u-boot/drivers/mtd/nand/nand_bch.c

225 lines
6 KiB
C
Raw Normal View History

/*
* This file provides ECC correction for more than 1 bit per block of data,
* using binary BCH codes. It relies on the generic BCH library lib/bch.c.
*
* Copyright © 2011 Ivan Djelic <ivan.djelic@parrot.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
/*#include <asm/io.h>*/
#include <linux/types.h>
#include <linux/bitops.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/nand_bch.h>
#include <linux/bch.h>
#include <malloc.h>
/**
* struct nand_bch_control - private NAND BCH control structure
* @bch: BCH control structure
* @ecclayout: private ecc layout for this BCH configuration
* @errloc: error location array
* @eccmask: XOR ecc mask, allows erased pages to be decoded as valid
*/
struct nand_bch_control {
struct bch_control *bch;
struct nand_ecclayout ecclayout;
unsigned int *errloc;
unsigned char *eccmask;
};
/**
* nand_bch_calculate_ecc - [NAND Interface] Calculate ECC for data block
* @mtd: MTD block structure
* @buf: input buffer with raw data
* @code: output buffer with ECC
*/
int nand_bch_calculate_ecc(struct mtd_info *mtd, const unsigned char *buf,
unsigned char *code)
{
const struct nand_chip *chip = mtd->priv;
struct nand_bch_control *nbc = chip->ecc.priv;
unsigned int i;
memset(code, 0, chip->ecc.bytes);
encode_bch(nbc->bch, buf, chip->ecc.size, code);
/* apply mask so that an erased page is a valid codeword */
for (i = 0; i < chip->ecc.bytes; i++)
code[i] ^= nbc->eccmask[i];
return 0;
}
/**
* nand_bch_correct_data - [NAND Interface] Detect and correct bit error(s)
* @mtd: MTD block structure
* @buf: raw data read from the chip
* @read_ecc: ECC from the chip
* @calc_ecc: the ECC calculated from raw data
*
* Detect and correct bit errors for a data byte block
*/
int nand_bch_correct_data(struct mtd_info *mtd, unsigned char *buf,
unsigned char *read_ecc, unsigned char *calc_ecc)
{
const struct nand_chip *chip = mtd->priv;
struct nand_bch_control *nbc = chip->ecc.priv;
unsigned int *errloc = nbc->errloc;
int i, count;
count = decode_bch(nbc->bch, NULL, chip->ecc.size, read_ecc, calc_ecc,
NULL, errloc);
if (count > 0) {
for (i = 0; i < count; i++) {
if (errloc[i] < (chip->ecc.size*8))
/* error is located in data, correct it */
buf[errloc[i] >> 3] ^= (1 << (errloc[i] & 7));
/* else error in ecc, no action needed */
MTDDEBUG(MTD_DEBUG_LEVEL0, "%s: corrected bitflip %u\n",
__func__, errloc[i]);
}
} else if (count < 0) {
printk(KERN_ERR "ecc unrecoverable error\n");
count = -1;
}
return count;
}
/**
* nand_bch_init - [NAND Interface] Initialize NAND BCH error correction
* @mtd: MTD block structure
* @eccsize: ecc block size in bytes
* @eccbytes: ecc length in bytes
* @ecclayout: output default layout
*
* Returns:
* a pointer to a new NAND BCH control structure, or NULL upon failure
*
* Initialize NAND BCH error correction. Parameters @eccsize and @eccbytes
* are used to compute BCH parameters m (Galois field order) and t (error
* correction capability). @eccbytes should be equal to the number of bytes
* required to store m*t bits, where m is such that 2^m-1 > @eccsize*8.
*
* Example: to configure 4 bit correction per 512 bytes, you should pass
* @eccsize = 512 (thus, m=13 is the smallest integer such that 2^m-1 > 512*8)
* @eccbytes = 7 (7 bytes are required to store m*t = 13*4 = 52 bits)
*/
struct nand_bch_control *
nand_bch_init(struct mtd_info *mtd, unsigned int eccsize, unsigned int eccbytes,
struct nand_ecclayout **ecclayout)
{
unsigned int m, t, eccsteps, i;
struct nand_ecclayout *layout;
struct nand_bch_control *nbc = NULL;
unsigned char *erased_page;
if (!eccsize || !eccbytes) {
printk(KERN_WARNING "ecc parameters not supplied\n");
goto fail;
}
m = fls(1+8*eccsize);
t = (eccbytes*8)/m;
nbc = kzalloc(sizeof(*nbc), GFP_KERNEL);
if (!nbc)
goto fail;
nbc->bch = init_bch(m, t, 0);
if (!nbc->bch)
goto fail;
/* verify that eccbytes has the expected value */
if (nbc->bch->ecc_bytes != eccbytes) {
printk(KERN_WARNING "invalid eccbytes %u, should be %u\n",
eccbytes, nbc->bch->ecc_bytes);
goto fail;
}
eccsteps = mtd->writesize/eccsize;
/* if no ecc placement scheme was provided, build one */
if (!*ecclayout) {
/* handle large page devices only */
if (mtd->oobsize < 64) {
printk(KERN_WARNING "must provide an oob scheme for "
"oobsize %d\n", mtd->oobsize);
goto fail;
}
layout = &nbc->ecclayout;
layout->eccbytes = eccsteps*eccbytes;
/* reserve 2 bytes for bad block marker */
if (layout->eccbytes+2 > mtd->oobsize) {
printk(KERN_WARNING "no suitable oob scheme available "
"for oobsize %d eccbytes %u\n", mtd->oobsize,
eccbytes);
goto fail;
}
/* put ecc bytes at oob tail */
for (i = 0; i < layout->eccbytes; i++)
layout->eccpos[i] = mtd->oobsize-layout->eccbytes+i;
layout->oobfree[0].offset = 2;
layout->oobfree[0].length = mtd->oobsize-2-layout->eccbytes;
*ecclayout = layout;
}
/* sanity checks */
if (8*(eccsize+eccbytes) >= (1 << m)) {
printk(KERN_WARNING "eccsize %u is too large\n", eccsize);
goto fail;
}
if ((*ecclayout)->eccbytes != (eccsteps*eccbytes)) {
printk(KERN_WARNING "invalid ecc layout\n");
goto fail;
}
nbc->eccmask = kmalloc(eccbytes, GFP_KERNEL);
nbc->errloc = kmalloc(t*sizeof(*nbc->errloc), GFP_KERNEL);
if (!nbc->eccmask || !nbc->errloc)
goto fail;
/*
* compute and store the inverted ecc of an erased ecc block
*/
erased_page = kmalloc(eccsize, GFP_KERNEL);
if (!erased_page)
goto fail;
memset(erased_page, 0xff, eccsize);
memset(nbc->eccmask, 0, eccbytes);
encode_bch(nbc->bch, erased_page, eccsize, nbc->eccmask);
kfree(erased_page);
for (i = 0; i < eccbytes; i++)
nbc->eccmask[i] ^= 0xff;
return nbc;
fail:
nand_bch_free(nbc);
return NULL;
}
/**
* nand_bch_free - [NAND Interface] Release NAND BCH ECC resources
* @nbc: NAND BCH control structure
*/
void nand_bch_free(struct nand_bch_control *nbc)
{
if (nbc) {
free_bch(nbc->bch);
kfree(nbc->errloc);
kfree(nbc->eccmask);
kfree(nbc);
}
}