u-boot/configs/Bananapro_defconfig

CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI,USB_EHCI"
CONFIG_FDTFILE="sun7i-a20-bananapro.dtb"
CONFIG_USB1_VBUS_PIN="PH0"
CONFIG_USB2_VBUS_PIN="PH1"
CONFIG_GMAC_TX_DELAY=3
+S:CONFIG_ARM=y
+S:CONFIG_ARCH_SUNXI=y
+S:CONFIG_MACH_SUN7I=y
+S:CONFIG_DRAM_CLK=432
+S:CONFIG_DRAM_ZQ=127
+S:CONFIG_DRAM_EMR1=4
sun7i: Add new Bananapro board / defconfig Add support for the new Bananapro A20 development board from lemaker.org. This board features 1G RAM, 2 USB A receptacles, 1 micro USB receptacle for OTG, 1 micro USB receptacle for power, HDMI, sata, Gbit ethernet, ir receiver, 3.5 mm jack for a/v out, on board microphone, 40 gpio pins and sdio wifi. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk> 2014-12-31 10:30:26 +00:00			`CONFIG_SPL=y`
			`CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI,USB_EHCI"`
			`CONFIG_FDTFILE="sun7i-a20-bananapro.dtb"`
			`CONFIG_USB1_VBUS_PIN="PH0"`
			`CONFIG_USB2_VBUS_PIN="PH1"`
sunxi: Add a GMAC Transmit Clock Delay Chain Kconfig option And use this to set the GMAC Transmit Clock Delay Chain value on Banana boards, rather then keying of CONFIG_TARGET_FOO. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk> 2015-01-25 11:10:48 +00:00			`CONFIG_GMAC_TX_DELAY=3`
sun7i: Add new Bananapro board / defconfig Add support for the new Bananapro A20 development board from lemaker.org. This board features 1G RAM, 2 USB A receptacles, 1 micro USB receptacle for OTG, 1 micro USB receptacle for power, HDMI, sata, Gbit ethernet, ir receiver, 3.5 mm jack for a/v out, on board microphone, 40 gpio pins and sdio wifi. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk> 2014-12-31 10:30:26 +00:00			`+S:CONFIG_ARM=y`
			`+S:CONFIG_ARCH_SUNXI=y`
			`+S:CONFIG_MACH_SUN7I=y`
sunxi: Convert sun7i boards to use auto dram configuration Currently we've separate detailed dram settings for all sun7i boards, this moves them over to using auto dram configuration so that we can get rid of all the per board dram_foo.c files. This has been tested on a A20-Olinuxino-Lime, A20-Olinuxino_MICRO, Bananapi, Bananapro, Cubieboard2, Cubietruck, Mele_M3 and a Linksprite_pcDuino3. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk> 2015-01-21 19:26:03 +00:00			`+S:CONFIG_DRAM_CLK=432`
			`+S:CONFIG_DRAM_ZQ=127`
			`+S:CONFIG_DRAM_EMR1=4`