mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-14 08:57:58 +00:00
44 lines
1.5 KiB
Text
44 lines
1.5 KiB
Text
|
GPIO via CREG (control registers) driver
|
||
|
|
|
||
|
|
31 9 7 5 0 < bit number
|
||
|
|
| | | | |
|
||
|
|
[ not used | gpio-1 | gpio-0 | <-shift-> ] < 32 bit register
|
||
|
|
^ ^
|
||
|
|
| |
|
||
|
|
write 0x2 == set output to "1" (activate)
|
||
|
|
write 0x3 == set output to "0" (deactivate)
|
||
|
|
|
||
|
|
Required properties:
|
||
|
|
- compatible : "snps,creg-gpio"
|
||
|
|
- reg : Exactly one register range with length 0x4.
|
||
|
|
- #gpio-cells : Should be one - the pin number.
|
||
|
|
- gpio-controller : Marks the device node as a GPIO controller.
|
||
|
|
- gpio-count: Number of GPIO pins.
|
||
|
|
- gpio-bit-per-line: Number of bits per gpio line (see picture).
|
||
|
|
- gpio-first-shift: Shift (in bits) of the first GPIO field in register
|
||
|
|
(see picture).
|
||
|
|
- gpio-activate-val: Value should be set in corresponding field to set
|
||
|
|
output to "1" (see picture). Applied to all GPIO ports.
|
||
|
|
- gpio-deactivate-val: Value should be set in corresponding field to set
|
||
|
|
output to "0" (see picture). Applied to all GPIO ports.
|
||
|
|
|
||
|
|
Optional properties:
|
||
|
|
- gpio-bank-name: name of bank (as default driver name is used is used)
|
||
|
|
- gpio-default-val: array of default output values (must me 0 or 1)
|
||
|
|
|
||
|
|
Example (see picture):
|
||
|
|
|
||
|
|
gpio: gpio@f00014b0 {
|
||
|
|
compatible = "snps,creg-gpio";
|
||
|
|
reg = <0xf00014b0 0x4>;
|
||
|
|
gpio-controller;
|
||
|
|
#gpio-cells = <1>;
|
||
|
|
gpio-bank-name = "hsdk-spi-cs";
|
||
|
|
gpio-count = <2>;
|
||
|
|
gpio-first-shift = <5>;
|
||
|
|
gpio-bit-per-line = <2>;
|
||
|
|
gpio-activate-val = <2>;
|
||
|
|
gpio-deactivate-val = <3>;
|
||
|
|
gpio-default-val = <1 1>;
|
||
|
|
};
|