALLOC_F. I have not figured out the root cause, but anyway it looks like CONFIG_SYS_MALLOC_F gave a bad impact on the Zynq MMC boot. We are planning to have the v2015.04 release in a few days. I know this is a defensive fixup, but what I can do now is to add # CONFIG_SYS_MALLOC_F is not set to every Zynq defconfig file to get back the original behavior. Tested on: - Zedboard - ZC706 board Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Tested-by: Michal Simek <michal.simek@xilinx.com> Cc: Simon Glass <sjg@chromium.org> 2015-04-08 05:25:50 +00:00			`# CONFIG_SYS_MALLOC_F is not set`
configs: Move CONFIG_FIT_SIGNATURE to defconfig For the platforms which use,CONFIG_FIT_SIGNATURE, the required configs are moved to the platform's defconfig file. Selecting CONFIG_FIT_SIGNATURE using defconfig automatically resolves the dependencies for signature verification. The RSA library gets automatically selected and user does not have to define CONFIG_RSA manually. Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com> CC: Simon Glass <sjg@chromium.org> Acked-by: Simon Glass <sjg@chromium.org> 2015-01-23 10:31:53 +00:00			`CONFIG_FIT=y`
			`CONFIG_FIT_VERBOSE=y`
			`CONFIG_FIT_SIGNATURE=y`
lib/rsa: Modify rsa to use DM driver Modify rsa_verify to use the rsa driver of DM library .The tools will continue to use the same RSA sw library. CONFIG_RSA is now dependent on CONFIG_DM. All configurations which enable FIT based signatures have been modified to enable CONFIG_DM by default. Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com> CC: Simon Glass <sjg@chromium.org> Acked-by: Simon Glass <sjg@chromium.org> 2015-01-23 10:31:54 +00:00			`CONFIG_DM=y`