u-boot/arch/arm/mach-stm32mp/include/mach/ddr.h

/* SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause */
/*
 * Copyright (C) 2018, STMicroelectronics - All Rights Reserved
 */

#ifndef __MACH_STM32MP_DDR_H_
#define __MACH_STM32MP_DDR_H_

/* DDR power initializations */
enum ddr_type {
	STM32MP_DDR3,
	STM32MP_LPDDR2_16,
	STM32MP_LPDDR2_32,
	STM32MP_LPDDR3_16,
	STM32MP_LPDDR3_32,
};

int board_ddr_power_init(enum ddr_type ddr_type);

#endif
SPDX: Convert all of our multiple license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have multiple licenses (in these cases, dual license) declared in the SPDX-License-Identifier tag. In this case we change from listing "LICENSE-A LICENSE-B" or "LICENSE-A or LICENSE-B" or "(LICENSE-A OR LICENSE-B)" to "LICENSE-A OR LICENSE-B" as per the Linux Kernel style document. Note that parenthesis are allowed so when they were used before we continue to use them. Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com> 2018-05-06 22:27:01 +00:00			`/* SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause */`
ram: stm32mp1: add driver Add driver and binding for stm32mp1 ddr controller and phy Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> 2018-03-12 09:46:11 +00:00			`/*`
			`* Copyright (C) 2018, STMicroelectronics - All Rights Reserved`
			`*/`

			`#ifndef __MACH_STM32MP_DDR_H_`
			`#define __MACH_STM32MP_DDR_H_`

stm32mp1: ram: add support for LPDDR2/LPDDR3 Manage power supply configuration for board using stpmic1 with LPDDR2 or with LPDDR3: + VDD_DDR1 = 1.8V with BUCK3 (bypass if possible) + VDD_DDR2 = 1.2V with BUCK2 Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> 2019-04-10 12:09:26 +00:00			`/* DDR power initializations */`
			`enum ddr_type {`
			`STM32MP_DDR3,`
ram: stm32mp1: increase vdd2_ddr: buck2 for 32bits LPDDR Need to increase the LPDDR2/LPDDR3 the voltage vdd2_ddr: buck2 form 1.2V to 1.25V for 32bits configuration. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Acked-by: Patrice Chotard <patrice.chotard@st.com> 2020-03-06 10:14:03 +00:00			`STM32MP_LPDDR2_16,`
			`STM32MP_LPDDR2_32,`
			`STM32MP_LPDDR3_16,`
			`STM32MP_LPDDR3_32,`
stm32mp1: ram: add support for LPDDR2/LPDDR3 Manage power supply configuration for board using stpmic1 with LPDDR2 or with LPDDR3: + VDD_DDR1 = 1.8V with BUCK3 (bypass if possible) + VDD_DDR2 = 1.2V with BUCK2 Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> 2019-04-10 12:09:26 +00:00			`};`

			`int board_ddr_power_init(enum ddr_type ddr_type);`
ram: stm32mp1: add driver Add driver and binding for stm32mp1 ddr controller and phy Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> 2018-03-12 09:46:11 +00:00
			`#endif`