u-boot/include/configs/socfpga_sr1500.h

/* SPDX-License-Identifier: GPL-2.0+ */
/*
 * Copyright (C) 2015 Stefan Roese <sr@denx.de>
 */
#ifndef __CONFIG_SOCFPGA_SR1500_H__
#define __CONFIG_SOCFPGA_SR1500_H__

#include <asm/arch/base_addr_ac5.h>

/* Memory configurations */
#define PHYS_SDRAM_1_SIZE		0x40000000	/* 1GiB on SR1500 */

/* Ethernet on SoC (EMAC) */
#define CONFIG_PHY_INTERFACE_MODE	PHY_INTERFACE_MODE_RGMII
/* The PHY is autodetected, so no MII PHY address is needed here */
#define PHY_ANEG_TIMEOUT	8000

/* Enable SPI NOR flash reset, needed for SPI booting */
#define CONFIG_SPI_N25Q256A_RESET

/*
 * Bootcounter
 */
#define CONFIG_SYS_BOOTCOUNT_BE

/* Environment setting for SPI flash */

/* The rest of the configuration is shared */
#include <configs/socfpga_common.h>

#endif	/* __CONFIG_SOCFPGA_SR1500_H__ */
SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com> 2018-05-06 21:58:06 +00:00			`/* SPDX-License-Identifier: GPL-2.0+ */`
arm: socfpga: Add SoCFPGA SR1500 board The SR1500 board is a CycloneV based board, similar to the EBV SoCrates, equipped with the following devices: - SPI NOR - eMMC - Ethernet Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Marek Vasut <marex@denx.de> Cc: Pavel Machek <pavel@denx.de> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Acked-by: Pavel Machek <pavel@denx.de> 2015-11-18 10:06:09 +00:00			`/*`
			`* Copyright (C) 2015 Stefan Roese <sr@denx.de>`
			`*/`
			`#ifndef __CONFIG_SOCFPGA_SR1500_H__`
			`#define __CONFIG_SOCFPGA_SR1500_H__`

			`#include <asm/arch/base_addr_ac5.h>`

			`/* Memory configurations */`
			`#define PHYS_SDRAM_1_SIZE 0x40000000 /* 1GiB on SR1500 */`

			`/* Ethernet on SoC (EMAC) */`
			`#define CONFIG_PHY_INTERFACE_MODE PHY_INTERFACE_MODE_RGMII`
			`/* The PHY is autodetected, so no MII PHY address is needed here */`
			`#define PHY_ANEG_TIMEOUT 8000`

			`/* Enable SPI NOR flash reset, needed for SPI booting */`
			`#define CONFIG_SPI_N25Q256A_RESET`

			`/*`
			`* Bootcounter`
			`*/`
			`#define CONFIG_SYS_BOOTCOUNT_BE`

			`/* Environment setting for SPI flash */`
arm: socfpga: sr1500: Misc updates (SPI speed, env location) This patch makes the following changes to the SR1500 board port: - Update defconfig to support SPI NOR (use make savedefconfig). - Increase SPI speed to a maximum of 100MHz for faster system bootup. - Change environment location, so that its not between SPL and main U-Boot. This way the combined SPL / U-Boot image can be used for updates. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Marek Vasut <marex@denx.de> 2016-03-03 15:57:39 +00:00
arm: socfpga: Fix SR1500 env position Move the inclusion of the common socfpga configuration file further down in the sr1500 configuration, so that the socfpga_common.h can check if environment is in SPI NOR and it's location is defined and if it is not, define default location. This fixes "arm: socfpga: Enabling U-Boot environment support in QSPI" which introduced a minor warning. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Dinh Nguyen <dinh.linux@gmail.com> Cc: Pavel Machek <pavel@denx.de> Cc: Marek Vasut <marex@denx.de> Cc: Stefan Roese <sr@denx.de> 2016-02-26 18:11:30 +00:00			`/* The rest of the configuration is shared */`
			`#include <configs/socfpga_common.h>`

arm: socfpga: Add SoCFPGA SR1500 board The SR1500 board is a CycloneV based board, similar to the EBV SoCrates, equipped with the following devices: - SPI NOR - eMMC - Ethernet Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Marek Vasut <marex@denx.de> Cc: Pavel Machek <pavel@denx.de> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Acked-by: Pavel Machek <pavel@denx.de> 2015-11-18 10:06:09 +00:00			`#endif /* __CONFIG_SOCFPGA_SR1500_H__ */`